- 18 Apr, 2019 4 commits
-
-
Steven Price authored
Since panfrost has a 'select' on IOMMU_IO_PGTABLE_LPAE we must depend on the same set of flags. Otherwise IOMMU_IO_PGTABLE_LPAE will be forced on even though it cannot build (no support for cmpxchg64). This fixes the following warning from kconfig: WARNING: unmet direct dependencies detected for IOMMU_IO_PGTABLE_LPAE Depends on [n]: IOMMU_SUPPORT [=y] && (ARM || ARM64 || COMPILE_TEST [=y] && !GENERIC_ATOMIC64 [=y]) Selected by [y]: - DRM_PANFROST [=y] && HAS_IOMEM [=y] && DRM [=y] && (ARM || ARM64 || COMPILE_TEST [=y]) && MMU [=y] Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Steven Price <steven.price@arm.com> Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190417152928.10790-1-steven.price@arm.com
-
Steven Price authored
Fix sparse warnings: drivers/gpu/drm/panfrost/panfrost_devfreq.c:133:5: warning: symbol 'panfrost_devfreq_init' was not declared. Should it be static? drivers/gpu/drm/panfrost/panfrost_devfreq.c:168:6: warning: symbol 'panfrost_devfreq_resume' was not declared. Should it be static? drivers/gpu/drm/panfrost/panfrost_devfreq.c:182:6: warning: symbol 'panfrost_devfreq_suspend' was not declared. Should it be static? drivers/gpu/drm/panfrost/panfrost_devfreq.c:212:6: warning: symbol 'panfrost_devfreq_record_transition' was not declared. Should it be static? Signed-off-by:
-
YueHaibing authored
Fix sparse warning: drivers/gpu/drm/panfrost/panfrost_gem.c:17:6: warning: symbol 'panfrost_gem_free_object' was not declared. Should it be static? Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by:
-
Vicente Bergas authored
As explained by Robin Murphy: > the IOMMU shutdown disables paging, so if the VOP is still > scanning out then that will result in whatever IOVAs it was using now going > straight out onto the bus as physical addresses. We had a more radical approach before in commit 7f3ef5de ("drm/rockchip: Allow driver to be shutdown on reboot/kexec") but that resulted in new warnings and oopses on shutdown on rk3399 chromeos devices. So second try is resurrecting Vicentes shutdown change which should achieve the same result but in a less drastic way. Fixes: 63238173 ("Revert "drm/rockchip: Allow driver to be shutdown on reboot/kexec"") Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Brian Norris <briannorris@chromium.org> Cc: Doug Anderson <dianders@chromium.org> Cc: stable@vger.kernel.org Suggested-by:
JeffyChen <jeffy.chen@rock-chips.com> Suggested-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Vicente Bergas <vicencb@gmail.com> [adapted commit message to explain the history] Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Tested-by:
Brian Norris <briannorris@chromium.org> Tested-by:
Douglas Anderson <dianders@chromium.org> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190402113753.10118-1-heiko@sntech.de
-
- 17 Apr, 2019 8 commits
-
-
Jonathan Marek authored
Add ACX467AKM-7 4.95" 1080×1920 LCD panel that is found on the LG Nexus 5 (hammerhead) phone. Signed-off-by:
Jonathan Marek <jonathan@marek.ca> [masneyb@onstation.org: checkpatch fixes; rename jdi,1080p-hammerhead binding to lg,acx467akm-7.] Signed-off-by:
Brian Masney <masneyb@onstation.org> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Brian Masney authored
Add binding for the LG ACX467AKM-7 4.95" 1080×1920 LCD panel that is found on the LG Nexus 5 (hammerhead) phone. This appears to be a JDI panel based on some Internet searches, however a specific model number could not be found. I disassembled an old Nexus 5 with a broken screen and the LG part number is the only model number present on the back of the panel, so I think that is probably the best ID to use. Signed-off-by:
-
Linus Walleij authored
This adds the device tree bindings for the ST-Ericsson Multi Channel Display Engine MCDE as found in the U8500 SoCs. Cc: devicetree@vger.kernel.org Reviewed-by:
-
Neil Armstrong authored
The Amlogic SoCs Canvas buffers stride must be aligned on 64bytes and overall size should be aligned on PAGE width. Adds a custom dumb_create op to adds these requirements. Fixes: bbbe775e ("drm: Add support for Amlogic Meson Graphic Controller") Suggested-by:
Sky Zhou <sky.zhou@amlogic.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
