- 11 Oct, 2015 6 commits
-
-
Hannes Frederic Sowa authored
GRE point-to-point interfaces should also support ipv6 multicast. Setting up default multicast routes on interface creation was forgotten. Add it. Bugzilla: <https://bugzilla.kernel.org/show_bug.cgi?id=103231> Cc: Julien Muchembled <jm@jmuchemb.eu> Cc: Eric Dumazet <edumazet@google.com> Cc: Nicolas Dumazet <ndumazet@google.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
Configuring 4-tuple RSS hsahing for UDP [E.g., by using `ethtool -N <interface> rx-flow-hash udp4 sdfn'] on a 57710/57711 adapter would cause it to assert as HW does not support such a configuration. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: couple of fixes Just a couple of small fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
When calculating the shift needed in order to access a bit array element in a byte, we should multiply the index by the element size and not assume it is fixed at 2-bits. Fixes: 93c1edb2 ("mlxsw: Introduce Mellanox switch driver core") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Elad Raz authored
Fixes: 31557f0f ("mlxsw: Introduce Mellanox SwitchX-2 ASIC support") Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
WANG Cong authored
Similar to commit c0afd9ce ("fq_codel: fix return value of fq_codel_drop()") ->drop() is supposed to return the number of bytes it dropped, but hhf_drop () returns the id of the bucket where it drops a packet from. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Terry Lam <vtlam@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 09 Oct, 2015 5 commits
-
-
David S. Miller authored
Or Gerlitz says: ==================== Mellanox driver update to 4.3-rc4 Small set of fixes for net, which includes Carol's patches, a fix from Achiad to have the right behaviour for mlx5 Eth devices w.r.t VLANs in promiscuous mode, a good-bye patch from Ido who left Mellanox and the 1st patch from Jiri to our NIC drivers (I love one-liners)... ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Shamay authored
Remove Ido Shamay as co-maintainer for the mlx4 Ethernet driver, as he no longer works for Mellanox. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Achiad Shochat authored
When the device was set to promiscuous mode, we didn't disable VLAN filtering, which is wrong behaviour, fix that. Now when the device is set to promiscuous mode RX packets sent over any VLAN (or no VLAN tag at all) will be accepted. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
We used the wrong register name for querying the PVLC register Fixes: a124d13e ('net/mlx5_core: Add more query port helpers') Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Carol L Soto authored
Test interrupts fails if not all completion vectors called request_irq. This case happens if only mlx4_en is loaded and we have more completion vectors than rx rings. Fixes: c66fa19c ('net/mlx4: Add EQ pool') Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Acked-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 08 Oct, 2015 6 commits
-
-
Carol L Soto authored
If we get MAX_MSIX interrupts would like to have each receive ring with his own msix interrupt line. Do not need the shared_ports variable at mlx4_enable_msix Fixes: 9293267a ('net/mlx4_core: Capping number of requested MSIXs to MAX_MSIX') Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Acked-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jean Delvare authored
"Y" was the right answer for MDIO_OCTEON when this option was only available on CAVIUM_OCTEON_SOC. But now that the option is visible on all (64-bit) systems, this piece of advice no longer makes sense. This helper module is selected automatically by drivers which need it anyway. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: a6d67864 ("net: mdio-octeon: Modify driver to work on both ThunderX and Octeon") Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sunil Goutham <sgoutham@cavium.com> Cc: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Cc: David Daney <david.daney@cavium.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
The recently added mlxsw driver produces warnings in ARM allmodconfig: drivers/net/ethernet/mellanox/mlxsw/pci.c: In function 'mlxsw_pci_cmd_exec': drivers/net/ethernet/mellanox/mlxsw/pci.c:1585:59: warning: right shift count >= width of type [-Wshift-count-overflow] linux/byteorder/big_endian.h:38:51: note: in definition of macro '__cpu_to_be32' drivers/net/ethernet/mellanox/mlxsw/pci.c:76:2: note: in expansion of macro 'iowrite32be' This uses upper_32_bits() to extract the bits while avoiding that warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jiri Pirko <jiri@mellanox.com> Fixes: eda6500a "mlxsw: Add PCI bus implementation" Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexei Starovoitov authored
Similar to commit c29390c6 ("xps: must clear sender_cpu before forwarding") the skb->sender_cpu needs to be cleared before xmit. Fixes: 3896d655 ("bpf: introduce bpf_clone_redirect() helper") Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
WANG Cong authored
Similar to commit c29390c6 ("xps: must clear sender_cpu before forwarding") the skb->sender_cpu needs to be cleared when moving from Rx Tx, otherwise kernel could crash. Fixes: 2bd82484 ("xps: fix xps for stacked devices") Cc: Eric Dumazet <edumazet@google.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Moore authored
