As diagnosed by Florian :

If TCA_FQ_QUANTUM is set to 0x80000000, fq_deueue()
can loop forever in :

if (f->credit <= 0) {
  f->credit += q->quantum;
  goto begin;
}

... because f->credit is either 0 or -2147483648.

Let's limit TCA_FQ_QUANTUM to no more than 1 << 20 :
This max value should limit risks of breaking user setups
while fixing this bug.

Fixes: afe4fd06 ("pkt_sched: fq: Fair Queue packet scheduler")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Diagnosed-by: Florian Westphal <fw@strlen.de>
Reported-by: syzbot+dc9071cc5a85950bdfce@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no module named tipc_diag.

The assignment to tipc_diag-y has no effect.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/tipc/Makefile adds socket.o twice.

tipc-y	+= addr.o bcast.o bearer.o \
           core.o link.o discover.o msg.o  \
           name_distr.o  subscr.o monitor.o name_table.o net.o  \
           netlink.o netlink_compat.o node.o socket.o eth_media.o \
                                             ^^^^^^^^
           topsrv.o socket.o group.o trace.o
                    ^^^^^^^^
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow all the RGMII modes to be used. This would allow us to represent
the hardware better in the device tree with RGMII_ID where in most
cases the PHY's internal delay for both RX and TX are used.

Fixes: 9f93ac8d ("net-next: stmmac: Add dwmac-sun8i")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow all the RGMII modes to be used. This would allow us to represent
the hardware better in the device tree with RGMII_ID where in most
cases the PHY's internal delay for both RX and TX are used.

Fixes: af0bd4e9 ("net: stmmac: sunxi platform extensions for GMAC in Allwinner A20 SoC's")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If skb_linearize() fails, we need to free the skb.

TSO makes skb bigger, and this bug might be the reason
Raspberry Pi 3B+ users had to disable TSO.

Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: RENARD Pierre-Francois <pfrenard@gmail.com>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When using fixed link we don't need the MDIO bus support.
Reported-by: Heiko Stuebner <heiko@sntech.de>
Reported-by: kernelci.org bot <bot@kernelci.org>
Fixes: d3e014ec ("net: stmmac: platform: Fix MDIO init for platforms without PHY")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Acked-by: Sriram Dash <Sriram.dash@samsung.com>
Tested-by: Patrice Chotard <patrice.chotard@st.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail> # Lamobo R1 (fixed-link + MDIO sub node for roboswitch).
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
vlan: rtnetlink newlink fixes

First patch fixes a potential memory leak found by syzbot

Second patch makes vlan_changelink() aware of errors
and report them to user.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Both vlan_dev_change_flags() and vlan_dev_set_egress_priority()
can return an error. vlan_changelink() should not ignore them.

Fixes: 07b5b17e ("[VLAN]: Use rtnl_link API")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are few cases where the ndo_uninit() handler might be not
called if an error happens while device is initialized.

Since vlan_newlink() calls vlan_changelink() before
trying to register the netdevice, we need to make sure
vlan_dev_uninit() has been called at least once,
or we might leak allocated memory.

BUG: memory leak
unreferenced object 0xffff888122a206c0 (size 32):
  comm "syz-executor511", pid 7124, jiffies 4294950399 (age 32.240s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 61 73 00 00 00 00 00 00 00 00  ......as........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000000eb3bb85>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
    [<000000000eb3bb85>] slab_post_alloc_hook mm/slab.h:586 [inline]
    [<000000000eb3bb85>] slab_alloc mm/slab.c:3320 [inline]
    [<000000000eb3bb85>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3549
    [<000000007b99f620>] kmalloc include/linux/slab.h:556 [inline]
    [<000000007b99f620>] vlan_dev_set_egress_priority+0xcc/0x150 net/8021q/vlan_dev.c:194
    [<000000007b0cb745>] vlan_changelink+0xd6/0x140 net/8021q/vlan_netlink.c:126
    [<0000000065aba83a>] vlan_newlink+0x135/0x200 net/8021q/vlan_netlink.c:181
    [<00000000fb5dd7a2>] __rtnl_newlink+0x89a/0xb80 net/core/rtnetlink.c:3305
    [<00000000ae4273a1>] rtnl_newlink+0x4e/0x80 net/core/rtnetlink.c:3363
    [<00000000decab39f>] rtnetlink_rcv_msg+0x178/0x4b0 net/core/rtnetlink.c:5424
    [<00000000accba4ee>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477
    [<00000000319fe20f>] rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442
    [<00000000d51938dc>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
    [<00000000d51938dc>] netlink_unicast+0x223/0x310 net/netlink/af_netlink.c:1328
    [<00000000e539ac79>] netlink_sendmsg+0x2c0/0x570 net/netlink/af_netlink.c:1917
    [<000000006250c27e>] sock_sendmsg_nosec net/socket.c:639 [inline]
    [<000000006250c27e>] sock_sendmsg+0x54/0x70 net/socket.c:659
    [<00000000e2a156d1>] ____sys_sendmsg+0x2d0/0x300 net/socket.c:2330
    [<000000008c87466e>] ___sys_sendmsg+0x8a/0xd0 net/socket.c:2384
    [<00000000110e3054>] __sys_sendmsg+0x80/0xf0 net/socket.c:2417
    [<00000000d71077c8>] __do_sys_sendmsg net/socket.c:2426 [inline]
    [<00000000d71077c8>] __se_sys_sendmsg net/socket.c:2424 [inline]
    [<00000000d71077c8>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2424

Fixe: 07b5b17e ("[VLAN]: Use rtnl_link API")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2020-01-07

The following pull-request contains BPF updates for your *net* tree.

