Antoine Tenart says:

====================
net: macsec: fix key length when offloading

The key length used to copy the key to offloading drivers and to store
it is wrong and was working by chance as it matched the default key
length. But using a different key length fails. Fix it by using instead
the max length accepted in uAPI to store the key and the actual key
length when copying it.

This was tested on the MSCC PHY driver but not on the Atlantic MAC
(looking at the code it looks ok, but testing would be appreciated).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The key length used to store the macsec key was set to MACSEC_KEYID_LEN
(16), which is an issue as:
- This was never meant to be the key length.
- The key length can be > 16.

Fix this by using MACSEC_MAX_KEY_LEN instead (the max length accepted in
uAPI).

Fixes: 27736563 ("net: atlantic: MACSec egress offload implementation")
Fixes: 9ff40a75 ("net: atlantic: MACSec ingress offload implementation")
Reported-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The key length used to store the macsec key was set to MACSEC_KEYID_LEN
(16), which is an issue as:
- This was never meant to be the key length.
- The key length can be > 16.

Fix this by using MACSEC_MAX_KEY_LEN instead (the max length accepted in
uAPI).

Fixes: 28c5107a ("net: phy: mscc: macsec support")
Reported-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The key length used when offloading macsec to Ethernet or PHY drivers
was set to MACSEC_KEYID_LEN (16), which is an issue as:
- This was never meant to be the key length.
- The key length can be > 16.

Fix this by using MACSEC_MAX_KEY_LEN to store the key (the max length
accepted in uAPI) and secy->key_len to copy it.

Fixes: 3cf3227a ("net: macsec: hardware offloading infrastructure")
Reported-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2021-06-24

this is a pull request of 2 patches for net/master.

The first patch is by Norbert Slusarek and prevent allocation of
filter for optlen == 0 in the j1939 CAN protocol.

The last patch is by Stephane Grosjean and fixes a potential
starvation in the TX path of the peak_pciefd driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Sukadev Bhattiprolu says:

====================
ibmvnic: Assorted bug fixes

Assorted bug fixes that we tested over the last several weeks.

Thanks to Brian King, Cris Forno, Dany Madden and Rick Lindsley for
reviews and help with testing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Parenthesize a check to be more explicit and to fix a sparse warning
seen on some distros.

Fixes: 91dc5d25 ("ibmvnic: fix miscellaneous checks")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Free tx_pool and clear it, if allocation of tso_pool fails.

release_tx_pools() assumes we have both tx and tso_pools if ->tx_pool is
non-NULL. If allocation of tso_pool fails in init_tx_pools(), the assumption
will not be true and we would end up dereferencing ->tx_buff, ->free_map
fields from a NULL pointer.

Fixes: 3205306c ("ibmvnic: Update TX pool initialization routine")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

free_long_term_buff() checks ltb->buff to decide whether we have a long
term buffer to free. So set ltb->buff to NULL afer freeing. While here,
also clear ->map_id, fix up some coding style and log an error.

Fixes: 9c4eaabd ("Check CRQ command return codes")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This fixes a crash in replenish_rx_pool() when called from ibmvnic_poll()
after a previous call to replenish_rx_pool() encountered an error when
allocating a socket buffer.

Thanks to Rick Lindsley and Dany Madden for helping debug the crash.

Fixes: 4f0b6812 ("ibmvnic: Introduce batched RX buffer descriptor transmission")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We batch subordinate command response queue (scrq) descriptors that we
need to send to the VIOS using an "indirect" buffer. If after we queue
one or more scrqs in the indirect buffer encounter an error (say fail
to allocate an skb), we leave the queued scrq descriptors in the
indirect buffer until the next call to ibmvnic_xmit().

On the next call to ibmvnic_xmit(), it is possible that the adapter is
going through a reset and it is possible that the long term  buffers
have been unmapped on the VIOS side. If we proceed to flush (send) the
packets that are in the indirect buffer, we will end up using the old
map ids and this can cause the VIOS to trigger an unnecessary FATAL
error reset.

Instead of flushing packets remaining on the indirect_buff, discard
(clean) them instead.