-
YueHaibing authored
Fix sparse warnings: drivers/gpu/drm/meson/meson_viu.c:93:6: warning: symbol 'meson_viu_set_g12a_osd1_matrix' was not declared. Should it be static? drivers/gpu/drm/meson/meson_viu.c:121:6: warning: symbol 'meson_viu_set_osd_matrix' was not declared. Should it be static? drivers/gpu/drm/meson/meson_viu.c:190:6: warning: symbol 'meson_viu_set_osd_lut' was not declared. Should it be static? Signed-off-by:
-
YueHaibing authored
Fix sparse warnings: drivers/gpu/drm/sun4i/sun8i_tcon_top.c:271:36: warning: symbol 'sun8i_r40_tcon_top_quirks' was not declared. Should it be static? drivers/gpu/drm/sun4i/sun8i_tcon_top.c:276:36: warning: symbol 'sun50i_h6_tcon_top_quirks' was not declared. Should it be static? drivers/gpu/drm/sun4i/sun4i_tcon.c:239:6: warning: symbol 'sun4i_tcon_set_mux' was not declared. Should it be static? Reported-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190416145855.20852-1-yuehaibing@huawei.com
-
YueHaibing authored
Fix sparse warning: drivers/gpu/drm/lima/lima_sched.c:356:36: warning: symbol 'lima_sched_ops' was not declared. Should it be static? Fixes: a1d2a633 ("drm/lima: driver for ARM Mali4xx GPUs") Reported-by:
Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190416144353.34024-1-yuehaibing@huawei.com
-
Gerd Hoffmann authored
Also drop the dstclip parameter sphinx has warned about (leftover from an earlier patch version). Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20190416090533.28374-1-kraxel@redhat.com
-
- 16 Apr, 2019 5 commits
-
-
Eric Anholt authored
It's a pretty direct port of what I did for v3d. Signed-off-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190401222635.25013-8-eric@anholt.netReviewed-and-tested-by:
-
Eric Anholt authored
I needed to add implicit dependency support for v3d, and Rob Herring has been working on it for panfrost, and I had recently looked at the lima implementation so I think this will be a good intersection of what we all want and simplify our scheduler implementations. v2: Rebase on xa_limit_32b API change, and tiny checkpatch cleanups on the way in (unsigned int vs unsigned, extra return before EXPORT_SYMBOL_GPL) Signed-off-by: -
Deepak Rawat authored
Plane property "FB_DAMAGE_CLIPS" can only be used by atomic aware user-space, so no point exposing it otherwise. Cc: <stable@vger.kernel.org> Signed-off-by:
Deepak Rawat <drawat@vmware.com> Reviewed-by:
-
Joel Stanley authored
The GFX IP is inside of the ASPEED BMC SoC so there is little use enabling it on a kernel that does not support ASPEED. When building with COMPILE_TEST the architecture many not have CMA support, so to avoid breaking the build we only select these options if the architecture supports the contiguous allocator. I suspect the DRM_PANEL came from a cut/paste error. Fixes: 4f2a8f58 ("drm: Add ASPEED GFX driver") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Reported-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
-
Christian König authored
Instead of checking the upper values of the sequence number use an explicit field in the dma_fence_ops structure to note if a sequence should be 32bit or 64bit. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/299655/
-
- 12 Apr, 2019 7 commits
-
-
Rob Herring authored
Add support for 2MB sized pages. This will improve our map and unmap times and save a bit of memory by avoiding 3rd level page tables for contiguous allocations. As we use shmem for buffers and huge page allocations for shmem are off by default, there isn't an improvement out of the box and userspace must enable THP for shmem. It's not clear if the h/w can support 1GB page sizes which standard ARM long format descriptors support. In any case, it is unlikely we'll see any contiguous 1GB allocations on current h/w. Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Alyssa Rosenzweig <alyssa@rosenzweig.io> Reviewed-by:
-
Rob Herring authored