We've added 2 non-merge commits during the last 1 day(s) which contain
a total of 2 files changed, 16 insertions(+), 4 deletions(-).

The main changes are:

1) Fix a use-after-free in cgroup BPF due to auto-detachment, from Roman Gushchin.

2) Fix skb out-of-bounds access in ld_abs/ind instruction, from Daniel Borkmann.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add one notifier for udev changes net device name.
Fixes: b6601323ef9e ("net: stmmac: debugfs entry name is not be changed when udev rename")
Signed-off-by: Jiping Ma <jiping.ma2@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2020-01-06

This series introduces some fixes to mlx5 driver.

Please pull and let me know if there is any problem.

For -stable v5.3
 ('net/mlx5: Move devlink registration before interfaces load')

For -stable v5.4
 ('net/mlx5e: Fix hairpin RSS table size')
 ('net/mlx5: DR, Init lists that are used in rule's member')
 ('net/mlx5e: Always print health reporter message to dmesg')
 ('net/mlx5: DR, No need for atomic refcount for internal SW steering resources')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Whenever adding new member of rule object we attach it to 2 lists,
These 2 lists should be initialized first.

Fixes: 41d07074 ("net/mlx5: DR, Expose steering rule functionality")
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Set hairpin table size to the corret size, based on the groups that
would be created in it. Groups are laid out on the table such that a
group occupies a range of entries in the table. This implies that the
group ranges should have correspondence to the table they are laid upon.

The patch cited below  made group 1's size to grow hence causing
overflow of group range laid on the table.

Fixes: a795d8db ("net/mlx5e: Support RSS for IP-in-IP and IPv6 tunneled packets")
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

No need for an atomic refcounter for the STE and hashtables.
These are internal SW steering resources and they are always
under domain mutex.

This also fixes the following refcount error:
  refcount_t: addition on 0; use-after-free.
  WARNING: CPU: 9 PID: 3527 at lib/refcount.c:25 refcount_warn_saturate+0x81/0xe0
  Call Trace:
   dr_table_init_nic+0x10d/0x110 [mlx5_core]
   mlx5dr_table_create+0xb4/0x230 [mlx5_core]
   mlx5_cmd_dr_create_flow_table+0x39/0x120 [mlx5_core]
   __mlx5_create_flow_table+0x221/0x5f0 [mlx5_core]
   esw_create_offloads_fdb_tables+0x180/0x5a0 [mlx5_core]
   ...

Fixes: 26d688e3 ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

This reverts commit 7dee607e.

During cleanup path, FTE's parent node group is removed which is
referenced by the FTE while freeing the FTE.
Hence FTE's lockless read lookup optimization done in cited commit is
not possible at the moment.

Hence, revert the commit.

This avoid below KAZAN call trace.

[  110.390896] BUG: KASAN: use-after-free in find_root.isra.14+0x56/0x60
[mlx5_core]
[  110.391048] Read of size 4 at addr ffff888c19e6d220 by task
swapper/12/0