Make unix_sk() just like inet[6]_sk() by constify'ing the sock parameter. Signed-off-by: Paul Moore <pmoore@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 07 Oct, 2015 15 commits
-
-
David S. Miller authored
Joe Stringer says: ==================== OVS conntrack fixes for net The userspace side of the Open vSwitch conntrack changes is currently undergoing review, which has highlighted some minor bugs in the existing conntrack implementation in the kernel, as well as pointing out some future-proofing that can be done on the interface to reduce the need for additional compatibility code in future. The biggest changes here are to the userspace API for the ct_state match field and the CT action. This series proposes to firstly extend the ct_state match field to 32 bits, ensuring to reject any currently unsupported bits. Secondly, rather than representing CT action flags within a 32-bit field, simply use a netlink attribute as presence of the single flag that is defined today. This also serves to reject unsupported ct action flag bits. v4: Use 12-character abbreviated hashes in commit messages. v3: Fully acked. v2: Address minor style feedback, add acks. v1: Initial post. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Stringer authored
Previously, the CT_ATTR_FLAGS attribute, when nested under the OVS_ACTION_ATTR_CT, encoded a 32-bit bitmask of flags that modify the semantics of the ct action. It's more extensible to just represent each flag as a nested attribute, and this requires no additional error checking to reject flags that aren't currently supported. Suggested-by: Ben Pfaff <blp@nicira.com> Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Stringer authored
The ct_state field was initially added as an 8-bit field, however six of the bits are already being used and use cases are already starting to appear that may push the limits of this field. This patch extends the field to 32 bits while retaining the internal representation of 8 bits. This should cover forward compatibility of the ABI for the foreseeable future. This patch also reorders the OVS_CS_F_* bits to be sequential. Suggested-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Stringer authored
Previously, if userspace specified ct_state bits in the flow key which are currently undefined (and therefore unsupported), then they would be ignored. This could cause unexpected behaviour in future if userspace is extended to support additional bits but attempts to communicate with the current version of the kernel. This patch rectifies the situation by rejecting such ct_state bits. Fixes: 7f8a436e "openvswitch: Add conntrack action" Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Stringer authored
The ct action uses parts of the flow key, so we need to ensure that it is valid before executing that action. Fixes: 7f8a436e "openvswitch: Add conntrack action" Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Stringer authored
If ovs_fragment() was unable to fragment the skb due to an L2 header that exceeds the supported length, skbs would be leaked. Fix the bug. Fixes: 7f8a436e "openvswitch: Add conntrack action" Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Stringer authored
These comments hadn't caught up to their implementations, fix them. Fixes: 7f8a436e "openvswitch: Add conntrack action" Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Neil Armstrong says: ==================== net: dsa: complete and fix the dsa unbinding In order to cleanly unbind the dsa core, either as a module removal, or a platform device unbind, switch the allocation the their devm_ counterparts and complete the destroy functions. First, the missing kfree were added, the remove function were completed then kfree were removed in favor to devm_ calls. The last patch is an way to cleanly exit the probe when no switch is found in the discover process. The patches are based on the current net. v3: - make checkpatch happy with 1/5 & 5/5 - fix 5/5 exit path with a goto ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neil Armstrong authored
If no switch were found in dsa_setup_dst, return -ENODEV and exit the dsa_probe cleanly. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neil Armstrong authored
Now the kfree calls exists in the the remove functions, remove them in all places except the of_probe functions and replace allocation calls with their devm_ counterparts. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neil Armstrong authored
When unbinding dsa, complete the dsa_switch_destroy to unregister the fixed link phy then cleanly unregister and destroy the net devices. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neil Armstrong authored
To prevent memory leakage on unbinding, add missing mdiobus unregister and unallocation calls. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neil Armstrong authored
To prevent memory leakage on unbinding, add missing kfree calls. Includes minor cosmetic change to make patch clean. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
It occurred to me yesterday that 741a11d9 ("net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set") means that xfrm6_dst_lookup needs the FLOWI_FLAG_SKIP_NH_OIF flag set. This latest commit causes the oif to be considered in lookups which is known to break vti. This explains why 58189ca7 did not the IPv6 change at the time it was submitted. Fixes: 42a7b32b ("xfrm: Add oif to dst lookups") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mitch Williams authored