Fixes: 0d973388 ("ibmvnic: Introduce xmit_more support using batched subCRQ hcalls")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 7c451f3e.

When a vnic interface is taken down and then up, connectivity is not
restored. We bisected it to this commit. Reverting this commit until
we can fully investigate the issue/benefit of the change.

Fixes: 7c451f3e ("ibmvnic: remove duplicate napi_schedule call in open function")
Reported-by: Cristobal Forno <cforno12@linux.ibm.com>
Reported-by: Abdul Haleem <abdhalee@in.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 1c7d45e7.

We tried to optimize the number of hcalls we send and skipped sending
the REQUEST_MAP calls for some maps. However during resets, we need to
resend all the maps to the VIOS since the VIOS does not remember the
old values. In fact we may have failed over to a new VIOS which will
not have any of the mappings.

When we send packets with map ids the VIOS does not know about, it
triggers a FATAL reset. While the client does recover from the FATAL
error reset, we are seeing a large number of such resets. Handling
FATAL resets is lot more unnecessary work than issuing a few more
hcalls so revert the commit and resend the maps to the VIOS.

Fixes: 1c7d45e7 ("ibmvnic: simplify reset_long_term_buff function")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rather than just indicating that transmission can start, this patch
requires the explicit flushing of the network TX queue when the driver
is informed by the device that it can transmit, next to its
configuration.

In this way, if frames have already been written by the application,
they will actually be transmitted.

Fixes: ffd137f7 ("can: peak/pcie_fd: remove useless code when interface starts")
Link: https://lore.kernel.org/r/20210623142600.149904-1-s.grosjean@peak-system.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

If optval != NULL and optlen == 0 are specified for SO_J1939_FILTER in
j1939_sk_setsockopt(), memdup_sockptr() will return ZERO_PTR for 0
size allocation. The new filter will be mistakenly assigned ZERO_PTR.
This patch checks for optlen != 0 and filter will be assigned NULL in
case of optlen == 0.

Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol")
Link: https://lore.kernel.org/r/20210620123842.117975-1-nslusarek@gmx.netSigned-off-by: Norbert Slusarek <nslusarek@gmx.net>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Daniel Borkmann says:

====================
pull-request: bpf 2021-06-23

The following pull-request contains BPF updates for your *net* tree.

We've added 14 non-merge commits during the last 6 day(s) which contain
a total of 13 files changed, 137 insertions(+), 64 deletions(-).

Note that when you merge net into net-next, there is a small merge conflict
between 9f2470fb ("skmsg: Improve udp_bpf_recvmsg() accuracy") from bpf
with c49661aa ("skmsg: Remove unused parameters of sk_msg_wait_data()")
from net-next. Resolution is to: i) net/ipv4/udp_bpf.c: take udp_msg_wait_data()
and remove err parameter from the function, ii) net/ipv4/tcp_bpf.c: take
tcp_msg_wait_data() and remove err parameter from the function, iii) for
net/core/skmsg.c and include/linux/skmsg.h: remove the sk_msg_wait_data()
implementation and its prototype in header.

The main changes are:

1) Fix BPF poke descriptor adjustments after insn rewrite, from John Fastabend.

2) Fix regression when using BPF_OBJ_GET with non-O_RDWR flags, from Maciej Żenczykowski.

3) Various bug and error handling fixes for UDP-related sock_map, from Cong Wang.

4) Fix patching of vmlinux BTF IDs with correct endianness, from Tony Ambardar.

5) Two fixes for TX descriptor validation in AF_XDP, from Magnus Karlsson.

6) Fix overflow in size calculation for bpf_map_area_alloc(), from Bui Quang Minh.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

I see no reason why max_dst_opts_cnt and max_hbh_opts_cnt
are fetched from the initial net namespace.

The other sysctls (max_dst_opts_len & max_hbh_opts_len)
are in fact already using the current ns.

Note: it is not clear why ipv6_destopt_rcv() use two ways to
get to the netns :

 1) dev_net(dst->dev)
    Originally used to increment IPSTATS_MIB_INHDRERRORS

 2) dev_net(skb->dev)
     Tom used this variant in his patch.