[  110.391219] CPU: 12 PID: 0 Comm: swapper/12 Not tainted 5.5.0-rc1+
[  110.391222] Hardware name: HP ProLiant DL380p Gen8, BIOS P70
08/02/2014
[  110.391225] Call Trace:
[  110.391229]  <IRQ>
[  110.391246]  dump_stack+0x95/0xd5
[  110.391307]  ? find_root.isra.14+0x56/0x60 [mlx5_core]
[  110.391320]  print_address_description.constprop.5+0x20/0x320
[  110.391379]  ? find_root.isra.14+0x56/0x60 [mlx5_core]
[  110.391435]  ? find_root.isra.14+0x56/0x60 [mlx5_core]
[  110.391441]  __kasan_report+0x149/0x18c
[  110.391499]  ? find_root.isra.14+0x56/0x60 [mlx5_core]
[  110.391504]  kasan_report+0x12/0x20
[  110.391511]  __asan_report_load4_noabort+0x14/0x20
[  110.391567]  find_root.isra.14+0x56/0x60 [mlx5_core]
[  110.391625]  del_sw_fte_rcu+0x4a/0x100 [mlx5_core]
[  110.391633]  rcu_core+0x404/0x1950
[  110.391640]  ? rcu_accelerate_cbs_unlocked+0x100/0x100
[  110.391649]  ? run_rebalance_domains+0x201/0x280
[  110.391654]  rcu_core_si+0xe/0x10
[  110.391661]  __do_softirq+0x181/0x66c
[  110.391670]  irq_exit+0x12c/0x150
[  110.391675]  smp_apic_timer_interrupt+0xf0/0x370
[  110.391681]  apic_timer_interrupt+0xf/0x20
[  110.391684]  </IRQ>
[  110.391695] RIP: 0010:cpuidle_enter_state+0xfa/0xba0
[  110.391703] Code: 3d c3 9b b5 50 e8 56 75 6e fe 48 89 45 c8 0f 1f 44
00 00 31 ff e8 a6 94 6e fe 45 84 ff 0f 85 f6 02 00 00 fb 66 0f 1f 44 00
00 <45> 85 f6 0f 88 db 06 00 00 4d 63 fe 4b 8d 04 7f 49 8d 04 87 49 8d
[  110.391706] RSP: 0018:ffff888c23a6fce8 EFLAGS: 00000246 ORIG_RAX:
ffffffffffffff13
[  110.391712] RAX: dffffc0000000000 RBX: ffffe8ffff7002f8 RCX:
000000000000001f
[  110.391715] RDX: 1ffff11184ee6cb5 RSI: 0000000040277d83 RDI:
ffff888c277365a8
[  110.391718] RBP: ffff888c23a6fd40 R08: 0000000000000002 R09:
0000000000035280
[  110.391721] R10: ffff888c23a6fc80 R11: ffffed11847485d0 R12:
ffffffffb1017740
[  110.391723] R13: 0000000000000003 R14: 0000000000000003 R15:
0000000000000000
[  110.391732]  ? cpuidle_enter_state+0xea/0xba0
[  110.391738]  cpuidle_enter+0x4f/0xa0
[  110.391747]  call_cpuidle+0x6d/0xc0
[  110.391752]  do_idle+0x360/0x430
[  110.391758]  ? arch_cpu_idle_exit+0x40/0x40
[  110.391765]  ? complete+0x67/0x80
[  110.391771]  cpu_startup_entry+0x1d/0x20
[  110.391779]  start_secondary+0x2f3/0x3c0
[  110.391784]  ? set_cpu_sibling_map+0x2500/0x2500
[  110.391795]  secondary_startup_64+0xa4/0xb0

[  110.391841] Allocated by task 290:
[  110.391917]  save_stack+0x21/0x90
[  110.391921]  __kasan_kmalloc.constprop.8+0xa7/0xd0
[  110.391925]  kasan_kmalloc+0x9/0x10
[  110.391929]  kmem_cache_alloc_trace+0xf6/0x270
[  110.391987]  create_root_ns.isra.36+0x58/0x260 [mlx5_core]
[  110.392044]  mlx5_init_fs+0x5fd/0x1ee0 [mlx5_core]
[  110.392092]  mlx5_load_one+0xc7a/0x3860 [mlx5_core]
[  110.392139]  init_one+0x6ff/0xf90 [mlx5_core]
[  110.392145]  local_pci_probe+0xde/0x190
[  110.392150]  work_for_cpu_fn+0x56/0xa0
[  110.392153]  process_one_work+0x678/0x1140
[  110.392157]  worker_thread+0x573/0xba0
[  110.392162]  kthread+0x341/0x400
[  110.392166]  ret_from_fork+0x1f/0x40

[  110.392218] Freed by task 2742:
[  110.392288]  save_stack+0x21/0x90
[  110.392292]  __kasan_slab_free+0x137/0x190
[  110.392296]  kasan_slab_free+0xe/0x10
[  110.392299]  kfree+0x94/0x250
[  110.392357]  tree_put_node+0x257/0x360 [mlx5_core]
[  110.392413]  tree_remove_node+0x63/0xb0 [mlx5_core]
[  110.392469]  clean_tree+0x199/0x240 [mlx5_core]
[  110.392525]  mlx5_cleanup_fs+0x76/0x580 [mlx5_core]
[  110.392572]  mlx5_unload+0x22/0xc0 [mlx5_core]
[  110.392619]  mlx5_unload_one+0x99/0x260 [mlx5_core]
[  110.392666]  remove_one+0x61/0x160 [mlx5_core]
[  110.392671]  pci_device_remove+0x10b/0x2c0
[  110.392677]  device_release_driver_internal+0x1e4/0x490
[  110.392681]  device_driver_detach+0x36/0x40
[  110.392685]  unbind_store+0x147/0x200
[  110.392688]  drv_attr_store+0x6f/0xb0
[  110.392693]  sysfs_kf_write+0x127/0x1d0
[  110.392697]  kernfs_fop_write+0x296/0x420
[  110.392702]  __vfs_write+0x66/0x110
[  110.392707]  vfs_write+0x1a0/0x500
[  110.392711]  ksys_write+0x164/0x250
[  110.392715]  __x64_sys_write+0x73/0xb0
[  110.392720]  do_syscall_64+0x9f/0x3a0
[  110.392725]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 7dee607e ("net/mlx5: Support lockless FTE read lookups")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Register devlink before interfaces are added.
This will allow interfaces to use devlink while initalizing. For example,
call mlx5_is_roce_enabled.

