This patch enables and process hw errors from the
PPP(Programmable Packet Process) block.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds enable and processing of hw errors from IGU(Ingress Unit),
EGU(Egress Unit) and NCSI(Network Controller Sideband Interface).
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds enable and processing of ecc errors from
common HNS blocks, CMDQ(Command Queue),
IMP(Integrated Management Processor) and TQP(Task Queue Pair).
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds functions to enable and disable hw errors.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the error recovery for the HNS hw errors.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set of hw errors occurred in the HNS3 are reported to the
hns3 driver through PCIe AER and RAS.The error info will be
processed and appropriately recovered.
This patch adds error_detected callback and error processing.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Clang warns (trimmed for brevity):

drivers/isdn/mISDN/tei.c:1193:7: warning: overflow converting case value
to switch condition type (2147764552 to 18446744071562348872) [-Wswitch]
        case IMHOLD_L1:
             ^
drivers/isdn/mISDN/tei.c:1187:7: warning: overflow converting case value
to switch condition type (2147764550 to 18446744071562348870) [-Wswitch]
        case IMCLEAR_L2:
             ^
2 warnings generated.

The root cause is that the _IOC macro can generate really large numbers,
which don't find into type int. My research into how GCC and Clang are
handling this at a low level didn't prove fruitful and surveying the
kernel tree shows that aside from here and a few places in the scsi
subsystem, everything that uses _IOC is at least of type 'unsigned int'.
Make that change here because as nothing in this function cares about
the signedness of the variable and it removes ambiguity, which is never
good when dealing with compilers.

While we're here, remove the unnecessary local variable ret (just return
-EINVAL and 0 directly).

Link: https://github.com/ClangBuiltLinux/linux/issues/67Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We have seen the following race scenario:
1) named_distribute() builds a "bulk" message, containing a PUBLISH
   item for a certain publication. This is based on the contents of
   the binding tables's 'cluster_scope' list.
2) tipc_named_withdraw() removes the same publication from the list,
   bulds a WITHDRAW message and distributes it to all cluster nodes.
3) tipc_named_node_up(), which was calling named_distribute(), sends
   out the bulk message built under 1)
4) The WITHDRAW message arrives at the just detected node, finds
   no corresponding publication, and is dropped.
5) The PUBLISH item arrives at the same node, is added to its binding
   table, and remains there forever.

This arrival disordering was earlier taken care of by the backlog queue,
originally added for a different purpose, which was removed in the
commit referred to below, but we now need a different solution.
In this commit, we replace the rcu lock protecting the 'cluster_scope'
list with a regular RW lock which comprises even the sending of the
bulk message. This both guarantees both the list integrity and the
message sending order. We will later add a commit which cleans up
this code further.

Note that this commit needs recently added commit d3092b2e ("tipc:
fix unsafe rcu locking when accessing publication list") to apply
cleanly.

Fixes: 37922ea4 ("tipc: permit overlapping service ranges in name table")
Reported-by: Tuong Lien Tong <tuong.t.lien@dektech.com.au>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/ethernet/marvell/octeontx2/af/rvu.c: In function 'rvu_detach_rsrcs':
drivers/net/ethernet/marvell/octeontx2/af/rvu.c:855:6: warning:
 variable 'devnum' set but not used [-Wunused-but-set-variable]

drivers/net/ethernet/marvell/octeontx2/af/rvu.c:853:7: warning:
 variable 'is_pf' set but not used [-Wunused-but-set-variable]

drivers/net/ethernet/marvell/octeontx2/af/rvu.c: In function 'rvu_mbox_handler_ATTACH_RESOURCES':
drivers/net/ethernet/marvell/octeontx2/af/rvu.c:1054:7: warning:
 variable 'is_pf' set but not used [-Wunused-but-set-variable]

drivers/net/ethernet/marvell/octeontx2/af/rvu.c:1053:6: warning:
 variable 'devnum' set but not used [-Wunused-but-set-variable]

