Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Extend slot-gpio to be used for host specific card detect interrupts
   - Align to common busy polling behaviour for mmc ioctls
   - Suggest the BFQ I/O scheduler to be built along with MMC/SD support
   - Add devm_mmc_alloc_host() to enable further cleanups in host drivers

  MMC host:
   - atmel-mci: Fix race condition when stopping/starting a command
   - dw_mmc-starfive: Add new driver to support the StarFive JH7110 variant
   - dw_mmc-rockchip: Add support for the RK3588 variant
   - jz4740: Add support for the vqmmc power supply
   - meson-gx: Convert the DT bindings to the dt-schema
   - meson-gx: Enable the platform interrupt to be used for card detect
   - moxart: Set the supported maximum request/block/segment sizes
   - renesas,sdhi: Add support for the RZ/V2M variants
   - sdhci: Rework code to drop SDHCI_QUIRK_MISSING_CAPS
   - sdhci-esdhc-imx: Improve tuning logic support
   - sdhci-msm: Add support for the IPQ5332 and the IPQ9574 variants
   - sdhci-of-dwcmshc: Add the missing device table IDs for acpi
   - sdhci-of-dwcmshc: Improve clock support for the Rockchip variant
   - sdhci-of-dwcmshc: Enable support of V4 host for the BlueField-3 variant
   - sdhci-pxav2: Add support for the PXA168 V1 variant
   - sdhci-pxav2: Add support for SDIO IRQs for the PXA168 V1 variant
   - uniphier-sd: Add support for SD UHS-I speed modes"

* tag 'mmc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
  mmc: meson-gx: Use devm_platform_get_and_ioremap_resource()
  mmc: meson-gx: constify member data of struct meson_host
  mmc: meson-gx: use devm_clk_get_enabled() for core clock
  mmc: core: fix return value check in devm_mmc_alloc_host()
  dt-bindings: mmc: meson-gx: fix interrupt binding
  mmc: meson-gx: support platform interrupt as card detect interrupt
  dt-bindings: mmc: meson-gx: support specifying cd interrupt
  mmc: core: support setting card detect interrupt from drivers
  mmc: starfive: Add sdio/emmc driver support
  dt-bindings: mmc: Add StarFive MMC module
  dt-bindings: mmc: sdhci-msm: Allow 1 icc path
  dt-bindings: mmc: rockchip-dw-mshc: Add RK3588 compatible string
  mmc: core: Align to common busy polling behaviour for mmc ioctls
  dt-bindings: mmc: Add resets property to cadence SDHCI binding
  mmc: meson-gx: remove meson_mmc_get_cd
  mmc: moxart: set maximum request/block/segment sizes
  mmc: sdhci-brcmstb: Use devm_platform_get_and_ioremap_resource()
  mmc: sdhci-of-dwcmshc: add the missing device table IDs for acpi
  mmc: sdhci-of-dwcmshc: Update DLL and pre-change delay for rockchip platform
  mmc: jz4740: Add support for vqmmc power supply
  ...

Pull dma-mapping updates from Christoph Hellwig:

 - remove a not very useful and now unused swiotlb API (Christoph
   Hellwig)

 - fix a section mismatch (Randy Dunlap)

* tag 'dma-mapping-6.3-2022-02-27' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: mark swiotlb_memblock_alloc() as __init
  swiotlb: remove swiotlb_max_segment

Pull memblock updates from Mike Rapoport:
 "Small optimizations:

   - fix off-by-one in the check whether memblock_add_range() should
     reallocate memory to accommodate newly inserted range

   - check only for relevant regions in memblock_merge_regions() rather
     than swipe over the entire array"

* tag 'memblock-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock: Avoid useless checks in memblock_merge_regions().
  memblock: Make a boundary tighter in memblock_add_range().

Pull m68knommu updates from Greg Ungerer:

 - spelling fixes

* tag 'm68knommu-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: nommu: Fix misspellings of "DragonEngine"
  m68k: nommu: Fix misspellings of "uCdimm"

Pull csky update from Guo Ren:

 - Optimize delay accuracy

* tag 'csky-for-linus-6.3' of https://github.com/c-sky/csky-linux:
  csky: delay: Add function alignment

Pull remoteproc updates from Bjorn Andersson:

 - Support for PRU clients to acquire a control reference to the PRU
   instances is introduced, and the PRU now allows specifying
   firmware-name in Devicetree. sysfs is requested to be read-only when
   the remoteproc instance is consumed by another kernel driver

 - Support for the C7xv DSP on AM62A SoC is introduced

 - The Devicetree binding for the Qualcomm PAS devices are split up in
   multiple files, to better account for the differences in resources
   between them. A number of missing Devicetree bindings are added, and
   the Qualcomm WCNSS binding is converted to YAML

 - A few cleanups are introduced for the Mediatek SCP driver. And a
   sanity check of the firmware image is introduced in the Mediatek
   driver

 - For Qualcomm SC7280 ADSP support is added, MSM8953 gains ADSP and
   modem support, SM6115 and SM8550 gains ADSP, CDSP and modem support,
   and support for pronto v3 support (used on e.g. MSM8953) is added

 - The Qualcomm modem remoteproc driver is modified to use a no-map
   reserved-memory region for it's authentication metadata, in order to
   avoid fatal security violations caused by accesses from Linux during
   the authentication process

 - Support for separate loading of a Devicetree blob is added to the PAS
   driver, and support for the PAS driver to carve out DSM memory for
   the modem is added as well

 - The Qualcomm ADSP remoteproc driver gains support for mapping memory
   into specific range using the IOMMU. The sysmon driver is
   transitioned to strlcpy()

