Pull IEEE 1394 (FireWire) subsystem updates from Stefan Richter:
  - IPv4-over-1394: fixes for broadcast and multicast
  - SBP-2: allow thin-provisioning related commands
  - trivia

* tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: net: remove unused variable in fwnet_receive_broadcast()
  firewire: net: Fix handling of fragmented multicast/broadcast packets.
  firewire: sbp2: allow WRITE SAME and REPORT SUPPORTED OPERATION CODES
  tools/firewire: nosy-dump: check for allocation failure

Pull sound updates from Takashi Iwai:
 "This update contains a fairly wide range of changes all over in sound
  subdirectory, mainly because of UAPI header moves by David and __dev*
  annotation removals by Bill.  Other highlights are:

   - Introduced the support for wallclock timestamps in ALSA PCM core

   - Add the poll loop implementation for HD-audio jack detection

   - Yet more VGA-switcheroo fixes for HD-audio

   - New VIA HD-audio codec support

   - More fixes on resource management in USB audio and MIDI drivers

   - More quirks for USB-audio ASUS Xonar U3, Reloop Play, Focusrite,
     Roland VG-99, etc

   - Add support for FastTrack C400 usb-audio

   - Clean ups in many drivers regarding firmware loading

   - Add PSC724 Ultiimate Edge support to ice1712

   - A few hdspm driver updates

   - New Stanton SCS.1d/1m FireWire driver

   - Standardisation of the logging in ASoC codes

   - DT and dmaengine support for ASoC Atmel

   - Support for Wolfson ADSP cores

   - New drivers for Freescale/iVeia P1022 and Maxim MAX98090

   - Lots of other ASoC driver fixes and developments"

Fix up trivial conflicts.  And go out on a limb and assume the dts file
'status' field of one of the conflicting things was supposed to be
"disabled", not "disable" like in pretty much all other cases.

* tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (341 commits)
  ALSA: hda - Move runtime PM check to runtime_idle callback
  ALSA: hda - Add stereo-dmic fixup for Acer Aspire One 522
  ALSA: hda - Avoid doubly suspend after vga switcheroo
  ALSA: usb-audio: Enable S/PDIF on the ASUS Xonar U3
  ALSA: hda - Check validity of CORB/RIRB WP reads
  ALSA: hda - use usleep_range in link reset and change timeout check
  ALSA: HDA: VIA: Add support for codec VT1808.
  ALSA: HDA: VIA Add support for codec VT1705CF.
  ASoC: codecs: remove __dev* attributes
  ASoC: utils: remove __dev* attributes
  ASoC: ux500: remove __dev* attributes
  ASoC: txx9: remove __dev* attributes
  ASoC: tegra: remove __dev* attributes
  ASoC: spear: remove __dev* attributes
  ASoC: sh: remove __dev* attributes
  ASoC: s6000: remove __dev* attributes
  ASoC: OMAP: remove __dev* attributes
  ASoC: nuc900: remove __dev* attributes
  ASoC: mxs: remove __dev* attributes
  ASoC: kirkwood: remove __dev* attributes
  ...

Pull ARM SoC board updates, take 2 from Olof Johansson:
 "This branch contains board updates for shmobile that had dependencies
  on earlier branches past the first driver branch, and thus are merged
  separately.

  Most of these are to enable audio and USB on shmobile.  They contain a
  dependent ASoC branch that has been coordinated with Mark Brown."

* tag 'boards2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: shmobile: mackerel: Add FLCTL IRQ resource
  ARM: shmobile: use FSI driver's audio clock on ap4evb
  ARM: shmobile: use FSI driver's audio clock on mackerel
  ARM: shmobile: use FSI driver's audio clock on armadillo800eva
  ARM: shmobile: mackerel: enable DMAEngine on USB Host
  ARM: shmobile: marzen: add USB OHCI driver support
  ARM: shmobile: marzen: add USB EHCI driver support
  ARM: shmobile: marzen: add USB phy support
  ASoC: fsi: add master clock control functions
  ASoC: fsi: care fsi_hw_start/stop() return value
  ASoC: fsi: fsi_set_master_clk() was called from fsi_hw_xxx() only
  ASoC: fsi: use devm_request_irq()
  ASoC: fsi: fixup channels_min/max

Pull ARM SoC driver specific changes from Olof Johansson:
 "A collection of mostly SoC-specific driver updates:
   - a handful of pincontrol and setup changes
   - new drivers for hwmon and reset controller for vexpress
   - timing support updates for OMAP (gpmc and other interfaces)
   - plus a collection of smaller cleanups"

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
  ARM: ux500: fix pin warning
  ARM: OMAP2+: tusb6010: generic timing calculation
  ARM: OMAP2+: smc91x: generic timing calculation
  ARM: OMAP2+: onenand: generic timing calculation
  ARM: OMAP2+: gpmc: generic timing calculation
  ARM: OMAP2+: gpmc: handle additional timings
  ARM: OMAP2+: nand: remove redundant rounding
  gpio: samsung: use pr_* instead of printk
  ARM: ux500: fixup magnetometer pins
  ARM: ux500: add STM pin configuration
  ARM: ux500: 8500: add pinctrl support for uart1 and uart2
  ARM: ux500: cosmetic fixups for uart0
  gpio: samsung: Fix input mode setting function for GPIO int
  ARM: SAMSUNG: Insert bitmap_gpio_int member in samsung_gpio_chip
  ARM: ux500: 8500: define SDI sleep states
  ARM: vexpress: Reset driver
  ARM: ux500: 8500: update SKE keypad pinctrl table
  hwmon: Versatile Express hwmon driver
  ARM: ux500: delete duplicate macro
  ARM: ux500: 8500: add IDLE pin configuration for SPI
  ...