It never used since introduction in commit
746ea742 ("octeontx2-af: Add RVU block LF provisioning support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/ethernet/marvell/octeontx2/af/rvu_npa.c: In function 'rvu_npa_init':
drivers/net/ethernet/marvell/octeontx2/af/rvu_npa.c:446:20: warning:
 variable 'block' set but not used [-Wunused-but-set-variable]

It never used since introduction in
commit 7a37245e ("octeontx2-af: NPA block admin queue init")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Gustavo A. R. Silva says:

====================
phy: ocelot-serdes: fix out-of-bounds read

This patchset aims to fix an out-of-bounds bug in
the phy-ocelot-serdes driver.

Currently, there is an out-of-bounds read on array ctrl->phys,
once variable i reaches the maximum array size of SERDES_MAX
in the for loop.

Quentin Schulz pointed out that SERDES_MAX is a valid value to
index ctrl->phys. So, I updated SERDES_MAX to be SERDES6G_MAX + 1
in include/dt-bindings/phy/phy-ocelot-serdes.h.

Then I changed the condition in the for loop from
i <= SERDES_MAX to i < SERDES_MAX in order to
complete the fix.

The reason I'm sending this fix as series is because
checkpatch reported an error when I first tried to
integrate the whole solution into a singe patch. So,
changes to dt-bindings should be sent as a separate
patch.

Changes in v3:
 - Post the series to netdev, so Dave can take it.

Changes in v2:
 - Send the whole series to Kishon Vijay Abraham I, so it
   can be taken into the PHY tree.
 - Add Quentin's Reviewed-by to commit log in both patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, there is an out-of-bounds read on array ctrl->phys,
once variable i reaches the maximum array size of SERDES_MAX
in the for loop.

Fix this by changing the condition in the for loop from
i <= SERDES_MAX to i < SERDES_MAX.

Addresses-Coverity-ID: 1473966 ("Out-of-bounds read")
Addresses-Coverity-ID: 1473959 ("Out-of-bounds read")
Fixes: 51f6b410 ("phy: add driver for Microsemi Ocelot SerDes muxing")
Reviewed-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SERDES_MAX is a valid value to index ctrl->phys in
drivers/phy/mscc/phy-ocelot-serdes.c. But, currently,
there is an out-of-bounds bug in the mentioned driver
when reading from ctrl->phys, because the size of
array ctrl->phys is SERDES_MAX.

Partially fix this by updating SERDES_MAX to be SERDES6G_MAX + 1.

Notice that this is the first part of the solution to
the out-of-bounds bug mentioned above. Although this
change is not dependent on any other one.
Suggested-by: Quentin Schulz <quentin.schulz@bootlin.com>
Reviewed-by: Quentin Schulz <quentin.schulz@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Got below warning with gcc 8.2 compiler.

net/tipc/topsrv.c: In function ‘tipc_topsrv_start’:
net/tipc/topsrv.c:660:2: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=]
  strncpy(srv->name, name, strlen(name) + 1);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/tipc/topsrv.c:660:27: note: length computed here
  strncpy(srv->name, name, strlen(name) + 1);
                           ^~~~~~~~~~~~
So change it to correct length and use strscpy.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Clang warns:

drivers/isdn/hisax/hfc_pci.c:131:34: error: if statement has empty body
[-Werror,-Wempty-body]
        if (Read_hfc(cs, HFCPCI_INT_S1));
                                        ^
drivers/isdn/hisax/hfc_pci.c:131:34: note: put the semicolon on a
separate line to silence this warning

In my attempt to hide the warnings because I thought they didn't serve
any purpose[1], Masahiro Yamada pointed out that {Read,Write}_hfc in
hci_pci.c should be using a standard register access method; otherwise,
the compiler will just remove the if statements.

For hfc_pci, use the versions of {Read,Write}_hfc found in
drivers/isdn/hardware/mISDN/hfc_pCI.h while converting pci_io to be
'void __iomem *' (and clean up ioremap) then remove the empty if
statements.

