If the journal dev is different from fsdev, issue a cache flush before
committing fast commit blocks to disk.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201106035911.1942128-20-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Fast commits don't work with data journalling. This patch disables the
fast commit support when data journalling is turned on.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201106035911.1942128-19-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

In case of fast commits, determine if the inode is dirty by checking
if the inode is on fast commit list. This also helps us get rid of
ext4_inode_info.i_fc_committed_subtid field.
Reported-by: Andrea Righi <andrea.righi@canonical.com>
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-18-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Remove unnecessary calls to ext4_fc_start_update() and
ext4_fc_stop_update() from ext4_file_mmap().
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-17-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Mark the fast commit buffer as dirty before submission.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-16-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Add a TODO to remember fixing REQ_FUA | REQ_PREFLUSH for fast commit
buffers. Also, fix a typo in top level comment in fast_commit.c
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-15-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

This patch removes the deduplicates the code that implements waiting
on inode that's being committed. That code is moved into a new
function.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-14-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Take journal state lock before reading journal->j_commit_sequence.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-13-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Fast commit buffers should be filled in before toucing their
state. Remove code that sets buffer state as dirty before the buffer
is passed to the file system.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-12-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Fast commit performance can be optimized if commit thread doesn't wait
for ongoing fast commits to complete until the transaction enters
T_FLUSH state. Document this optimization.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-11-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

In jbd2_fc_end_commit_fallback(), we know which tid to commit. There's
no need for caller to pass it.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-10-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Variables journal->j_fc_off, journal->j_fc_wbuf are accessed during
commit path. Since today we allow only one process to perform a fast
commit, there is no need take state lock before accessing these
variables. This patch removes these locks and adds comments to
describe this.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-9-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Now that jbd2_fc_init is dropped, drop its docs too.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-8-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

This patch removes jbd2_fc_init() API and its related functions to
simplify enabling fast commits. With this change, the number of fast
commit blocks to use is solely determined by the JBD2 layer. So, we
move the default value for minimum number of fast commit blocks from
ext4/fast_commit.h to include/linux/jbd2.h. However, whether or not to
use fast commits is determined by the file system. The file system
just sets the fast commit feature using
jbd2_journal_set_features(). JBD2 layer then determines how many
blocks to use for fast commits (based on the value found in the JBD2
superblock).

Note that the JBD2 feature flag of fast commits is just an indication
that there are fast commit blocks present on disk. It doesn't tell
JBD2 layer about the intent of the file system of whether to it wants
to use fast commit or not. That's why, we blindly clear the fast
commit flag in journal_reset() after the recovery is done.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-7-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

The on-disk superblock field sb->s_maxlen represents the total size of
the journal including the fast commit area and is no more the max
number of blocks available for a transaction. The maximum number of
blocks available to a transaction is reduced by the number of fast
commit blocks. So, this patch renames j_maxlen to j_total_len to
better represent its intent. Also, it adds a function to calculate max
number of bufs available for a transaction.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-6-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Firstly, pass handle to all ext4_fc_track_* functions and use
transaction id found in handle->h_transaction->h_tid for tracking fast
commit updates. Secondly, don't pass inode to
ext4_fc_track_link/create/unlink functions. inode can be found inside
these functions as d_inode(dentry). However, rename path is an
exeception. That's because in that case, we need inode that's not same
as d_inode(dentry). To handle that, add a couple of low-level wrapper
functions that take inode and dentry as arguments.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-5-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

ext4_fc_track_range() should only be called when blocks are added or
removed from an inode. So, the only places from where we need to call
this function are ext4_map_blocks(), punch hole, collapse / zero
range, truncate. Remove all the other redundant calls to ths function.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-4-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

If inode gets evicted due to memory pressure, we have to remove it
from the fast commit list. However, that inode may have uncommitted
changes that fast commits will lose. So, just fall back to full
commits in this case. Also, rename the fast commit ineligiblity reason
from "EXT4_FC_REASON_MEM" to "EXT4_FC_REASON_MEM_NOMEM" for better
expression.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-3-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Fast commit feature has flags in the file system as well in JBD2. The
meaning of fast commit feature flags can get confusing. Update docs
and code to add more documentation about it.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201106035911.1942128-2-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

It takes xattr_sem to check inline data again but without unlock it
in case not have. So unlock it before return.