Pull ARM SoC power management and clock changes from Olof Johansson:
 "This branch contains a largeish set of updates of power management and
  clock setup.  The bulk of it is for OMAP/AM33xx platforms, but also a
  few around hotplug/suspend/resume on Exynos.

  It includes a split-up of some of the OMAP clock data into separate
  files which adds to the diffstat, but gross delta is fairly reasonable."

* tag 'pm-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits)
  ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h
  ASoC: OMAP: mcbsp fixes for enabling ARM multiplatform support
  watchdog: OMAP: fixup for ARM multiplatform support
  ARM: EXYNOS: Add flush_cache_all in suspend finisher
  ARM: EXYNOS: Remove scu_enable from cpuidle
  ARM: EXYNOS: Fix soft reboot hang after suspend/resume
  ARM: EXYNOS: Add support for rtc wakeup
  ARM: EXYNOS: fix the hotplug for Cortex-A15
  ARM: OMAP2+: omap_device: Correct resource handling for DT boot
  ARM: OMAP2+: hwmod: Add possibility to count hwmod resources based on type
  ARM: OMAP2+: hwmod: Add support for per hwmod/module context lost count
  ARM: OMAP2+: PRM: initialize some PRM functions early
  ARM: OMAP2+: voltage: fixup oscillator handling when CONFIG_PM=n
  ARM: OMAP4: USB: power down MUSB PHY during boot
  ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts
  ARM: OMAP2xxx: clock: drop obsolete clock data
  ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts
  ARM: OMAP3+: DPLL: drop !CONFIG_COMMON_CLK sections
  ARM: AM33xx: clock: drop obsolete clock data
  ARM: OMAP3xxx: clk: drop obsolete clock data
  ...

Pull ARM SoC multiplatform conversion patches from Olof Johansson:
 "Here are more patches in the progression towards multiplatform, sparse
  irq conversions in particular.

  Tegra has a handful of cleanups and general groundwork, but is not
  quite there yet on full enablement.

  Platforms that are enabled through this branch are VT8500 and Zynq.
  Note that i.MX was converted in one of the earlier cleanup branches as
  well (before we started a separate topic for multiplatform).  And both
  new platforms for this merge window, sunxi and bcm, were merged with
  multiplatform support enabled."

Fix up conflicts mostly as per Olof.

* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits)
  ARM: zynq: Remove all unused mach headers
  ARM: zynq: add support for ARCH_MULTIPLATFORM
  ARM: zynq: make use of debug_ll_io_init()
  ARM: zynq: remove TTC early mapping
  ARM: tegra: move debug-macro.S to include/debug
  ARM: tegra: don't include iomap.h from debug-macro.S
  ARM: tegra: decouple uncompress.h and debug-macro.S
  ARM: tegra: simplify DEBUG_LL UART selection options
  ARM: tegra: select SPARSE_IRQ
  ARM: tegra: enhance timer.c to get IO address from device tree
  ARM: tegra: enhance timer.c to get IRQ info from device tree
  ARM: timer: fix checkpatch warnings
  ARM: tegra: add TWD to device tree
  ARM: tegra: define DT bindings for and instantiate RTC
  ARM: tegra: define DT bindings for and instantiate timer
  clocksource/mtu-nomadik: use apb_pclk
  clk: ux500: Register mtu apb_pclocks
  ARM: plat-nomadik: convert platforms to SPARSE_IRQ
  mfd/db8500-prcmu: use the irq_domain_add_simple()
  mfd/ab8500-core: use irq_domain_add_simple()
  ...

Pull ARM SoC device tree conversions and enablement from Olof Johansson:
 "Continued device tree conversion and enablement across a number of
  platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other
  smaller series as well.

  ux500 has seen continued conversion for platforms.  Several platforms
  have seen pinctrl-via-devicetree conversions for simpler
  multiplatform.  Tegra is adding data for new devices/drivers, and
  Exynos has a bunch of new bindings and devices added as well.

  So, pretty much the same progression in the right direction as the
  last few releases."

Fix up conflicts as per Olof.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (185 commits)
  ARM: ux500: Rename dbx500 cpufreq code to be more generic
  ARM: dts: add missing ux500 device trees
  ARM: ux500: Stop registering the PCM driver from platform code
  ARM: ux500: Move board specific GPIO info out to subordinate DTS files
  ARM: ux500: Disable the MMCI gpio-regulator by default
  ARM: Kirkwood: remove kirkwood_ehci_init() from new boards
  ARM: Kirkwood: Add support LED of OpenBlocks A6
  ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6
  ARM: kirkwood: Add NAND partiton map for OpenBlocks A6
  ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6
  ARM: kirkwood: Add support DT of second I2C bus
  ARM: kirkwood: Convert mplcec4 board to pinctrl
  ARM: Kirkwood: Convert km_kirkwood to pinctrl
  ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl
  ARM: Kirkwood: Convert IX2-200 to pinctrl.
  ARM: Kirkwood: Convert lsxl boards to pinctrl.
  ARM: Kirkwood: Convert ib62x0 to pinctrl.
  ARM: Kirkwood: Convert GoFlex Net to pinctrl.
  ARM: Kirkwood: Convert dreamplug to pinctrl.
  ARM: Kirkwood: Convert dockstar to pinctrl.
  ...

Pull networking changes from David Miller:

1) Allow to dump, monitor, and change the bridge multicast database
   using netlink.  From Cong Wang.