Fixes: aba25279 ("net/mlx5e: Add TX reporter support")
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

In case a reporter exists, error message is logged only to the devlink
tracer. The devlink tracer is a visibility utility only, which user can
choose not to monitor.
After cited patch, 3rd party monitoring tools that tracks these error
message will no longer find them in dmesg, causing a regression.

With this patch, error messages are also logged into the dmesg.

Fixes: c50de4af ("net/mlx5e: Generalize tx reporter's functionality")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Following scenario easily break driver logic and crash the kernel:
1. Add rule with mirred actions to same device.
2. Delete this rule.
In described scenario rule is not added to database and on deletion
driver access invalid entry.
Example:

 $ tc filter add dev ens1f0_0 ingress protocol ip prio 1 \
       flower skip_sw \
       action mirred egress mirror dev ens1f0_1 pipe \
       action mirred egress redirect dev ens1f0_1
 $ tc filter del dev ens1f0_0 ingress protocol ip prio 1

Dmesg output:

[  376.634396] mlx5_core 0000:82:00.0: mlx5_cmd_check:756:(pid 3439): DESTROY_FLOW_GROUP(0x934) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x563e2f)
[  376.654983] mlx5_core 0000:82:00.0: del_hw_flow_group:567:(pid 3439): flow steering can't destroy fg 89 of ft 3145728
[  376.673433] kasan: CONFIG_KASAN_INLINE enabled
[  376.683769] kasan: GPF could be caused by NULL-ptr deref or user memory access
[  376.695229] general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI
[  376.705069] CPU: 7 PID: 3439 Comm: tc Not tainted 5.4.0-rc5+ #76
[  376.714959] Hardware name: Supermicro SYS-2028TP-DECTR/X10DRT-PT, BIOS 2.0a 08/12/2016
[  376.726371] RIP: 0010:mlx5_del_flow_rules+0x105/0x960 [mlx5_core]
[  376.735817] Code: 01 00 00 00 48 83 eb 08 e8 28 d9 ff ff 4c 39 e3 75 d8 4c 8d bd c0 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 84 04 00 00 48 8d 7d 28 8b 9 d
[  376.761261] RSP: 0018:ffff888847c56db8 EFLAGS: 00010202
[  376.770054] RAX: dffffc0000000000 RBX: ffff8888582a6da0 RCX: ffff888847c56d60
[  376.780743] RDX: 0000000000000058 RSI: 0000000000000008 RDI: 0000000000000282
[  376.791328] RBP: 0000000000000000 R08: fffffbfff0c60ea6 R09: fffffbfff0c60ea6
[  376.802050] R10: fffffbfff0c60ea5 R11: ffffffff8630752f R12: ffff8888582a6da0
[  376.812798] R13: dffffc0000000000 R14: ffff8888582a6da0 R15: 00000000000002c0
[  376.823445] FS:  00007f675f9a8840(0000) GS:ffff88886d200000(0000) knlGS:0000000000000000
[  376.834971] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  376.844179] CR2: 00000000007d9640 CR3: 00000007d3f26003 CR4: 00000000001606e0
[  376.854843] Call Trace:
[  376.868542]  __mlx5_eswitch_del_rule+0x49/0x300 [mlx5_core]
[  376.877735]  mlx5e_tc_del_fdb_flow+0x6ec/0x9e0 [mlx5_core]
[  376.921549]  mlx5e_flow_put+0x2b/0x50 [mlx5_core]
[  376.929813]  mlx5e_delete_flower+0x5b6/0xbd0 [mlx5_core]
[  376.973030]  tc_setup_cb_reoffload+0x29/0xc0
[  376.980619]  fl_reoffload+0x50a/0x770 [cls_flower]
[  377.015087]  tcf_block_playback_offloads+0xbd/0x250
[  377.033400]  tcf_block_setup+0x1b2/0xc60
[  377.057247]  tcf_block_offload_cmd+0x195/0x240
[  377.098826]  tcf_block_offload_unbind+0xe7/0x180
[  377.107056]  __tcf_block_put+0xe5/0x400
[  377.114528]  ingress_destroy+0x3d/0x60 [sch_ingress]
[  377.122894]  qdisc_destroy+0xf1/0x5a0
[  377.129993]  qdisc_graft+0xa3d/0xe50
[  377.151227]  tc_get_qdisc+0x48e/0xa20
[  377.165167]  rtnetlink_rcv_msg+0x35d/0x8d0
[  377.199528]  netlink_rcv_skb+0x11e/0x340
[  377.219638]  netlink_unicast+0x408/0x5b0
[  377.239913]  netlink_sendmsg+0x71b/0xb30
[  377.267505]  sock_sendmsg+0xb1/0xf0
[  377.273801]  ___sys_sendmsg+0x635/0x900
[  377.312784]  __sys_sendmsg+0xd3/0x170
[  377.338693]  do_syscall_64+0x95/0x460
[  377.344833]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  377.352321] RIP: 0033:0x7f675e58e090

To avoid this, for every mirred action check if output device was
already processed. If so - drop rule with EOPNOTSUPP error.
Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Anatoly has been fuzzing with kBdysch harness and reported a KASAN
slab oob in one of the outcomes:

  [...]
  [   77.359642] BUG: KASAN: slab-out-of-bounds in bpf_skb_load_helper_8_no_cache+0x71/0x130
  [   77.360463] Read of size 4 at addr ffff8880679bac68 by task bpf/406
  [   77.361119]
  [   77.361289] CPU: 2 PID: 406 Comm: bpf Not tainted 5.5.0-rc2-xfstests-00157-g2187f215 #1
  [   77.362134] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
  [   77.362984] Call Trace:
  [   77.363249]  dump_stack+0x97/0xe0
  [   77.363603]  print_address_description.constprop.0+0x1d/0x220
  [   77.364251]  ? bpf_skb_load_helper_8_no_cache+0x71/0x130
  [   77.365030]  ? bpf_skb_load_helper_8_no_cache+0x71/0x130
  [   77.365860]  __kasan_report.cold+0x37/0x7b
  [   77.366365]  ? bpf_skb_load_helper_8_no_cache+0x71/0x130
  [   77.366940]  kasan_report+0xe/0x20
  [   77.367295]  bpf_skb_load_helper_8_no_cache+0x71/0x130
  [   77.367821]  ? bpf_skb_load_helper_8+0xf0/0xf0
  [   77.368278]  ? mark_lock+0xa3/0x9b0
  [   77.368641]  ? kvm_sched_clock_read+0x14/0x30
  [   77.369096]  ? sched_clock+0x5/0x10
  [   77.369460]  ? sched_clock_cpu+0x18/0x110
  [   77.369876]  ? bpf_skb_load_helper_8+0xf0/0xf0
  [   77.370330]  ___bpf_prog_run+0x16c0/0x28f0
  [   77.370755]  __bpf_prog_run32+0x83/0xc0
  [   77.371153]  ? __bpf_prog_run64+0xc0/0xc0
  [   77.371568]  ? match_held_lock+0x1b/0x230
  [   77.371984]  ? rcu_read_lock_held+0xa1/0xb0
  [   77.372416]  ? rcu_is_watching+0x34/0x50
  [   77.372826]  sk_filter_trim_cap+0x17c/0x4d0
  [   77.373259]  ? sock_kzfree_s+0x40/0x40
  [   77.373648]  ? __get_filter+0x150/0x150
  [   77.374059]  ? skb_copy_datagram_from_iter+0x80/0x280
  [   77.374581]  ? do_raw_spin_unlock+0xa5/0x140
  [   77.375025]  unix_dgram_sendmsg+0x33a/0xa70
  [   77.375459]  ? do_raw_spin_lock+0x1d0/0x1d0
  [   77.375893]  ? unix_peer_get+0xa0/0xa0
  [   77.376287]  ? __fget_light+0xa4/0xf0
  [   77.376670]  __sys_sendto+0x265/0x280
  [   77.377056]  ? __ia32_sys_getpeername+0x50/0x50
  [   77.377523]  ? lock_downgrade+0x350/0x350
  [   77.377940]  ? __sys_setsockopt+0x2a6/0x2c0
  [   77.378374]  ? sock_read_iter+0x240/0x240
  [   77.378789]  ? __sys_socketpair+0x22a/0x300
  [   77.379221]  ? __ia32_sys_socket+0x50/0x50
  [   77.379649]  ? mark_held_locks+0x1d/0x90
  [   77.380059]  ? trace_hardirqs_on_thunk+0x1a/0x1c
  [   77.380536]  __x64_sys_sendto+0x74/0x90
  [   77.380938]  do_syscall_64+0x68/0x2a0
  [   77.381324]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  [   77.381878] RIP: 0033:0x44c070
  [...]

After further debugging, turns out while in case of other helper functions
we disallow passing modified ctx, the special case of ld/abs/ind instruction
which has similar semantics (except r6 being the ctx argument) is missing
such check. Modified ctx is impossible here as bpf_skb_load_helper_8_no_cache()
and others are expecting skb fields in original position, hence, add
check_ctx_reg() to reject any modified ctx. Issue was first introduced back
in f1174f77 ("bpf/verifier: rework value tracking").

Fixes: f1174f77 ("bpf/verifier: rework value tracking")
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200106215157.3553-1-daniel@iogearbox.net

Igor Russkikh says:

====================
Aquantia/Marvell atlantic bugfixes 2020/01

Here is a set of recently discovered bugfixes,
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Function entries were duplicated accidentally, removing the dups.

Fixes: ea4b4d7f ("net: atlantic: loopback tests via private flags")
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Initial loopback configuration should be called earlier, before
starting traffic on HW blocks. Otherwise depending on race conditions
it could be kept disabled.

Fixes: ea4b4d7f ("net: atlantic: loopback tests via private flags")
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Last code/checkpatch cleanup did a copy paste error where code from
firmware 3 API logic was moved to firmware 1 logic.

This resulted in FW1.x users would never see the link state as active.

Fixes: 7b0c342f ("net: atlantic: code style cleanup")
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Before commit 4bfc0bb2 ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself")
cgroup bpf structures were released with
corresponding cgroup structures. It guaranteed the hierarchical order
of destruction: children were always first. It preserved attached
programs from being released before their propagated copies.

