- 27 Nov, 2020 7 commits
-
-
kernel test robot authored
Condition !A || A && B is equivalent to !A || B. Generated by: scripts/coccinelle/misc/excluded_middle.cocci Fixes: b76f0ea0 ("coccinelle: misc: add excluded_middle.cocci script") CC: Denis Efremov <efremov@linux.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Julia Lawall <julia.lawall@inria.fr> Signed-off-by:
Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Thara Gopinath authored
Partial hash was being copied into the final result buffer without the entire message block processed. Depending on how the end user processes this result buffer, errors vary from result buffer corruption to result buffer poisoing. Fix this issue by ensuring that only the final hash value is copied into the result buffer. Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by:
-
Thara Gopinath authored
Add support Qualcomm Crypto Engine accelerated encryption and authentication algorithms on sdm845. Reviewed-by:
-
Ard Biesheuvel authored
Wiring the SIMD code into the generic driver has the unfortunate side effect that the tcrypt testing code cannot distinguish them, and will therefore not use the latter to fuzz test the former, as it does for other algorithms. So let's refactor the code a bit so we can register two implementations: aegis128-generic and aegis128-simd. Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Reviewed-by:
Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by:
-
Ard Biesheuvel authored
Instead of calculating the tag and returning it to the caller on decryption, use a SIMD compare and min across vector to perform the comparison. This is slightly more efficient, and removes the need on the caller's part to wipe the tag from memory if the decryption failed. While at it, switch to unsigned int when passing cryptlen and assoclen - we don't support input sizes where it matters anyway. Signed-off-by:
-
Ard Biesheuvel authored
Avoid copying the tail block via a stack buffer if the total size exceeds a single AEGIS block. In this case, we can use overlapping loads and stores and NEON permutation instructions instead, which leads to a modest performance improvement on some cores (< 5%), and is slightly cleaner. Note that we still need to use a stack buffer if the entire input is smaller than 16 bytes, given that we cannot use 16 byte NEON loads and stores safely in this case. Signed-off-by:
-
Ard Biesheuvel authored
The AEGIS spec mentions explicitly that the security guarantees hold only if the resulting plaintext and tag of a failed decryption are withheld. So ensure that we abide by this. While at it, drop the unused struct aead_request *req parameter from crypto_aegis128_process_crypt(). Reviewed-by:
-
- 20 Nov, 2020 13 commits
-
-
Corentin Labbe authored
This patch fixes the following smatch warnings: drivers/crypto/allwinner/sun8i-ce/sun8i-ce-hash.c:412 sun8i_ce_hash_run() warn: possible memory leak of 'result' Note: "buf" is leaked as well. Furthermore, in case of ENOMEM, crypto_finalize_hash_request() was not called which was an error. Fixes: 56f6d5ae ("crypto: sun8i-ce - support hash algorithms") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
Colin Ian King authored
There are a couple of spelling mistakes in two crypto Kconfig files. Fix these. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Giovanni Cabiddu authored
Add support for QAT 4xxx devices. Signed-off-by:
Fiona Trahe <fiona.trahe@intel.com> Signed-off-by:
-
Giovanni Cabiddu authored
Add an hook to initialize the vector routing table with the default values before MSIx is enabled. The new function set_msix_rttable() is called only if present in the struct adf_hw_device_data of the device. This is to allow for QAT devices that do not support that functionality. Signed-off-by:
-
Giovanni Cabiddu authored
Introduce support for devices that require multiple firmware images. If a device requires more than a firmware image to operate, load the image to the appropriate Acceleration Engine (AE). Signed-off-by:
-
Zhang Qilong authored
The pm_runtime_enable will increase power disable depth. Thus a pairing decrement is needed on the error handling path to keep it balanced according to context. Fixes: f7b2b5dd ("crypto: omap-aes - add error check for pm_runtime_get_sync") Signed-off-by:
Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by:
-
Yang Shen authored
The patch 'irqchip/gic-v3-its: Balance initial LPI affinity across CPUs' set the IRQ to an uncentain CPU. If an IRQ is bound to the CPU used by the thread which is sending request, the throughput will be just half. So allocate a 'work_queue' and set as 'WQ_UNBOUND' to do the back half work on some different CPUS. Signed-off-by:
Yang Shen <shenyang39@huawei.com> Reviewed-by:
Zaibo Xu <xuzaibo@huawei.com> Reviewed-by:
Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by:
-
Herbert Xu authored
This patch moves the curve25519_selftest into curve25519.h so we don't get a warning from gcc complaining about a missing prototype. Reported-by:
-
Eric Biggers authored
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2, and <crypto/sha3.h> contains declarations for SHA-3. This organization is inconsistent, but more importantly SHA-1 is no longer considered to be cryptographically secure. So to the extent possible, SHA-1 shouldn't be grouped together with any of the other SHA versions, and usage of it should be phased out. Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and <crypto/sha2.h>, and make everyone explicitly specify whether they want the declarations for SHA-1, SHA-2, or both. This avoids making the SHA-1 declarations visible to files that don't want anything to do with SHA-1. It also prepares for potentially moving sha1.h into a new insecure/ or dangerous/ directory. Signed-off-by:
Eric Biggers <ebiggers@google.com> Acked-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Nathan Chancellor authored
