- 01 Dec, 2018 40 commits
-
-
Richard Weinberger authored
commit 34653fd8 upstream. Maintain a bitmap to keep track of which LEB->PEB mapping was checked already. That way we have to read back VID headers only once. Fixes: a23cf10d ("ubi: fastmap: Correctly handle interrupted erasures in EBA") Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
Martin Kepplinger <martin.kepplinger@ginzinger.com>
-
Johan Hovold authored
commit 5d1e9c22 upstream. Use the new of_get_compatible_child() helper to lookup the nfc child node instead of using of_find_compatible_node(), which searches the entire tree from a given start node and thus can return an unrelated (i.e. non-child) node. This also addresses a potential use-after-free (e.g. after probe deferral) as the tree-wide helper drops a reference to its first argument (i.e. the node of the device being probed). While at it, also fix a related nfc-node reference leak. Fixes: f88fc122 ("mtd: nand: Cleanup/rework the atmel_nand driver") Cc: stable <stable@vger.kernel.org> # 4.11 Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Josh Wu <rainyfeeling@outlook.com> Cc: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Cherian, George authored
commit 11644a76 upstream. Implement workaround for ThunderX2 Errata-129 (documented in CN99XX Known Issues" available at Cavium support site). As per ThunderX2errata-129, USB 2 device may come up as USB 1 if a connection to a USB 1 device is followed by another connection to a USB 2 device, the link will come up as USB 1 for the USB 2 device. Resolution: Reset the PHY after the USB 1 device is disconnected. The PHY reset sequence is done using private registers in XHCI register space. After the PHY is reset we check for the PLL lock status and retry the operation if it fails. From our tests, retrying 4 times is sufficient. Add a new quirk flag XHCI_RESET_PLL_ON_DISCONNECT to invoke the workaround in handle_xhci_port_status(). Cc: stable@vger.kernel.org Signed-off-by:
George Cherian <george.cherian@cavium.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Marc Zyngier authored
commit 36b68579 upstream. We now have 32 different quirks, and the field that holds them is full. Let's bump it up to the next stage so that we can handle some more... The type is now an unsigned long long, which is 64bit on most architectures. We take this opportunity to change the quirks from using (1 << x) to BIT_ULL(x). Tested-by:
Domenico Andreoli <domenico.andreoli@linux.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Tested-by:
Faiz Abbas <faiz_abbas@ti.com> Tested-by:
-
Greg Hackmann authored
(commit 1a381d4a upstream) Linking the ARM64 defconfig kernel with LLVM lld fails with the error: ld.lld: error: unknown argument: -p Makefile:1015: recipe for target 'vmlinux' failed Without this flag, the ARM64 defconfig kernel successfully links with lld and boots on Dragonboard 410c. After digging through binutils source and changelogs, it turns out that -p is only relevant to ancient binutils installations targeting 32-bit ARM. binutils accepts -p for AArch64 too, but it's always been undocumented and silently ignored. A comment in ld/emultempl/aarch64elf.em explains that it's "Only here for backwards compatibility". Since this flag is a no-op on ARM64, we can safely drop it. Acked-by:
Will Deacon <will.deacon@arm.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Greg Hackmann <ghackmann@google.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Johan Hovold authored