The standard way to check if the AQ is enabled is to look at the count field. So we should only set this field after we have successfully allocated memory. To do otherwise is to incite panic among the populace. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 06 Oct, 2015 1 commit
-
-
Tom Lendacky authored
The kasprintf function can return NULL if the allocation fails. Check for successful allocation before attempting to use the returned buffer. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 05 Oct, 2015 7 commits
-
-
Pravin B Shelar authored
Not every device has dev->tstats set. So when OVS tries to calculate vport stats it causes kernel panic. Following patch fixes it by using standard API to get net-device stats. ---8<--- Unable to handle kernel paging request at virtual address 766b4008 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: vport_vxlan vxlan ip6_udp_tunnel udp_tunnel tun bridge stp llc openvswitch ipv6 CPU: 7 PID: 1108 Comm: ovs-vswitchd Not tainted 4.3.0-rc3+ #82 PC is at ovs_vport_get_stats+0x150/0x1f8 [openvswitch] <snip> Call trace: [<ffffffbffc0859f8>] ovs_vport_get_stats+0x150/0x1f8 [openvswitch] [<ffffffbffc07cdb0>] ovs_vport_cmd_fill_info+0x140/0x1e0 [openvswitch] [<ffffffbffc07cf0c>] ovs_vport_cmd_dump+0xbc/0x138 [openvswitch] [<ffffffc00045a5ac>] netlink_dump+0xb8/0x258 [<ffffffc00045ace0>] __netlink_dump_start+0x120/0x178 [<ffffffc00045dd9c>] genl_family_rcv_msg+0x2d4/0x308 [<ffffffc00045de58>] genl_rcv_msg+0x88/0xc4 [<ffffffc00045cf24>] netlink_rcv_skb+0xd4/0x100 [<ffffffc00045dab0>] genl_rcv+0x30/0x48 [<ffffffc00045c830>] netlink_unicast+0x154/0x200 [<ffffffc00045cc9c>] netlink_sendmsg+0x308/0x364 [<ffffffc00041e10c>] sock_sendmsg+0x14/0x2c [<ffffffc000420d58>] SyS_sendto+0xbc/0xf0 Code: aa1603e1 f94037a4 aa1303e2 aa1703e0 (f9400465) Reported-by: Tomasz Sawicki <tomasz.sawicki@objectiveintegration.uk> Fixes: 8c876639 ("openvswitch: Remove vport stats.") Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Schichan authored
Without this patch, if the only instructions using r_X are of the BPF_LD | BPF_IND type, r_X would not be reset to 0, using whatever value was there when entering the jited code. With this patch, r_X will be correctly marked as used so it will be reset to 0 in the prologue code. This fix also makes the test "LD_IND byte default X" pass in the test_bpf module when the ARM JIT is enabled. Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Konstantin Khlebnikov authored
When openvswitch tries allocate memory from offline numa node 0: stats = kmem_cache_alloc_node(flow_stats_cache, GFP_KERNEL | __GFP_ZERO, 0) It catches VM_BUG_ON(nid < 0 || nid >= MAX_NUMNODES || !node_online(nid)) [ replaced with VM_WARN_ON(!node_online(nid)) recently ] in linux/gfp.h This patch disables numa affinity in this case. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
When sockets have a native eBPF program attached through setsockopt(sk, SOL_SOCKET, SO_ATTACH_BPF, ...), and then try to dump these over getsockopt(sk, SOL_SOCKET, SO_GET_FILTER, ...), the following panic appears: [49904.178642] BUG: unable to handle kernel NULL pointer dereference at (null) [49904.178762] IP: [<ffffffff81610fd9>] sk_get_filter+0x39/0x90 [49904.182000] PGD 86fc9067 PUD 531a1067 PMD 0 [49904.185196] Oops: 0000 [#1] SMP [...] [49904.224677] Call Trace: [49904.226090] [<ffffffff815e3d49>] sock_getsockopt+0x319/0x740 [49904.227535] [<ffffffff812f59e3>] ? sock_has_perm+0x63/0x70 [49904.228953] [<ffffffff815e2fc8>] ? release_sock+0x108/0x150 [49904.230380] [<ffffffff812f5a43>] ? selinux_socket_getsockopt+0x23/0x30 [49904.231788] [<ffffffff815dff36>] SyS_getsockopt+0xa6/0xc0 [49904.233267] [<ffffffff8171b9ae>] entry_SYSCALL_64_fastpath+0x12/0x71 The underlying issue is the very same as in commit b382c086 ("sock, diag: fix panic in sock_diag_put_filterinfo"), that is, native eBPF programs don't store an original program since this is only needed in cBPF ones. However, sk_get_filter() wasn't updated to test for this at the time when eBPF could be attached. Just throw an error to the user to indicate that eBPF cannot be dumped over this interface. That way, it can also be known that a program _is_ attached (as opposed to just return 0), and a different (future) method needs to be consulted for a dump. Fixes: 89aa0758 ("net: sock: allow eBPF programs to be attached to sockets") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Stringer authored
Conntrack LABELS (plural) are exposed by conntrack; rename the OVS name for these to be consistent with conntrack. Fixes: c2ac6673 "openvswitch: Allow matching on conntrack label" Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrey Vagin authored
Now send with MSG_PEEK can return data from multiple SKBs. Unfortunately we take into account the peek offset for each skb, that is wrong. We need to apply the peek offset only once. In addition, the peek offset should be used only if MSG_PEEK is set. Cc: "David S. Miller" <davem@davemloft.net> (maintainer:NETWORKING Cc: Eric Dumazet <edumazet@google.com> (commit_signer:1/14=7%) Cc: Aaron Conole <aconole@bytheb.org> Fixes: 9f389e35 ("af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag") Signed-off-by: Andrey Vagin <avagin@openvz.org> Tested-by: Aaron Conole <aconole@bytheb.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
WANG Cong authored
Align with other tc actions. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-