Drop the doubled word "in" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes all the sparse and W=1 compiler warnings in the
driver.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

i.MX6 SL, SLL, ULL, ULZ SoCs have an RNGB block.

Since imx-rngc driver supports also rngb,
let's enable it for these SoCs too.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

RNGB block is found in some i.MX6 SoCs - 6SL, 6SLL, 6ULL, 6ULZ.
Add corresponding compatible strings.

Note:

Several NXP SoC from QorIQ family (P1010, P1023, P4080, P3041, P5020)
also have a RNGB, however it's part of the CAAM
(Cryptograhic Accelerator and Assurance Module) crypto accelerator.
In this case, RNGB is managed in the caam driver
(drivers/crypto/caam/), since it's tightly related to
the caam "job ring" interface, not to mention CAAM internally relying on
RNGB as source of randomness.

On the other hand, the i.MX6 SoCs with RNGB have a DCP
(Data Co-Processor) crypto accelerator and this block and RNGB
are independent.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Only its reorder field is actually used now, so remove the struct and
embed @reorder directly in parallel_data.

No functional change, just a cleanup.
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

There's no reason to have two interfaces when there's only one caller.
Removing _possible saves text and simplifies future changes.
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

A padata instance has effective cpumasks that store the user-supplied
masks ANDed with the online mask, but this middleman is unnecessary.
parallel_data keeps the same information around.  Removing this saves
text and code churn in future changes.
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

pd_setup_cpumasks() has only one caller.  Move its contents inline to
prepare for the next cleanup.
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

padata_stop() has two callers and is unnecessary in both cases.  When
pcrypt calls it before padata_free(), it's being unloaded so there are
no outstanding padata jobs[0].  When __padata_free() calls it, it's
either along the same path or else pcrypt initialization failed, which
of course means there are also no outstanding jobs.

Removing it simplifies padata and saves text.

[0] https://lore.kernel.org/linux-crypto/20191119225017.mjrak2fwa5vccazl@gondor.apana.org.au/Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

padata_start() is only used right after pcrypt allocates an instance
with all possible CPUs, when PADATA_INVALID can't happen, so there's no
need for a separate "start" step.  It can be done during allocation to
save text, make using padata easier, and avoid unneeded calls in the
future.
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

clang static analysis flags this error

qat_uclo.c:297:3: warning: Attempt to free released memory
  [unix.Malloc]
                kfree(*init_tab_base);
                ^~~~~~~~~~~~~~~~~~~~~

When input *init_tab_base is null, the function allocates memory for
the head of the list.  When there is problem allocating other list
elements the list is unwound and freed.  Then a check is made if the
list head was allocated and is also freed.

Keeping track of the what may need to be freed is the variable 'tail_old'.
The unwinding/freeing block is

	while (tail_old) {
		mem_init = tail_old->next;
		kfree(tail_old);
		tail_old = mem_init;
	}

The problem is that the first element of tail_old is also what was
allocated for the list head

		init_header = kzalloc(sizeof(*init_header), GFP_KERNEL);
		...
		*init_tab_base = init_header;
		flag = 1;
	}
	tail_old = init_header;

So *init_tab_base/init_header are freed twice.

There is another problem.
When the input *init_tab_base is non null the tail_old is calculated by
traveling down the list to first non null entry.

	tail_old = init_header;
	while (tail_old->next)
		tail_old = tail_old->next;

When the unwinding free happens, the last entry of the input list will
be freed.

So the freeing needs a general changed.
If locally allocated the first element of tail_old is freed, else it
is skipped.  As a bit of cleanup, reset *init_tab_base if it came in
as null.