2) RFC 5961 TCP blind data injection attack mitigation, from Eric
   Dumazet.

3) Networking user namespace support from Eric W. Biederman.

4) tuntap/virtio-net multiqueue support by Jason Wang.

5) Support for checksum offload of encapsulated packets (basically,
   tunneled traffic can still be checksummed by HW).  From Joseph
   Gasparakis.

6) Allow BPF filter access to VLAN tags, from Eric Dumazet and
   Daniel Borkmann.

7) Bridge port parameters over netlink and BPDU blocking support
   from Stephen Hemminger.

8) Improve data access patterns during inet socket demux by rearranging
   socket layout, from Eric Dumazet.

9) TIPC protocol updates and cleanups from Ying Xue, Paul Gortmaker, and
   Jon Maloy.

10) Update TCP socket hash sizing to be more in line with current day
    realities.  The existing heurstics were choosen a decade ago.
    From Eric Dumazet.

11) Fix races, queue bloat, and excessive wakeups in ATM and
    associated drivers, from Krzysztof Mazur and David Woodhouse.

12) Support DOVE (Distributed Overlay Virtual Ethernet) extensions
    in VXLAN driver, from David Stevens.

13) Add "oops_only" mode to netconsole, from Amerigo Wang.

14) Support set and query of VEB/VEPA bridge mode via PF_BRIDGE, also
    allow DCB netlink to work on namespaces other than the initial
    namespace.  From John Fastabend.

15) Support PTP in the Tigon3 driver, from Matt Carlson.

16) tun/vhost zero copy fixes and improvements, plus turn it on
    by default, from Michael S. Tsirkin.

17) Support per-association statistics in SCTP, from Michele
    Baldessari.

And many, many, driver updates, cleanups, and improvements.  Too
numerous to mention individually.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
  net/mlx4_en: Add support for destination MAC in steering rules
  net/mlx4_en: Use generic etherdevice.h functions.
  net: ethtool: Add destination MAC address to flow steering API
  bridge: add support of adding and deleting mdb entries
  bridge: notify mdb changes via netlink
  ndisc: Unexport ndisc_{build,send}_skb().
  uapi: add missing netconf.h to export list
  pkt_sched: avoid requeues if possible
  solos-pci: fix double-free of TX skb in DMA mode
  bnx2: Fix accidental reversions.
  bna: Driver Version Updated to 3.1.2.1
  bna: Firmware update
  bna: Add RX State
  bna: Rx Page Based Allocation
  bna: TX Intr Coalescing Fix
  bna: Tx and Rx Optimizations
  bna: Code Cleanup and Enhancements
  ath9k: check pdata variable before dereferencing it
  ath5k: RX timestamp is reported at end of frame
  ath9k_htc: RX timestamp is reported at end of frame
  ...

Merge tag 'for-linus-20121212' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-mn10300

Pull MN10300 changes from David Howells:
 "miscellaneous MN10300 arch patches.  I've based it on top of Al Viro's
  signal tree - so these patches should be pulled after that."

* tag 'for-linus-20121212' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-mn10300:
  MN10300: Use asm-generic/pci_iomap.h
  MN10300: Get rid of unused variable from ASB2305 PCI code
  MN10300: ASB2305 PCI code needs linux/irq.h
  mn10300/mm/fault.c: Port OOM changes to do_page_fault
  MN10300: Handle cacheable PCI regions in pci_iomap()
  MN10300: fix debug polling in ttySM driver
  MN10300: ttySM: clean up unnecessary casting
  MN10300: fix SMP synchronization between txdma and serial driver
  MN10300: fix serial port vdma irq setup for SMP
  MN10300: cleanup IRQ affinity setting
  MN10300: ttySM: Use memory barriers correctly in circular buffer logic

Another smaller branch merged into next/pm before pull request.
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge together a couple of the smaller pm/clock branches into one.
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull big execve/kernel_thread/fork unification series from Al Viro:
 "All architectures are converted to new model.  Quite a bit of that
  stuff is actually shared with architecture trees; in such cases it's
  literally shared branch pulled by both, not a cherry-pick.

  A lot of ugliness and black magic is gone (-3KLoC total in this one):

   - kernel_thread()/kernel_execve()/sys_execve() redesign.

     We don't do syscalls from kernel anymore for either kernel_thread()
     or kernel_execve():

     kernel_thread() is essentially clone(2) with callback run before we
     return to userland, the callbacks either never return or do
     successful do_execve() before returning.

     kernel_execve() is a wrapper for do_execve() - it doesn't need to
     do transition to user mode anymore.

     As a result kernel_thread() and kernel_execve() are
     arch-independent now - they live in kernel/fork.c and fs/exec.c
     resp.  sys_execve() is also in fs/exec.c and it's completely
     architecture-independent.

   - daemonize() is gone, along with its parts in fs/*.c

   - struct pt_regs * is no longer passed to do_fork/copy_process/
     copy_thread/do_execve/search_binary_handler/->load_binary/do_coredump.