Maybe this calls to use ipv6_skb_net() instead ?

Fixes: 47d3d7ac ("ipv6: Implement limits on Hop-by-Hop and Destination options")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@quantonium.net>
Cc: Coco Li <lixiaoyan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Broadcom UniMAC MDIO bus from mdio-bcm-unimac module comes too late.
So, GENET cannot find the ethernet PHY on UniMAC MDIO bus. This leads
GENET fail to attach the PHY as following log:

bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
...
could not attach to PHY
bcmgenet fd580000.ethernet eth0: failed to connect to PHY
uart-pl011 fe201000.serial: no DMA platform data
libphy: bcmgenet MII bus: probed
...
unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus

This patch adds the soft dependency to load mdio-bcm-unimac module
before genet module to avoid the issue.

Fixes: 9a4e7969 ("net: bcmgenet: utilize generic Broadcom UniMAC MDIO controller driver")
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=213485Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit 3c9ef511 ("bonding: avoid adding slave device with
IFF_MASTER flag") fix a crash when add slave device with IFF_MASTER,
but it rejects the scenario of nested bonding device.

As Eric Dumazet described: since there indeed is a usage scenario about
nesting bonding, we should not break it.

So we add a new judgment condition to allow nesting of bonding device.

Fixes: 3c9ef511 ("bonding: avoid adding slave device with IFF_MASTER flag")
Suggested-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Di Zhu <zhudi21@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2021-06-23

1) Don't return a mtu smaller than 1280 on IPv6 pmtu discovery.
   From Sabrina Dubroca

2) Fix seqcount rcu-read side in xfrm_policy_lookup_bytype
   for the PREEMPT_RT case. From Varad Gautam.

3) Remove a repeated declaration of xfrm_parse_spi.
   From Shaokun Zhang.

4) IPv4 beet mode can't handle fragments, but IPv6 does.
   commit 68dc022d ("xfrm: BEET mode doesn't support
   fragments for inner packets") handled IPv4 and IPv6
   the same way. Relax the check for IPv6 because fragments
   are possible here. From Xin Long.

5) Memory allocation failures are not reported for
   XFRMA_ENCAP and XFRMA_COADDR in xfrm_state_construct.
   Fix this by moving both cases in front of the function.

6) Fix a missing initialization in the xfrm offload fallback
   fail case for bonding devices. From Ayush Sawal.

Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Nicolas Dichtel updates MAINTAINERS file to add Netfilter IRC channel.

2) Skip non-IPv6 packets in nft_exthdr.

3) Skip non-TCP packets in nft_osf.

4) Skip non-TCP/UDP packets in nft_tproxy.

5) Memleak in hardware offload infrastructure when counters are used
   for first time in a rule.

6) The VLAN transfer routine must use FLOW_DISSECTOR_KEY_BASIC instead
   of FLOW_DISSECTOR_KEY_CONTROL. Moreover, make a more robust check
   for 802.1q and 802.1ad to restore simple matching on transport
   protocols.

7) Fix bogus EPERM when listing a ruleset when table ownership flag
   is set on.

8) Honor table ownership flag when table is referenced by handle.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The sub-programs prog->aux->poke_tab[] is populated in jit_subprogs() and
then used when emitting 'BPF_JMP|BPF_TAIL_CALL' insn->code from the
individual JITs. The poke_tab[] to use is stored in the insn->imm by
the code adding it to that array slot. The JIT then uses imm to find the
right entry for an individual instruction. In the x86 bpf_jit_comp.c
this is done by calling emit_bpf_tail_call_direct with the poke_tab[]
of the imm value.

However, we observed the below null-ptr-deref when mixing tail call
programs with subprog programs. For this to happen we just need to
mix bpf-2-bpf calls and tailcalls with some extra calls or instructions
that would be patched later by one of the fixup routines. So whats
happening?

Before the fixup_call_args() -- where the jit op is done -- various
code patching is done by do_misc_fixups(). This may increase the
insn count, for example when we patch map_lookup_up using map_gen_lookup
hook. This does two things. First, it means the instruction index,
insn_idx field, of a tail call instruction will move by a 'delta'.