[ Upstream commit 9844fb2e ] Use the new of_get_compatible_child() helper to lookup the usb sibling node instead of using of_find_compatible_node(), which searches the entire tree from a given start node and thus can return an unrelated (non-sibling) node. This also addresses a potential use-after-free (e.g. after probe deferral) as the tree-wide helper drops a reference to its first argument (i.e. the parent device node). While at it, also fix the related phy-node reference leak. Fixes: f5e4edb8 ("power: twl4030_charger: find associated phy by more reliable means.") Cc: stable <stable@vger.kernel.org> # 4.2 Cc: NeilBrown <neilb@suse.de> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Sebastian Reichel <sre@kernel.org> Reviewed-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit ceff2f4d ] Use the new of_get_compatible_child() helper to lookup the sibling instead of using of_find_compatible_node(), which searches the entire tree from a given start node and thus can return an unrelated (i.e. non-sibling) node. This also addresses a potential use-after-free (e.g. after probe deferral) as the tree-wide helper drops a reference to its first argument (i.e. the parent device node). While at it, also fix the related cec-node reference leak. Fixes: 8f83f268 ("drm/mediatek: Add HDMI support") Cc: stable <stable@vger.kernel.org> # 4.8 Cc: Junzhi Zhao <junzhi.zhao@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: CK Hu <ck.hu@mediatek.com> Cc: David Airlie <airlied@linux.ie> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit d397dbe6 ] Use the new of_get_compatible_child() helper to lookup the mdio child node instead of using of_find_compatible_node(), which searches the entire tree from a given start node and thus can return an unrelated (i.e. non-child) node. This also addresses a potential use-after-free (e.g. after probe deferral) as the tree-wide helper drops a reference to its first argument (i.e. the node of the device being probed). Fixes: aa09677c ("net: bcmgenet: add MDIO routines") Cc: stable <stable@vger.kernel.org> # 3.15 Cc: David S. Miller <davem@davemloft.net> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit 5bf59773 ] Use the new of_get_compatible_child() helper to lookup the nfc child node instead of using of_find_compatible_node(), which searches the entire tree from a given start node and thus can return an unrelated (i.e. non-child) node. This also addresses a potential use-after-free (e.g. after probe deferral) as the tree-wide helper drops a reference to its first argument (i.e. the parent node). Fixes: e097dc62 ("NFC: nfcmrvl: add UART driver") Fixes: d8e018c0 ("NFC: nfcmrvl: update device tree bindings for Marvell NFC") Cc: stable <stable@vger.kernel.org> # 4.2 Cc: Vincent Cuissard <cuissard@marvell.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit 36156f92 ] Add of_get_compatible_child() helper that can be used to lookup compatible child nodes. Several drivers currently use of_find_compatible_node() to lookup child nodes while failing to notice that the of_find_ functions search the entire tree depth-first (from a given start node) and therefore can match unrelated nodes. The fact that these functions also drop a reference to the node they start searching from (e.g. the parent node) is typically also overlooked, something which can lead to use-after-free bugs. Signed-off-by:
-
Michal Hocko authored
[ Upstream commit c63ae43b ] Konstantin has noticed that kvmalloc might trigger the following warning: WARNING: CPU: 0 PID: 6676 at mm/vmstat.c:986 __fragmentation_index+0x54/0x60 [...] Call Trace: fragmentation_index+0x76/0x90 compaction_suitable+0x4f/0xf0 shrink_node+0x295/0x310 node_reclaim+0x205/0x250 get_page_from_freelist+0x649/0xad0 __alloc_pages_nodemask+0x12a/0x2a0 kmalloc_large_node+0x47/0x90 __kmalloc_node+0x22b/0x2e0 kvmalloc_node+0x3e/0x70 xt_alloc_table_info+0x3a/0x80 [x_tables] do_ip6t_set_ctl+0xcd/0x1c0 [ip6_tables] nf_setsockopt+0x44/0x60 SyS_setsockopt+0x6f/0xc0 do_syscall_64+0x67/0x120 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 the problem is that we only check for an out of bound order in the slow path and the node reclaim might happen from the fast path already. This is fixable by making sure that kvmalloc