But with cgroup auto-detachment there are no such guarantees anymore:
cgroup bpf is released as soon as the cgroup is offline and there are
no live associated sockets. It means that an attached program can be
detached and released, while its propagated copy is still living
in the cgroup subtree. This will obviously lead to an use-after-free
bug.

To reproduce the issue the following script can be used:

  #!/bin/bash

  CGROOT=/sys/fs/cgroup

  mkdir -p ${CGROOT}/A ${CGROOT}/B ${CGROOT}/A/C
  sleep 1

  ./test_cgrp2_attach ${CGROOT}/A egress &
  A_PID=$!
  ./test_cgrp2_attach ${CGROOT}/B egress &
  B_PID=$!

  echo $$ > ${CGROOT}/A/C/cgroup.procs
  iperf -s &
  S_PID=$!
  iperf -c localhost -t 100 &
  C_PID=$!

  sleep 1

  echo $$ > ${CGROOT}/B/cgroup.procs
  echo ${S_PID} > ${CGROOT}/B/cgroup.procs
  echo ${C_PID} > ${CGROOT}/B/cgroup.procs

  sleep 1

  rmdir ${CGROOT}/A/C
  rmdir ${CGROOT}/A

  sleep 1

  kill -9 ${S_PID} ${C_PID} ${A_PID} ${B_PID}

On the unpatched kernel the following stacktrace can be obtained:

[   33.619799] BUG: unable to handle page fault for address: ffffbdb4801ab002
[   33.620677] #PF: supervisor read access in kernel mode
[   33.621293] #PF: error_code(0x0000) - not-present page
[   33.622754] Oops: 0000 [#1] SMP NOPTI
[   33.623202] CPU: 0 PID: 601 Comm: iperf Not tainted 5.5.0-rc2+ #23
[   33.625545] RIP: 0010:__cgroup_bpf_run_filter_skb+0x29f/0x3d0
[   33.635809] Call Trace:
[   33.636118]  ? __cgroup_bpf_run_filter_skb+0x2bf/0x3d0
[   33.636728]  ? __switch_to_asm+0x40/0x70
[   33.637196]  ip_finish_output+0x68/0xa0
[   33.637654]  ip_output+0x76/0xf0
[   33.638046]  ? __ip_finish_output+0x1c0/0x1c0
[   33.638576]  __ip_queue_xmit+0x157/0x410
[   33.639049]  __tcp_transmit_skb+0x535/0xaf0
[   33.639557]  tcp_write_xmit+0x378/0x1190
[   33.640049]  ? _copy_from_iter_full+0x8d/0x260
[   33.640592]  tcp_sendmsg_locked+0x2a2/0xdc0
[   33.641098]  ? sock_has_perm+0x10/0xa0
[   33.641574]  tcp_sendmsg+0x28/0x40
[   33.641985]  sock_sendmsg+0x57/0x60
[   33.642411]  sock_write_iter+0x97/0x100
[   33.642876]  new_sync_write+0x1b6/0x1d0
[   33.643339]  vfs_write+0xb6/0x1a0
[   33.643752]  ksys_write+0xa7/0xe0
[   33.644156]  do_syscall_64+0x5b/0x1b0
[   33.644605]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix this by grabbing a reference to the bpf structure of each ancestor
on the initialization of the cgroup bpf structure, and dropping the
reference at the end of releasing the cgroup bpf structure.

This will restore the hierarchical order of cgroup bpf releasing,
without adding any operations on hot paths.

Thanks to Josef Bacik for the debugging and the initial analysis of
the problem.

Fixes: 4bfc0bb2 ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself")
Reported-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Fix calling multiple tee_client_close_context in case of shm allocation
fails.

Fixes: 24688095 (“firmware: broadcom: add OP-TEE based BNXT f/w manager”)
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 6390 family uses an extended register to set the port connected to
the CPU. The lower 5 bits indicate the port, the upper three bits are
the priority of the frames as they pass through the switch, what
egress queue they should use, etc. Since frames being set to the CPU
are typically management frames, BPDU, IGMP, ARP, etc set the priority
to 7, the reset default, and the highest.

Fixes: 33641994 ("net: dsa: mv88e6xxx: Monitor and Management tables")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix up inconsistent usage of upper and lowercase letters in "Samsung"
name.

"SAMSUNG" is not an abbreviation but a regular trademarked name.
Therefore it should be written with lowercase letters starting with
capital letter.

Although advertisement materials usually use uppercase "SAMSUNG", the
lowercase version is used in all legal aspects (e.g. on Wikipedia and in
privacy/legal statements on
https://www.samsung.com/semiconductor/privacy-global/).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since net_device.mem_start is unsigned long, it should not be cast to
int right before casting to pointer.  This fixes warning (compile
testing on alpha architecture):

    drivers/net/wan/sdla.c: In function ‘sdla_transmit’:
    drivers/net/wan/sdla.c:711:13: warning:
        cast to pointer from integer of different size [-Wint-to-pointer-cast]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to fix a memleak caused by no place to free cmd->obj.chunk
for the unprocessed SCTP_CMD_REPLY. This issue occurs when failing to
process a cmd while there're still SCTP_CMD_REPLY cmds on the cmd seq
with an allocated chunk in cmd->obj.chunk.