Clang warns: drivers/crypto/amcc/crypto4xx_core.c:921:60: warning: operator '?:' has lower precedence than '|'; '|' will be evaluated first [-Wbitwise-conditional-parentheses] (crypto_tfm_alg_type(req->tfm) == CRYPTO_ALG_TYPE_AEAD) ? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ drivers/crypto/amcc/crypto4xx_core.c:921:60: note: place parentheses around the '|' expression to silence this warning (crypto_tfm_alg_type(req->tfm) == CRYPTO_ALG_TYPE_AEAD) ? ^ ) drivers/crypto/amcc/crypto4xx_core.c:921:60: note: place parentheses around the '?:' expression to evaluate it first (crypto_tfm_alg_type(req->tfm) == CRYPTO_ALG_TYPE_AEAD) ? ^ ( 1 warning generated. It looks like this should have been a logical OR so that PD_CTL_HASH_FINAL gets added to the w bitmask if crypto_tfm_alg_type is either CRYPTO_ALG_TYPE_AHASH or CRYPTO_ALG_TYPE_AEAD. Change the operator so that everything works properly. Fixes: 4b5b7999 ("crypto: crypto4xx - fix stalls under heavy load") Link: https://github.com/ClangBuiltLinux/linux/issues/1198Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Christian Lamparter <chunkeey@gmail.com> Signed-off-by:
-
Horia Geantă authored
Wang Qing reports that IS_ERR_OR_NULL() should be matched with PTR_ERR_OR_ZERO(), not PTR_ERR(). As it turns out, the error path always returns an error code, i.e. NULL is never returned. Update the code accordingly - s/IS_ERR_OR_NULL/IS_ERR. Reported-by:
Wang Qing <wangqing@vivo.com> Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
-
Ard Biesheuvel authored
Instead of copying the calculated authentication tag to memory and calling crypto_memneq() to verify it, use vector bytewise compare and min across vector instructions to decide whether the tag is valid. This is more efficient, and given that the tag is only transiently held in a NEON register, it is also safer, given that calculated tags for failed decryptions should be withheld. Signed-off-by:
-
Kai Ye authored
Fix aead auth setting key process error. if use soft shash function, driver need to use digest size replace of the user input key length. Signed-off-by:
Kai Ye <yekai13@huawei.com> Signed-off-by:
-
- 13 Nov, 2020 20 commits
-
-
Ard Biesheuvel authored
Based on lessons learnt from optimizing the 32-bit version of this driver, we can simplify the arm64 version considerably, by reordering the final two stores when the last block is not a multiple of 64 bytes. This removes the need to use permutation instructions to calculate the elements that are clobbered by the final overlapping store, given that the store of the penultimate block now follows it, and that one carries the correct values for those elements already. While at it, simplify the overlapping loads as well, by calculating the address of the final overlapping load upfront, and switching to this address for every load that would otherwise extend past the end of the source buffer. There is no impact on performance, but the resulting code is substantially smaller and easier to follow. Cc: Eric Biggers <ebiggers@google.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Signed-off-by:
-
Jack Xu authored
Add support for the QAT gen4 devices in the firmware loader. Signed-off-by:
Jack Xu <jack.xu@intel.com> Reviewed-by:
-
Jack Xu authored
Add support for broadcasting mode in firmware loader to enable the next generation of QAT devices. Signed-off-by:
Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by:
-
Jack Xu authored
Add support for shared ustore mode support. This is required by the next generation of QAT devices to share the same fw image across engines. Signed-off-by:
-
Jack Xu authored
Introduce new API, qat_uclo_set_cfg_ae_mask(), to allow the load of the firmware image to a subset of Acceleration Engines (AEs). This is required by the next generation of QAT devices to be able to load different firmware images to the device. Signed-off-by:
-
Jack Xu authored
Add firmware control unit (FCU) CSRs to chip info so the firmware authentication code is common between all devices. Signed-off-by:
-
Jack Xu authored
Add support for CSS3K, which uses RSA3K as image signature algorithm, to support the next generation of QAT devices. Signed-off-by:
-
Jack Xu authored
Use ae_mask to decide which Accelerator Engine (AE) to target in AE related operations, instead of a sequential loop, to skip AEs that are fused out. Signed-off-by:
-
Jack Xu authored
Add null pointer check when freeing the memory for firmware. Signed-off-by:
-
Jack Xu authored
Add misc control CSR to chip info since the CSR offset will be different in the next generation of QAT devices. Signed-off-by:
-
Jack Xu authored
Add the wake up event to chip info since this value will be different in the next generation of QAT devices. Signed-off-by:
-
Jack Xu authored
Add global clock enable CSR to the chip info since the CSR offset will be different in the next generation of QAT devices. Signed-off-by:
-
Jack Xu authored
Add reset CSR offset and mask to chip info since they are different in new QAT devices. This also simplifies the reset/clrReset functions by using the reset mask. Signed-off-by:
-
Jack Xu authored
Add the local memory size to the chip info since the size of this memory will be different in the next generation of QAT devices. Signed-off-by:
-
Jack Xu authored
Add support for local memory lm2 and lm3 which is introduced in the next generation of QAT devices. Signed-off-by:
-
Jack Xu authored
Introduce the next neighbor (NN) capability in chip_info as NN registers are not supported in certain SKUs of QAT. Signed-off-by:
-
Jack Xu authored
Modify condition in qat_uclo_wr_mimage() to use a capability of the device (sram_visible), rather than the device ID, so the check is not specific to devices of the same type. Signed-off-by:
-
Jack Xu authored
Introduce the chip info structure which contains device specific information. The initialization path has been split between common and hardware specific in order to facilitate the introduction of the next generation hardware. Signed-off-by:
-
Jack Xu authored
Replace long expressions with local variables in the functions qat_uclo_wr_uimage_page(), qat_uclo_init_globals() and qat_uclo_init_umem_seg() to improve readability. Signed-off-by:
-
Jack Xu authored
Refactor qat_uclo_set_ae_mode() by moving the logic that sets the AE modes to a separate function, qat_hal_set_modes(). Signed-off-by:
-