doesn't ever use kmalloc for requests that are larger than KMALLOC_MAX_SIZE but this also shows that the code is rather fragile. A recent UBSAN report just underlines that by the following report UBSAN: Undefined behaviour in mm/page_alloc.c:3117:19 shift exponent 51 is too large for 32-bit type 'int' CPU: 0 PID: 6520 Comm: syz-executor1 Not tainted 4.19.0-rc2 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xd2/0x148 lib/dump_stack.c:113 ubsan_epilogue+0x12/0x94 lib/ubsan.c:159 __ubsan_handle_shift_out_of_bounds+0x2b6/0x30b lib/ubsan.c:425 __zone_watermark_ok+0x2c7/0x400 mm/page_alloc.c:3117 zone_watermark_fast mm/page_alloc.c:3216 [inline] get_page_from_freelist+0xc49/0x44c0 mm/page_alloc.c:3300 __alloc_pages_nodemask+0x21e/0x640 mm/page_alloc.c:4370 alloc_pages_current+0xcc/0x210 mm/mempolicy.c:2093 alloc_pages include/linux/gfp.h:509 [inline] __get_free_pages+0x12/0x60 mm/page_alloc.c:4414 dma_mem_alloc+0x36/0x50 arch/x86/include/asm/floppy.h:156 raw_cmd_copyin drivers/block/floppy.c:3159 [inline] raw_cmd_ioctl drivers/block/floppy.c:3206 [inline] fd_locked_ioctl+0xa00/0x2c10 drivers/block/floppy.c:3544 fd_ioctl+0x40/0x60 drivers/block/floppy.c:3571 __blkdev_driver_ioctl block/ioctl.c:303 [inline] blkdev_ioctl+0xb3c/0x1a30 block/ioctl.c:601 block_ioctl+0x105/0x150 fs/block_dev.c:1883 vfs_ioctl fs/ioctl.c:46 [inline] do_vfs_ioctl+0x1c0/0x1150 fs/ioctl.c:687 ksys_ioctl+0x9e/0xb0 fs/ioctl.c:702 __do_sys_ioctl fs/ioctl.c:709 [inline] __se_sys_ioctl fs/ioctl.c:707 [inline] __x64_sys_ioctl+0x7e/0xc0 fs/ioctl.c:707 do_syscall_64+0xc4/0x510 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Note that this is not a kvmalloc path. It is just that the fast path really depends on having sanitzed order as well. Therefore move the order check to the fast path. Link: http://lkml.kernel.org/r/20181113094305.GM15120@dhcp22.suse.czSigned-off-by:
Michal Hocko <mhocko@suse.com> Reported-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reported-by:
Kyungtae Kim <kt0755@gmail.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Byoungyoung Lee <lifeasageek@gmail.com> Cc: "Dae R. Jeong" <threeearcat@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Yufen Yu authored
[ Upstream commit 1a413646 ] Other filesystems such as ext4, f2fs and ubifs all return ENXIO when lseek (SEEK_DATA or SEEK_HOLE) requests a negative offset. man 2 lseek says : EINVAL whence is not valid. Or: the resulting file offset would be : negative, or beyond the end of a seekable device. : : ENXIO whence is SEEK_DATA or SEEK_HOLE, and the file offset is beyond : the end of the file. Make tmpfs return ENXIO under these circumstances as well. After this, tmpfs also passes xfstests's generic/448. [akpm@linux-foundation.org: rewrite changelog] Link: http://lkml.kernel.org/r/1540434176-14349-1-git-send-email-yuyufen@huawei.comSigned-off-by:
Yufen Yu <yuyufen@huawei.com> Reviewed-by:
-
Vitaly Wool authored
[ Upstream commit ca0246bb ] Reclaim and free can race on an object which is basically fine but in order for reclaim to be able to map "freed" object we need to encode object length in the handle. handle_to_chunks() is then introduced to extract object length from a handle and use it during mapping. Moreover, to avoid racing on a z3fold "headless" page release, we should not try to free that page in z3fold_free() if the reclaim bit is set. Also, in the unlikely case of trying to reclaim a page being freed, we should not proceed with that page. While at it, fix the page accounting in reclaim function. This patch supersedes "[PATCH] z3fold: fix reclaim lock-ups". Link: http://lkml.kernel.org/r/20181105162225.74e8837d03583a9b707cf559@gmail.comSigned-off-by:
Vitaly Wool <vitaly.vul@sony.com> Signed-off-by:
Jongseok Kim <ks77sj@gmail.com> Reported-by-by:
Snild Dolkow <snild@sony.com> Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit 33412b86 ] Commit: 3ea86495 ("efi/arm: preserve early mapping of UEFI memory map longer for BGRT") deferred the unmap of the early mapping of the UEFI memory map to accommodate the ACPI BGRT code, which looks up the memory type that backs the BGRT table to validate it against the requirements of the UEFI spec. Unfortunately, this causes problems on ARM, which does not permit early mappings to persist after paging_init() is called, resulting in a WARN() splat. Since we don't support the BGRT table on ARM anway, let's revert ARM to the old behaviour, which is to take down the early mapping at the end of efi_init(). Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 3ea86495 ("efi/arm: preserve early mapping of UEFI memory ...") Link: http://lkml.kernel.org/r/20181114175544.12860-3-ard.biesheuvel@linaro.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Satheesh Rajendran authored
[ Upstream commit 437ccdc8 ] When VPHN function is not supported and during cpu hotplug event, kernel prints message 'VPHN function not supported. Disabling polling...'. Currently it prints on every hotplug event, it floods dmesg when a KVM guest tries to hotplug huge number of vcpus, let's just print once and suppress further kernel prints. Signed-off-by:
Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Prarit Bhargava authored
[ Upstream commit c2b94c72 ] gcc 8.1.0 warns with: kernel/debug/kdb/kdb_support.c: In function ‘kallsyms_symbol_next’: kernel/debug/kdb/kdb_support.c:239:4: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=] strncpy(prefix_name, name, strlen(name)+1); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ kernel/debug/kdb/kdb_support.c:239:31: note: length computed here Use strscpy() with the destination buffer size, and use ellipses when displaying truncated symbols. v2: Use strscpy() Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Cc: Jonathan Toppins <jtoppins@redhat.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: kgdb-bugreport@lists.sourceforge.net Reviewed-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit e3d5e573 ] Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Kan Liang authored
[ Upstream commit c10a8de0 ] KabyLake and CoffeeLake CPUs have the same client uncore events as SkyLake. Add the PCI IDs for the KabyLake Y, U, S processor lines and CoffeeLake U, H, S processor lines. Signed-off-by:
Kan Liang <kan.liang@linux.intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/20181019170419.378-1-kan.liang@linux.intel.comSigned-off-by:
-
Michael Ellerman authored
[ Upstream commit 43c6494f ] Back in 2006 Ben added some workarounds for a misbehaviour in the Spider IO bridge used on early Cell machines, see commit 014da7ff ("[POWERPC] Cell "Spider" MMIO workarounds"). Later these were made to be generic, ie. not tied specifically to Spider. The code stashes a token in the high bits (59-48) of virtual addresses used for IO (eg. returned from ioremap()). This works fine when using the Hash MMU, but when we're using the Radix MMU the bits used for the token overlap with some of the bits of the virtual address. This is because the maximum virtual address is larger with Radix, up to c00fffffffffffff, and in fact we use that high part of the address range for ioremap(), see RADIX_KERN_IO_START. As it happens the bits that are used overlap with the bits that differentiate an IO address vs a linear map address. If the resulting address lies outside the linear mapping we will crash (see below), if not we just corrupt memory. virtio-pci 0000:00:00.0: Using 64-bit direct DMA at offset 800000000000000 Unable to handle kernel paging request for data at address 0xc000000080000014 ... CFAR: c000000000626b98 DAR: c000000080000014 DSISR: 42000000 IRQMASK: 0 GPR00: c0000000006c54fc c00000003e523378 c0000000016de600 0000000000000000 GPR04: c00c000080000014 0000000000000007 0fffffff000affff 0000000000000030 ^^^^ ... NIP [c000000000626c5c] .iowrite8+0xec/0x100 LR [c0000000006c992c] .vp_reset+0x2c/0x90 Call Trace: .pci_bus_read_config_dword+0xc4/0x120 (unreliable) .register_virtio_device+0x13c/0x1c0 .virtio_pci_probe+0x148/0x1f0 .local_pci_probe+0x68/0x140 .pci_device_probe+0x164/0x220 .really_probe+0x274/0x3b0 .driver_probe_device+0x80/0x170 .