- 30 Oct, 2018 1 commit
-
-
Chris Wilson authored
Record the scratch PTE encoding upon creation rather than recomputing the bits everytime. This is important for the next patch where we forgo having a valid scratch page with which we may compute the bits and so require keeping the PTE value instead. v2: Fix up scrub_64K to use scratch_pte as well. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181029182721.29568-1-chris@chris-wilson.co.uk
-
- 29 Oct, 2018 15 commits
-
-
Dhinakaran Pandiyan authored
intel_fb_pitch_limit() has the parameters pixel_format and fb_modifier switched in their positions. The parameters are however used correctly, but change the order for consistency. Also use kernel data types for both parameters. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181026195342.16828-1-dhinakaran.pandiyan@intel.com
-
Dhinakaran Pandiyan authored
The PLANE_AUX_OFFSET mmio does not exist on ICL, do not program it. We'll still calculate the aux offset as it is required for adjusing x-y offsets. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Dhinakaran Pandiyan authored
A framebuffer can comprise surfaces with distinct tiling formats, making checks against modifier alone insufficient. Make use of a function to identify a linear surface based on both modifier and color plane. v2: Typo fix v3: remove 'inline' from function definition (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Dhinakaran Pandiyan authored
The bits weren't defined in descending order. v2: Move definitions in a separate patch (Manasi) Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181005185643.31660-2-dhinakaran.pandiyan@intel.com
-
Dhinakaran Pandiyan authored
The shifts for VSC_SELECT bits are wrong, fix it. Good thing is the definitions are unused. v2: Moves definitions in another patch (Manasi) Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Fixes: 7af2be6d ("drm/i915/icl: Add VIDEO_DIP registers") Signed-off-by:
-
Rodrigo Vivi authored
The specially case for SKL for not controlled sagv is already taken care inside intel_enable_sagv, so there's no need to duplicate the check here. v2: Go one step further and remove skl special case. (Jani) v3: Separate runtime status handle from has_sagv flag. v4: Go back and accept simple Jani proposed solution. Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181026200317.21726-1-rodrigo.vivi@intel.com
-
Chris Wilson authored
The vm of two contexts are supposed to be independent, such that a stray write by one cannot be detected by another. Normally the GTT is filled explicitly by userspace, but the space in between objects is filled with a scratch page -- and that scratch page should not be able to form an inter-context backchannel. Signed-off-by:
-
Rodrigo Vivi authored
While checking the opportunity to add a display_gen check to allow glk and cnl to be on same bucket I noticed these FIXME cases here. So I got the confirmation from HW architect that we actually never needed this workaround. "GLK supports 2 pixel per clock, so pixel clock can be up to 2 * cdclk." So, this reverts commit 97f55ca5 ("drm/i915/glk: limit pixel clock to 99% of cdclk workaround") Fixes: 97f55ca5 ("drm/i915/glk: limit pixel clock to 99% of cdclk workaround") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Clinton Taylor <clinton.a.taylor@intel.com> Cc: Arthur J Runyan <arthur.j.runyan@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
commit ac657f64 ("drm/i915: Introduce IS_GEN macro") introduced GEN_FOREVER that was never used. My first attempt was to rename it to FOREVER since GEN is already part of the macro. Then I used coccinelle to change all -INTEL_GEN(e1) >= e2 +INTEL_GEN_RANGE(e1, e2, FOREVER) -INTEL_GEN(e1) <= e2 +INTEL_GEN_RANGE(e1, 0, e2) and I liked it. However I didn't like very much the remaining INTEL_GEN(dev_priv) < n and: INTEL_GEN(e1) < n INTEL_GEN_RANGE(e1, 0, n - 1) didn't make much sense either. So INTEL_GEN use for > or < seems a better unified way for unlimited bounds. So, no reason to keep GEN_FOREVER here. Let's kill before someone start using it. v2: Remove remaining GEN_FOREVER forgotten in a comment. (Daniel) Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181026195143.20353-2-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