In verifier code,

 struct bpf_jit_poke_descriptor desc = {
  .reason = BPF_POKE_REASON_TAIL_CALL,
  .tail_call.map = BPF_MAP_PTR(aux->map_ptr_state),
  .tail_call.key = bpf_map_key_immediate(aux),
  .insn_idx = i + delta,
 };

Then subprog start values subprog_info[i].start will be updated
with the delta and any poke descriptor index will also be updated
with the delta in adjust_poke_desc(). If we look at the adjust
subprog starts though we see its only adjusted when the delta
occurs before the new instructions,

        /* NOTE: fake 'exit' subprog should be updated as well. */
        for (i = 0; i <= env->subprog_cnt; i++) {
                if (env->subprog_info[i].start <= off)
                        continue;

Earlier subprograms are not changed because their start values
are not moved. But, adjust_poke_desc() does the offset + delta
indiscriminately. The result is poke descriptors are potentially
corrupted.

Then in jit_subprogs() we only populate the poke_tab[]
when the above insn_idx is less than the next subprogram start. From
above we corrupted our insn_idx so we might incorrectly assume a
poke descriptor is not used in a subprogram omitting it from the
subprogram. And finally when the jit runs it does the deref of poke_tab
when emitting the instruction and crashes with below. Because earlier
step omitted the poke descriptor.

The fix is straight forward with above context. Simply move same logic
from adjust_subprog_starts() into adjust_poke_descs() and only adjust
insn_idx when needed.

[   82.396354] bpf_testmod: version magic '5.12.0-rc2alu+ SMP preempt mod_unload ' should be '5.12.0+ SMP preempt mod_unload '
[   82.623001] loop10: detected capacity change from 0 to 8
[   88.487424] ==================================================================
[   88.487438] BUG: KASAN: null-ptr-deref in do_jit+0x184a/0x3290
[   88.487455] Write of size 8 at addr 0000000000000008 by task test_progs/5295
[   88.487471] CPU: 7 PID: 5295 Comm: test_progs Tainted: G          I       5.12.0+ #386
[   88.487483] Hardware name: Dell Inc. Precision 5820 Tower/002KVM, BIOS 1.9.2 01/24/2019
[   88.487490] Call Trace:
[   88.487498]  dump_stack+0x93/0xc2
[   88.487515]  kasan_report.cold+0x5f/0xd8
[   88.487530]  ? do_jit+0x184a/0x3290
[   88.487542]  do_jit+0x184a/0x3290
 ...
[   88.487709]  bpf_int_jit_compile+0x248/0x810
 ...
[   88.487765]  bpf_check+0x3718/0x5140
 ...
[   88.487920]  bpf_prog_load+0xa22/0xf10

Fixes: a748c697 ("bpf: propagate poke descriptors to subprograms")
Reported-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Daniel Borkmann <daniel@iogearbox.net>

When changing number of TX queues using ethtool:

	# ethtool -L eth0 tx 1
	[  135.301047] Unable to handle kernel paging request at virtual address 00000000af5d0000
	[...]
	[  135.525128] Call trace:
	[  135.525142]  dma_release_from_dev_coherent+0x2c/0xb0
	[  135.525148]  dma_free_attrs+0x54/0xe0
	[  135.525156]  k3_cppi_desc_pool_destroy+0x50/0xa0
	[  135.525164]  am65_cpsw_nuss_remove_tx_chns+0x88/0xdc
	[  135.525171]  am65_cpsw_set_channels+0x3c/0x70
	[...]

This is because k3_cppi_desc_pool_destroy() which is called after
k3_udma_glue_release_tx_chn() in am65_cpsw_nuss_remove_tx_chns()
references struct device that is unregistered at the end of
k3_udma_glue_release_tx_chn()

Therefore the right order is to call k3_cppi_desc_pool_destroy() and
destroy desc pool before calling k3_udma_glue_release_tx_chn().
Fix this throughout the driver.

Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Resetting software indexes in bcm4908_dma_alloc_buf_descs() is not
enough as it's called during device probe only. Driver resets DMA on
every .ndo_open callback and it's required to reset indexes then.