Fixes: aef1c851 ("ext4: let ext4_truncate handle inline data correctly")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/1604370542-124630-1-git-send-email-joseph.qi@linux.alibaba.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

Smatch complains that "i" can be uninitialized if we don't enter the
loop.  I don't know if it's possible but we may as well silence this
warning.

[ Initialize i to sb->s_blocksize instead of 0.  The only way the for
  loop could be skipped entirely is the in-memory data structures, in
  particular the bh->b_data for the on-disk superblock has gotten
  corrupted enough that calculated value of group is >= to
  ext4_get_groups_count(sb).  In that case, we want to exit
  immediately without allocating a block.  -- TYT ]

Fixes: 8016e29f ("ext4: fast commit recovery path")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201030114620.GB3251003@mwandaSigned-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

include/trace/events/ext4.h belongs to ext4 module, add the file path into
ext4 entry in MAINTAINERS.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20201030022435.1136-1-yuchao0@huawei.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

The macro MOPT_Q is used to indicates the mount option is related to
quota stuff and is defined to be MOPT_NOSUPPORT when CONFIG_QUOTA is
disabled.  Normally the quota options are handled explicitly, so it
didn't matter that the MOPT_STRING flag was missing, even though the
usrjquota and grpjquota mount options take a string argument.  It's
important that's present in the !CONFIG_QUOTA case, since without
MOPT_STRING, the mount option matcher will match usrjquota= followed
by an integer, and will otherwise skip the table entry, and so "mount
option not supported" error message is never reported.

[ Fixed up the commit description to better explain why the fix
  works. --TYT ]

Fixes: 26092bf5 ("ext4: use a table-driven handler for mount options")
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Link: https://lore.kernel.org/r/1603986396-28917-1-git-send-email-kaixuxia@tencent.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

Pull x86 fixes from Thomas Gleixner:
 "Three fixes all related to #DB:

   - Handle the BTF bit correctly so it doesn't get lost due to a kernel
     #DB

   - Only clear and set the virtual DR6 value used by ptrace on user
     space triggered #DB. A kernel #DB must leave it alone to ensure
     data consistency for ptrace.

   - Make the bitmasking of the virtual DR6 storage correct so it does
     not lose DR_STEP"

* tag 'x86-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/debug: Fix DR_STEP vs ptrace_get_debugreg(6)
  x86/debug: Only clear/set ->virtual_dr6 for userspace #DB
  x86/debug: Fix BTF handling

Pull timer fixes from Thomas Gleixner:
 "A few fixes for timers/timekeeping:

   - Prevent undefined behaviour in the timespec64_to_ns() conversion
     which is used for converting user supplied time input to
     nanoseconds. It lacked overflow protection.

   - Mark sched_clock_read_begin/retry() to prevent recursion in the
     tracer

   - Remove unused debug functions in the hrtimer and timerlist code"

* tag 'timers-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Prevent undefined behaviour in timespec64_to_ns()
  timers: Remove unused inline funtion debug_timer_free()
  hrtimer: Remove unused inline function debug_hrtimer_free()
  time/sched_clock: Mark sched_clock_read_begin/retry() as notrace

Pull smp fix from Thomas Gleixner:
 "A single fix for stop machine.

  Mark functions no trace to prevent a crash caused by recursion when
  enabling or disabling a tracer on RISC-V (probably all architectures
  which patch through stop machine)"

* tag 'smp-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  stop_machine, rcu: Mark functions as notrace

Pull locking fixes from Thomas Gleixner:
 "A couple of locking fixes:

   - Fix incorrect failure injection handling in the fuxtex code

   - Prevent a preemption warning in lockdep when tracking
     local_irq_enable() and interrupts are already enabled

   - Remove more raw_cpu_read() usage from lockdep which causes state
     corruption on !X86 architectures.