Fixes: b4b7e67c ("crypto: qat - Intel(R) QAT ucode part of fw loader")
Cc: <stable@vger.kernel.org>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The child devices for sa2ul (like the RNG) have hard dependency towards
the parent, they can't function without the parent enabled. Add device
link for this purpose so that the dependencies are taken care of properly.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for sa2ul hardware AEAD for hmac(sha256),cbc(aes) and
hmac(sha1),cbc(aes) algorithms.
Signed-off-by: Keerthy <j-keerthy@ti.com>
[t-kristo@ti.com: number of bug fixes, major refactoring and cleanup of
 code]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for sha1/sha256/sha512 sa2ul based hardware authentication.
With the hash update mechanism, we always use software fallback
mechanism for now, as there is no way to fetch the partial hash state
from the HW accelerator. HW accelerator is only used when digest is
called for a data chunk of known size.
Signed-off-by: Keerthy <j-keerthy@ti.com>
[t-kristo@ti.com: various bug fixes, major cleanups and refactoring of code]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Adds a basic crypto driver and currently supports AES/3DES
in cbc mode for both encryption and decryption.
Signed-off-by: Keerthy <j-keerthy@ti.com>
[t-kristo@ti.com: major re-work to fix various bugs in the driver and to
 cleanup the code]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The Security Accelerator Ultra Lite (SA2UL) subsystem provides hardware
cryptographic acceleration for the following use cases:

* Encryption and authentication for secure boot
* Encryption and authentication of content in applications
  requiring DRM (digital rights management) and
  content/asset protection

SA2UL provides support for number of different cryptographic algorithms
including SHA1, SHA256, SHA512, AES, 3DES, and various combinations of
the previous for AEAD use.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Keerthy <j-keerthy@ti.com>
[t-kristo@ti.com: converted documentation to yaml]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The clang integrated assembler complains about movzxw:

arch/x86/crypto/crc32c-pcl-intel-asm_64.S:173:2: error: invalid instruction mnemonic 'movzxw'

It seems that movzwq is the mnemonic that it expects instead,
and this is what objdump prints when disassembling the file.

Fixes: 6a8ce1ef ("crypto: crc32c - Optimize CRC32C calculation with PCLMULQDQ instruction")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

At the top this file, we have:
   #define pr_fmt(fmt) "chcr:" fmt

So there is no need to repeat "chcr : " in some error message when the
pr_xxx macro is used.
This would lead to log "chcr:chcr : blabla"
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The error handling path of 'chcr_authenc_setkey()' is the same as this
error handling code.

So just 'goto out' as done everywhere in the function to simplify the code.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Overly-generic names can cause problems like naming collisions,
confusing crash reports, and reduced grep-ability.  E.g. see
commit d099ea6e ("crypto - Avoid free() namespace collision").

Clean this up for the lrw template by prefixing the names with "lrw_".

(I didn't use "crypto_lrw_" instead because that seems overkill.)

Also constify the tfm context in a couple places.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Overly-generic names can cause problems like naming collisions,
confusing crash reports, and reduced grep-ability.  E.g. see
commit d099ea6e ("crypto - Avoid free() namespace collision").

Clean this up for the xts template by prefixing the names with "xts_".

(I didn't use "crypto_xts_" instead because that seems overkill.)

Also constify the tfm context in a couple places, and make
xts_free_instance() use the instance context structure so that it
doesn't just assume the crypto_skcipher_spawn is at the beginning.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

for Hi1620 hardware, we should disable these hardware flr:
1. BME_FLR - bit 7,
2. PM_FLR - bit 11,
3. SRIOV_FLR - bit 12,
Or HPRE may goto D3 state, when we bind and unbind HPRE quickly,
as it does FLR triggered by BME/PM/SRIOV.

Fixes: c8b4b477("crypto: hisilicon - add HiSilicon HPRE accelerator")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Update debugfs interface parameters, and adjust the
processing logic inside the corresponding function.

Fixes: 84897415("crypto: hisilicon - Add debugfs for HPRE")
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If CONFIG_PCI_IOV is not enabled, we can not use "sriov_configure".

Fixes: 5ec302a3("crypto: hisilicon - add SRIOV support for HPRE")
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

1. Bit 1 to bit 5 are NFE, not CE.
2. Macro 'HPRE_VF_NUM' is defined in 'qm.h', so delete it here.
3. Delete multiple blank lines.
4. Adjust format alignment.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Registers in "hpre_dfx_files" can only be cleaned to zero but
HPRE_OVERTIME_THRHLD, which can be written as any number.