   - sys_fork()/sys_vfork()/sys_clone() unified; some architectures
     still need wrappers (ones with callee-saved registers not saved in
     pt_regs on syscall entry), but the main part of those suckers is in
     kernel/fork.c now."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (113 commits)
  do_coredump(): get rid of pt_regs argument
  print_fatal_signal(): get rid of pt_regs argument
  ptrace_signal(): get rid of unused arguments
  get rid of ptrace_signal_deliver() arguments
  new helper: signal_pt_regs()
  unify default ptrace_signal_deliver
  flagday: kill pt_regs argument of do_fork()
  death to idle_regs()
  don't pass regs to copy_process()
  flagday: don't pass regs to copy_thread()
  bfin: switch to generic vfork, get rid of pointless wrappers
  xtensa: switch to generic clone()
  openrisc: switch to use of generic fork and clone
  unicore32: switch to generic clone(2)
  score: switch to generic fork/vfork/clone
  c6x: sanitize copy_thread(), get rid of clone(2) wrapper, switch to generic clone()
  take sys_fork/sys_vfork/sys_clone prototypes to linux/syscalls.h
  mn10300: switch to generic fork/vfork/clone
  h8300: switch to generic fork/vfork/clone
  tile: switch to generic clone()
  ...

Conflicts:
	arch/microblaze/include/asm/Kbuild

Pull ARM SoC board updates from Olof Johansson:
 "This branch contains a set of various board updates for ARM platforms.

  A few shmobile platforms that are stale have been removed, some
  defconfig updates for various boards selecting new features such as
  pinctrl subsystem support, and various updates enabling peripherals,
  etc."

Fix up conflicts mostly as per Olof.

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (58 commits)
  ARM: S3C64XX: Add dummy supplies for Glenfarclas LDOs
  ARM: S3C64XX: Add registration of WM2200 Bells device on Cragganmore
  ARM: kirkwood: Add Plat'Home OpenBlocks A6 support
  ARM: Dove: update defconfig
  ARM: Kirkwood: update defconfig for new boards
  arm: orion5x: add DT related options in defconfig
  arm: orion5x: convert 'LaCie Ethernet Disk mini v2' to Device Tree
  arm: orion5x: basic Device Tree support
  arm: orion5x: mechanical defconfig update
  ARM: kirkwood: Add support for the MPL CEC4
  arm: kirkwood: add support for ZyXEL NSA310
  ARM: Kirkwood: new board USI Topkick
  ARM: kirkwood: use gpio-fan DT binding on lsxl
  ARM: Kirkwood: add Netspace boards to defconfig
  ARM: kirkwood: DT board setup for Network Space Mini v2
  ARM: kirkwood: DT board setup for Network Space Lite v2
  ARM: kirkwood: DT board setup for Network Space v2 and parents
  leds: leds-ns2: add device tree binding
  ARM: Kirkwood: Enable the second I2C bus
  ARM: mmp: select pinctrl driver
  ...

Pull ARM SoC updates from Olof Johansson:
 "This contains the bulk of new SoC development for this merge window.

  Two new platforms have been added, the sunxi platforms (Allwinner A1x
  SoCs) by Maxime Ripard, and a generic Broadcom platform for a new
  series of ARMv7 platforms from them, where the hope is that we can
  keep the platform code generic enough to have them all share one mach
  directory.  The new Broadcom platform is contributed by Christian
  Daudt.

  Highbank has grown support for Calxeda's next generation of hardware,
  ECX-2000.

  clps711x has seen a lot of cleanup from Alexander Shiyan, and he's
  also taken on maintainership of the platform.

  Beyond this there has been a bunch of work from a number of people on
  converting more platforms to IRQ domains, pinctrl conversion, cleanup
  and general feature enablement across most of the active platforms."

Fix up trivial conflicts as per Olof.

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (174 commits)
  mfd: vexpress-sysreg: Remove LEDs code
  irqchip: irq-sunxi: Add terminating entry for sunxi_irq_dt_ids
  clocksource: sunxi_timer: Add terminating entry for sunxi_timer_dt_ids
  irq: versatile: delete dangling variable
  ARM: sunxi: add missing include for mdelay()
  ARM: EXYNOS: Avoid early use of of_machine_is_compatible()
  ARM: dts: add node for PL330 MDMA1 controller for exynos4
  ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412
  ARM: EXYNOS: add UART3 to DEBUG_LL ports
  ARM: S3C24XX: Add clkdev entry for camif-upll clock
  ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers
  ARM: sunxi: Add missing sun4i.dtsi file
  pinctrl: samsung: Do not initialise statics to 0
  ARM i.MX6: remove gate_mask from pllv3
  ARM i.MX6: Fix ethernet PLL clocks
  ARM i.MX6: rename PLLs according to datasheet
  ARM i.MX6: Add pwm support
  ARM i.MX51: Add pwm support
  ARM i.MX53: Add pwm support
  ARM: mx5: Replace clk_register_clkdev with clock DT lookup
  ...

Pull ARM SoC cleanups on various subarchitectures from Olof Johansson:
 "Cleanup patches for various ARM platforms and some of their associated
  drivers.  There's also a branch in here that enables Freescale i.MX to
  be part of the multiplatform support -- the first "big" SoC that is
  moved over (more multiplatform work comes in a separate branch later
  during the merge window)."

Conflicts fixed as per Olof, including a silent semantic one in
arch/arm/mach-omap2/board-generic.c (omap_prcm_restart() was renamed to
omap3xxx_restart(), and a new user of the old name was added).