   - Make the nr_unused_locks accounting in lockdep correct again"

* tag 'locking-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lockdep: Fix nr_unused_locks accounting
  locking/lockdep: Remove more raw_cpu_read() usage
  futex: Fix incorrect should_fail_futex() handling
  lockdep: Fix preemption WARN for spurious IRQ-enable

Pull char/misc fixes/removals from Greg KH:
 "Here's some small fixes for 5.10-rc2 and a big driver removal.

  The fixes are for some reported issues in the interconnect and
  coresight drivers, nothing major.

  The "big" driver removal is the MIC drivers have been asked to be
  removed as the hardware never shipped and Intel no longer wants to
  maintain something that no one can use. This is welcomed by many as
  the DMA usage of these drivers was "interesting" and the security
  people were starting to question some issues that were starting to be
  found in the codebase.

  Note, one of the subsystems for this driver, the "VOP" code, will
  probably come back in future kernel versions as it was looking to
  potentially solve some PCIe virtualization issues that a number of
  other vendors were wanting to solve. But as-is, this codebase didn't
  work for anyone else so no actual functionality is being removed.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  coresight: cti: Initialize dynamic sysfs attributes
  coresight: Fix uninitialised pointer bug in etm_setup_aux()
  coresight: add module license
  misc: mic: remove the MIC drivers
  interconnect: qcom: use icc_sync state for sm8[12]50
  interconnect: qcom: Ensure that the floor bandwidth value is enforced
  interconnect: qcom: sc7180: Init BCMs before creating the nodes
  interconnect: qcom: sdm845: Init BCMs before creating the nodes
  interconnect: Aggregate before setting initial bandwidth
  interconnect: qcom: sdm845: Enable keepalive for the MM1 BCM

Merge tag 'driver-core-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core and documentation fixes from Greg KH:
 "Here is one tiny debugfs change to fix up an API where the last user
  was successfully fixed up in 5.10-rc1 (so it couldn't be merged
  earlier), and a much larger Documentation/ABI/ update to the files so
  they can be automatically parsed by our tools.

  The Documentation/ABI/ updates are just formatting issues, small ones
  to bring the files into parsable format, and have been acked by
  numerous subsystem maintainers and the documentation maintainer. I
  figured it was good to get this into 5.10-rc2 to help wih the merge
  issues that would arise if these were to stick in linux-next until
  5.11-rc1.

  The debugfs change has been in linux-next for a long time, and the
  Documentation updates only for the last linux-next release"

* tag 'driver-core-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (40 commits)
  scripts: get_abi.pl: assume ReST format by default
  docs: ABI: sysfs-class-led-trigger-pattern: remove hw_pattern duplication
  docs: ABI: sysfs-class-backlight: unify ABI documentation
  docs: ABI: sysfs-c2port: remove a duplicated entry
  docs: ABI: sysfs-class-power: unify duplicated properties
  docs: ABI: unify /sys/class/leds/<led>/brightness documentation
  docs: ABI: stable: remove a duplicated documentation
  docs: ABI: change read/write attributes
  docs: ABI: cleanup several ABI documents
  docs: ABI: sysfs-bus-nvdimm: use the right format for ABI
  docs: ABI: vdso: use the right format for ABI
  docs: ABI: fix syntax to be parsed using ReST notation
  docs: ABI: convert testing/configfs-acpi to ReST
  docs: Kconfig/Makefile: add a check for broken ABI files
  docs: abi-testing.rst: enable --rst-sources when building docs
  docs: ABI: don't escape ReST-incompatible chars from obsolete and removed
  docs: ABI: create a 2-depth index for ABI
  docs: ABI: make it parse ABI/stable as ReST-compatible files
  docs: ABI: sysfs-uevent: make it compatible with ReST output
  docs: ABI: testing: make the files compatible with ReST output
  ...

