The 512B buffer sector_buf field of struct ata_port is used for scanning
devices as well as during error recovery with ata EH. This buffer is
thus useless if a port does not have a device connected to it.
And also given that commands using this buffer are issued to devices,
and not to ports, move this buffer definition from struct ata_port to
struct ata_device.

This change slightly increases system memory usage for systems using a
port-multiplier as in that case we do not need a per-device buffer for
scanning devices (PMP does not allow parallel scanning) nor for EH (as
when entering EH we are guaranteed that all commands to all devices
connected to the PMP have completed or have been aborted). However,
this change reduces memory usage on systems that have many ports with
only few devices rives connected, which is a much more common use case
than the PMP use case.
Suggested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>

The function ata_eh_read_sense_success_ncq_log() does more that just
reading the sense data for successful NCQ commands log page as it also
sets the sense data for all commands listed in the log page.

Rename this function to ata_eh_get_ncq_success_sense() to better
describe what the function does. Furthermore, since this function is
only called from ata_eh_get_success_sense() in libata-eh.c, there is no
need to export it and its declaration can be moved to
drivers/ata/libata.h.

To be consistent with this change, the function
ata_eh_read_sense_success_non_ncq() is also renamed to
ata_eh_get_non_ncq_success_sense().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>

Unlike ata_std_prereset() and ata_std_postreset(), the function
sata_std_hardreset() applies only to SATA devices, as its name implies.
So move its definition to libata-sata.c.

Together with this, also move the definition of sata_port_ops to
libata-sata.c, where it belongs.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>

Move the definition of the function sata_down_spd_limit() to
libata-sata.c where it belongs, together with sata_set_spd().
The helper function ata_sstatus_online() is also changed to be an
inline function defined in drivers/ata/libata.h.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>

The function __ata_qc_complete() is always called with a qc that already
has been dereferenced and so is guaranteed to be non-NULL (as otherwise
the kernel would have crashed). So remove the warning for a NULL qc as
it is useless.

Furthermore, the qc passed to __ata_qc_complete() must always be marked
as active with the ATA_QCFLAG_ACTIVE flag. If that is not the case, in
addition to the existing warning, return early so that we do not attempt
to complete an invalid qc.

Finally, fix the comment related to clearing the qc active flag as that
operation applies to all devices, not just ATAPI ones.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>

A struct ata_device flags should always be set and cleared with the
device port locked. Testing for a flag should thus also be done while
holding the device port lock. In accordance to this principle, modify
ata_scsi_handle_link_detach() to test and clear the ATA_DFLAG_DETACHED
flag while holding the device port lock.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>

Move the ATA link transport device related functions after the ATA
transport device related functions to avoid the need for forward
declaring ata_tdev_add() and ata_tdev_delete().

And while at it, do the following:
1) Change ata_is_ata_dev() and ata_is_link() to return a boolean
2) Fix a pointer declaration style in ata_is_ata_dev()
3) Improve the kdoc comments for ata_tdev_free(), ata_tdev_delete(),
   ata_tdev_add(), ata_tlink_delete() and ata_tlink_add()

No functional changes are introduced by this cleanup.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>

Add MODULE_DEVICE_TABLE(), so modules can be properly autoloaded based
on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>

Add MODULE_DEVICE_TABLE(), so modules can be properly autoloaded based
on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>

Add MODULE_DEVICE_TABLE(), so modules can be properly autoloaded based
on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>

Every time I see libata code calling scsi_check_sense(), I get confused
why the code path that is working fine for SCSI code, is not sufficient
for libata code.

The reason is that SCSI usually gets the sense data as part of the
completion, and will thus automatically call scsi_check_sense(), which
will set the SCSI ML byte (if any).

However, for libata queued commands, we always need to fetch the sense
data via SCSI EH, and thus do not get the luxury of having
scsi_check_sense() called automatically.