__driver_attach+0x14c/0x150 .bus_for_each_dev+0xb8/0x130 .driver_attach+0x34/0x50 .bus_add_driver+0x178/0x2f0 .driver_register+0x90/0x1a0 .__pci_register_driver+0x6c/0x90 .virtio_pci_driver_init+0x2c/0x40 .do_one_initcall+0x64/0x280 .kernel_init_freeable+0x36c/0x474 .kernel_init+0x24/0x160 .ret_from_kernel_thread+0x58/0x7c This hasn't been a problem because CONFIG_PPC_IO_WORKAROUNDS which enables this code is usually not enabled. It is only enabled when it's selected by PPC_CELL_NATIVE which is only selected by PPC_IBM_CELL_BLADE and that in turn depends on BIG_ENDIAN. So in order to hit the bug you need to build a big endian kernel, with IBM Cell Blade support enabled, as well as Radix MMU support, and then boot that on Power9 using Radix MMU. Still we can fix the bug, so let's do that. We simply use fewer bits for the token, taking the union of the restrictions on the address from both Hash and Radix, we end up with 8 bits we can use for the token. The only user of the token is iowa_mem_find_bus() which only supports 8 token values, so 8 bits is plenty for that. Fixes: 566ca99a ("powerpc/mm/radix: Add dummy radix_enabled()") Signed-off-by:
-
Jens Axboe authored
[ Upstream commit de7b75d8 ] LKP recently reported a hang at bootup in the floppy code: [ 245.678853] INFO: task mount:580 blocked for more than 120 seconds. [ 245.679906] Tainted: G T 4.19.0-rc6-00172-ga9f38e1d #1 [ 245.680959] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 245.682181] mount D 6372 580 1 0x00000004 [ 245.683023] Call Trace: [ 245.683425] __schedule+0x2df/0x570 [ 245.683975] schedule+0x2d/0x80 [ 245.684476] schedule_timeout+0x19d/0x330 [ 245.685090] ? wait_for_common+0xa5/0x170 [ 245.685735] wait_for_common+0xac/0x170 [ 245.686339] ? do_sched_yield+0x90/0x90 [ 245.686935] wait_for_completion+0x12/0x20 [ 245.687571] __floppy_read_block_0+0xfb/0x150 [ 245.688244] ? floppy_resume+0x40/0x40 [ 245.688844] floppy_revalidate+0x20f/0x240 [ 245.689486] check_disk_change+0x43/0x60 [ 245.690087] floppy_open+0x1ea/0x360 [ 245.690653] __blkdev_get+0xb4/0x4d0 [ 245.691212] ? blkdev_get+0x1db/0x370 [ 245.691777] blkdev_get+0x1f3/0x370 [ 245.692351] ? path_put+0x15/0x20 [ 245.692871] ? lookup_bdev+0x4b/0x90 [ 245.693539] blkdev_get_by_path+0x3d/0x80 [ 245.694165] mount_bdev+0x2a/0x190 [ 245.694695] squashfs_mount+0x10/0x20 [ 245.695271] ? squashfs_alloc_inode+0x30/0x30 [ 245.695960] mount_fs+0xf/0x90 [ 245.696451] vfs_kern_mount+0x43/0x130 [ 245.697036] do_mount+0x187/0xc40 [ 245.697563] ? memdup_user+0x28/0x50 [ 245.698124] ksys_mount+0x60/0xc0 [ 245.698639] sys_mount+0x19/0x20 [ 245.699167] do_int80_syscall_32+0x61/0x130 [ 245.699813] entry_INT80_32+0xc7/0xc7 showing that we never complete that read request. The reason is that the completion setup is racy - it initializes the completion event AFTER submitting the IO, which means that the IO could complete before/during the init. If it does, we are passing garbage to complete() and we may sleep forever waiting for the event to occur. Fixes: 7b7b68bb ("floppy: bail out in open() if drive is not responding to block0 read") Reviewed-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit 508a1c4d ] The simd wrapper's skcipher request context structure consists of a single subrequest whose size is taken from the subordinate skcipher. However, in simd_skcipher_init(), the reqsize that is retrieved is not from the subordinate skcipher but from the cryptd request structure, whose size is completely unrelated to the actual wrapped skcipher. Reported-by:
Qian Cai <cai@gmx.us> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Xulin Sun authored
[ Upstream commit 9bde0afb ] pcf2127_i2c_gather_write() allocates memory as local variable for i2c_master_send(), after finishing the master transfer, the allocated memory should be freed. The kmemleak is reported: unreferenced object 0xffff80231e7dba80 (size 64): comm "hwclock", pid 27762, jiffies 4296880075 (age 356.944s) hex dump (first 32 bytes): 03 00 12 03 19 02 11 13 00 80 98 18 00 00 ff ff ................ 00 50 00 00 00 00 00 00 02 00 00 00 00 00 00 00 .P.............. backtrace: [<ffff000008221398>] create_object+0xf8/0x278 [<ffff000008a96264>] kmemleak_alloc+0x74/0xa0 [<ffff00000821070c>] __kmalloc+0x1ac/0x348 [<ffff0000087ed1dc>] pcf2127_i2c_gather_write+0x54/0xf8 [<ffff0000085fd9d4>] _regmap_raw_write+0x464/0x850 [<ffff0000085fe3f4>] regmap_bulk_write+0x1a4/0x348 [<ffff0000087ed32c>] pcf2127_rtc_set_time+0xac/0xe8 [<ffff0000087eaad8>] rtc_set_time+0x80/0x138 [<ffff0000087ebfb0>] rtc_dev_ioctl+0x398/0x610 [<ffff00000823f2c0>] do_vfs_ioctl+0xb0/0x848 [<ffff00000823fae4>] SyS_ioctl+0x8c/0xa8 [<ffff000008083ac0>] el0_svc_naked+0x34/0x38 [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by:
Xulin Sun <xulin.sun@windriver.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Anson Huang authored
[ Upstream commit 6ef28a04 ] Add return value check for voltage scale when ARM clock rate change fail. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Scott Wood authored
[ Upstream commit 28c5bcf7 ] TRACE_INCLUDE_PATH and TRACE_INCLUDE_FILE are used by <trace/define_trace.h>, so like that #include, they should be outside #ifdef protection. They also need to be #undefed before defining, in case multiple trace headers are included by the same C file. This became the case on book3e after commit cf4a6085 ("powerpc/mm: Add missing tracepoint for tlbie"), leading to the following build error: CC arch/powerpc/kvm/powerpc.o In file included from arch/powerpc/kvm/powerpc.c:51:0: arch/powerpc/kvm/trace.h:9:0: error: "TRACE_INCLUDE_PATH" redefined [-Werror] #define TRACE_INCLUDE_PATH . ^ In file included from arch/powerpc/kvm/../mm/mmu_decl.h:25:0, from arch/powerpc/kvm/powerpc.c:48: ./arch/powerpc/include/asm/trace.h:224:0: note: this is the location of the previous definition #define TRACE_INCLUDE_PATH asm ^ cc1: all warnings being treated as errors Reported-by:
Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by:
Scott Wood <oss@buserror.net> Signed-off-by:
-
Jerome Brunet authored
[ Upstream commit e39f9dd8 ] If a bias is enabled on a pin of an Amlogic SoC, calling .pin_config_set() with PIN_CONFIG_BIAS_DISABLE will not disable the bias. Instead it will force a pull-down bias on the pin. Instead of the pull type register bank, the driver should access the pull enable register bank. Fixes: 6ac73095 ("pinctrl: add driver for Amlogic Meson SoCs") Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Michael J. Ruhl authored
commit a0e0cb82 upstream. pq_update() can only be called in two places: from the completion function when the complete (npkts) sequence of packets has been submitted and processed, or from setup function if a subset of the packets were submitted (i.e. the error path). Currently both paths can call pq_update() if an error occurrs. This race will cause the n_req value to go negative, hanging file_close(), or cause a crash by freeing the txlist more than once. Several variables are used to determine SDMA send state. Most of these are unnecessary, and have code inspectible races between the setup function and the completion function, in both the send path and the error path. The request 'status' value can be set by the setup or by the completion function. This is code inspectibly racy. Since the status is not needed in the completion code or by the caller it has been removed. The request 'done' value