This fixes inconsistent rings state and stalled traffic after interface
down & up sequence.

Fixes: 4feffead ("net: broadcom: bcm4908enet: add BCM4908 controller driver")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

When doing source address validation, the flowi4 struct used for
fib_lookup should be in the reverse direction to the given skb.
fl4_dport and fl4_sport returned by fib4_rules_early_flow_dissect
should thus be swapped.

Fixes: 5a847a6e ("net/ipv4: Initialize proto and ports in flow struct")
Signed-off-by: Miao Wang <shankerwangmiao@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The following steps will definitely cause the kernel to crash:
	ip link add vrf1 type vrf table 1
	modprobe bonding.ko max_bonds=1
	echo "+vrf1" >/sys/class/net/bond0/bonding/slaves
	rmmod bonding

The root cause is that: When the VRF is added to the slave device,
it will fail, and some cleaning work will be done. because VRF device
has IFF_MASTER flag, cleanup process  will not clear the IFF_BONDING flag.
Then, when we unload the bonding module, unregister_netdevice_notifier()
will treat the VRF device as a bond master device and treat netdev_priv()
as struct bonding{} which actually is struct net_vrf{}.

By analyzing the processing logic of bond_enslave(), it seems that
it is not allowed to add the slave device with the IFF_MASTER flag, so
we need to add a code check for this situation.
Signed-off-by: Di Zhu <zhudi21@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 6c11fbf9 ("ip6_tunnel: add MPLS transmit support")
moved assiging inner_ipproto down from ipxip6_tnl_xmit() to
its callee ip6_tnl_xmit(). The latter is also used by GRE.

Since commit 38720352 ("gre: Use inner_proto to obtain inner
header protocol") GRE had been depending on skb->inner_protocol
during segmentation. It sets it in gre_build_header() and reads
it in gre_gso_segment(). Changes to ip6_tnl_xmit() overwrite
the protocol, resulting in GSO skbs getting dropped.

Note that inner_protocol is a union with inner_ipproto,
GRE uses the former while the change switched it to the latter
(always setting it to just IPPROTO_GRE).

Restore the original location of skb_set_inner_ipproto(),
it is unclear why it was moved in the first place.

Fixes: 6c11fbf9 ("ip6_tunnel: add MPLS transmit support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mat Martineau says:

====================
mptcp: Fixes for v5.13

Here are two MPTCP fixes from Paolo.

Patch 1 fixes some possible connect-time race conditions with
MPTCP-level connection state changes.

Patch 2 deletes a duplicate function declaration.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 78962489 ("mptcp: add skeleton to sync msk socket
options to subflows") introduced a duplicate declaration of
mptcp_setsockopt(), just drop it.
Reported-by: Florian Westphal <fw@strlen.de>
Fixes: 78962489 ("mptcp: add skeleton to sync msk socket options to subflows")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The msk socket state is currently updated in a few spots without
owning the msk socket lock itself.

Some of such operations are safe, as they happens before exposing
the msk socket to user-space and can't race with other changes.

A couple of them, at connect time, can actually race with close()
or shutdown(), leaving breaking the socket state machine.

This change addresses the issue moving such update under the msk
socket lock with the usual:

<acquire spinlock>
<check sk lock onwers>
<ev defer to release_cb>

scheme.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/56
Fixes: 8fd73804 ("mptcp: fallback in case of simultaneous connect")
Fixes: c3c123d1 ("net: mptcp: don't hang in mptcp_sendmsg() after TCP fallback")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In 32-bit architecture, the result of sizeof() is a 32-bit integer so
the expression becomes the multiplication between 2 32-bit integer which
can potentially leads to integer overflow. As a result,
bpf_map_area_alloc() allocates less memory than needed.

Fix this by casting 1 operand to u64.

