- 15 Sep, 2021 3 commits
-
-
Peter Ujfalusi authored
i.MX8 only uses SOF_FW_BLK_TYPE_IRAM (1) and SOF_FW_BLK_TYPE_SRAM (3) bars, everything else is left as 0 in sdev->bar[] array. If a broken or purposefully crafted firmware image is loaded with other types of FW_BLK_TYPE then a kernel crash can be triggered. Make sure that only IRAM/SRAM type is converted to bar index. Fixes: afb93d71 ("ASoC: SOF: imx: Add i.MX8M HW support") Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20210915122116.18317-6-peter.ujfalusi@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Peter Ujfalusi authored
i.MX8 only uses SOF_FW_BLK_TYPE_IRAM (1) and SOF_FW_BLK_TYPE_SRAM (3) bars, everything else is left as 0 in sdev->bar[] array. If a broken or purposefully crafted firmware image is loaded with other types of FW_BLK_TYPE then a kernel crash can be triggered. Make sure that only IRAM/SRAM type is converted to bar index. Fixes: 202acc56 ("ASoC: SOF: imx: Add i.MX8 HW support") Signed-off-by:
-
Yong Zhi authored
Fix @buf arg given to hex_dump_to_buffer() and stack address used in dump error output. Fixes: e657c18a ('ASoC: SOF: Add xtensa support') Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
-
- 10 Sep, 2021 7 commits
-
-
Mark Brown authored
Merge series "ASoC: fsl: register platform component before registering cpu dai" from Shengjiu Wang <shengjiu.wang@nxp.com>: There is no defer probe when adding platform component to snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime() snd_soc_register_card() -> snd_soc_bind_card() -> snd_soc_add_pcm_runtime() -> adding cpu dai -> adding codec dai -> adding platform component. So if the platform component is not ready at that time, then the sound card still registered successfully, but platform component is empty, the sound card can't be used. As there is defer probe checking for cpu dai component, then register platform component before cpu dai to avoid such issue. This patch set is to fix this issue for SAI, ESAI, MICFIL, SPDIF, XCVR drivers. Shengjiu Wang (5): ASoC: fsl_sai: register platform component before registering cpu dai ASoC: fsl_esai: register platform component before registering cpu dai ASoC: fsl_micfil: register platform component before registering cpu dai ASoC: fsl_spdif: register platform component before registering cpu dai ASoC: fsl_xcvr: register platform component before registering cpu dai sound/soc/fsl/fsl_esai.c | 16 ++++++++++------ sound/soc/fsl/fsl_micfil.c | 15 ++++++++++----- sound/soc/fsl/fsl_sai.c | 14 +++++++++----- sound/soc/fsl/fsl_spdif.c | 14 +++++++++----- sound/soc/fsl/fsl_xcvr.c | 15 ++++++++++----- 5 files changed, 48 insertions(+), 26 deletions(-) -- 2.17.1 -
Trevor Wu authored
When memory allocation for afe->reg_back_up fails, reg_back_up can't be used. Keep the suspend/resume flow but skip register backup when afe->reg_back_up is NULL, in case illegal memory access happens. Fixes: 283b6124 ("ASoC: mediatek: implement mediatek common structure") Signed-off-by:
Trevor Wu <trevor.wu@mediatek.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20210910092613.30188-1-trevor.wu@mediatek.comSigned-off-by:
-
Shengjiu Wang authored
There is no defer probe when adding platform component to snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime() snd_soc_register_card() -> snd_soc_bind_card() -> snd_soc_add_pcm_runtime() -> adding cpu dai -> adding codec dai -> adding platform component. So if the platform component is not ready at that time, then the sound card still registered successfully, but platform component is empty, the sound card can't be used. As there is defer probe checking for cpu dai component, then register platform component before cpu dai to avoid such issue. Fixes: 28564486 ("ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver") Signed-off-by:Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1630665006-31437-6-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Shengjiu Wang authored