Add a new helper, ata_eh_decide_disposition(), that has a ata_eh_ prefix
to more clearly highlight that this is only needed for code called by EH,
while also having a similar name to scsi_decide_disposition(), such that
it is easier to compare the libata code with the equivalent SCSI code.

Also add a big kdoc comment explaining why this helper is called/needed in
the first place.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>

platform_get_resource_byname() and devm_ioremap_resource() can be
replaced by devm_platform_ioremap_resource_byname(), which can
simplify the code logic a bit, No functional change here.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>

The function ata_schedule_scsi_eh() was removed with commit
f8bbfc24 ("[PATCH] SCSI: make scsi_implement_eh() generic API for
SCSI transports"), and the function ata_sff_irq_clear() was removed
with commit 37f65b8b("libata-sff: ata_sff_irq_clear() is BMDMA
specific").

Remove the now useless declarations of these functions in
drivers/ata/libata.h and include/linux/libata.h.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>

Return a negative error code if devm_clk_get() fails.  Don't return
success.

Fixes: 3156e1b2 ("ata: ahci_imx: AHB clock rate setting is not required on i.MX8QM AHCI SATA")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/cbcbdfc2-ddc7-4684-8ad4-018227823546@stanley.mountainSigned-off-by: Niklas Cassel <cassel@kernel.org>

for_each_child_of_node_scoped() can put the device_node automatically.
So let's use it to make the code simpler by avoiding the need to
explicitly call of_node_put().
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240810023426.110624-1-zhangzekun11@huawei.comSigned-off-by: Niklas Cassel <cassel@kernel.org>

Correct the email address of driver author.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/1723428055-27021-6-git-send-email-hongxing.zhu@nxp.comSigned-off-by: Niklas Cassel <cassel@kernel.org>

The RXWM(RxWaterMark) sets the minimum number of free location within
the RX FIFO before the watermark is exceeded which in turn will cause
the Transport Layer to instruct the Link Layer to transmit HOLDS to the
transmitting end.

Based on the default RXWM value 0x20, RX FIFO overflow might be observed
on i.MX8QM MEK board, when some Gen3 SATA disks are used.

The FIFO overflow will result in CRC error, internal error and protocol
error, then the SATA link is not stable anymore.

To fix this issue, enlarge RX water mark setting from 0x20 to 0x29.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://lore.kernel.org/r/1723428055-27021-5-git-send-email-hongxing.zhu@nxp.comSigned-off-by: Niklas Cassel <cassel@kernel.org>

i.MX8QM AHCI SATA doesn't need set AHB clock rate to config the vendor
specified TIMER1MS register.

Set AHB clock rate only for i.MX53 and i.MX6Q.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/1723428055-27021-4-git-send-email-hongxing.zhu@nxp.comSigned-off-by: Niklas Cassel <cassel@kernel.org>

Clean up code by using PHY interface provided by the PHY driver under
PHY subsystem(drivers/phy/freescale/phy-fsl-imx8qm-hsio.c).
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/1723428055-27021-3-git-send-email-hongxing.zhu@nxp.comSigned-off-by: Niklas Cassel <cassel@kernel.org>

Add i.MX8QM AHCI "fsl,imx8qm-ahci" compatible strings.

i.MX8QM AHCI SATA doesn't require AHB clock rate to set the vendor
specified TIMER1MS register. ahb clock is not required by i.MX8QM AHCI.

Update the description of clocks in the dt-binding accordingly.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/1723428055-27021-2-git-send-email-hongxing.zhu@nxp.comSigned-off-by: Niklas Cassel <cassel@kernel.org>

In ata_dev_print_quirks(), return early if ata_dev_print_info() returns
false or if we already printed quirk information. This is to avoid
printing a device quirks multiple times (that is, each time
ata_dev_revalidate() is called).