So fix it by freeing cmd->obj.chunk for each SCTP_CMD_REPLY cmd left on
the cmd seq when any cmd returns error. While at it, also remove 'nomem'
label.

Reported-by: syzbot+107c4aff5f392bf1517f@syzkaller.appspotmail.com
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot found the following crash on:
=====================================================
BUG: KMSAN: uninit-value in __nlmsg_parse include/net/netlink.h:661 [inline]
BUG: KMSAN: uninit-value in nlmsg_parse_deprecated
include/net/netlink.h:706 [inline]
BUG: KMSAN: uninit-value in __tipc_nl_compat_dumpit+0x553/0x11e0
net/tipc/netlink_compat.c:215
CPU: 0 PID: 12425 Comm: syz-executor062 Not tainted 5.5.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0x1c9/0x220 lib/dump_stack.c:118
  kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108
  __msan_warning+0x57/0xa0 mm/kmsan/kmsan_instr.c:245
  __nlmsg_parse include/net/netlink.h:661 [inline]
  nlmsg_parse_deprecated include/net/netlink.h:706 [inline]
  __tipc_nl_compat_dumpit+0x553/0x11e0 net/tipc/netlink_compat.c:215
  tipc_nl_compat_dumpit+0x761/0x910 net/tipc/netlink_compat.c:308
  tipc_nl_compat_handle net/tipc/netlink_compat.c:1252 [inline]
  tipc_nl_compat_recv+0x12e9/0x2870 net/tipc/netlink_compat.c:1311
  genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline]
  genl_family_rcv_msg net/netlink/genetlink.c:717 [inline]
  genl_rcv_msg+0x1dd0/0x23a0 net/netlink/genetlink.c:734
  netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477
  genl_rcv+0x63/0x80 net/netlink/genetlink.c:745
  netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
  netlink_unicast+0xfa0/0x1100 net/netlink/af_netlink.c:1328
  netlink_sendmsg+0x11f0/0x1480 net/netlink/af_netlink.c:1917
  sock_sendmsg_nosec net/socket.c:639 [inline]
  sock_sendmsg net/socket.c:659 [inline]
  ____sys_sendmsg+0x1362/0x13f0 net/socket.c:2330
  ___sys_sendmsg net/socket.c:2384 [inline]
  __sys_sendmsg+0x4f0/0x5e0 net/socket.c:2417
  __do_sys_sendmsg net/socket.c:2426 [inline]
  __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424
  __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424
  do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:295
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x444179
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 1b d8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffd2d6409c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004002e0 RCX: 0000000000444179
RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000003
RBP: 00000000006ce018 R08: 0000000000000000 R09: 00000000004002e0
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401e20
R13: 0000000000401eb0 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:
  kmsan_save_stack_with_flags mm/kmsan/kmsan.c:149 [inline]
  kmsan_internal_poison_shadow+0x5c/0x110 mm/kmsan/kmsan.c:132
  kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:86
  slab_alloc_node mm/slub.c:2774 [inline]
  __kmalloc_node_track_caller+0xe47/0x11f0 mm/slub.c:4382
  __kmalloc_reserve net/core/skbuff.c:141 [inline]
  __alloc_skb+0x309/0xa50 net/core/skbuff.c:209
  alloc_skb include/linux/skbuff.h:1049 [inline]
  nlmsg_new include/net/netlink.h:888 [inline]
  tipc_nl_compat_dumpit+0x6e4/0x910 net/tipc/netlink_compat.c:301
  tipc_nl_compat_handle net/tipc/netlink_compat.c:1252 [inline]
  tipc_nl_compat_recv+0x12e9/0x2870 net/tipc/netlink_compat.c:1311
  genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline]
  genl_family_rcv_msg net/netlink/genetlink.c:717 [inline]
  genl_rcv_msg+0x1dd0/0x23a0 net/netlink/genetlink.c:734
  netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477
  genl_rcv+0x63/0x80 net/netlink/genetlink.c:745
  netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
  netlink_unicast+0xfa0/0x1100 net/netlink/af_netlink.c:1328
  netlink_sendmsg+0x11f0/0x1480 net/netlink/af_netlink.c:1917
  sock_sendmsg_nosec net/socket.c:639 [inline]
  sock_sendmsg net/socket.c:659 [inline]
  ____sys_sendmsg+0x1362/0x13f0 net/socket.c:2330
  ___sys_sendmsg net/socket.c:2384 [inline]
  __sys_sendmsg+0x4f0/0x5e0 net/socket.c:2417
  __do_sys_sendmsg net/socket.c:2426 [inline]
  __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424
  __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424
  do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:295
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
=====================================================

The complaint above occurred because the memory region pointed by attrbuf
variable was not initialized. To eliminate this warning, we use kcalloc()
rather than kmalloc_array() to allocate memory for attrbuf.