races between usage by the setup and the completion function. The completion function does not need this. When the number of processed packets matches npkts, it is done. The 'has_error' value races between usage of the setup and the completion function. This can cause incorrect error handling and leave the n_req in an incorrect value (i.e. negative). Simplify the code by removing all of the unneeded state checks and variables. Clean up iovs node when it is freed. Eliminate race conditions in the error path: If all packets are submitted, the completion handler will set the completion status correctly (ok or aborted). If all packets are not submitted, the caller must wait until the submitted packets have completed, and then set the completion status. These two change eliminate the race condition in the error path. Reviewed-by:
Mitko Haralanov <mitko.haralanov@intel.com> Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Lukas Wunner authored
commit f164d020 upstream. If the hi3110 shares the SPI bus with another traffic-intensive device and packets are received in high volume (by a separate machine sending with "cangen -g 0 -i -x"), reception stops after a few minutes and the counter in /proc/interrupts stops incrementing. Bus state is "active". Bringing the interface down and back up reconvenes the reception. The issue is not observed when the hi3110 is the sole device on the SPI bus. Using a level-triggered interrupt makes the issue go away and lets the hi3110 successfully receive 2 GByte over the course of 5 days while a ks8851 Ethernet chip on the same SPI bus handles 6 GByte of traffic. Unfortunately the hi3110 datasheet is mum on the trigger type. The pin description on page 3 only specifies the polarity (active high): http://www.holtic.com/documents/371-hi-3110_v-rev-kpdf.do Cc: Mathias Duckeck <m.duckeck@kunbus.de> Cc: Akshay Bhat <akshay.bhat@timesys.com> Cc: Casey Fitzpatrick <casey.fitzpatrick@timesys.com> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Oliver Hartkopp authored
commit a43608fa upstream. When the socket is CAN FD enabled it can handle CAN FD frame transmissions. Add an additional check in raw_sendmsg() as a CAN2.0 CAN driver (non CAN FD) should never see a CAN FD frame. Due to the commonly used can_dropped_invalid_skb() function the CAN 2.0 driver would drop that CAN FD frame anyway - but with this patch the user gets a proper -EINVAL return code. Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Oleksij Rempel authored
commit 4530ec36 upstream. This function has nothing todo with error. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Oleksij Rempel authored
can: rx-offload: introduce can_rx_offload_get_echo_skb() and can_rx_offload_queue_sorted() functions commit 55059f2b upstream. Current CAN framework can't guarantee proper/chronological order of RX and TX-ECHO messages. To make this possible, drivers should use this functions instead of can_get_echo_skb(). Signed-off-by:
-
Marc Kleine-Budde authored
commit 7da11ba5 upstream. Prior to echoing a successfully transmitted CAN frame (by calling can_get_echo_skb()), CAN drivers have to put the CAN frame (by calling can_put_echo_skb() in the transmit function). These put and get function take an index as parameter, which is used to identify the CAN frame. A driver calling can_get_echo_skb() with a index not pointing to a skb is a BUG, so add an appropriate error message. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Marc Kleine-Budde authored
can: dev: __can_get_echo_skb(): Don't crash the kernel if can_priv::echo_skb is accessed out of bounds commit e7a6994d upstream. If the "struct can_priv::echo_skb" is accessed out of bounds would lead to a kernel crash. Better print a sensible warning message instead and try to recover. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Marc Kleine-Budde authored