To remember if ata_dev_print_quirks() was already executed, define the
EH context flag ATA_EHI_DID_PRINT_QUIRKS and set this flag in
ata_dev_print_quirks().
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 58157d60 ("ata: libata: Print quirks applied to devices")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>

The function ata_noop_qc_prep(), as its name implies, does nothing and
simply returns AC_ERR_OK. For drivers that do not need any special
preparations of queued commands, we can avoid having to define struct
ata_port qc_prep operation by simply testing if that operation is
defined or not in ata_qc_issue(). Make this change and remove
ata_noop_qc_prep().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>

Rename the function hpt_dma_blacklisted() to the more neutral
hpt_dma_broken().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>

Rename the function hpt_dma_blacklisted() to the more neutral
hpt_dma_broken().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>

Remove the use of the term "blacklist". What the comment using that term
refers to does not seem to exist at all anyway as the driver does not
have such list but rather only a list of compatible controllers.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>

Remove the comment using the term "blacklist" from piix_init_sidpr().
That comment is useless given that the function piix_no_sidpr() name is
clear about what is being checked.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>

Rename the array sil_blacklist to sil_quirks as this name is more
neutral and is also consistent with how this driver define quirks with
the SIL_QUIRK_XXX flags.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>

Rephrase the comment for the eMachines entry in the sysids array of
ahci_broken_suspend() to not use the term blacklist.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>

Let's not use the term blacklist in the function
serverworks_osb4_filter() documentation comment and rather simply refer
to what that function looks at: the list of devices with groken UDMA5.

While at it, also constify the values of the csb_bad_ata100 array.

Of note is that all of this should probably be handled using libata
quirk mechanism but it is unclear if these UDMA5 quirks are specific
to this controller only.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>

Introduce the function ata_dev_print_quirks() to print the quirk flags
that will be applied to a scanned device. This new function is called
from ata_dev_quirks() when a match on a device model or device model
and revision is found for a device in the __ata_dev_quirks array.

To implement this function, the ATA_QUIRK_ flags are redefined using
the new enum ata_quirk which defines the bit shift for each quirk
flag. The array of strings ata_quirk_names is used to define the name
of each flag, which are printed by ata_dev_print_quirks().

Example output for a device listed in the __ata_dev_quirks array and
which has the ATA_QUIRK_DISABLE flag applied:

[10193.461270] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[10193.469190] ata1.00: Model 'ASMT109x- Config', rev '2143 5', applying quirks: disable
[10193.469195] ata1.00: unsupported device, disabling
[10193.481564] ata1.00: disable device

enum ata_quirk also defines the __ATA_QUIRK_MAX value as one plus the
last quirk flag defined. This value is used in ata_dev_quirks() to add a
build time check that all quirk flags fit within the unsigned int
(32-bits) quirks field of struct ata_device.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>

According to Wiktionary, the verb "hork" is computing slang defined as
"To foul up; to be occupied with difficulty, tangle, or unpleasantness;
to be broken" (https://en.wiktionary.org/wiki/hork#Verb). libata uses
this with the term "horkage" to refer to broken device features. Given
that this term is not widely used and its meaning unknown to many,
rename it to the more commonly used term "quirk", similar to many other
places in the kernel.

The renaming done is:
1) Rename all ATA_HORKAGE_XXX flags to ATA_QUIRK_XXX
2) Rename struct ata_device horkage field to quirks
3) Rename struct ata_blacklist_entry to struct ata_dev_quirks_entry. The
   array of these structures defining quirks for known devices is
   renamed __ata_dev_quirks.
4) The functions ata_dev_blacklisted() and ata_force_horkage() are
   renamed to ata_dev_quirks() and ata_force_quirks() respectively.
5) All the force_horkage_xxx() macros are renamed to force_quirk_xxx()

And while at it, make sure that the type "unsigned int" is used
consistantly for quirk flags variables and data structure fields.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>

Rename the function ata_dma_blacklisted() to ata_dev_nodma() as this new
name is more neutral. The function signature is also changed to return a
boolean instead of an int.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>