Whenever possible we should stick with IS_GEN<n> checks. Bitmaks has been introduced on commit ae7617f0 ("drm/i915: Allow optimized platform checks") for efficiency. Let's stick with it whenever possible. This patch was generated with coccinelle: spatch -sp_file is_gen.cocci *{c,h} --in-place is_gen.cocci: @gen2@ expression e; @@ -INTEL_GEN(e) == 2 +IS_GEN2(e) @gen3@ expression e; @@ -INTEL_GEN(e) == 3 +IS_GEN3(e) @gen4@ expression e; @@ -INTEL_GEN(e) == 4 +IS_GEN4(e) @gen5@ expression e; @@ -INTEL_GEN(e) == 5 +IS_GEN5(e) @gen6@ expression e; @@ -INTEL_GEN(e) == 6 +IS_GEN6(e) @gen7@ expression e; @@ -INTEL_GEN(e) == 7 +IS_GEN7(e) @gen8@ expression e; @@ -INTEL_GEN(e) == 8 +IS_GEN8(e) @gen9@ expression e; @@ -INTEL_GEN(e) == 9 +IS_GEN9(e) @gen10@ expression e; @@ -INTEL_GEN(e) == 10 +IS_GEN10(e) @gen11@ expression e; @@ -INTEL_GEN(e) == 11 +IS_GEN11(e) Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
-
Ramalingam C authored
Intel HDCP2.2 registers are defined with addr offsets and bit details. v2: Replaced the arith calc with _PICK [Sean Paul] v3: No changes. v4: %s/HDCP2_CTR_DDI/HDCP2_CTL_DDI [Uma] v5: Added parentheses for the parameters of macro. v6: No changes v7: No changes Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Reviewed-by:
Uma Shankar <uma.shankar@intel.com> Signed-off-by:
-
Ramalingam C authored
This patch adds HDCP register definitions for HDMI and DP HDCP adaptations. HDMI specific HDCP2.2 register definitions are added into drm_hdcp.h, where as HDCP2.2 register offsets in DPCD offsets are defined at drm_dp_helper.h. v2: bit_field definitions are replaced by macros. [Tomas and Jani] v3: No Changes. v4: Comments style and typos are fixed [Uma] v5: Fix for macros. v6: Adds _MS to the timeouts to represent units [Sean Paul] v7: Macro DP_HDCP_2_2_REG_EKH_KM_OFFSET renamed [Uma] Redundant macro is removed [Uma] Signed-off-by:
-
Ramalingam C authored
This patch defines the hdcp2.2 protocol messages for authentication. v2: bit_fields are removed. Instead bitmasking used. [Tomas and Jani] prefix HDCP_2_2_ is added to the macros. [Tomas] v3: No Changes. v4: Style and spellings are fixed [Uma] v5: Fix for macros. v6: comment for Type is improved [Sean Paul] v7: %s/HDCP_2_2_LPRIME_HALF_LEN/HDCP_2_2_V_PRIME_HALF_LEN [Uma] %s/uintxx_t/uxx v8: %s/eceiver_id/receiver_id Signed-off-by:
-
Ramalingam C authored
As a policy, this change considers all I915 programming failures and HW failures as ERRORS. Where as all HDCP failures due to the sink is considered as DEBUG logs. Signed-off-by:
-
Ramalingam C authored
Considering significant number of HDCP specific variables, it will be clean to have separate struct for HDCP. New structure called intel_hdcp is added within intel_connector. v2: struct hdcp statically allocated. [Sean Paul] enable and disable function parameters are retained.[Sean Paul] v3: No Changes. v4: Commit msg is rephrased [Uma] v5: Comment for mutex definition. v6: hdcp_ prefix from all intel_hdcp members are removed [Sean Paul] inline function intel_hdcp_to_connector is defined [Sean Paul] v7: %s/uint64_t/u64 v8: Rebased Signed-off-by:
-
- 26 Oct, 2018 6 commits
-
-
Chris Wilson authored