* tag 'rproc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (69 commits)
  dt-bindings: mailbox: qcom,apcs-kpss-global: drop mbox-names from example
  dt-bindings: remoteproc: qcom,glink-edge: correct label description
  dt-bindings: remoteproc: qcom,glink-rpm-edge: convert to DT schema
  dt-bindings: remoteproc: qcom,sm8550-pas: correct power domains
  remoteproc: qcom_q6v5_pas: enable sm8550 adsp & cdsp autoboot
  dt-bindings: remoteproc: qcom: Add sm6115 pas yaml file
  remoteproc: qcom: pas: Add sm6115 remoteprocs
  remoteproc: qcom: pas: Adjust the phys addr wrt the mem region
  remoteproc: qcom: fix sparse warnings
  remoteproc: qcom: replace kstrdup with kstrndup
  remoteproc: mediatek: Check the SCP image format
  remoteproc: qcom_q6v5_mss: Use a carveout to authenticate modem headers
  Revert "remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use"
  dt-bindings: remoteproc: qcom,sc7280-mss-pil: Update memory-region
  dt-bindings: remoteproc: qcom,sc7180-mss-pil: Update memory-region
  dt-bindings: remoteproc: qcom,msm8996-mss-pil: Update memory region
  dt-bindings: remoteproc: qcom,q6v5: Move MSM8996 to schema
  remoteproc: qcom_q6v5_pas: add sm8550 adsp, cdsp & mpss compatible & data
  remoteproc: qcom_q6v5_pas: add support for assigning memory to firmware
  remoteproc: qcom_q6v5_pas: add support for dtb co-firmware loading
  ...

Pull rpmsg updates from Bjorn Andersson:

 - rpmsg ctrl and char driver locking is ensure ordering in cases where
   the communication link is being torn down in parallel with calls to
   open(2) or poll(2)

 - The glink driver is refactored, to move rpm/smem-specifics out of the
   common logic and better suite further improvements, such as
   transports without a mailbox controller. The handling of remoteproc
   shutdown is improved, to fail clients immediately instead of having
   them to wait for timeouts. A driver_override memory leak is corrected
   and a few spelling improvements are introduced

 - glink_ssr is transitioned off strlcpy() and "gpr" is added as a valid
   child node of the glink-edge DT binding

* tag 'rpmsg-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  rpmsg: glink: Release driver_override
  rpmsg: glink: Avoid infinite loop on intent for missing channel
  rpmsg: glink: Fix GLINK command prefix
  rpmsg: glink: Fix spelling of peek
  rpmsg: glink: Cancel pending intent requests at removal
  rpmsg: glink: Fail qcom_glink_tx() once remove has been initiated
  rpmsg: glink: Move irq and mbox handling to transports
  rpmsg: glink: rpm: Wrap driver context
  rpmsg: glink: smem: Wrap driver context
  rpmsg: glink: Extract tx kick operation
  rpmsg: glink: Include types in qcom_glink_native.h
  rpmsg: ctrl: Add lock to rpmsg_ctrldev_remove
  rpmsg: char: Add lock to avoid race when rpmsg device is released
  rpmsg: move from strlcpy with unused retval to strscpy
  dt-bindings: remoteproc: qcom,glink-edge: add GPR node

Pull hwspinlock updates from Bjorn Andersson:
 "This updates the sun6i DT binding to allow (and require) #hwlock-cells
  and makes use of device_match_of_node() to slight clean up the
  condition in of_hwspin_lock_get_id()"

* tag 'hwlock-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  dt-bindings: hwlock: sun6i: Add #hwlock-cells to example
  dt-bindings: hwlock: sun6i: Add missing #hwlock-cells
  hwspinlock: Use device_match_of_node()

Pull Kbuild updates from Masahiro Yamada:

 - Change V=1 option to print both short log and full command log

 - Allow V=1 and V=2 to be combined as V=12

 - Make W=1 detect wrong .gitignore files

 - Tree-wide cleanups for unused command line arguments passed to Clang

 - Stop using -Qunused-arguments with Clang

 - Make scripts/setlocalversion handle only correct release tags instead
   of any arbitrary annotated tag

 - Create Debian and RPM source packages without cleaning the source
   tree

 - Various cleanups for packaging

* tag 'kbuild-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (74 commits)
  kbuild: rpm-pkg: remove unneeded KERNELRELEASE from modules/headers_install
  docs: kbuild: remove description of KBUILD_LDS_MODULE
  .gitattributes: use 'dts' diff driver for *.dtso files
  kbuild: deb-pkg: improve the usability of source package
  kbuild: deb-pkg: fix binary-arch and clean in debian/rules
  kbuild: tar-pkg: use tar rules in scripts/Makefile.package
  kbuild: make perf-tar*-src-pkg work without relying on git
  kbuild: deb-pkg: switch over to source format 3.0 (quilt)
  kbuild: deb-pkg: make .orig tarball a hard link if possible
  kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile
  kbuild: srcrpm-pkg: create source package without cleaning
  kbuild: rpm-pkg: build binary packages from source rpm
  kbuild: deb-pkg: create source package without cleaning
  kbuild: add a tool to list files ignored by git
  Documentation/llvm: add Chimera Linux, Google and Meta datacenters
  setlocalversion: use only the correct release tag for git-describe
  setlocalversion: clean up the construction of version output
  .gitignore: ignore *.cover and *.mbx
  kbuild: remove --include-dir MAKEFLAG from top Makefile
  kbuild: fix trivial typo in comment
  ...

Pull media updates from Mauro Carvalho Chehab:

 - Removal of several VB1-only deprecated drivers: cpia2, fsl-viu, meye,
   stkwebcam, tm6000, vpfe_capture and zr364xx

 - saa7146 recovered from staging/deprecated. We opted to give ti a
   chance, and, instead of deprecating it, the intention is to write
   patches migrating it from VB1 to VB2.