Pull staging driver fixes from Greg KH:
 "Here are some small staging driver fixes for issues that have been
  reported in 5.10-rc1:

   - octeon driver fixes

   - wfx driver fixes

   - memory leak fix in vchiq driver

   - fieldbus driver bugfix

   - comedi driver bugfix

  All of these have been in linux-next with no reported issues"

* tag 'staging-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: fieldbus: anybuss: jump to correct label in an error path
  staging: wfx: fix test on return value of gpiod_get_value()
  staging: wfx: fix use of uninitialized pointer
  staging: mmal-vchiq: Fix memory leak for vchiq_instance
  staging: comedi: cb_pcidas: Allow 2-channel commands for AO subdevice
  staging: octeon: Drop on uncorrectable alignment or FCS error
  staging: octeon: repair "fixed-link" support

Pull tty/serial fixes from Greg KH:
 "Here are some small TTY and Serial driver fixes for reported issues
  for 5.10-rc2. They include:

   - vt ioctl bugfix for reported problems

   - fsl_lpuart serial driver fix

   - 21285 serial driver bugfix

  All have been in linux-next with no reported issues"

* tag 'tty-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vt_ioctl: fix GIO_UNIMAP regression
  vt: keyboard, extend func_buf_lock to readers
  vt: keyboard, simplify vt_kdgkbsent
  tty: serial: fsl_lpuart: LS1021A has a FIFO size of 16 words, like LS1028A
  tty: serial: 21285: fix lockup on open

Pull USB driver fixes from Greg KH:
 "Here are a number of small bugfixes for reported issues in some USB
  drivers. They include:

   - typec bugfixes

   - xhci bugfixes and lockdep warning fixes

   - cdc-acm driver regression fix

   - kernel doc fixes

   - cdns3 driver bugfixes for a bunch of reported issues

   - other tiny USB driver fixes

  All have been in linux-next with no reported issues"

* tag 'usb-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: cdns3: gadget: own the lock wrongly at the suspend routine
  usb: cdns3: Fix on-chip memory overflow issue
  usb: cdns3: gadget: suspicious implicit sign extension
  xhci: Don't create stream debugfs files with spinlock held.
  usb: xhci: Workaround for S3 issue on AMD SNPS 3.0 xHC
  xhci: Fix sizeof() mismatch
  usb: typec: stusb160x: fix signedness comparison issue with enum variables
  usb: typec: add missing MODULE_DEVICE_TABLE() to stusb160x
  USB: apple-mfi-fastcharge: don't probe unhandled devices
  usbcore: Check both id_table and match() when both available
  usb: host: ehci-tegra: Fix error handling in tegra_ehci_probe()
  usb: typec: stusb160x: fix an IS_ERR() vs NULL check in probe
  usb: typec: tcpm: reset hard_reset_count for any disconnect
  usb: cdc-acm: fix cooldown mechanism
  usb: host: fsl-mph-dr-of: check return of dma_set_mask()
  usb: fix kernel-doc markups
  usb: typec: stusb160x: fix some signedness bugs
  usb: cdns3: Variable 'length' set but not used

Pull kvm fixes from Paolo Bonzini:
 "ARM:
   - selftest fix
   - force PTE mapping on device pages provided via VFIO
   - fix detection of cacheable mapping at S2
   - fallback to PMD/PTE mappings for composite huge pages
   - fix accounting of Stage-2 PGD allocation
   - fix AArch32 handling of some of the debug registers
   - simplify host HYP entry
   - fix stray pointer conversion on nVHE TLB invalidation
   - fix initialization of the nVHE code
   - simplify handling of capabilities exposed to HYP
   - nuke VCPUs caught using a forbidden AArch32 EL0