For hfc_sx, {Read,Write}_hfc are already use a proper register accessor
(inb, outb) so just remove the unnecessary if statements.

[1]: https://lore.kernel.org/lkml/20181016021454.11953-1-natechancellor@gmail.com/

Link: https://github.com/ClangBuiltLinux/linux/issues/66Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-10-21

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Implement two new kind of BPF maps, that is, queue and stack
   map along with new peek, push and pop operations, from Mauricio.

2) Add support for MSG_PEEK flag when redirecting into an ingress
   psock sk_msg queue, and add a new helper bpf_msg_push_data() for
   insert data into the message, from John.

3) Allow for BPF programs of type BPF_PROG_TYPE_CGROUP_SKB to use
   direct packet access for __skb_buff, from Song.

4) Use more lightweight barriers for walking perf ring buffer for
   libbpf and perf tool as well. Also, various fixes and improvements
   from verifier side, from Daniel.

5) Add per-symbol visibility for DSO in libbpf and hide by default
   global symbols such as netlink related functions, from Andrey.

6) Two improvements to nfp's BPF offload to check vNIC capabilities
   in case prog is shared with multiple vNICs and to protect against
   mis-initializing atomic counters, from Jakub.

7) Fix for bpftool to use 4 context mode for the nfp disassembler,
   also from Jakub.

8) Fix a return value comparison in test_libbpf.sh and add several
   bpftool improvements in bash completion, documentation of bpf fs
   restrictions and batch mode summary print, from Quentin.

9) Fix a file resource leak in BPF selftest's load_kallsyms()
   helper, from Peng.

10) Fix an unused variable warning in map_lookup_and_delete_elem(),
    from Alexei.

11) Fix bpf_skb_adjust_room() signature in BPF UAPI helper doc,
    from Nicolas.

12) Add missing executables to .gitignore in BPF selftests, from Anders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Wolfram Sang says:

====================
net: simplify getting .driver_data

I got tired of fixing this in Renesas drivers manually, so I took the big
hammer. Remove this cumbersome code pattern which got copy-pasted too much
already:

-	struct platform_device *pdev = to_platform_device(dev);
-	struct ep93xx_keypad *keypad = platform_get_drvdata(pdev);
+	struct ep93xx_keypad *keypad = dev_get_drvdata(dev);

A branch, tested by buildbot, can be found here:

git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git coccinelle/get_drvdata

I have been asked if it couldn't be done for dev_set_drvdata as well. I checked
it and did not find one occasion where it could be simplified like this. Not
much of a surprise because driver_data is usually set in probe() functions
which access struct platform_device in many other ways.

I am open for other comments, suggestions, too, of course.

Here is the cocci-script I created:

@@
struct device* d;
identifier pdev;
expression *ptr;
@@
(
-	struct platform_device *pdev = to_platform_device(d);
|
-	struct platform_device *pdev;
	...
-	pdev = to_platform_device(d);
)
	<... when != pdev
-	&pdev->dev
+	d
	...>

	ptr =
-	platform_get_drvdata(pdev)
+	dev_get_drvdata(d)

	<... when != pdev
-	&pdev->dev
+	d
	...>
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Ahern's dump indexing bug fix in 'net' overlapped the
change of the function signature of inet6_fill_ifaddr() in
'net-next'.  Trivially resolved.
Signed-off-by: David S. Miller <davem@davemloft.net>

When trying to complete "bpftool map update" commands, the call to
printf would print an error message that would show on the command line
if no map is found to complete the command line.

Fix it by making sure we have map ids to complete the line with, before
we try to print something.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

When batch mode is used and all commands succeeds, bpftool prints the
number of commands processed to stderr. There is no particular reason to
use stderr for this, we could as well use stdout. It would avoid getting
unnecessary output on stderr if the standard ouptut is redirected, for
example.
Reported-by: David Beckett <david.beckett@netronome.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Names used to pin eBPF programs and maps under the eBPF virtual file
system cannot contain a dot character, which is reserved for future
extensions of this file system.