 - av7110 returned from staging/deprecated/ to staging/ as we're not
   planning on dropping it any time soon

 - media controller API has gained experimental support for G_ROUTING
   and streams API. No drivers use it right now. We're planning to add
   one after -rc1, giving some time to experience the API and eventually
   have changes during the next development cycle

 - New sensor drivers: imx296, imx415, ov8858

 - Atomisp had lots of changes, specially on its sensor's interface,
   making atomisp sensor drivers closer to normal sensor drivers

 - media controller kAPI has gained some helpers to traverse pipelines

 - uvcvideo now better support power line control

 - lots of bug fixes, cleanups and driver improvements

* tag 'media/v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (296 commits)
  media: imx-mipi-csis: Check csis_fmt validity before use
  media: v4l2-subdev.c: clear stream field
  media: v4l2-ctrls-api.c: move ctrl->is_new = 1 to the correct line
  media: Revert "media: saa7146: deprecate hexium_gemini/orion, mxb and ttpci"
  media: Revert "media: av7110: move to staging/media/deprecated/saa7146"
  media: imx-pxp: convert to regmap
  media: imx-pxp: Use non-threaded IRQ
  media: imx-pxp: Introduce pxp_read() and pxp_write() wrappers
  media: imx-pxp: Implement frame size enumeration
  media: imx-pxp: Pass pixel format value to find_format()
  media: imx-pxp: Add media controller support
  media: imx-pxp: Don't set bus_info manually in .querycap()
  media: imx-pxp: Sort headers alphabetically
  media: imx-pxp: add support for i.MX7D
  media: imx-pxp: make data_path_ctrl0 platform dependent
  media: imx-pxp: disable LUT block
  media: imx-pxp: explicitly disable unused blocks
  media: imx-pxp: extract helper function to setup data path
  media: imx-pxp: detect PXP version
  media: dt-bindings: media: fsl-pxp: convert to yaml
  ...

Long long ago, in a more innocent time, Greg wrote the clarification for
how the DCO should work and that you couldn't make anonymous
contributions, because the sign-off needed to be something we could
check back with.

It was 2006, and nobody reacted to the wording, the whole Facebook 'real
name' controversy was a decade in the future, and nobody even thought
about it.  And despite the language, we've always accepted nicknames and
that language was never meant to be any kind of exclusionary wording.

In fact, even when it became a discussion in other adjacent projects,
apparently nobody even thought to just clarify the language in the
kernel docs, and instead we had projects like the CNCF that had long
discussions about it, and wrote their own clarifications [1] of it.

Just simplify the wording to the point where it shouldn't be causing
unnecessary angst and pain, or scare away people who go by preferred
naming.

Link: https://github.com/cncf/foundation/blob/659fd32c86dc/dco-guidelines.md [1]
Fixes: af45f32d ("We can not allow anonymous contributions to the kernel")
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Acked-by: Michael Dolan <mdolan@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The find_csis_format() may return NULL in case supported format is not
found, check the return value of find_csis_format() before using the
result to avoid NULL pointer dereference.

Fixes: 11927d0f ("media: imx-mipi-csis: Use V4L2 subdev active state")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Both userspace and kernelspace can pass structs with an uninitialized
'stream' field. Since the check_state() function checks for a non-zero
stream field, suddenly these calls will fails with -EINVAL.

So check in the wrapper functions in v4l2-subdev.c (which are used by both
the kernel and userspace API) if V4L2_SUBDEV_FL_STREAMS is set, and if not,
then zero the stream field.

Currently no drivers set V4L2_SUBDEV_FL_STREAMS, so the stream field will
always be set to 0.

This patch might well be reverted in the future when streams support is
fully enabled and we finalized the userspace API support for this feature.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

This is a temporary workaround added by commit f6e09b07 ("kbuild:
do not put .scmversion into the source tarball").

Since commit 1cb86b6c ("kbuild: save overridden KERNELRELEASE in
include/config/kernel.release"), the user-supplied KERNELRELEASE is
saved in include/config/kernel.release.

Remove it again.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>

Commit 596b0474 ("kbuild: preprocess module linker script")
removes KBUILD_LDS_MODULE, yet the variable is still mentioned in
kbuild documentation. Remove the reference to the now-nonexistent
variable.
Signed-off-by: Sangmoon Kim <sangmoon.kim@samsung.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Now we have the third extension for DT source files (overlay).
Give the diff=dts attribute to *.dtso as well.

While I was here, I merged *.c and *.o into *.[ch] and added the
SPDX-License-Identifier.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Improve the source package support in case the dpkg-buildpackage is
directly used to build binary packages.

For cross-compiling, you can set CROSS_COMPILE via the environment
variable, but it is better to set it automatically - set it to
${DEB_HOST_GNU_TYPE}- if we are cross-compiling but not from the top
Makefile.

The generated source package may be carried to a different build
environment, which may have a different compiler installed.
Run olddefconfig first to set new CONFIG options to their default
values without prompting.

Take KERNELRELEASE and KBUILD_BUILD_VERSION from the version field of
debian/changelog in case it is updated afterwards.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The clean target needs ARCH=${ARCH} to clean up the tree for the correct
architecture. 'make (bin)deb-pkg' skips cleaning, but the preclean hook
may be executed if dpkg-buildpackage is directly used.

The binary-arch target does not need KERNELRELEASE because it is not
updated during the installation. KBUILD_BUILD_VERSION is not needed
either because binary-arch does not build vmlinux.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Use %.tar, %.tar.gz, %.tar.bz2, %.tar.xz, %.tar.zst rules in
scripts/Makefile.package.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Currently, perf-tar*-src-pkg only uses 'git archive', but it is better
to make it work without relying on git.

The file, HEAD, which saves the commit hash, will be included in the
tarball only when the source tree is managed by git. The git tree is
more precisely checked; it has been copied from scripts/setlocalversion.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Change the source format from "1.0" to "3.0 (quilt)" because it works
more cleanly.

All files except .config and debian/ go into the orig tarball.
Add a single patch, debian/patches/config, and delete the ugly
extend-diff-ignore patterns.

The debian tarball will be compressed into *.debian.tar.xz by default.
If you like to use a different compression mode, you can pass the
command line option, DPKG_FLAGS=-Zgzip, for example.

The orig tarball only supports gzip for now. The combination of
gzip and xz is somewhat clumsy, but it is not a practical problem.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

If '..' belongs to the same filesystem, create a hard link instead of
a copy. In most cases, you can save disk space.

I do not want to use 'mv' because keeping linux.tar.gz is useful to
avoid unneeded rebuilding of the tarball.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

scripts/Makefile.package does not need to know the value of
KDEB_SOURCENAME because the source name can be taken from
debian/changelog by using dpkg-parsechangelog.

Move the default of KDEB_SOURCENAME (i.e. linux-upstream) to
scripts/package/mkdebian.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

If you run 'make (src)rpm-pkg', all objects are lost due to 'make clean',
which makes the incremental builds impossible.