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (189 commits)
  ARM: omap: fix typo on timer cleanup
  ARM: EXYNOS: Remove unused regs-mem.h file
  ARM: EXYNOS: Remove unused non-dt support for dwmci controller
  ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan
  ARM: OMAP3: cm-t3517: use GPTIMER for system clock
  ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER
  ARM: SAMSUNG: use devm_ functions for ADC driver
  ARM: EXYNOS: no duplicate mask/unmask in eint0_15
  ARM: S3C24XX: SPI clock channel setup is fixed for S3C2443
  ARM: EXYNOS: Remove i2c0 resource information and setting of device names
  ARM: Kirkwood: checkpatch cleanups
  ARM: Kirkwood: Fix sparse warnings.
  ARM: Kirkwood: Remove unused includes
  ARM: kirkwood: cleanup lsxl board includes
  ARM: integrator: use BUG_ON where possible
  ARM: integrator: push down SC dependencies
  ARM: integrator: delete static UART1 mapping
  ARM: integrator: delete SC mapping on the CP
  ARM: integrator: remove static CP syscon mapping
  ARM: integrator: remove static AP syscon mapping
  ...

Pull ARM SoC Header cleanups from Olof Johansson:
 "This is a collection of header file cleanups, mostly for OMAP and
  AT91, that keeps moving the platforms in the direction of
  multiplatform by removing the need for mach-dependent header files
  used in drivers and other places."

Fix up mostly trivial conflicts as per Olof.

* tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (106 commits)
  ARM: OMAP2+: Move iommu/iovmm headers to platform_data
  ARM: OMAP2+: Make some definitions local
  ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c
  ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h
  ARM: OMAP2+: Move iopgtable header to drivers/iommu/
  ARM: OMAP: Merge iommu2.h into iommu.h
  atmel: move ATMEL_MAX_UART to platform_data/atmel.h
  ARM: OMAP: Remove omap_init_consistent_dma_size()
  arm: at91: move at91rm9200 rtc header in drivers/rtc
  arm: at91: move reset controller header to arm/arm/mach-at91
  arm: at91: move pit define to the driver
  arm: at91: move at91_shdwc.h to arch/arm/mach-at91
  arm: at91: move board header to arch/arm/mach-at91
  arn: at91: move at91_tc.h to arch/arm/mach-at91
  arm: at91 move at91_aic.h to arch/arm/mach-at91
  arm: at91 move board.h to arch/arm/mach-at91
  arm: at91: move platfarm_data to include/linux/platform_data/atmel.h
  arm: at91: drop machine defconfig
  ARM: OMAP: Remove NEED_MACH_GPIO_H
  ARM: OMAP: Remove unnecessary mach and plat includes
  ...

Pull ARM SoC Non-critical bug fixes from Olof Johansson:
 "Simple bug fixes that were not considered important enough for
  inclusion into 3.7, especially those that arrived late during the
  merge window.

  There's also a MAINTAINERS update for the Renesas platforms in here,
  marking Simon Horman as a maintainer and changing the git url to his
  tree."

* tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  Update ARM/SHMOBILE section of MAINTAINERS
  ARM: Fix Kconfig symbols typo for LEDS
  ARM: pxa: add dummy SA1100 rtc clock in pxa25x
  ARM: pxa: fix pxa25x gpio wakeup setting
  ARM: OMAP4: PM: fix errata handling when CONFIG_PM=n
  ARM: cns3xxx: drop unnecessary symbol selection
  ARM: vexpress: fix ll debug code when building multiplatform
  ARM: OMAP4: retrigger localtimers after re-enabling gic
  ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX GIC control register change.
  ARM: OMAP4: PM: add errata support
  ARM: davinci: fix return value check by using IS_ERR in tnetv107x_devices_init()
  ARM: davinci: uncompress.h: bail out if uart not initialized
  ARM: davinci: serial.h: fix uart number in the comment
  ARM: davinci: dm644x evm: move pointer dereference below NULL check
  ARM: vexpress: Make the debug UART detection more specific

Pull ARM updates from Russell King:
 "Here's the updates for ARM for this merge window, which cover quite a
  variety of areas.

  There's a bunch of patch series from Will tackling various bugs like
  the PROT_NONE handling, ASID allocation, cluster boot protocol and
  ASID TLB tagging updates.

  We move to a build-time sorted exception table rather than doing the
  sorting at run-time, add support for the secure computing filter, and
  some updates to the perf code.  We also have sorted out the placement
  of some headers, fixed some build warnings, fixed some hotplug
  problems with the per-cpu TWD code."

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (73 commits)
  ARM: 7594/1: Add .smp entry for REALVIEW_EB
  ARM: 7599/1: head: Remove boot-time HYP mode check for v5 and below
  ARM: 7598/1: net: bpf_jit_32: fix sp-relative load/stores offsets.
  ARM: 7595/1: syscall: rework ordering in syscall_trace_exit
  ARM: 7596/1: mmci: replace readsl/writesl with ioread32_rep/iowrite32_rep
  ARM: 7597/1: net: bpf_jit_32: fix kzalloc gfp/size mismatch.
  ARM: 7593/1: nommu: do not enable DCACHE_WORD_ACCESS when !CONFIG_MMU
  ARM: 7592/1: nommu: prevent generation of kernel unaligned memory accesses
  ARM: 7591/1: nommu: Enable the strict alignment (CR_A) bit only if ARCH < v6
  ARM: 7590/1: /proc/interrupts: limit the display of IPIs to online CPUs only
  ARM: 7587/1: implement optimized percpu variable access
  ARM: 7589/1: integrator: pass the lm resource to amba
  ARM: 7588/1: amba: create a resource parent registrator
  ARM: 7582/2: rename kvm_seq to vmalloc_seq so to avoid confusion with KVM
  ARM: 7585/1: kernel: fix nr_cpu_ids check in DT logical map init
  ARM: 7584/1: perf: fix link error when CONFIG_HW_PERF_EVENTS is not selected
  ARM: gic: use a private mapping for CPU target interfaces
  ARM: kernel: add logical mappings look-up
  ARM: kernel: add cpu logical map DT init in setup_arch
  ARM: kernel: add device tree init map function
  ...