Document this in bpftool man pages to avoid users getting confused if
pinning fails because of a dot.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

David writes:
  "Networking:

   A few straggler bug fixes:

   1) Fix indexing of multi-pass dumps of ipv6 addresses, from David
      Ahern.

   2) Revert RCU locking change for bonding netpoll, causes worse
      problems than it solves.

   3) pskb_trim_rcsum_slow() doesn't handle odd trim offsets, resulting
      in erroneous bad hw checksum triggers with CHECKSUM_COMPLETE
      devices.  From Dimitris Michailidis.

   4) a revert to some neighbour code changes that adjust notifications
      in a way that confuses some apps."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  Revert "neighbour: force neigh_invalidate when NUD_FAILED update is from admin"
  net/ipv6: Fix index counter for unicast addresses in in6_dump_addrs
  net: fix pskb_trim_rcsum_slow() with odd trim offset
  Revert "bond: take rcu lock in netpoll_send_skb_on_dev"

The return value for each test in test_libbpf.sh is compared with

    if (( $? == 0 )) ; then ...

This works well with bash, but not with dash, that /bin/sh is aliased to
on some systems (such as Ubuntu).

Let's replace this comparison by something that works on both shells.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Daniel Borkmann says:

====================
Last batch of misc patches I had in queue: first one removes some left-over
bits from ULP, second is a fix in the verifier where we wrongly use register
number as type to fetch the string for the dump, third disables xadd on flow
keys and subsequent one removes the flow key type from check_helper_mem_access()
as they cannot be passed into any helper as of today. Next one lets map push,
pop, peek avoid having to go through retpoline, and last one has a couple of
minor fixes and cleanups for the ring buffer walk.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Simplify bpf_perf_event_read_simple() a bit and fix up some minor
things along the way: the return code in the header is not of type
int but enum bpf_perf_event_ret instead. Once callback indicated
to break the loop walking event data, it also needs to be consumed
in data_tail since it has been processed already.

Moreover, bpf_perf_event_print_t callback should avoid void * as
we actually get a pointer to struct perf_event_header and thus
applications can make use of container_of() to have type checks.
The walk also doesn't have to use modulo op since the ring size is
required to be power of two.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Extend prior work from 09772d92 ("bpf: avoid retpoline for
lookup/update/delete calls on maps") to also apply to the recently
added map helpers that perform push/pop/peek operations so that
the indirect call can be avoided.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

They PTR_TO_FLOW_KEYS is not used today to be passed into a helper
as memory, so it can be removed from check_helper_mem_access().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

We should not enable xadd operation for flow key memory if not
needed there anyway. There is no such issue as described in the
commit f37a8cb8 ("bpf: reject stores into ctx via st and xadd")
since there's no context rewriter for flow keys today, but it
also shouldn't become part of the user facing behavior to allow
for it. After patch:

  0: (79) r7 = *(u64 *)(r1 +144)
  1: (b7) r3 = 4096
  2: (db) lock *(u64 *)(r7 +0) += r3
  BPF_XADD stores into R7 flow_keys is not allowed
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Using reg_type_str[insn->dst_reg] is incorrect since insn->dst_reg
contains the register number but not the actual register type. Add
a small reg_state() helper and use it to get to the type. Also fix
up the test_verifier test cases that have an incorrect errstr.

Fixes: 9d2be44a ("bpf: Reuse canonical string formatter for ctx errs")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

They are not used anymore and therefore should be removed.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This reverts commit 8e326289.

This patch results in unnecessary netlink notification when one
tries to delete a neigh entry already in NUD_FAILED state. Found
this with a buggy app that tries to delete a NUD_FAILED entry
repeatedly. While the notification issue can be fixed with more
checks, adding more complexity here seems unnecessary. Also,
recent tests with other changes in the neighbour code have
shown that the INCOMPLETE and PROBE checks are good enough for
the original issue.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>