Instead of cleaning, pass the exclude list to tar's --exclude-from
option.

Previously, the .config was contained in the source tarball.

With this commit, the source rpm consists of separate linux.tar.gz
and .config.

Remove stale comments. Now, 'make (src)rpm-pkg' works with O= option.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The build rules of rpm-pkg and srcrpm-pkg are almost the same.
Remove the code duplication.

Change rpm-pkg to build binary packages from the source package generated
by srcrpm-pkg.

This changes the output directory of the srpm generated by 'make rpm-pkg'
because srcrpm-pkg overrides _srcrpmdir.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

If you run 'make deb-pkg', all objects are lost due to 'make clean',
which makes the incremental builds impossible.

Instead of cleaning, pass the exclude list to tar's --exclude-from
option.

Previously, *.diff.gz contained some check-in files such as
.clang-format, .cocciconfig.

With this commit, *.diff.gz will only contain the .config and debian/.
The other source files will go into the .orig tarball.

linux.tar.gz is rebuilt only when the source files that would go into
the tarball are changed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

If mprotect_fixup() successfully calls vma_merge() and replaces vma and
the next vma, then the tmp variable in the do_mprotect_pkey() is not
updated to point to the new vma end.  This results in the loop detecting
a gap between VMAs that does not exist.

Fix the faulty value of tmp by setting it to the end location of the vma
iterator at the end of the loop.

Link: https://lkml.kernel.org/r/20230224212055.1786100-1-Liam.Howlett@oracle.com
Fixes: 2286a691 ("mm: change mprotect_fixup to vma iterator")
Link: https://lore.kernel.org/linux-mm/20230223120407.729110a6ecd1416ac59d9cb0@linux-foundation.org/Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Bert Karwatzki <spasswolf@web.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217061Tested-by: Bert Karwatzki <spasswolf@web.de>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/linux-mm/CAHk-=wjFmVL7NiuxL54qLkoabni_yD-oF9=dpDgETtdsiCbhUg@mail.gmail.com/Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull clk updates from Stephen Boyd:
 "We have one small patch to the clk core this time around. It fixes a
  corner case with the CLK_OPS_PARENT_ENABLE flag combined with
  clk_core_is_enabled() where it hangs the system. We'll simply assume
  the clk is disabled if the parent is disabled and the flag is set.
  Trying to turn on the parent to check the enable state of the clk runs
  into system hangs at boot. We let this bake in -next for a couple
  weeks to make sure there aren't any more issues because the last
  attempt to fix this ran into hangs and had to be reverted.

  Note: There were some more patches to the core framework around
  sync_state and disabling unused clks, but I asked for that to be
  reverted from the qcom PR because it isn't ready and we're still
  discussing the best solution on the list.

  Outside of the core clk framework, we have the usual collection of clk
  driver updates and support for new SoCs (which seems to never stop).
  The dirstat is dominated by Qualcomm because they added support for
  quite a few SoCs this time around and also migrated quite a few of
  their drivers to clk_parent_data. The other big diff is in the
  Mediatek clk drivers that saw a significant rework this cycle to
  similarly modernize the code, and we'll see that work continue in the
  next cycle as well. Nothing really jumps out as scary here, except
  that the significant churn in parent data descriptions can have typos
  that go unnoticed. More details below.

  Core:
   - Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()

  New Drivers:
   - Add a new clk-gpr-mux clock type and use it on i.MX6Q to add ENET
     ref clocks
   - Support for Mediatek MT7891 SoC clks
   - Support for many Qualcomm clk controllers:
      - QDU1000/QRU1000 global clock controller
      - SA8775P global clock controller
      - SM8550 TCSR and display clock controller
      - SM6350 clock controller
      - MSM8996 CBF and APCS clock controllers

  Updates:
   - Various cleanups and improvements to Mediatek clk drivers to reduce
     code size and modernize the drivers
   - Support for Versa 5P49V60 clks
   - Disable R-Car H3 ES1.*, as it was only available to an internal
     development group and needed a lot of quirks and workarounds
   - Add PWM, Compare-Match Timer (TIM), USB, SDHI, and eMMC clocks and
     resets on Renesas RZ/V2M
   - Add display clocks on Renesas R-Car V4H
   - Add Camera Receiving Unit (CRU) clocks and resets on Renesas RZ/G2L
   - Free the imx_uart_clocks even if imx_register_uart_clocks returns
     early
   - Get the stdout clocks count from device tree on i.MX
   - Drop the clock count argument from imx_register_uart_clocks()
   - Keep the uart clocks on i.MX93 for when earlycon is used
   - Fix SPDX comment in i.MX6SLL clocks bindings header
   - Drop some unnecessary spaces from i.MX8ULP clocks bindings header
   - Add imx_obtain_fixed_of_clock() for allowing to add a clock that is
     not configured via devicetree
   - Fix the ENET1 gate configuration for i.MX6UL according to the
     reference manual
   - Add ENET refclock mux support for i.MX6UL
   - Add support for USB host/device configuration on Renesas RZ/N1
   - Add PLL2 programming support, and CAN-FD clocks on Renesas R-Car
     V4H
   - Add D1 CAN bus gates and resets for Allwinner
   - Mark D1 CPUX clock as critical on Allwinner
   - Reuse D1 driver for Allwinner R528/T113
   - Cleanup sunxi-ng Kconfig
   - Fix sunxi-ng kernel-doc issues
   - Model Allwinner H3/H5 DRAM clock as fixed clock
   - Use .determine_rate() instead of .round_rate() for the dualdiv,
     mpll, sclk-div and cpu-dyn-div amlogic clock drivers
   - DDR clocks were marked as critical in the proper clock driver for
     each AT91 SoC such that drivers/memory/atmel-sdramc.c to be deleted
     in the next releases as it only does clock enablement
   - Patch to avoid compiling dt-compat.o for all AT91 SoCs as only some
     of them may use it
   - Support synchronous power_off requests in the qcom GDSC driver for
     proper GPU power collapse
   - Drop test clocks from various Qualcomm clk drivers
   - Update parent references to use clk_parent_data/clk_hw in various
     Qualcomm clk drivers
   - Fixes for the Qualcomm MSM8996 CPU clock controller
   - Transition Qualcomm MSM8974 GCC off the externally defined
     sleep_clk
   - Add GDSCs in the global clock controller for Qualcomm QCS404
   - The SDCC core clocks on Qualcomm SM6115 are moved to floor_ops
   - Programming of clk_dis_wait for GPU CX GDSC on Qualcomm SC7180 and
     SDM845 are moved to use the recently introduced properties in the
     GDSC struct
   - Qualcomm's RPMh clock driver gains SM8550 and SA8775P clocks, and
     the IPA clock is added on a variety of platforms
   - De-duplicate identical clks in Qualcomm SMD RPM clk driver
   - Add a few missing clocks across msm8998, msm8992, msm8916, qcs404
     to Qualcomm SDM RPM clk driver
   - Various Qualcomm clk drivers use devm_pm_runtime_enable() to
     simplify"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (228 commits)
  clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP
  clk: qcom: Revert sync_state based clk_disable_unused
  clk: imx: pll14xx: fix recalc_rate for negative kdiv
  clk: rs9: Drop unused pin_xin field
  MAINTAINERS: clk: imx: Add Peng Fan as reviewer
  clk: sprd: Add dependency for SPRD_UMS512_CLK
  clk: ralink: fix 'mt7621_gate_is_enabled()' function
  clk: mediatek: clk-mtk: Remove unneeded semicolon
  dt-bindings: clock: remove stih416 bindings
  dt-bindings: clock: add loongson-2 clock
  dt-bindings: clock: add loongson-2 clock include file
  clk: imx: fix compile testing imxrt1050
  clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
  clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static
  clk: renesas: rcar-gen3: Disable R-Car H3 ES1.*
  dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
  clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC
  clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC
  dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property
  clk: qcom: cpu-8996: add missing cputype include
  ...