A danger encountered when resetting the seqno (using debugfs/i915_next_seqno) is that as we change the breadcrumb stored in the HWSP, it may be inspected by the signaler thread leading to confusion in our sanity checks. <0> [136.331342] i915/sig-347 3..s1 136336154us : execlists_submission_tasklet: rcs0 awake?=1, active=5 <0> [136.331373] i915/sig-347 3d.s2 136336155us : process_csb: rcs0 cs-irq head=5, tail=0 <0> [136.331402] i915/sig-347 3d.s2 136336155us : process_csb: rcs0 csb[0]: status=0x00000018:0x00000002, active=0x5 <0> [136.331434] i915/sig-347 3d.s2 136336156us : process_csb: rcs0 out[0]: ctx=2.1, global=219 (fence 46:8455) (current 219), prio=0 <0> [136.331466] i915/sig-347 3d.s2 136336156us : process_csb: rcs0 completed ctx=2 <0> [136.332027] gem_exec-1049 0.... 136336246us : reset_all_global_seqno.part.5: rcs0 seqno 219 (current 219) -> -43 <0> [136.332056] gem_exec-1049 0.... 136336251us : reset_all_global_seqno.part.5: bcs0 seqno 183 (current 183) -> -43 <0> [136.332085] gem_exec-1049 0.... 136336255us : reset_all_global_seqno.part.5: vcs0 seqno 191 (current 191) -> -43 <0> [136.332114] gem_exec-1049 0.... 136336259us : reset_all_global_seqno.part.5: vcs1 seqno 180 (current 180) -> -43 <0> [136.332143] gem_exec-1049 0.... 136336262us : reset_all_global_seqno.part.5: vecs0 seqno 212 (current 212) -> -43 <0> [136.332174] i915/sig-347 3.... 136336280us : intel_breadcrumbs_signaler: intel_breadcrumbs_signaler:673 GEM_BUG_ON(!i915_request_completed(rq)) Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181024104939.2861-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Use the live_test struct to record the reset count before and compare it at the end of the test to assert that no mystery hang occurred during the test. v2: Check per-engine resets as well Signed-off-by:
-
Tvrtko Ursulin authored
Upcoming GuC code will need to read the fused off engine masks as well, and will also want to have them as enabled instead of disabled masks. To consolidate the read-out place we can store them in this fashion inside INTEL_INFO so they can be easily referenced in the future. Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181018104106.30147-1-tvrtko.ursulin@linux.intel.com
-
Chris Wilson authored
Beware mixing unsigned long constants and 64b values, as on 32b the constant will be zero extended and discard the high 32b when used as a mask! Reported-by:
Sergii Romantsov <sergii.romantsov@globallogic.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108282Signed-off-by:
-
Chris Wilson authored
Since we use a 64b virtual GTT irrespective of the system, we want to ensure that the GTT computations remains 64b even on 32b systems, including treatment of huge virtual pages. No code generation changes on 64b: Reported-by:
-
Clint Taylor authored
HDMI 2.0 594Mhz modes were incorrectly selecting 25.200Mhz Automatic N value mode instead of HDMI specification values. V2: Fix 88.2 Hz N value Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by:
-
- 25 Oct, 2018 1 commit
-
-
Imre Deak authored
In order to ensure that our system suspend and resume callbacks are called in the correct order wrt. those of the HDA driver add a device link to the HDA driver during audio component binding time. With i915 as the supplier and HDA as the consumer the PM framework will guarantee the HDA->i915 suspend (and shutdown) and i915->HDA resume order. Atm, the lack of this ordering is not a problem, since all the i915 suspend/resume steps that need to be ordered wrt. the HDA driver's suspend/resume steps are separated out to the i915 suspend_late/resume_early hooks. That will change in a follow-up patchset where we'll need this ordering guarantee for steps that are in the i915 suspend/resume hooks (and which can't be moved to suspend_late/resume_early for other reasons). So this patch is a preparation for that follow-up patchset. The change also allows us to move towards removing the i915 suspend_late/resume_early hooks alltogether. Since we only need to ensure the ordering during suspend/resume and not during driver probing create the link with DL_FLAG_STATELESS. Since the probe time ordering has to be optional we use the component framework for that. Similarly for runtime PM we depend on the audio driver getting/putting an i915 runtime PM reference whenever it needs it (along with the proper i915 display power domain) via the audio component ops get_power / put_power hooks. So we create the device link without DL_FLAG_PM_RUNTIME. v2: (Ville) - Add a note to the commit message about not using the device link runtime PM ordering. - Handle the error return from device_link_add(). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