This adds the initial driver for panfrost which supports Arm Mali Midgard and Bifrost family of GPUs. Currently, only the T860 and T760 Midgard GPUs have been tested. v2: - Add GPU reset on job hangs (Tomeu) - Add RuntimePM and devfreq support (Tomeu) - Fix T760 support (Tomeu) - Add a TODO file (Rob, Tomeu) - Support multiple in fences (Tomeu) - Drop support for shared fences (Tomeu) - Fill in MMU de-init (Rob) - Move register definitions back to single header (Rob) - Clean-up hardcoded job submit todos (Rob) - Implement feature setup based on features/issues (Rob) - Add remaining Midgard DT compatible strings (Rob) v3: - Add support for reset lines (Neil) - Add a MAINTAINERS entry (Rob) - Call dma_set_mask_and_coherent (Rob) - Do MMU invalidate on map and unmap. Restructure to do a single operation per map/unmap call. (Rob) - Add a missing explicit padding to struct drm_panfrost_create_bo (Rob) - Fix 0-day error: "panfrost_devfreq.c:151:9-16: ERROR: PTR_ERR applied after initialization to constant on line 150" - Drop HW_FEATURE_AARCH64_MMU conditional (Rob) - s/DRM_PANFROST_PARAM_GPU_ID/DRM_PANFROST_PARAM_GPU_PROD_ID/ (Rob) - Check drm_gem_shmem_prime_import_sg_table() error code (Rob) - Re-order power on sequence (Rob) - Move panfrost_acquire_object_fences() before scheduling job (Rob) - Add NULL checks on array pointers in job clean-up (Rob) - Rework devfreq (Tomeu) - Fix devfreq init with no regulator (Rob) - Various WS and comments clean-up (Rob) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Lyude Paul <lyude@redhat.com> Reviewed-by:
Marty E. Plummer <hanetzer@startmail.com> Signed-off-by:
-
Rob Herring authored
Similar to the single handle drm_gem_object_lookup(), drm_gem_objects_lookup() takes an array of handles and returns an array of GEM objects. v2: - Take the userspace pointer directly and allocate the array. - Expand the function documentation. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Acked-by:
-
Rob Herring authored
ARM Mali midgard GPU is similar to standard 64-bit stage 1 page tables, but have a few differences. Add a new format type to represent the format. The input address size is 48-bits and the output address size is 40-bits (and possibly less?). Note that the later bifrost GPUs follow the standard 64-bit stage 1 format. The differences in the format compared to 64-bit stage 1 format are: The 3rd level page entry bits are 0x1 instead of 0x3 for page entries. The access flags are not read-only and unprivileged, but read and write. This is similar to stage 2 entries, but the memory attributes field matches stage 1 being an index. The nG bit is not set by the vendor driver. This one didn't seem to matter, but we'll keep it aligned to the vendor driver. Cc: Will Deacon <will.deacon@arm.com> Acked-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Peter Ujfalusi authored
The TFP410 supports 24 bit, single-edge and 12 bit, dual-edge modes. Depending on how many wires are used (24/12) the driver can set the correct bus_format. If the information is not available in DT then assume 24 bit, single-edge setup. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Peter Ujfalusi authored
tfp410 can be connect to host processor in 24bit, single-edge (24 lines) or 12bit, dual-edge (12 lines). Add bus-width to the documentation so it can be used to select between the two connection scheme. Signed-off-by:
-
Peter Ujfalusi authored
In case either the HPD gpio is not specified or when the HPD gpio can not be used as interrupt we should tell the core that the HPD needs to be polled for detecting hotplug. Signed-off-by:
-
- 11 Apr, 2019 6 commits
-
-
Gerd Hoffmann authored
Add comments to the existing feature flags, documenting which commands belong to them. Signed-off-by:
Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20190410114227.25846-2-kraxel@redhat.com
-
Gerd Hoffmann authored
Oops, the __iomem annotation was added to the header file only. Add it to the implementation (and documentation) too. Fixes: 5c5373b5 ("drm: switch drm_fb_xrgb8888_to_rgb888_dstclip to accept __iomem dst") Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Link: http://patchwork.freedesktop.org/patch/msgid/20190411044932.13247-1-kraxel@redhat.com
-
Noralf Trønnes authored
Due to copy/paste error, the fbdev format was changed to 32bpp = XRGB8888 which is an emulated format for the RGB565 drivers. Revert to to using the fallback which is dev->mode_config.preferred_depth for the drivers that set it or 32bpp for those that don't (repaper, st7586). Fixes: 3eba3922 ("drm/tinydrm: Drop using tinydrm_device") Signed-off-by:
-
Noralf Trønnes authored
It is generic code and having it in the helper will let other drivers benefit from it. One change was necessary assuming this to be true: INTEL_INFO(dev_priv)->num_pipes == dev->mode_config.num_crtc Suggested-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190407165243.54043-4-noralf@tronnes.org
-
Noralf Trønnes authored
This is done to stay consistent with our naming scheme of _register() = others can start calling us from any thread. Suggested-by:
-
Maxime Ripard authored
Now that we can express our DMA topology, rely on those property instead of hardcoding an offset from the dma_addr_t which wasn't really great. We still need to add some code to deal with the old DT that would lack that property, but we move the offset to the DRM device dma_pfn_offset to be able to rely on just the dma_addr_t associated to the GEM object. Acked-by:
-
- 10 Apr, 2019 5 commits
-
-
Sean Paul authored
Finally have a reason for a backmerge other than "it's been a while"! Backmerging drm-next to -misc-next to facilitate Rob Herring's work on Panfrost. Signed-off-by:Sean Paul <seanpaul@chromium.org>
-
Gerd Hoffmann authored
Signed-off-by:
-
Gerd Hoffmann authored
Not all archs have the __io_virt() macro, so cirrus can't simply convert pointers that way. The drm format helpers have to use memcpy_toio() instead. This patch makes drm_fb_xrgb8888_to_rgb888_dstclip() accept a __iomem dst pointer and use memcpy_toio() instead of memcpy(). The helper function (drm_fb_xrgb8888_to_rgb888_line) has been changed to process a single scanline. Signed-off-by:
-
Gerd Hoffmann authored
Not all archs have the __io_virt() macro, so cirrus can't simply convert pointers that way. The drm format helpers have to use memcpy_toio() instead. This patch makes drm_fb_xrgb8888_to_rgb565_dstclip() accept a __iomem dst pointer and use memcpy_toio() instead of memcpy(). The helper function (drm_fb_xrgb8888_to_rgb565_line) has been changed to process a single scanline. Signed-off-by:
-
Gerd Hoffmann authored
Not all archs have the __io_virt() macro, so cirrus can't simply convert pointers that way. The drm format helpers have to use memcpy_toio() instead. This patch makes drm_fb_memcpy_dstclip() accept a __iomem dst pointer and use memcpy_toio() instead of memcpy(). With that separating out the memcpy loop into the drm_fb_memcpy_lines() helper isn't useful any more, so move the code back into the calling functins. Signed-off-by:
-
- 09 Apr, 2019 5 commits
-
-
Qiang Yu authored
To prevent build fail on some platform which does not have it in the include file chain. Reviewed-by:
Randy Dunlap <rdunlap@infradead.org> Fixes: a1d2a633 ("drm/lima: driver for ARM Mali4xx GPUs") Signed-off-by:
-
Qiang Yu authored
Current implementation does not support MMU-less plarforms. Suggested-by:
-
Neil Armstrong authored
The Amlogic G12A embeds the same Synopsys DW-HDMI Controller, but with : - a "backport" of the HDR signaling registers from more recent DW-HDMI controllers, this will need a tweak since it's not normally present on this version of the DW-HDMI controller - A direct mapping of TOP and DW-HDMI registers instead of an internal bus accessed using read/write registers - Support for RX-SENSE, but not yet implemented - Support for HDMI 2.1 Dynamic HDR, but not yet implemented - Different registers mapping for the HDMI PHY setup This patchs adds support for these changes while providing exact same support as the previous GXBB, GXL & GXM SoCs. Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Reviewed-by:
-
Neil Armstrong authored
Finally add the Amlogic G12A SoC compatible for the VPU driver. Signed-off-by:
-
Neil Armstrong authored
While switching to the Common Clock Framework is still Work In Progress, this patch adds the corresponding G12A HDMI PLL setup to be on-par with the other SoCs support. The G12A has only a single tweak about the high frequency setup, where the HDMI PLL needs a specific setup to handle correctly the 5.94GHz DCO frequency. Apart that, it handls ecorrectly all the other HDMI frequencies and can achieve even better DMT clock frequency precision with the larger fractional dividier width. Signed-off-by:
-