Pull mailbox updates from Jassi Brar:

 - qcom: misc changes to bindings for sa8775p, QDU1000/QRU1000, IPQ5332,
   SDX55, msm8976, glink-rpm-edge

 - sti: convert to DT schema

 - zynq: switch to flexible array to simplify code

* tag 'mailbox-v6.3' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  dt-bindings: mailbox: qcom-ipcc: Add compatible for QDU1000/QRU1000
  mailbox: qcom-apcs-ipc: add IPQ5332 APSS clock support
  dt-bindings: mailbox: qcom: add compatible for the IPQ5332 SoC
  dt-bindings: remoteproc: qcom,glink-rpm-edge: convert to DT schema
  mailbox: qcom-apcs-ipc: enable APCS clock device for MSM8996
  dt-bindings: mailbox: qcom: add #clock-cells to msm8996 example
  dt-bindings: mailbox: qcom: add missing platforms to conditional clauses
  dt-bindings: mailbox: qcom: correct the list of platforms using clocks
  dt-bindings: mailbox: qcom: enable syscon compatible for msm8976
  dt-bindings: mailbox: qcom: add SDX55 compatible
  dt-bindings: mailbox: qcom-ipcc: document the sa8775p platform
  dt-bindings: mailbox: sti-mailbox: convert to DT schema
  mailbox: zynq: Switch to flexible array to simplify code

Pull MTD updates from Miquel Raynal:
 "MTD changes:

   - parsers: ofpart: add workaround for #size-cells 0

   - dt-bindings: partitions: Fix partition node name pattern

   - dataflash: remove duplicate SPI ID table

  Raw NAND core changes:

   - Check the data only read pattern only once

   - Prepare the late addition of supported operation checks

   - Support for sequential cache reads

   - Fix nand_chip kdoc

  Raw NAND driver changes:

   - Fsl_elbc: Propagate HW ECC settings to HW

   - Marvell: Add missing layouts

   - Pasemi: Don't use static data to track per-device state

   - Sunxi:
      - Fix the size of the last OOB region
      - Remove an unnecessary check
      - Remove an unnecessary check
      - Clean up chips after failed init
      - Precompute the ECC_CTL register value
      - Embed sunxi_nand_hw_ecc by value
      - Update OOB layout to match hardware

   - tmio_nand: Remove driver

   - vf610_nfc: Use regular comments for functions

  SPI-NAND driver changes:

   - Add support for AllianceMemory AS5F34G04SND

   - Macronix: use scratch buffer for DMA operation

  NAND ECC changes:

   - Mediatek:
      - Add ECC support fot MT7986 IC
      - Add compatible for MT7986
      - dt-bindings: Split ECC engine with rawnand controller

  SPI NOR changes:

   - Misc core fixes

  SPI NOR driver changes:

   - Spansion: Minor fixes"

* tag 'mtd/for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (33 commits)
  mtd: parsers: ofpart: add workaround for #size-cells 0
  mtd: rawnand: sunxi: Precompute the ECC_CTL register value
  mtd: rawnand: sunxi: Embed sunxi_nand_hw_ecc by value
  mtd: rawnand: sunxi: Update OOB layout to match hardware
  mtd: spi-nor: Sort headers alphabetically
  mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type
  mtd: nand: ecc-mtk: Add ECC support fot MT7986 IC
  dt-bindings: mtd: mediatek,nand-ecc-engine: Add compatible for MT7986
  dt-bindings: mtd: Split ECC engine with rawnand controller
  mtd: rawnand: fsl_elbc: Propagate HW ECC settings to HW
  mtd: spinand: Add support for AllianceMemory AS5F34G04SND
  dt-bindings: mtd: partitions: Fix partition node name pattern
  mtd: spi-nor: Create macros to define chip IDs and geometries
  mtd: spi-nor: spansion: Make CFRx reg fields generic
  mtd: spi-nor: spansion: Consider reserved bits in CFR5 register
  mtd: spi-nor: core: fix implicit declaration warning
  mtd: spinand: macronix: use scratch buffer for DMA operation
  mtd: rawnand: Fix nand_chip kdoc
  mtd: rawnand: vf610_nfc: use regular comments for functions
  mtd: rawnand: Support for sequential cache reads
  ...