Fixes: 0d2c4f96 ("bpf: Eliminate rlimit-based memory accounting for sockmap and sockhash maps")
Fixes: 99c51064 ("devmap: Use bpf_map_area_alloc() for allocating hash buckets")
Fixes: 546ac1ff ("bpf: add devmap, a map for storing net device references")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210613143440.71975-1-minhquangbui99@gmail.com

The fail path of efx_ef10_sriov_alloc_vf_vswitching is identical to the
full content of efx_ef10_sriov_free_vf_vswitching, so replace it for a
single call to efx_ef10_sriov_free_vf_vswitching.
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

During SRIOV disabling it is checked wether any VF is currently attached
to a guest, using pci_vfs_assigned function. However, this check only
works with VFs attached with Xen, not with vfio/KVM. Added comments
clarifying this point.

Also, replaced manual check of PCI_DEV_FLAGS_ASSIGNED flag and used the
helper function pci_is_dev_assigned instead.
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If SRIOV cannot be disabled during device removal or module unloading,
return error code so it can be logged properly in the calling function.

Note that this can only happen if any VF is currently attached to a
guest using Xen, but not with vfio/KVM. Despite that in that case the
VFs won't work properly with PF removed and/or the module unloaded, I
have let it as is because I don't know what side effects may have
changing it, and also it seems to be the same that other drivers are
doing in this situation.

In the case of being called during SRIOV reconfiguration, the behavior
hasn't changed because the function is called with force=false.
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If pci_remove was called for a PF with VFs, the removal of the VFs was
called twice from efx_ef10_sriov_fini: one directly with pci_driver->remove
and another implicit by calling pci_disable_sriov, which also perform
the VFs remove. This was leading to crashing the kernel on the second
attempt.

Given that pci_disable_sriov already calls to pci remove function, get
rid of the direct call to pci_driver->remove from the driver.

2 different ways to trigger the bug:
- Create one or more VFs, then attach the PF to a virtual machine (at
  least with qemu/KVM)
- Create one or more VFs, then remove the PF with:
  echo 1 > /sys/bus/pci/devices/PF_PCI_ID/remove

Removing sfc module does not trigger the error, at least for me, because
it removes the VF first, and then the PF.

Example of a log with the error:
    list_del corruption, ffff967fd20a8ad0->next is LIST_POISON1 (dead000000000100)
    ------------[ cut here ]------------
    kernel BUG at lib/list_debug.c:47!
    [...trimmed...]
    RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x4c
    [...trimmed...]
    Call Trace:
    efx_dissociate+0x1f/0x140 [sfc]
    efx_pci_remove+0x27/0x150 [sfc]
    pci_device_remove+0x3b/0xc0
    device_release_driver_internal+0x103/0x1f0
    pci_stop_bus_device+0x69/0x90
    pci_stop_and_remove_bus_device+0xe/0x20
    pci_iov_remove_virtfn+0xba/0x120
    sriov_disable+0x2f/0xe0
    efx_ef10_pci_sriov_disable+0x52/0x80 [sfc]
    ? pcie_aer_is_native+0x12/0x40
    efx_ef10_sriov_fini+0x72/0x110 [sfc]
    efx_pci_remove+0x62/0x150 [sfc]
    pci_device_remove+0x3b/0xc0
    device_release_driver_internal+0x103/0x1f0
    unbind_store+0xf6/0x130
    kernfs_fop_write+0x116/0x190
    vfs_write+0xa5/0x1a0
    ksys_write+0x4f/0xb0
    do_syscall_64+0x5b/0x1a0
    entry_SYSCALL_64_after_hwframe+0x65/0xca
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot complained in neigh_reduce(), because rcu_read_lock_bh()
is treated differently than rcu_read_lock()

WARNING: suspicious RCU usage
5.13.0-rc6-syzkaller #0 Not tainted
-----------------------------
include/net/addrconf.h:313 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
3 locks held by kworker/0:0/5:
 #0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline]
 #0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: atomic64_set include/asm-generic/atomic-instrumented.h:856 [inline]
 #0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: atomic_long_set include/asm-generic/atomic-long.h:41 [inline]
 #0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: set_work_data kernel/workqueue.c:617 [inline]
 #0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: set_work_pool_and_clear_pending kernel/workqueue.c:644 [inline]
 #0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x871/0x1600 kernel/workqueue.c:2247
 #1: ffffc90000ca7da8 ((work_completion)(&port->wq)){+.+.}-{0:0}, at: process_one_work+0x8a5/0x1600 kernel/workqueue.c:2251
 #2: ffffffff8bf795c0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1da/0x3130 net/core/dev.c:4180