- 24 Oct, 2018 15 commits
-
-
Chris Wilson authored
make W=1 caught the implicit prototypes (as would sparse): drivers/gpu/drm/i915/intel_sprite.c:462:1: error: no previous prototype for ‘skl_update_plane’ [-Werror=missing-prototypes] skl_update_plane(struct intel_plane *plane, ^~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/intel_sprite.c:487:1: error: no previous prototype for ‘skl_disable_plane’ [-Werror=missing-prototypes] skl_disable_plane(struct intel_plane *plane, struct intel_crtc *crtc) ^~~~~~~~~~~~~~~~~ Fixes: 1e364f90 ("drm/i915/gen11: Program the Y and UV plane for planar mode correctly, v3.") Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181024105402.18915-1-chris@chris-wilson.co.uk
-
Lionel Landwerlin authored
Forgot to add the description of this option in a previous commit. Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: cd956bfc ("drm/i915/perf: add a parameter to control the size of OA buffer") Reviewed-by:
-
Ville Syrjälä authored
The 16Gb DIMM w/a is not applicable to BXT or GLK. Limit it to the appropriate platforms. This was especially harsh on GLK since we don't even try to read the DIMM information on that platforms, hence valid_dimm was always false and thus we always tried to apply the w/a. Furthermore the w/a pushed the level 0 latency above the level 1 latency, which doesn't really make sense. v2: Do the check when populating is_16gb_dimm (Mahesh) Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 86b59287 ("drm/i915: Implement 16GB dimm wa for latency level-0") Signed-off-by:
Mahesh Kumar <mahesh1.sh.kumar@gmail.com>
-
Maarten Lankhorst authored
Now that we implemented support for planar formats on gen11, we can finally advertise it. Changes since v1: - Re-add change to skl_plane_has_planar(), was lost in rebase noise. Signed-off-by:
-
Maarten Lankhorst authored
The UV plane is the master plane that does all color correction etc. It needs to be programmed with the dimensions for color plane 1 (UV). The Y plane just feeds the Y pixels to it. Program the scaler from the master only, and set PLANE_CTL_YUV420_Y_PLANE on the slave plane. Changes since v1: - Make a common skl_program_plane, and use it for both plane updates. Changes since v2: - Make color_plane explicit, to clarify skl_update_plane(). (Ville) Signed-off-by:
-
Maarten Lankhorst authored
We configure the chroma upsampler with the same chroma siting as used by the scaler for consistency, the chroma upsampler is used instead of the scaler for YUV 4:2:0 on ICL's HDR planes. Signed-off-by:
-
Maarten Lankhorst authored
The first 3 planes (primary, sprite 0 and 1) have a dedicated chroma upsampler to upscale YUV420 to YUV444 and the scaler should only be used for upscaling. Because of this we shouldn't program the scalers in planar mode if NV12 and the chroma upsampler are used. Instead program the scalers like on normal planes. Sprite 2 and 3 have no dedicated scaler, and need to program the selected Y plane in the scaler mode. Changes since v1: - Make the comment less confusing. Changes since v2: - Fix checkpatch warning (Matt) - gen10- -> Pre-gen11 (Ville) - PS_SCALER_MODE_PACKED -> PS_SCALER_MODE_NORMAL. (Matt) - Add comment about scaler mode in intel_atomic_setup_scaler(). (Matt) - Rename need_scaling to need_scaler. (Matt) - Move the crtc need_scaling check to skl_update_scaler_crtc(). Signed-off-by:
-
Maarten Lankhorst authored