There is no defer probe when adding platform component to snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime() snd_soc_register_card() -> snd_soc_bind_card() -> snd_soc_add_pcm_runtime() -> adding cpu dai -> adding codec dai -> adding platform component. So if the platform component is not ready at that time, then the sound card still registered successfully, but platform component is empty, the sound card can't be used. As there is defer probe checking for cpu dai component, then register platform component before cpu dai to avoid such issue. Fixes: a2388a49 ("ASoC: fsl: Add S/PDIF CPU DAI driver") Signed-off-by: -
Shengjiu Wang authored
There is no defer probe when adding platform component to snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime() snd_soc_register_card() -> snd_soc_bind_card() -> snd_soc_add_pcm_runtime() -> adding cpu dai -> adding codec dai -> adding platform component. So if the platform component is not ready at that time, then the sound card still registered successfully, but platform component is empty, the sound card can't be used. As there is defer probe checking for cpu dai component, then register platform component before cpu dai to avoid such issue. Fixes: 47a70e6f ("ASoC: Add MICFIL SoC Digital Audio Interface driver.") Signed-off-by: -
Shengjiu Wang authored
There is no defer probe when adding platform component to snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime() snd_soc_register_card() -> snd_soc_bind_card() -> snd_soc_add_pcm_runtime() -> adding cpu dai -> adding codec dai -> adding platform component. So if the platform component is not ready at that time, then the sound card still registered successfully, but platform component is empty, the sound card can't be used. As there is defer probe checking for cpu dai component, then register platform component before cpu dai to avoid such issue. Fixes: 43d24e76 ("ASoC: fsl_esai: Add ESAI CPU DAI driver") Signed-off-by: -
Shengjiu Wang authored
There is no defer probe when adding platform component to snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime() snd_soc_register_card() -> snd_soc_bind_card() -> snd_soc_add_pcm_runtime() -> adding cpu dai -> adding codec dai -> adding platform component. So if the platform component is not ready at that time, then the sound card still registered successfully, but platform component is empty, the sound card can't be used. As there is defer probe checking for cpu dai component, then register platform component before cpu dai to avoid such issue. Fixes: 43550821 ("ASoC: Add SAI SoC Digital Audio Interface driver") Signed-off-by:
-
- 09 Sep, 2021 3 commits
-
-
Arnaud Pouliquen authored
The 00d38fd8d2524 ("MAINTAINERS: update references to stm32 audio bindings") commit update the bindings reference, by removing bindings/sound/st,stm32-adfsdm.txt, to set the new reference to bindings/iio/adc/st,stm32-*.yaml. This leads to "get_maintainer finds" the match for the Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml, but also to the IIO bindings Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml And The commit fixes only a part of the problem: Documentation/devicetree/bindings/sound/st,stm32-*.txt file have been also moved to yaml. Update references to include all stm32 audio bindings file and exclude the st,stm32-adc.yaml bindings file. cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Fixes: 0d38fd8d ("MAINTAINERS: update references to stm32 audio bindings") Signed-off-by:Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Link: https://lore.kernel.org/r/20210909145449.24388-1-arnaud.pouliquen@foss.st.comSigned-off-by:
-
Trevor Wu authored
Because SND_SOC_MT8195 depends on COMPILE_TEST, it's possible to build MT8195 driver in many different config combinations. Add all dependent config for SND_SOC_MT8195 in case some errors happen when COMPILE_TEST is enabled. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20210909065533.2114-1-trevor.wu@mediatek.comSigned-off-by:
-
Pierre-Louis Bossart authored
The SoundWire BEs make use of 'stream' functions for .prepare and .trigger. These functions will in turn force a Bank Switch, which implies a wait operation. Mark SoundWire BEs as nonatomic for consistency, but keep all other types of BEs as is. The initialization of .nonatomic is done outside of the create_sdw_dailink helper to avoid adding more parameters to deal with a single exception to the rule that BEs are atomic. Suggested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
Bard Liao <bard.liao@intel.com> Link: https://lore.kernel.org/r/20210907184436.33152-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
- 03 Sep, 2021 3 commits
-
-
Sugar Zhang authored
This patch adds lock to fix comcurrency between tx/rx to fix 'rockchip-i2s ff070000.i2s; fail to clear' Considering the situation; tx stream rx stream | | | disable enable | | reset After this patch: lock | tx stream | enable | unlock -------- --------- lock | rx stream | disable | reset | unlock Signed-off-by:Sugar Zhang <sugar.zhang@rock-chips.com> Link: https://lore.kernel.org/r/1630674434-650-1-git-send-email-sugar.zhang@rock-chips.comSigned-off-by:
-
Trevor Wu authored
According to the description in dt-bindings, phandle assignment of HDMI TX and DP TX are not required properties, but driver regards them as required properties. In real use case, it's expected that DP TX and HDMI TX are optional features, so correct the behavior in driver. Fixes: 40d605df ("ASoC: mediatek: mt8195: add machine driver with mt6359, rt1019 and rt5682") Signed-off-by:
-
Nathan Chancellor authored
When CONFIG_SND_SOC_INTEL_SOUNDWIRE_SOF_MACH is enabled without CONFIG_EXPERT, there is a Kconfig warning about unmet dependencies: WARNING: unmet direct dependencies detected for SND_SOC_SDW_MOCKUP Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && EXPERT [=n] && SOUNDWIRE [=y] Selected by [y]: - SND_SOC_INTEL_SOUNDWIRE_SOF_MACH [=y] && ... Selecting a symbol does not account for dependencies. There are three ways to resolve this: 1. Make CONFIG_SND_SOC_INTEL_SOUNDWIRE_SOF_MACH select CONFIG_SND_SOC_SDW_MOCKUP only if CONFIG_EXPERT is set. 2. Make CONFIG_SND_SOC_SDW_MOCKUP's prompt depend on CONFIG_EXPERT so that it can be selected by options that only depend on CONFIG_SOUNDWIRE but still appear as a prompt to the user when CONFIG_EXPERT is set. 3. Make CONFIG_SND_SOC_INTEL_SOUNDWIRE_SOF_MACH imply CONFIG_SND_SOC_SDW_MOCKUP, which will select CONFIG_SND_SOC_SDW_MOCKUP when its dependencies are enabled but still allow the user to disable it. Go with the third option as it gives the most flexibility while retaining the original intent of the select. Fixes: 0ccac3bc ("ASoC: Intel: boards: sof_sdw: add SoundWire mockup codecs for tests") Suggested-by:
Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20210902181217.2958966-1-nathan@kernel.orgSigned-off-by:
-
- 02 Sep, 2021 1 commit
-
-
Shengjiu Wang authored
Add compatible string for i.MX8ULP platform which support audio function through rpmsg audio channel on M core. Signed-off-by:
-
- 01 Sep, 2021 7 commits
-
-
Shuming Fan authored
Remove CBJ power off setting to avoid floating state. Signed-off-by:
Jack Yu <jack.yu@realtek.com> Signed-off-by:
Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20210901100754.21045-1-shumingf@realtek.comSigned-off-by:
-
Mark Brown authored
ASoC: Updates for v5.15 Quite a quiet release this time, mostly a combination of cleanups and a good set of new drivers. - Lots of cleanups and improvements to the Intel drivers, including some new systems support. - New support for AMD Vangoh, CUI CMM-4030D-261, Mediatek Mt8195, Renesas RZ/G2L Mediatek Mt8195, RealTek RT101P, Renesas RZ/G2L,, Rockchip RK3568 S/PDIF.