Pull input updates from Dmitry Torokhov:

 - a set of tweaks to iqs269a touch controller driver

 - a fix for ads7846 driver to properly handle 7845 chip

 - cap11xx driver will support cap1203, cap1293 and cap1298 models

 - xpad driver will support 8BitDo Pro 2 Wired Controller

 - input drivers have been switched to DEFINE_SIMPLE_DEV_PM_OPS() and
   pm_sleep_ptr()

 - other miscellaneous fixes and tweaks

* tag 'input-for-v6.3-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (113 commits)
  dt-bindings: input: iqs626a: Redefine trackpad property types
  Input: iqs626a - drop unused device node references
  dt-bindings: input: touchscreen: st,stmfts: convert to dtschema
  Input: cyttsp5 - fix bitmask for touch buttons
  Input: exc3000 - properly stop timer on shutdown
  Input: synaptics-rmi4 - fix SPI device ID
  Input: cap11xx - add support for cap1203, cap1293 and cap1298
  dt-bindings: input: microchip,cap11xx: add cap1203, cap1293 and cap1298
  Input: pmic8xxx-keypad - fix a Kconfig spelling mistake & hyphenation
  Input: edt-ft5x06 - fix typo in a comment
  Input: tegra-kbc - use devm_platform_get_and_ioremap_resource()
  Input: st-keyscan - use devm_platform_get_and_ioremap_resource()
  Input: spear-keyboard - use devm_platform_get_and_ioremap_resource()
  Input: olpc_apsp - use devm_platform_get_and_ioremap_resource()
  Input: arc_ps2 - use devm_platform_get_and_ioremap_resource()
  Input: apbps2 - use devm_platform_get_and_ioremap_resource()
  Input: altera_ps2 - use devm_platform_get_and_ioremap_resource()
  Input: ads7846 - don't check penirq immediately for 7845
  Input: ads7846 - always set last command to PWRDOWN
  Input: ads7846 - don't report pressure for ads7845
  ...

Pull kprobes cleanup updates from Masami Hiramatsu:
 "These are probe events cleanups, no new features but improve
  readability:

   - Rename print_probe_args() to trace_probe_print_args() and
     un-inline it

   - Introduce a set of default data fetch functions for dynamic
     probe events

   - Extract common code of data fetch process of dynamic probe events"

* tag 'probes-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  kernel/trace: extract common part in process_fetch_insn
  kernel/trace: Provide default impelentations defined in trace_probe_tmpl.h
  kernel/trace: Introduce trace_probe_print_args and use it in *probes

Pull kernel concurrency sanitizer (KCSAN) updates from Paul McKenney:
 "This fixes gcc-11 errors for x86_64 KCSAN-enabled kernel builds by
  selecting the CONSTRUCTORS Kconfig option"

* tag 'kcsan.2023.02.24a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  kcsan: select CONFIG_CONSTRUCTORS

Merge tag 'flex-array-transformations-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull flexible-array updates from Gustavo Silva:
 "Transform zero-length arrays, in unions, into flexible arrays"

* tag 'flex-array-transformations-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  bcache: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper
  mm/memremap: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
  exportfs: Replace zero-length array with DECLARE_FLEX_ARRAY() helper

Pull alpha updates from Al Viro:
 "Mostly small janitorial fixes but there's also more important ones: a
  patch to fix loading large modules from Edward Humes, and some fixes
  from Al Viro"

[ The fixes from Al mostly came in separately through Al's trees too and
  are now duplicated..   - Linus ]

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
  alpha: in_irq() cleanup
  alpha: lazy FPU switching
  alpha/boot/misc: trim unused declarations
  alpha/boot/tools/objstrip: fix the check for ELF header
  alpha/boot: fix the breakage from -isystem series...
  alpha: fix FEN fault handling
  alpha: Avoid comma separated statements
  alpha: fixed a typo in core_cia.c
  alpha: remove unused __SLOW_DOWN_IO and SLOW_DOWN_IO definitions
  alpha: update config files
  alpha: fix R_ALPHA_LITERAL reloc for large modules
  alpha: Add some spaces to ensure format specification
  alpha: replace NR_SYSCALLS by NR_syscalls
  alpha: Remove redundant local asm header redirections
  alpha: Implement "current_stack_pointer"
  alpha: remove redundant err variable
  alpha: osf_sys: reduce kernel log spamming on invalid osf_mount call typenr

Pull VFIO updates from Alex Williamson:

 - Remove redundant resource check in vfio-platform (Angus Chen)

 - Use GFP_KERNEL_ACCOUNT for persistent userspace allocations, allowing
   removal of arbitrary kernel limits in favor of cgroup control (Yishai
   Hadas)

 - mdev tidy-ups, including removing the module-only build restriction
   for sample drivers, Kconfig changes to select mdev support,
   documentation movement to keep sample driver usage instructions with
   sample drivers rather than with API docs, remove references to
   out-of-tree drivers in docs (Christoph Hellwig)

 - Fix collateral breakages from mdev Kconfig changes (Arnd Bergmann)

 - Make mlx5 migration support match device support, improve source and
   target flows to improve pre-copy support and reduce downtime (Yishai
   Hadas)

 - Convert additional mdev sysfs case to use sysfs_emit() (Bo Liu)

 - Resolve copy-paste error in mdev mbochs sample driver Kconfig (Ye
   Xingchen)

 - Avoid propagating missing reset error in vfio-platform if reset
   requirement is relaxed by module option (Tomasz Duszynski)

 - Range size fixes in mlx5 variant driver for missed last byte and
   stricter range calculation (Yishai Hadas)

 - Fixes to suspended vaddr support and locked_vm accounting, excluding
   mdev configurations from the former due to potential to indefinitely
   block kernel threads, fix underflow and restore locked_vm on new mm
   (Steve Sistare)

 - Update outdated vfio documentation due to new IOMMUFD interfaces in
   recent kernels (Yi Liu)

 - Resolve deadlock between group_lock and kvm_lock, finally (Matthew
   Rosato)

 - Fix NULL pointer in group initialization error path with IOMMUFD (Yan
   Zhao)