Implement destination MAC rule extension for L3/L4 rules in
flow steering. Usefull for vSwitch/macvlan configurations.
Signed-off-by: Yan Burman <yanb@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Get rid of full_mac, zero_mac in favour of
is_zero_ether_addr and is_broadcast_ether_addr.
Signed-off-by: Yan Burman <yanb@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add ability to specify destination MAC address for L3/L4 flow spec
in order to be able to specify action for different VM's under vSwitch
configuration. This change is transparent to older userspace.
Signed-off-by: Yan Burman <yanb@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch implents adding/deleting mdb entries via netlink.
Currently all entries are temp, we probably need a flag to distinguish
permanent entries too.

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As Stephen mentioned, we need to monitor the mdb
changes in user-space, so add notifications via netlink too.

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These symbols were exported for bonding device by commit 305d552a
("bonding: send IPv6 neighbor advertisement on failover").

It bacame obsolete by commit 7c899432 ("bonding, ipv4, ipv6, vlan: Handle
NETDEV_BONDING_FAILOVER like NETDEV_NOTIFY_PEERS") and removed by
commit 4f5762ec ("bonding: Remove obsolete source file 'bond_ipv6.c'").
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add netconf.h for use by iproute2.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull CIFS fixes from Steve French:
 "This includes a set of misc.  cifs fixes (most importantly some byte
  range lock related write fixes from Pavel, and some ACL and idmap
  related fixes from Jeff) but also includes the SMB2.02 dialect
  enablement, and a key fix for SMB3 mounts.

  Default authentication upgraded to ntlmv2 for cifs (it was already
  ntlmv2 for smb2)"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6: (43 commits)
  CIFS: Fix write after setting a read lock for read oplock files
  cifs: parse the device name into UNC and prepath
  cifs: fix up handling of prefixpath= option
  cifs: clean up handling of unc= option
  cifs: fix SID binary to string conversion
  fix "disabling echoes and oplocks" on SMB2 mounts
  Do not send SMB2 signatures for SMB3 frames
  cifs: deal with id_to_sid embedded sid reply corner case
  cifs: fix hardcoded default security descriptor length
  cifs: extra sanity checking for cifs.idmap keys
  cifs: avoid extra allocation for small cifs.idmap keys
  cifs: simplify id_to_sid and sid_to_id mapping code
  CIFS: Fix possible data coherency problem after oplock break to None
  CIFS: Do not permit write to a range mandatory locked with a read lock
  cifs: rename cifs_readdir_lookup to cifs_prime_dcache and make it void return
  cifs: Add CONFIG_CIFS_DEBUG and rename use of CIFS_DEBUG
  cifs: Make CIFS_DEBUG possible to undefine
  SMB3 mounts fail with access denied to some servers
  cifs: Remove unused cEVENT macro
  cifs: always zero out smb_vol before parsing options
  ...

Pull xfs update from Ben Myers:
 "There is plenty going on, including the cleanup of xfssyncd, metadata
  verifiers, CRC infrastructure for the log, tracking of inodes with
  speculative allocation, a cleanup of xfs_fs_subr.c, fixes for
  XFS_IOC_ZERO_RANGE, and important fix related to log replay (only
  update the last_sync_lsn when a transaction completes), a fix for
  deadlock on AGF buffers, documentation and comment updates, and a few
  more cleanups and fixes.

  Details:
   - remove the xfssyncd mess
   - only update the last_sync_lsn when a transaction completes
   - zero allocation_args on the kernel stack
   - fix AGF/alloc workqueue deadlock
   - silence uninitialised f.file warning
   - Update inode alloc comments
   - Update mount options documentation
   - report projid32bit feature in geometry call
   - speculative preallocation inode tracking
   - fix attr tree double split corruption
   - fix broken error handling in xfs_vm_writepage
   - drop buffer io reference when a bad bio is built
   - add more attribute tree trace points
   - growfs infrastructure changes for 3.8
   - fs/xfs/xfs_fs_subr.c die die die
   - add CRC infrastructure
   - add CRC checks to the log
   - Remove description of nodelaylog mount option from xfs.txt
   - inode allocation should use unmapped buffers
   - byte range granularity for XFS_IOC_ZERO_RANGE
   - fix direct IO nested transaction deadlock
   - fix stray dquot unlock when reclaiming dquots
   - fix sparse reported log CRC endian issue"

Fix up trivial conflict in fs/xfs/xfs_fsops.c due to the same patch
having been applied twice (commits eaef8543 and 1375cb65: "xfs:
growfs: don't read garbage for new secondary superblocks") with later
updates to the affected code in the XFS tree.

* tag 'for-linus-v3.8-rc1' of git://oss.sgi.com/xfs/xfs: (78 commits)
  xfs: fix sparse reported log CRC endian issue
  xfs: fix stray dquot unlock when reclaiming dquots
  xfs: fix direct IO nested transaction deadlock.
  xfs: byte range granularity for XFS_IOC_ZERO_RANGE
  xfs: inode allocation should use unmapped buffers.
  xfs: Remove the description of nodelaylog mount option from xfs.txt
  xfs: add CRC checks to the log
  xfs: add CRC infrastructure
  xfs: convert buffer verifiers to an ops structure.
  xfs: connect up write verifiers to new buffers
  xfs: add pre-write metadata buffer verifier callbacks
  xfs: add buffer pre-write callback
  xfs: Add verifiers to dir2 data readahead.
  xfs: add xfs_da_node verification
  xfs: factor and verify attr leaf reads
  xfs: factor dir2 leaf read
  xfs: factor out dir2 data block reading
  xfs: factor dir2 free block reading
  xfs: verify dir2 block format buffers
  xfs: factor dir2 block read operations
  ...