-
Trevor Wu authored
Drop the use of the defines including clock and power id, so that we can remove the headers which are not applied in the example. Fixes: b5bac34f ("dt-bindings: mediatek: mt8195: add audio afe document") Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210831083956.9804-1-trevor.wu@mediatek.comSigned-off-by:
-
Geert Uytterhoeven authored
The Mediatek MT8195 sound hardware is only present on Mediatek MT8195 SoCs. Hence add a dependency on ARCH_MEDIATEK, to prevent asking the user about this driver when configuring a kernel without Mediatek SoC support. Fixes: 6746cc85 ("ASoC: mediatek: mt8195: add platform driver") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/7e628e359bde04ceb9ddd74a45931059b4a4623c.1630415860.git.geert+renesas@glider.beSigned-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_err error message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210827185003.507006-1-colin.king@canonical.comSigned-off-by:
-
Kuninori Morimoto authored
commit 63f2f9cc ("ASoC: audio-graph: remove Platform support") removed Platform support from audio-graph, because it doesn't have "plat" support on DT (simple-card has). But, Platform support is needed if user is using snd_dmaengine_pcm_register() which adds generic DMA as Platform. And this Platform dev is using CPU dev. Without this patch, at least STM32MP15 audio sound card is no more functional (v5.13 or later). This patch respawn Platform Support on audio-graph again. Reported-by:
Olivier MOYSAN <olivier.moysan@foss.st.com> Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by:
-
Trevor Wu authored
randconfig builds show the warning below, WARNING: unmet direct dependencies detected for SND_SOC_MT6359 Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && MTK_PMIC_WRAP [=n] Selected by [y]: - SND_SOC_MT8195_MT6359_RT1019_RT5682 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && I2C [=y] && SND_SOC_MT8195 [=y] Add a dependency to avoid it. Signed-off-by:
-
- 30 Aug, 2021 3 commits
-
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
These have turned up some issues in further testing. Signed-off-by:
-
- 26 Aug, 2021 13 commits
-
-
Mark Brown authored
Merge series "ASoC: wcd9335: Firx some resources leak in the probe and remove function" from Christophe JAILLET <christophe.jaillet@wanadoo.fr>: The first 2 patches are sraightforward and look logical to me. However, the 3rd one in purely speculative. It is based on the fact that a comment states that we enable some irqs on some slave ports. That said, it writes 0xFF in some registers. So, I guess that we should disable these irqs when the driver is removed. That said, writing 0x00 at the same place looks logical to me. This cis untested and NOT based on any documentation. Just a blind fix. Review with care. You'll be warned :) Christophe JAILLET (3): ASoC: wcd9335: Fix a double irq free in the remove function ASoC: wcd9335: Fix a memory leak in the error handling path of the probe function ASoC: wcd9335: Disable irq on slave ports in the remove function sound/soc/codecs/wcd9335.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) -- 2.30.2 -
Pierre-Louis Bossart authored
On start/pause_release/resume, when more than one FE is connected to the same BE, it's possible that the trigger is sent more than once. This is not desirable, we only want to trigger a BE once, which is straightforward to implement with a refcount. For stop/pause/suspend, the problem is more complicated: the check implemented in snd_soc_dpcm_can_be_free_stop() may fail due to a conceptual deadlock when we trigger the BE before the FE. In this case, the FE states have not yet changed, so there are corner cases where the TRIGGER_STOP is never sent - the dual case of start where multiple triggers might be sent. This patch suggests an unconditional trigger in all cases, without checking the FE states, using a refcount protected by a spinlock. Signed-off-by:
-
Pierre-Louis Bossart authored
When more than one FE is connected to a BE, e.g. in a mixing use case, the BE can be triggered multiple times when the FE are opened/started concurrently. This race condition is problematic in the case of SoundWire BE dailinks, and this is not desirable in a general case. The code carefully checks when the BE can be stopped or hw_free'ed, but the trigger code does not use any mutual exclusion. Fix by using the same spinlock already used to check FE states, and set the state before the trigger. In case of errors, the initial state will be restored. This patch does not change how the triggers are handled, it only makes sure the states are handled in critical sections. Signed-off-by:
-
Christophe JAILLET authored
The probe calls 'wcd9335_setup_irqs()' to enable interrupts on all slave ports. This must be undone in the remove function. Add a 'wcd9335_teardown_irqs()' function that undoes 'wcd9335_setup_irqs()' function, and call it from the remove function. Fixes: 20aedafd ("ASoC: wcd9335: add support to wcd9335 codec") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Message-Id: <8f761244d79bd4c098af8a482be9121d3a486d1b.1629091028.git.christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe JAILLET authored
If 'wcd9335_setup_irqs()' fails, me must release the memory allocated in 'wcd_clsh_ctrl_alloc()', as already done in the remove function. Add an error handling path and the missing 'wcd_clsh_ctrl_free()' call. Fixes: 20aedafd ("ASoC: wcd9335: add support to wcd9335 codec") Signed-off-by:
-
Christophe JAILLET authored
There is no point in calling 'free_irq()' explicitly for 'WCD9335_IRQ_SLIMBUS' in the remove function. The irqs are requested in 'wcd9335_setup_irqs()' using a resource managed function (i.e. 'devm_request_threaded_irq()'). 'wcd9335_setup_irqs()' requests all what is defined in the 'wcd9335_irqs' structure. This structure has only one entry for 'WCD9335_IRQ_SLIMBUS'. So 'devm_request...irq()' + explicit 'free_irq()' would lead to a double free. Remove the unneeded 'free_irq()' from the remove function. Fixes: 20aedafd ("ASoC: wcd9335: add support to wcd9335 codec") Signed-off-by:
-
Mark Brown authored
These patches fixup or update for rockchip i2s. Changes in v3: - Drop property 'rockchip,playback-only', 'rockchip,capture-only'. Implement it by 'dma-names' of DT instead. Changes in v2: - split property trcm into single 'trcm-sync-tx-only' and 'trcm-sync-rx-only' suggested by Nicolas. - split property trcm into single 'trcm-sync-tx-only' and 'trcm-sync-rx-only' suggested by Nicolas. - drop change-id Sugar Zhang (12): ASoC: rockchip: i2s: Add support for set bclk ratio ASoC: rockchip: i2s: Fixup clk div error ASoC: rockchip: i2s: Improve dma data transfer efficiency ASoC: rockchip: i2s: Fix regmap_ops hang ASoC: rockchip: i2s: Fix concurrency between tx/rx ASoC: rockchip: i2s: Reset the controller if soft reset failed ASoC: dt-bindings: rockchip: Document reset property for i2s ASoC: rockchip: i2s: Make playback/capture optional ASoC: rockchip: i2s: Add compatible for more SoCs ASoC: dt-bindings: rockchip: Add compatible strings for more SoCs ASoC: rockchip: i2s: Add support for frame inversion ASoC: dt-bindings: rockchip: i2s: Document property TRCM Xiaotan Luo (1): ASoC: rockchip: i2s: Fixup config for DAIFMT_DSP_A/B Xing Zheng (1): ASoC: rockchip: i2s: Add support for TRCM property .../devicetree/bindings/sound/rockchip-i2s.yaml | 19 ++ sound/soc/rockchip/rockchip_i2s.c | 278 +++++++++++++++------ sound/soc/rockchip/rockchip_i2s.h | 10 +- 3 files changed, 224 insertions(+), 83 deletions(-) -- 2.7.4
-
Mark Brown authored
These patches fixup or update for rockchip spdif. Sugar Zhang (4): ASoC: rockchip: spdif: Mark SPDIF_SMPDR as volatile ASoC: rockchip: spdif: Fix some coding style ASoC: rockchip: spdif: Add support for rk3568 spdif ASoC: dt-bindings: rockchip: Add compatible for rk3568 spdif .../devicetree/bindings/sound/rockchip-spdif.yaml | 1 + sound/soc/rockchip/rockchip_spdif.c | 38 ++++++++++++---------- 2 files changed, 22 insertions(+), 17 deletions(-) -- 2.7.4
-
Sugar Zhang authored
This patch adds support for frame inversion. Signed-off-by:
-
Sugar Zhang authored
This patch adds compatible strings for more SoCs. Signed-off-by:
-
Sugar Zhang authored
This patch adds more compatible strings for SoCs. Signed-off-by:
-
Sugar Zhang authored
There are some controllers which support playback only or capture only. so, make it optional. and initial capability by 'dma-names' of DT. Signed-off-by:
-
Xiaotan Luo authored
- DSP_A: PCM delay 1 bit mode, L data MSB after FRM LRC - DSP_B: PCM no delay mode, L data MSB during FRM LRC Signed-off-by:
Xiaotan Luo <lxt@rock-chips.com> Signed-off-by:
-