stack backtrace:
CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.13.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events ipvlan_process_multicast
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x141/0x1d7 lib/dump_stack.c:120
 __in6_dev_get include/net/addrconf.h:313 [inline]
 __in6_dev_get include/net/addrconf.h:311 [inline]
 neigh_reduce drivers/net/vxlan.c:2167 [inline]
 vxlan_xmit+0x34d5/0x4c30 drivers/net/vxlan.c:2919
 __netdev_start_xmit include/linux/netdevice.h:4944 [inline]
 netdev_start_xmit include/linux/netdevice.h:4958 [inline]
 xmit_one net/core/dev.c:3654 [inline]
 dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3670
 __dev_queue_xmit+0x2133/0x3130 net/core/dev.c:4246
 ipvlan_process_multicast+0xa99/0xd70 drivers/net/ipvlan/ipvlan_core.c:287
 process_one_work+0x98d/0x1600 kernel/workqueue.c:2276
 worker_thread+0x64c/0x1120 kernel/workqueue.c:2422
 kthread+0x3b1/0x4a0 kernel/kthread.c:313
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294

Fixes: f564f45c ("vxlan: add ipv6 proxy support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit d37300ed ("bpf: program: Refuse non-O_RDWR flags
in BPF_OBJ_GET"). It breaks Android userspace which expects to be able to
fetch programs with just read permissions.

See: https://cs.android.com/android/platform/superproject/+/master:frameworks/libs/net/common/native/bpf_syscall_wrappers/include/BpfSyscallWrappers.h;drc=7005c764be23d31fa1d69e826b4a2f6689a8c81e;l=124

Side-note: another option to fix it would be to extend bpf_prog_new_fd()
and to pass in used file mode flags in the same way as we do for maps via
bpf_map_new_fd(). Meaning, they'd end up in anon_inode_getfd() and thus
would be retained for prog fd operations with bpf() syscall. Right now
these flags are not checked with progs since they are immutable for their
lifetime (as opposed to maps which can be updated from user space). In
future this could potentially change with new features, but at that point
it's still fine to do the bpf_prog_new_fd() extension when needed. For a
simple stable fix, a revert is less churn.

Fixes: d37300ed ("bpf: program: Refuse non-O_RDWR flags in BPF_OBJ_GET")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
[ Daniel: added side-note to commit message ]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Acked-by: Greg Kroah-Hartman <gregkh@google.com>
Link: https://lore.kernel.org/bpf/20210618105526.265003-1-zenczykowski@gmail.com

nft_table_lookup_byhandle() also needs to validate the netlink PortID
owner when deleting a table by handle.

Fixes: 6001a930 ("netfilter: nftables: introduce table ownership")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

nft_table_lookup() allows us to obtain the table object by the name and
the family. The netlink portID validation needs to be skipped for the
dump path, since the ownership only applies to commands to update the
given table. Skip validation if the specified netlink PortID is zero
when calling nft_table_lookup().

Fixes: 6001a930 ("netfilter: nftables: introduce table ownership")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

In case of xfrm offload, if xdo_dev_state_add() of driver returns
-EOPNOTSUPP, xfrm offload fallback is failed.
In xfrm state_add() both xso->dev and xso->real_dev are initialized to
dev and when err(-EOPNOTSUPP) is returned only xso->dev is set to null.

So in this scenario the condition in func validate_xmit_xfrm(),
if ((x->xso.dev != dev) && (x->xso.real_dev == dev))
                return skb;
returns true, due to which skb is returned without calling esp_xmit()
below which has fallback code. Hence the CRYPTO_FALLBACK is failing.

So fixing this with by keeping x->xso.real_dev as NULL when err is
returned in func xfrm_dev_state_add().

Fixes: bdfd2d1f ("bonding/xfrm: use real_dev instead of slave_dev")
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>