Pull dlm updates from David Teigland:
 "This set fixes some conditions in which value blocks are invalidated,
  and includes two trivial cleanups."

* tag 'dlm-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: fix lvb invalidation conditions
  fs/dlm: remove CONFIG_EXPERIMENTAL
  dlm: remove unused variable in *dlm_lowcomms_get_buffer()

Pull cgroup changes from Tejun Heo:
 "A lot of activities on cgroup side.  The big changes are focused on
  making cgroup hierarchy handling saner.

   - cgroup_rmdir() had peculiar semantics - it allowed cgroup
     destruction to be vetoed by individual controllers and tried to
     drain refcnt synchronously.  The vetoing never worked properly and
     caused good deal of contortions in cgroup.  memcg was the last
     reamining user.  Michal Hocko removed the usage and cgroup_rmdir()
     path has been simplified significantly.  This was done in a
     separate branch so that the memcg people can base further memcg
     changes on top.

   - The above allowed cleaning up cgroup lifecycle management and
     implementation of generic cgroup iterators which are used to
     improve hierarchy support.

   - cgroup_freezer updated to allow migration in and out of a frozen
     cgroup and handle hierarchy.  If a cgroup is frozen, all descendant
     cgroups are frozen.

   - netcls_cgroup and netprio_cgroup updated to handle hierarchy
     properly.

   - Various fixes and cleanups.

   - Two merge commits.  One to pull in memcg and rmdir cleanups (needed
     to build iterators).  The other pulled in cgroup/for-3.7-fixes for
     device_cgroup fixes so that further device_cgroup patches can be
     stacked on top."

Fixed up a trivial conflict in mm/memcontrol.c as per Tejun (due to
commit bea8c150 ("memcg: fix hotplugged memory zone oops") in master
touching code close to commit 2ef37d3f ("memcg: Simplify
mem_cgroup_force_empty_list error handling") in for-3.8)

* 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (65 commits)
  cgroup: update Documentation/cgroups/00-INDEX
  cgroup_rm_file: don't delete the uncreated files
  cgroup: remove subsystem files when remounting cgroup
  cgroup: use cgroup_addrm_files() in cgroup_clear_directory()
  cgroup: warn about broken hierarchies only after css_online
  cgroup: list_del_init() on removed events
  cgroup: fix lockdep warning for event_control
  cgroup: move list add after list head initilization
  netprio_cgroup: allow nesting and inherit config on cgroup creation
  netprio_cgroup: implement netprio[_set]_prio() helpers
  netprio_cgroup: use cgroup->id instead of cgroup_netprio_state->prioidx
  netprio_cgroup: reimplement priomap expansion
  netprio_cgroup: shorten variable names in extend_netdev_table()
  netprio_cgroup: simplify write_priomap()
  netcls_cgroup: move config inheritance to ->css_online() and remove .broken_hierarchy marking
  cgroup: remove obsolete guarantee from cgroup_task_migrate.
  cgroup: add cgroup->id
  cgroup, cpuset: remove cgroup_subsys->post_clone()
  cgroup: s/CGRP_CLONE_CHILDREN/CGRP_CPUSET_CLONE_CHILDREN/
  cgroup: rename ->create/post_create/pre_destroy/destroy() to ->css_alloc/online/offline/free()
  ...

Pull percpu changes from Tejun Heo:
 "Nothing exciting here either.  Joonsoo's is almost cosmetic.  Cyrill's
  patch fixes "percpu_alloc" early kernel param handling so that the
  kernel doesn't crash when the parameter is specified w/o any argument."

* 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  mm, percpu: Make sure percpu_alloc early parameter has an argument
  percpu: make pcpu_free_chunk() use pcpu_mem_free() instead of kfree()

Pull workqueue changes from Tejun Heo:
 "Nothing exciting.  Just two trivial changes."

* 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: add WARN_ON_ONCE() on CPU number to wq_worker_waking_up()
  workqueue: trivial fix for return statement in work_busy()

Pull thermal management update from Zhang Rui:
 "Highlights:

   - Introduction of thermal policy support, together with three new
     thermal governors, including step_wise, user_space, fire_share.

   - Introduction of ST-Ericsson db8500_thermal driver and ST-Ericsson
     db8500_cpufreq_cooling driver.

   - Thermal Kconfig file and Makefile refactor.

   - Fixes for generic thermal layer, generic cpucooling, rcar thermal
     driver and Exynos thermal driver."

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (36 commits)
  Thermal: Fix DEFAULT_THERMAL_GOVERNOR
  Thermal: fix a NULL pointer dereference when generic thermal layer is built as a module
  thermal: rcar: add rcar_zone_to_priv() macro
  thermal: rcar: fixup the unit of temperature
  thermal: cpu cooling: allow module builds
  thermal: cpu cooling: use const parameter while registering
  Thermal: Add ST-Ericsson DB8500 thermal properties and platform data.
  Thermal: Add ST-Ericsson DB8500 thermal driver.
  drivers/thermal/Makefile refactor
  Exynos: Add missing dependency
  Refactor drivers/thermal/Kconfig
  thermal: cpu_cooling: Make 'notify_device' static
  Thermal: Remove the cooling_cpufreq_list.
  Thermal: fix bug of counting cpu frequencies.
  Thermal: add indent for code alignment.
  thermal: rcar_thermal: remove explicitly used devm_kfree/iounap()
  thermal: user_space: Add missing static storage class specifiers
  thermal: fair_share: Add missing static storage class specifiers
  thermal: step_wise: Add missing static storage class specifiers
  Thermal: Fix oops and unlocking in thermal_sys.c
  ...