Skylake style watermarks program the UV parameters into wm->uv_wm, and have a separate DDB allocation for UV blocks into the same plane. Gen11 watermarks have a separate plane for Y and UV, with separate mechanisms. The simplest way to make it work is to keep the current way of programming watermarks and calculate the Y and UV plane watermarks from the master plane. Changes since v1: - Constify crtc_state where possible. - Make separate paths for planar formats in skl_build_pipe_wm() (Matt) - Make separate paths for calculating total data rate. (Matt) - Make sure UV watermarks are unused on gen11+ by adding a WARN. (Matt) Signed-off-by:
-
Maarten Lankhorst authored
To make NV12 working on icl, we need to update 2 planes simultaneously. I've chosen to do this in the CRTC step after plane validation is done, so we know what planes are (in)visible. The linked Y plane will get updated in intel_plane_update_planes_on_crtc(), by the call to update_slave, which gets the master's plane_state as argument. The link requires both planes for atomic_update to work, so make sure skl_ddb_add_affected_planes() adds both states. Changes since v1: - Introduce icl_is_nv12_y_plane(), instead of hardcoding sprite numbers. - Put all the state updating login in intel_plane_atomic_check_with_state(). - Clean up changes in intel_plane_atomic_check(). Changes since v2: - Fix intel_atomic_get_old_plane_state() to actually return old state. - Move visibility changes to preparation patch. - Only try to find a Y plane on gen11, earlier platforms only require a single plane. Changes since v3: - Fix checkpatch warning about to_intel_crtc() usage. - Add affected planes from icl_add_linked_planes() before check_planes(), it's a cleaner way to do this. (Ville) Changes since v4: - Clear plane links in icl_check_nv12_planes() for clarity. - Only pass crtc_state to icl_check_nv12_planes(). - Use for_each_new_intel_plane_in_state() in icl_check_nv12_planes. - Rename aux to linked. (Ville) Signed-off-by:
-
Maarten Lankhorst authored
Gen11 supports 7 planes + 1 cursor on each pipe. Bump I915_MAX_PLANES to 8, and set num_sprites correctly. Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181018115134.9061-3-maarten.lankhorst@linux.intel.com
-
Maarten Lankhorst authored
On gen11, we can definitely smash the 32-bits barrier with just a when we enable all planes in the next patch. Changes since v1: - Use div64_u64 (ickle). Signed-off-by:
-
Ramalingam C authored
When a HDCP authentication is in progress, if the display sink is hot unplugged, all DDC/AUX transaction related to the HDCP authentication will fail. This patch moves those kind of HDCP DDC/AUX failures into the debug logs instead of errors. v2: Bksv invalid state is provided as debug msg Signed-off-by:
-
Ramalingam C authored
Add a debugfs entry for providing the hdcp capabilities of the sink connected to the HDCP capable connectors. v2: Squashed the sink's hdcp capability into this patch. [Daniel] Signed-off-by:
-
Ramalingam C authored
HDCP check link is invoked only on CP_IRQ detection, instead of all short pulses. v3: No Changes. v4: Added sean in cc and collected the reviewed-by received. v5: No Change. v6: No Change. v7: No Change. v8: Rebased. Signed-off-by:
-
Ramalingam C authored
For reusability purpose, this patch implements the hdcp1.4 bksv's read and validation as a functions. For detecting the HDMI panel's HDCP capability this fucntions will be used. v2: Rebased. v3: No Changes. v4: inline tag is removed with modified error msg. v5: No Changes. v6: No Changes. v7: Realigned the code. Signed-off-by:
-
- 23 Oct, 2018 2 commits
-
-
Chris Wilson authored
Propagate the timeout on transferring the fw back to the caller where it may act upon it, usually by restarting the xfer before failing. v2: Simplify the wait to only wait upon the guc signaling completion, with an assertion that the fw xfer must have completed for it to be ready! Testcase: igt/drv_selftest/live_hangcheck Signed-off-by:
-
Ville Syrjälä authored
Remove the local lvds fixed mode pointer from the sdvo encoder structure and instead utilize intel_panel like everyone else. v2: intel_sdvo_destroy() is gone Signed-off-by:
-