  x86:
   - new nested virtualization selftest
   - miscellaneous fixes
   - make W=1 fixes
   - reserve new CPUID bit in the KVM leaves"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: vmx: remove unused variable
  KVM: selftests: Don't require THP to run tests
  KVM: VMX: eVMCS: make evmcs_sanitize_exec_ctrls() work again
  KVM: selftests: test behavior of unmapped L2 APIC-access address
  KVM: x86: Fix NULL dereference at kvm_msr_ignored_check()
  KVM: x86: replace static const variables with macros
  KVM: arm64: Handle Asymmetric AArch32 systems
  arm64: cpufeature: upgrade hyp caps to final
  arm64: cpufeature: reorder cpus_have_{const, final}_cap()
  KVM: arm64: Factor out is_{vhe,nvhe}_hyp_code()
  KVM: arm64: Force PTE mapping on fault resulting in a device mapping
  KVM: arm64: Use fallback mapping sizes for contiguous huge page sizes
  KVM: arm64: Fix masks in stage2_pte_cacheable()
  KVM: arm64: Fix AArch32 handling of DBGD{CCINT,SCRext} and DBGVCR
  KVM: arm64: Allocate stage-2 pgd pages with GFP_KERNEL_ACCOUNT
  KVM: arm64: Drop useless PAN setting on host EL1 to EL2 transition
  KVM: arm64: Remove leftover kern_hyp_va() in nVHE TLB invalidation
  KVM: arm64: Don't corrupt tpidr_el2 on failed HVC call
  x86/kvm: Reserve KVM_FEATURE_MSI_EXT_DEST_ID

Pull vhost fixes from Michael Tsirkin:
 "Fixes all over the place.

  A new UAPI is borderline: can also be considered a new feature but
  also seems to be the only way we could come up with to fix addressing
  for userspace - and it seems important to switch to it now before
  userspace making assumptions about addressing ability of devices is
  set in stone"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vdpasim: allow to assign a MAC address
  vdpasim: fix MAC address configuration
  vdpa: handle irq bypass register failure case
  vdpa_sim: Fix DMA mask
  Revert "vhost-vdpa: fix page pinning leakage in error path"
  vdpa/mlx5: Fix error return in map_direct_mr()
  vhost_vdpa: Return -EFAULT if copy_from_user() fails
  vdpa_sim: implement get_iova_range()
  vhost: vdpa: report iova range
  vdpa: introduce config op to get valid iova range

Merge tag 'flexible-array-conversions-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull more flexible-array member conversions from Gustavo A. R. Silva:
 "Replace zero-length arrays with flexible-array members"

* tag 'flexible-array-conversions-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  printk: ringbuffer: Replace zero-length array with flexible-array member
  net/smc: Replace zero-length array with flexible-array member
  net/mlx5: Replace zero-length array with flexible-array member
  mei: hw: Replace zero-length array with flexible-array member
  gve: Replace zero-length array with flexible-array member
  Bluetooth: btintel: Replace zero-length array with flexible-array member
  scsi: target: tcmu: Replace zero-length array with flexible-array member
  ima: Replace zero-length array with flexible-array member
  enetc: Replace zero-length array with flexible-array member
  fs: Replace zero-length array with flexible-array member
  Bluetooth: Replace zero-length array with flexible-array member
  params: Replace zero-length array with flexible-array member
  tracepoint: Replace zero-length array with flexible-array member
  platform/chrome: cros_ec_proto: Replace zero-length array with flexible-array member
  platform/chrome: cros_ec_commands: Replace zero-length array with flexible-array member
  mailbox: zynqmp-ipi-message: Replace zero-length array with flexible-array member
  dmaengine: ti-cppi5: Replace zero-length array with flexible-array member

Pull dma-mapping fix from Christoph Hellwig:
 "Fix an integer overflow on 32-bit platforms in the new DMA range code
  (Geert Uytterhoeven)"

* tag 'dma-mapping-5.10-2' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: fix 32-bit overflow with CONFIG_ARM_LPAE=n

Pull SCSI fixes from James Bottomley:
 "Four driver fixes and one core fix.

  The core fix closes a race window where we could kick off a second
  asynchronous scan because the test and set of the variable preventing
  it isn't atomic"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: hisi_sas: Stop using queue #0 always for v2 hw
  scsi: ibmvscsi: Fix potential race after loss of transport
  scsi: mptfusion: Fix null pointer dereferences in mptscsih_remove()
  scsi: qla2xxx: Return EBUSY on fcport deletion
  scsi: core: Don't start concurrent async scan on same host

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Unless we want to test with THP, then we shouldn't require it to be
configured by the host kernel. Unfortunately, even advising with
MADV_NOHUGEPAGE does require it, so check for THP first in order
to avoid madvise failing with EINVAL.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201029201703.102716-2-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>