Fixes: 64a6301e("crypto: hisilicon/hpre - add debugfs for ...")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Initialize current queue number as HPRE_PF_DEF_Q_NUM, or it is zero
and we can't set its value by "current_q_write".
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Set the flag CRYPTO_ALG_ALLOCATES_MEMORY in the crypto drivers that
allocate memory.

drivers/crypto/allwinner/sun8i-ce/sun8i-ce-core.c: sun8i_ce_cipher
drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c: sun8i_ss_cipher
drivers/crypto/amlogic/amlogic-gxl-core.c: meson_cipher
drivers/crypto/axis/artpec6_crypto.c: artpec6_crypto_common_init
drivers/crypto/bcm/cipher.c: spu_skcipher_rx_sg_create
drivers/crypto/caam/caamalg.c: aead_edesc_alloc
drivers/crypto/caam/caamalg_qi.c: aead_edesc_alloc
drivers/crypto/caam/caamalg_qi2.c: aead_edesc_alloc
drivers/crypto/caam/caamhash.c: hash_digest_key
drivers/crypto/cavium/cpt/cptvf_algs.c: process_request
drivers/crypto/cavium/nitrox/nitrox_aead.c: nitrox_process_se_request
drivers/crypto/cavium/nitrox/nitrox_skcipher.c: nitrox_process_se_request
drivers/crypto/ccp/ccp-crypto-aes-cmac.c: ccp_do_cmac_update
drivers/crypto/ccp/ccp-crypto-aes-galois.c: ccp_crypto_enqueue_request
drivers/crypto/ccp/ccp-crypto-aes-xts.c: ccp_crypto_enqueue_request
drivers/crypto/ccp/ccp-crypto-aes.c: ccp_crypto_enqueue_request
drivers/crypto/ccp/ccp-crypto-des3.c: ccp_crypto_enqueue_request
drivers/crypto/ccp/ccp-crypto-sha.c: ccp_crypto_enqueue_request
drivers/crypto/chelsio/chcr_algo.c: create_cipher_wr
drivers/crypto/hisilicon/sec/sec_algs.c: sec_alloc_and_fill_hw_sgl
drivers/crypto/hisilicon/sec2/sec_crypto.c: sec_alloc_req_id
drivers/crypto/inside-secure/safexcel_cipher.c: safexcel_queue_req
drivers/crypto/inside-secure/safexcel_hash.c: safexcel_ahash_enqueue
drivers/crypto/ixp4xx_crypto.c: ablk_perform
drivers/crypto/marvell/cesa/cipher.c: mv_cesa_skcipher_dma_req_init
drivers/crypto/marvell/cesa/hash.c: mv_cesa_ahash_dma_req_init
drivers/crypto/marvell/octeontx/otx_cptvf_algs.c: create_ctx_hdr
drivers/crypto/n2_core.c: n2_compute_chunks
drivers/crypto/picoxcell_crypto.c: spacc_sg_to_ddt
drivers/crypto/qat/qat_common/qat_algs.c: qat_alg_skcipher_encrypt
drivers/crypto/qce/skcipher.c: qce_skcipher_async_req_handle
drivers/crypto/talitos.c : talitos_edesc_alloc
drivers/crypto/virtio/virtio_crypto_algs.c: __virtio_crypto_skcipher_do_req
drivers/crypto/xilinx/zynqmp-aes-gcm.c: zynqmp_aes_aead_cipher
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
[EB: avoid overly-long lines]
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Introduce a new algorithm flag CRYPTO_ALG_ALLOCATES_MEMORY.  If this
flag is set, then the driver allocates memory in its request routine.
Such drivers are not suitable for disk encryption because GFP_ATOMIC
allocation can fail anytime (causing random I/O errors) and GFP_KERNEL
allocation can recurse into the block layer, causing a deadlock.

For now, this flag is only implemented for some algorithm types.  We
also assume some usage constraints for it to be meaningful, since there
are lots of edge cases the crypto API allows (e.g., misaligned or
fragmented scatterlists) that mean that nearly any crypto algorithm can
allocate memory in some case.  See the comment for details.

Also add this flag to CRYPTO_ALG_INHERITED_FLAGS so that when a template
is instantiated, this flag is set on the template instance if it is set
on any algorithm the instance uses.

Based on a patch by Mikulas Patocka <mpatocka@redhat.com>
(https://lore.kernel.org/r/alpine.LRH.2.02.2006301414580.30526@file01.intranet.prod.int.rdu2.redhat.com).
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

CRYPTO_ALG_NEED_FALLBACK is handled inconsistently.  When it's requested
to be clear, some templates propagate that request to child algorithms,
while others don't.