Reported-by: syzbot+b1fd2bf2c89d8407e15f@syzkaller.appspotmail.com
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The only clk init function in this driver that register a clk is
fu540_c000_clk_init(), and thus we need to unregister the clk when this
driver is removed on that platform. Other init functions, for example
macb_clk_init(), don't register clks and therefore we shouldn't
unregister the clks when this driver is removed. Convert this
registration path to devm so it gets auto-unregistered when this driver
is removed and drop the clk_unregister() calls in driver remove (and
error paths) so that we don't erroneously remove a clk from the system
that isn't registered by this driver.

Otherwise we get strange crashes with a use-after-free when the
devm_clk_get() call in macb_clk_init() calls clk_put() on a clk pointer
that has become invalid because it is freed in clk_unregister().

Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Yash Shah <yash.shah@sifive.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: c218ad55 ("macb: Add support for SiFive FU540-C000")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The emails to ks.giri@samsung.com and vipul.pandya@samsung.com bounce
with 550 error code:

    host mailin.samsung.com[203.254.224.12] said: 550
    5.1.1 Recipient address rejected: User unknown (in reply to RCPT TO
    command)"

Drop Girish K S and Vipul Pandya from sxgbe maintainers entry.

Cc: Byungho An <bh74.an@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The len used for skb_put_padto is wrong, it need to add len of hdr.

In qrtr_node_enqueue, local variable size_t len is assign with
skb->len, then skb_push(skb, sizeof(*hdr)) will add skb->len with
sizeof(*hdr), so local variable size_t len is not same with skb->len
after skb_push(skb, sizeof(*hdr)).

Then the purpose of skb_put_padto(skb, ALIGN(len, 4)) is to add add
pad to the end of the skb's data if skb->len is not aligned to 4, but
unfortunately it use len instead of skb->len, at this line, skb->len
is 32 bytes(sizeof(*hdr)) more than len, for example, len is 3 bytes,
then skb->len is 35 bytes(3 + 32), and ALIGN(len, 4) is 4 bytes, so
__skb_put_padto will do nothing after check size(35) < len(4), the
correct value should be 36(sizeof(*hdr) + ALIGN(len, 4) = 32 + 4),
then __skb_put_padto will pass check size(35) < len(36) and add 1 byte
to the end of skb's data, then logic is correct.

function of skb_push:
void *skb_push(struct sk_buff *skb, unsigned int len)
{
	skb->data -= len;
	skb->len  += len;
	if (unlikely(skb->data < skb->head))
		skb_under_panic(skb, len, __builtin_return_address(0));
	return skb->data;
}

function of skb_put_padto
static inline int skb_put_padto(struct sk_buff *skb, unsigned int len)
{
	return __skb_put_padto(skb, len, true);
}

function of __skb_put_padto
static inline int __skb_put_padto(struct sk_buff *skb, unsigned int len,
				  bool free_on_error)
{
	unsigned int size = skb->len;

	if (unlikely(size < len)) {
		len -= size;
		if (__skb_pad(skb, len, free_on_error))
			return -ENOMEM;
		__skb_put(skb, len);
	}
	return 0;
}
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Atomic operations that span cache lines are super-expensive on x86
(not just to the current processor, but also to other processes as all
memory operations are blocked until the operation completes). Upcoming
x86 processors have a switch to cause such operations to generate a #AC
trap. It is expected that some real time systems will enable this mode
in BIOS.

In preparation for this, it is necessary to fix code that may execute
atomic instructions with operands that cross cachelines because the #AC
trap will crash the kernel.

Since "pwol_mask" is local and never exposed to concurrency, there is
no need to set bits in pwol_mask using atomic operations.

Directly operate on the byte which contains the bit instead of using
__set_bit() to avoid any big endian concern due to type cast to
unsigned long in __set_bit().
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current code use dma_wmb() to ensure Rx/Tx descriptors are visible
to device before writing to doorbell.

However, these dma_wmb() are wrong and unnecessary. Therefore,
they should be removed.

iowrite32be() called from gve_rx_write_doorbell()/gve_tx_put_doorbell()
should guaratee that all previous writes to WB/UC memory is visible to
device before the write done by iowrite32be().

E.g. On ARM64, iowrite32be() calls __iowmb() which expands to dma_wmb()
and only then calls __raw_writel().
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The kernel test robot reports a boot failure with qemu in 5.5-rc,
referencing commit 2203cbf2 ("net: sfp: move fwnode parsing into
sfp-bus layer"). This is caused by phylink_create() being passed a
NULL fwnode, causing fwnode_property_get_reference_args() to return
-EINVAL.

Don't attempt to attach to a SFP bus if we have no fwnode, which
avoids this issue.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Fixes: 2203cbf2 ("net: sfp: move fwnode parsing into sfp-bus layer")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

DaveM's git tree have been moved into a named subdir 'netdev' to deal with
allowing Jakub Kicinski to help co-maintain the trees.

Link: https://www.kernel.org/doc/html/latest/networking/netdev-FAQ.htmlSigned-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The loopback feature is only supported on a few drivers like broadcom,
mellanox, etc. The default veth driver has not supported it yet. To avoid
returning failed and making the runner feel confused, let's just skip
the test on drivers that not support loopback.

Fixes: ad113409 ("selftests: Add loopback test")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>