commit 200f5c49 upstream. This patch replaces the use of "struct can_frame::can_dlc" by "struct canfd_frame::len" to access the frame's length. As it is ensured that both structures have a compatible memory layout for this member this is no functional change. Futher, this compatibility is documented in a comment. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Marc Kleine-Budde authored
commit a4310fa2 upstream. This patch factors out all non sending parts of can_get_echo_skb() into a seperate function __can_get_echo_skb(), so that it can be re-used in an upcoming patch. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Thomas Zimmermann authored
commit 5478ad10 upstream. If vesafb attaches to the AST device, it configures the framebuffer memory for uncached access by default. When ast.ko later tries to attach itself to the device, it wants to use write-combining on the framebuffer memory, but vesefb's existing configuration for uncached access takes precedence. This results in reduced performance. Removing the framebuffer's configuration before loding the AST driver fixes the problem. Other DRM drivers already contain equivalent code. Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1112963Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Cc: <stable@vger.kernel.org> Tested-by:
Y.C. Chen <yc_chen@aspeedtech.com> Reviewed-by:
Jean Delvare <jdelvare@suse.de> Tested-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Y.C. Chen authored
commit 7989b9ee upstream. Signed-off-by:
-
Y.C. Chen authored
commit 1a37bd82 upstream. The value of pitches is not correct while calling mode_set. The issue we found so far on following system: - Debian8 with XFCE Desktop - Ubuntu with KDE Desktop - SUSE15 with KDE Desktop Signed-off-by:
-
Mathias Nyman authored
commit 2f31a67f upstream. USB3 roothub might autosuspend before a plugged USB3 device is detected, causing USB3 device enumeration failure. USB3 devices don't show up as connected and enabled until USB3 link trainig completes. On a fast booting platform with a slow USB3 link training the link might reach the connected enabled state just as the bus is suspending. If this device is discovered first time by the xhci_bus_suspend() routine it will be put to U3 suspended state like the other ports which failed to suspend earlier. The hub thread will notice the connect change and resume the bus, moving the port back to U0 This U0 -> U3 -> U0 transition right after being connected seems to be too much for some devices, causing them to first go to SS.Inactive state, and finally end up stuck in a polling state with reset asserted Fix this by failing the bus suspend if a port has a connect change or is in a polling state in xhci_bus_suspend(). Don't do any port changes until all ports are checked, buffer all port changes and only write them in the end if suspend can proceed Cc: stable@vger.kernel.org Signed-off-by:
-
Parav Pandit authored
commit b2bedfb3 upstream. Currently qp->port stores the port number whenever IB_QP_PORT QP attribute mask is set (during QP state transition to INIT state). This port number should be stored for the real QP when XRC target QP is used. Follow the ib_modify_qp() implementation and hide the access to ->real_qp. Fixes: a512c2fb ("IB/core: Introduce modify QP operation with udata") Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
-
Eric Dumazet authored
commit 8873c064 upstream. syzkaller was able to hit the WARN_ON(sock_owned_by_user(sk)); in tcp_close() While a socket is being closed, it is very possible other threads find it in rtnetlink dump. tcp_get_info() will acquire the socket lock for a short amount of time (slow = lock_sock_fast(sk)/unlock_sock_fast(sk, slow);), enough to trigger the warning. Fixes: 67db3e4b ("tcp: no longer hold ehash lock while calling tcp_get_info()") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