It's apparently desired for NEED_FALLBACK to be propagated, to avoid
deadlocks where a module tries to load itself while it's being
initialized, and to avoid unnecessarily complex fallback chains where we
have e.g. cbc-aes-$driver falling back to cbc(aes-$driver) where
aes-$driver itself falls back to aes-generic, instead of cbc-aes-$driver
simply falling back to cbc(aes-generic).  There have been a number of
fixes to this effect:

commit 89027579 ("crypto: xts - Propagate NEED_FALLBACK bit")
commit d2c2a85c ("crypto: ctr - Propagate NEED_FALLBACK bit")
commit e6c2e65c ("crypto: cbc - Propagate NEED_FALLBACK bit")

But it seems that other templates can have the same problems too.

To avoid this whack-a-mole, just add NEED_FALLBACK to INHERITED_FLAGS so
that it's always inherited.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The flag CRYPTO_ALG_ASYNC is "inherited" in the sense that when a
template is instantiated, the template will have CRYPTO_ALG_ASYNC set if
any of the algorithms it uses has CRYPTO_ALG_ASYNC set.

We'd like to add a second flag (CRYPTO_ALG_ALLOCATES_MEMORY) that gets
"inherited" in the same way.  This is difficult because the handling of
CRYPTO_ALG_ASYNC is hardcoded everywhere.  Address this by:

  - Add CRYPTO_ALG_INHERITED_FLAGS, which contains the set of flags that
    have these inheritance semantics.

  - Add crypto_algt_inherited_mask(), for use by template ->create()
    methods.  It returns any of these flags that the user asked to be
    unset and thus must be passed in the 'mask' to crypto_grab_*().

  - Also modify crypto_check_attr_type() to handle computing the 'mask'
    so that most templates can just use this.

  - Make crypto_grab_*() propagate these flags to the template instance
    being created so that templates don't have to do this themselves.

Make crypto/simd.c propagate these flags too, since it "wraps" another
algorithm, similar to a template.

Based on a patch by Mikulas Patocka <mpatocka@redhat.com>
(https://lore.kernel.org/r/alpine.LRH.2.02.2006301414580.30526@file01.intranet.prod.int.rdu2.redhat.com).
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

seqiv_create() is pointless because it just checks that the template is
being instantiated as an AEAD, then calls seqiv_aead_create().  But
seqiv_aead_create() does the exact same check, via aead_geniv_alloc().

Just remove seqiv_create() and use seqiv_aead_create() directly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The type and mask arguments to aead_geniv_alloc() are always 0, so
remove them.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Current minimum required version of binutils is 2.23,
which supports PSHUFB, PCLMULQDQ, PEXTRD, AESKEYGENASSIST,
AESIMC, AESENC, AESENCLAST, AESDEC, AESDECLAST and MOVQ
instruction mnemonics.

Substitute macros from include/asm/inst.h with a proper
instruction mnemonics in various assmbly files from
x86/crypto directory, and remove now unneeded file.

The patch was tested by calculating and comparing sha256sum
hashes of stripped object files before and after the patch,
to be sure that executable code didn't change.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: "David S. Miller" <davem@davemloft.net>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: Borislav Petkov <bp@alien8.de>
CC: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch kills an strncpy by using strscpy instead.  The name
would be silently truncated if it is too long.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: John Allen <john.allen@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Now that there's a function that calculates the SHA-256 digest of a
buffer in one step, use it instead of sha256_init() + sha256_update() +
sha256_final().

Also simplify the code by inlining calculate_sha256() into its caller
and switching a debug log statement to use %*phN instead of bin2hex().
Acked-by: Tzung-Bi Shih <tzungbi@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Cc: alsa-devel@alsa-project.org
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Now that there's a function that calculates the SHA-256 digest of a
buffer in one step, use it instead of sha256_init() + sha256_update() +
sha256_final().
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Cc: mptcp@lists.01.org
Cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
Cc: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Now that there's a function that calculates the SHA-256 digest of a
buffer in one step, use it instead of sha256_init() + sha256_update() +
sha256_final().
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Cc: linux-efi@vger.kernel.org
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add a function sha256() which computes a SHA-256 digest in one step,
combining sha256_init() + sha256_update() + sha256_final().

This is similar to how we also have blake2s().
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>