Pull regmap updates from Mark Brown:
 "Quite a few enhancements this time around, helpers and diagnostics for
  the most part which is good to see:

   - Addition of table based lookups for the register access checks from
     Davide Ciminaghi, making life easier for drivers with big blocks of
     similar registers.
   - Allow drivers to get the irqdomain for regmap irq_chips, allowing
     the domain to be used with other APIs.
   - Debug improvements for paged register maps.
   - Performance improvments for some of the diagnostic infrastructure,
     very helpful for devices with large register maps."

* tag 'regmap-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: debugfs: Cache offsets of valid regions for dump
  regmap: debugfs: Factor out initial seek
  regmap: debugfs: Avoid overflows for very small reads
  regmap: Cache register and value sizes for debugfs
  regmap: introduce tables for readable/writeable/volatile/precious checks
  regmap: core: Report registers in hex when we can't cache
  regmap: Fix printing of size_t variable
  regmap: make lock/unlock functions customizable
  regmap: silence GCC warning
  regmap: Split raw writes that cross window boundaries
  regmap: Make return code checks consistent
  regmap: Factor range lookup out of page selection
  regmap: Provide debugfs read of register ranges
  regmap: Factor out debugfs register read
  regmap: Allow ranges to be named
  regmap: When we sanity check during range adds say what errors we find
  regmap: Rename n_ranges to num_ranges
  regmap: irq: Allow users to retrieve the irq_domain

Pull ACPI5 error injection fix from Tony Luck:
 "Trivial fix for error injection code using ACPI5 version of EINJ"

* tag 'please-pull-einj-fix-for-acpi5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  ACPI, APEI, EINJ: Add missed ACPI5 support for error trigger table

Pull pstore fixes from Tony Luck:
 "Patch series to allow EFI variable backend to pstore to hold multiple
  records."

* tag 'please-pull-pstore_mevent' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  efi_pstore: Add a format check for an existing variable name at erasing time
  efi_pstore: Add a format check for an existing variable name at reading time
  efi_pstore: Add a sequence counter to a variable name
  efi_pstore: Add ctime to argument of erase callback
  efi_pstore: Remove a logic erasing entries from a write callback to hold multiple logs
  efi_pstore: Add a logic erasing entries to an erase callback
  efi_pstore: Check remaining space with QueryVariableInfo() before writing data

Pull ia64 fix from Tony Luck:
 "Miscellaneous ia64 fix for 3.8.  Just need to avoid a pending
  namespace collision from other work being merged."

* tag 'please-pull-misc-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  [IA64] Resolve name space collision for cache_show()

Pull ARM64 updates from Catalin Marinas:

 - Generic execve, kernel_thread, fork/vfork/clone.

 - Preparatory patches for KVM support (initialising EL2 mode for later
   installing KVM support, hypervisor stub).

 - Signal handling corner case fix (alternative signal stack set up for
   a SEGV handler, which is raised in response to RLIMIT_STACK being
   reached).

 - Sub-nanosecond timer error fix.

* tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: (30 commits)
  arm64: Update the MAINTAINERS entry
  arm64: compat for clock_adjtime(2) is miswired
  arm64: move FP-SIMD save/restore code to a macro
  arm64: hyp: initialize vttbr_el2 to zero
  arm64: add hypervisor stub
  arm64: record boot mode when entering the kernel
  arm64: move vector entry macro to assembler.h
  arm64: add AArch32 execution modes to ptrace.h
  arm64: expand register mapping between AArch32 and AArch64
  arm64: generic timer: use virtual counter instead of physical at EL0
  arm64: vdso: defer shifting of nanosecond component of timespec
  arm64: vdso: rework __do_get_tspec register allocation and return shift
  arm64: vdso: check sequence counter even for coarse realtime operations
  arm64: vdso: fix clocksource mask when extracting bottom 56 bits
  ARM64: Remove incorrect Kconfig symbol HAVE_SPARSE_IRQ
  Documentation: Fixes a word in Documentation/arm64/memory.txt
  arm64: Make !dirty ptes read-only
  arm64: Convert empty flush_cache_{mm,page} functions to static inline
  arm64: signal: let the compiler inline compat_get_sigframe
  arm64: signal: return struct rt_sigframe from get_sigframe
  ...

Conflicts:
	arch/arm64/include/asm/unistd32.h

The declarations from MN10300's pci_iomap() was removed by commit
34f1bdee but asm-generic/pci_iomap.h wasn't
then #included from asm/io.h.
Signed-off-by: David Howells <dhowells@redhat.com>

Get rid of an unused variable in pcibios_fixup_device_resources() which leads
to the following warning:

arch/mn10300/unit-asb2305/pci.c: In function 'pcibios_fixup_device_resources':
arch/mn10300/unit-asb2305/pci.c:324:24: warning: unused variable 'region' [-Wunused-variable]

Whilst we're at it, merge the two integer variable declarations into one line.
Signed-off-by: David Howells <dhowells@redhat.com>

ASB2305 PCI code needs to #include linux/irq.h for XIRQ1 so that it can set
the CPU interrupt priority level on the PCI interrupt.
Signed-off-by: David Howells <dhowells@redhat.com>