* tag 'vfio-v6.3-rc1' of https://github.com/awilliam/linux-vfio: (32 commits)
  vfio: Fix NULL pointer dereference caused by uninitialized group->iommufd
  docs: vfio: Update vfio.rst per latest interfaces
  vfio: Update the kdoc for vfio_device_ops
  vfio/mlx5: Fix range size calculation upon tracker creation
  vfio: no need to pass kvm pointer during device open
  vfio: fix deadlock between group lock and kvm lock
  vfio: revert "iommu driver notify callback"
  vfio/type1: revert "implement notify callback"
  vfio/type1: revert "block on invalid vaddr"
  vfio/type1: restore locked_vm
  vfio/type1: track locked_vm per dma
  vfio/type1: prevent underflow of locked_vm via exec()
  vfio/type1: exclude mdevs from VFIO_UPDATE_VADDR
  vfio: platform: ignore missing reset if disabled at module init
  vfio/mlx5: Improve the target side flow to reduce downtime
  vfio/mlx5: Improve the source side flow upon pre_copy
  vfio/mlx5: Check whether VF is migratable
  samples: fix the prompt about SAMPLE_VFIO_MDEV_MBOCHS
  vfio/mdev: Use sysfs_emit() to instead of sprintf()
  vfio-mdev: add back CONFIG_VFIO dependency
  ...

Pull virtio updates from Michael Tsirkin:

 - device feature provisioning in ifcvf, mlx5

 - new SolidNET driver

 - support for zoned block device in virtio blk

 - numa support in virtio pmem

 - VIRTIO_F_RING_RESET support in vhost-net

 - more debugfs entries in mlx5

 - resume support in vdpa

 - completion batching in virtio blk

 - cleanup of dma api use in vdpa

 - now simulating more features in vdpa-sim

 - documentation, features, fixes all over the place

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (64 commits)
  vdpa/mlx5: support device features provisioning
  vdpa/mlx5: make MTU/STATUS presence conditional on feature bits
  vdpa: validate device feature provisioning against supported class
  vdpa: validate provisioned device features against specified attribute
  vdpa: conditionally read STATUS in config space
  vdpa: fix improper error message when adding vdpa dev
  vdpa/mlx5: Initialize CVQ iotlb spinlock
  vdpa/mlx5: Don't clear mr struct on destroy MR
  vdpa/mlx5: Directly assign memory key
  tools/virtio: enable to build with retpoline
  vringh: fix a typo in comments for vringh_kiov
  vhost-vdpa: print warning when vhost_vdpa_alloc_domain fails
  scsi: virtio_scsi: fix handling of kmalloc failure
  vdpa: Fix a couple of spelling mistakes in some messages
  vhost-net: support VIRTIO_F_RING_RESET
  vhost-scsi: convert sysfs snprintf and sprintf to sysfs_emit
  vdpa: mlx5: support per virtqueue dma device
  vdpa: set dma mask for vDPA device
  virtio-vdpa: support per vq dma device
  vdpa: introduce get_vq_dma_device()
  ...

Pull kvm updates from Paolo Bonzini:
 "ARM:

   - Provide a virtual cache topology to the guest to avoid
     inconsistencies with migration on heterogenous systems. Non secure
     software has no practical need to traverse the caches by set/way in
     the first place

   - Add support for taking stage-2 access faults in parallel. This was
     an accidental omission in the original parallel faults
     implementation, but should provide a marginal improvement to
     machines w/o FEAT_HAFDBS (such as hardware from the fruit company)

   - A preamble to adding support for nested virtualization to KVM,
     including vEL2 register state, rudimentary nested exception
     handling and masking unsupported features for nested guests

   - Fixes to the PSCI relay that avoid an unexpected host SVE trap when
     resuming a CPU when running pKVM

   - VGIC maintenance interrupt support for the AIC

   - Improvements to the arch timer emulation, primarily aimed at
     reducing the trap overhead of running nested

   - Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
     interest of CI systems

   - Avoid VM-wide stop-the-world operations when a vCPU accesses its
     own redistributor

   - Serialize when toggling CPACR_EL1.SMEN to avoid unexpected
     exceptions in the host

   - Aesthetic and comment/kerneldoc fixes

   - Drop the vestiges of the old Columbia mailing list and add [Oliver]
     as co-maintainer

  RISC-V:

   - Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE

   - Correctly place the guest in S-mode after redirecting a trap to the
     guest

   - Redirect illegal instruction traps to guest

   - SBI PMU support for guest

  s390:

   - Sort out confusion between virtual and physical addresses, which
     currently are the same on s390

   - A new ioctl that performs cmpxchg on guest memory

   - A few fixes

  x86:

   - Change tdp_mmu to a read-only parameter

   - Separate TDP and shadow MMU page fault paths

   - Enable Hyper-V invariant TSC control

   - Fix a variety of APICv and AVIC bugs, some of them real-world, some
     of them affecting architecurally legal but unlikely to happen in
     practice

   - Mark APIC timer as expired if its in one-shot mode and the count
     underflows while the vCPU task was being migrated

   - Advertise support for Intel's new fast REP string features

   - Fix a double-shootdown issue in the emergency reboot code

   - Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give
     SVM similar treatment to VMX

   - Update Xen's TSC info CPUID sub-leaves as appropriate

   - Add support for Hyper-V's extended hypercalls, where "support" at
     this point is just forwarding the hypercalls to userspace

   - Clean up the kvm->lock vs. kvm->srcu sequences when updating the
     PMU and MSR filters

   - One-off fixes and cleanups

   - Fix and cleanup the range-based TLB flushing code, used when KVM is
     running on Hyper-V

   - Add support for filtering PMU events using a mask. If userspace
     wants to restrict heavily what events the guest can use, it can now
     do so without needing an absurd number of filter entries

   - Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
     support is disabled

   - Add PEBS support for Intel Sapphire Rapids

   - Fix a mostly benign overflow bug in SEV's
     send|receive_update_data()

   - Move several SVM-specific flags into vcpu_svm

  x86 Intel:

   - Handle NMI VM-Exits before leaving the noinstr region

   - A few trivial cleanups in the VM-Enter flows

   - Stop enabling VMFUNC for L1 purely to document that KVM doesn't
     support EPTP switching (or any other VM function) for L1

   - Fix a crash when using eVMCS's enlighted MSR bitmaps

  Generic:

   - Clean up the hardware enable and initialization flow, which was
     scattered around multiple arch-specific hooks. Instead, just let
     the arch code call into generic code. Both x86 and ARM should
     benefit from not having to fight common KVM code's notion of how to
     do initialization

   - Account allocations in generic kvm_arch_alloc_vm()

   - Fix a memory leak if coalesced MMIO unregistration fails

  selftests:

   - On x86, cache the CPU vendor (AMD vs. Intel) and use the info to
     emit the correct hypercall instruction instead of relying on KVM to
     patch in VMMCALL

   - Use TAP interface for kvm_binary_stats_test and tsc_msrs_test"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits)
  KVM: SVM: hyper-v: placate modpost section mismatch error
  KVM: x86/mmu: Make tdp_mmu_allowed static
  KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID
  KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes
  KVM: arm64: nv: Filter out unsupported features from ID regs
  KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2
  KVM: arm64: nv: Allow a sysreg to be hidden from userspace only
  KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor
  KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2
  KVM: arm64: nv: Handle SMCs taken from virtual EL2
  KVM: arm64: nv: Handle trapped ERET from virtual EL2
  KVM: arm64: nv: Inject HVC exceptions to the virtual EL2
  KVM: arm64: nv: Support virtual EL2 exceptions
  KVM: arm64: nv: Handle HCR_EL2.NV system register traps
  KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state
  KVM: arm64: nv: Add EL2 system registers to vcpu context
  KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x
  KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set
  KVM: arm64: nv: Introduce nested virtualization VCPU feature
  KVM: arm64: Use the S2 MMU context to iterate over S2 table
  ...

Pull RISC-V updates from Palmer Dabbelt:
 "There's a bunch of fixes/cleanups throughout the tree as usual, but we
  also have a handful of new features:

   - Various improvements to the extension detection and alternative
     patching infrastructure

   - Zbb-optimized string routines

   - Support for cpu-capacity in the RISC-V DT bindings

   - Zicbom no longer depends on toolchain support

   - Some performance and code size improvements to ftrace

   - Support for ARCH_WANT_LD_ORPHAN_WARN

   - Oops now contain the faulting instruction"

* tag 'riscv-for-linus-6.3-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (67 commits)
  RISC-V: add a spin_shadow_stack declaration
  riscv: mm: hugetlb: Enable ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
  riscv: Add header include guards to insn.h
  riscv: alternative: proceed one more instruction for auipc/jalr pair
  riscv: Avoid enabling interrupts in die()
  riscv, mm: Perform BPF exhandler fixup on page fault
  RISC-V: take text_mutex during alternative patching
  riscv: hwcap: Don't alphabetize ISA extension IDs
  RISC-V: fix ordering of Zbb extension
  riscv: jump_label: Fixup unaligned arch_static_branch function
  RISC-V: Only provide the single-letter extensions in HWCAP
  riscv: mm: fix regression due to update_mmu_cache change
  scripts/decodecode: Add support for RISC-V
  riscv: Add instruction dump to RISC-V splats
  riscv: select ARCH_WANT_LD_ORPHAN_WARN for !XIP_KERNEL
  riscv: vmlinux.lds.S: explicitly catch .init.bss sections from EFI stub
  riscv: vmlinux.lds.S: explicitly catch .riscv.attributes sections
  riscv: vmlinux.lds.S: explicitly catch .rela.dyn symbols
  riscv: lds: define RUNTIME_DISCARD_EXIT
  RISC-V: move some stray __RISCV_INSN_FUNCS definitions from kprobes
  ...

Pull powerpc updates from Michael Ellerman:

 - Support for configuring secure boot with user-defined keys on PowerVM
   LPARs

 - Simplify the replay of soft-masked IRQs by making it non-recursive

 - Add support for KCSAN on 64-bit Book3S

 - Improvements to the API & code which interacts with RTAS (pseries
   firmware)

 - Change 32-bit powermac to assign PCI bus numbers per domain by
   default

 - Some improvements to the 32-bit BPF JIT

 - Various other small features and fixes

Thanks to Anders Roxell, Andrew Donnellan, Andrew Jeffery, Benjamin
Gray, Christophe Leroy, Frederic Barrat, Ganesh Goudar, Geoff Levand,
Greg Kroah-Hartman, Jan-Benedict Glaw, Josh Poimboeuf, Kajol Jain,
Laurent Dufour, Mahesh Salgaonkar, Mathieu Desnoyers, Mimi Zohar, Murphy
Zhou, Nathan Chancellor, Nathan Lynch, Nayna Jain, Nicholas Piggin, Pali
Rohár, Petr Mladek, Rohan McLure, Russell Currey, Sachin Sant, Sathvika
Vasireddy, Sourabh Jain, Stefan Berger, Stephen Rothwell, and Sudhakar
Kuppusamy.

* tag 'powerpc-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (114 commits)
  powerpc/pseries: Avoid hcall in plpks_is_available() on non-pseries
  powerpc: dts: turris1x.dts: Set lower priority for CPLD syscon-reboot
  powerpc/e500: Add missing prototype for 'relocate_init'
  powerpc/64: Fix unannotated intra-function call warning
  powerpc/epapr: Don't use wrteei on non booke
  powerpc: Pass correct CPU reference to assembler
  powerpc/mm: Rearrange if-else block to avoid clang warning
  powerpc/nohash: Fix build with llvm-as
  powerpc/nohash: Fix build error with binutils >= 2.38
  powerpc/pseries: Fix endianness issue when parsing PLPKS secvar flags
  macintosh: windfarm: Use unsigned type for 1-bit bitfields
  powerpc/kexec_file: print error string on usable memory property update failure
  powerpc/machdep: warn when machine_is() used too early
  powerpc/64: Replace -mcpu=e500mc64 by -mcpu=e5500
  powerpc/eeh: Set channel state after notifying the drivers
  selftests/powerpc: Fix incorrect kernel headers search path
  powerpc/rtas: arch-wide function token lookup conversions
  powerpc/rtas: introduce rtas_function_token() API
  powerpc/pseries/lpar: convert to papr_sysparm API
  powerpc/pseries/hv-24x7: convert to papr_sysparm API
  ...