Change the function ata_dev_knobble() to return a boolean instead of a
u8.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>

The APQ8064 SATA AHCI controller is used in apq8064.dtsi, although it
was not documented in the old text bindings.
Add its compatible to ahci-platform.yaml.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>

Remove old text bindings and add ipq806x AHCI compatible to
ahci-common.yaml, as well as its required properties.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>

Merge tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix RPM package build error caused by an incorrect locale setup

 - Mark modules.weakdep as ghost in RPM package

 - Fix the odd combination of -S and -c in stack protector scripts,
   which is an error with the latest Clang

* tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: Fix '-S -c' in x86 stack protector scripts
  kbuild: rpm-pkg: ghost modules.weakdep file
  kbuild: rpm-pkg: Fix C locale setup

This simplifies the min_t() and max_t() macros by no longer making them
work in the context of a C constant expression.

That means that you can no longer use them for static initializers or
for array sizes in type definitions, but there were only a couple of
such uses, and all of them were converted (famous last words) to use
MIN_T/MAX_T instead.

Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 3a7e02c0 ("minmax: avoid overly complicated constant
expressions in VM code") added the simpler MIN_T/MAX_T macros in order
to avoid some excessive expansion from the rather complicated regular
min/max macros.

The complexity of those macros stems from two issues:

 (a) trying to use them in situations that require a C constant
     expression (in static initializers and for array sizes)

 (b) the type sanity checking

and MIN_T/MAX_T avoids both of these issues.

Now, in the whole (long) discussion about all this, it was pointed out
that the whole type sanity checking is entirely unnecessary for
min_t/max_t which get a fixed type that the comparison is done in.

But that still leaves min_t/max_t unnecessarily complicated due to
worries about the C constant expression case.

However, it turns out that there really aren't very many cases that use
min_t/max_t for this, and we can just force-convert those.

This does exactly that.

Which in turn will then allow for much simpler implementations of
min_t()/max_t().  All the usual "macros in all upper case will evaluate
the arguments multiple times" rules apply.

We should do all the same things for the regular min/max() vs MIN/MAX()
cases, but that has the added complexity of various drivers defining
their own local versions of MIN/MAX, so that needs another level of
fixes first.

Link: https://lore.kernel.org/all/b47fad1d0cf8449886ad148f8c013dae@AcuMS.aculab.com/
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'ubifs-for-linus-6.11-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs

Pull UBI and UBIFS updates from Richard Weinberger:

 - Many fixes for power-cut issues by Zhihao Cheng

 - Another ubiblock error path fix

 - ubiblock section mismatch fix

 - Misc fixes all over the place

* tag 'ubifs-for-linus-6.11-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubi: Fix ubi_init() ubiblock_exit() section mismatch
  ubifs: add check for crypto_shash_tfm_digest
  ubifs: Fix inconsistent inode size when powercut happens during appendant writing
  ubi: block: fix null-pointer-dereference in ubiblock_create()
  ubifs: fix kernel-doc warnings
  ubifs: correct UBIFS_DFS_DIR_LEN macro definition and improve code clarity
  mtd: ubi: Restore missing cleanup on ubi_init() failure path
  ubifs: dbg_orphan_check: Fix missed key type checking
  ubifs: Fix unattached inode when powercut happens in creating
  ubifs: Fix space leak when powercut happens in linking tmpfile
  ubifs: Move ui->data initialization after initializing security
  ubifs: Fix adding orphan entry twice for the same inode
  ubifs: Remove insert_dead_orphan from replaying orphan process
  Revert "ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path"
  ubifs: Don't add xattr inode into orphan area
  ubifs: Fix unattached xattr inode if powercut happens after deleting
  mtd: ubi: avoid expensive do_div() on 32-bit machines
  mtd: ubi: make ubi_class constant
  ubi: eba: properly rollback inside self_check_eba