Skip to content

L
linux
Switch branch/tag
  1. 23 Aug, 2021 9 commits
  3. 20 Aug, 2021 3 commits
    • Mark Brown's avatar
      Merge series "ASoC: Intel/rt5640: Add support for HP Elite Pad 1000G2... · 77eca00f
      Mark Brown authored 
      Merge series "ASoC: Intel/rt5640: Add support for HP Elite Pad 1000G2 jack-detect" from Hans de Goede <hdegoede@redhat.com>:

Changes in v2:
- Rebase on asoc/for-next
- New patch: "ASoC: Intel: bytct_rt5640: Add a separate "Headset Mic 2"
  DAPM pin for the mic on the 2nd jack"
- Addressed Pierre-Louis' comments about calling
  acpi_dev_add_driver_gpios() twice

Original cover-letter:

The HP Elitepad 1000 G2 tablet has 2 headset jacks:

1. on the dock which uses the output of the codecs built-in HP-amp +
the standard IN2 input which is always used with the headset-jack.

2. on the tablet itself, this uses the line-out of the codec + an external
HP-amp, which gets enabled by the ALC5642 codec's GPIO1 pin; and IN1 for
the headset-mic.

The codec's GPIO1 is also its only IRQ output pin, so this means that
the codec's IRQ cannot be used on this tablet. Instead the jack-detect
is connected directly to GPIOs on the main SoC. The dock has a helper
chip which also detects if a headset-mic is present or not, so there
are 2 GPIOs for the jack-detect status of the dock. The tablet jack
uses a single GPIO which indicates if a jack is present or not.

Differentiating between between headphones vs a headset on the tablet jack
is done by using the usual mic-bias over-current-detection mechanism.

Regards,

Hans

Hans de Goede (6):
  ASoC: rt5640: Move rt5640_disable_jack_detect() up in the rt5640.c
    file
  ASoC: rt5640: Delay requesting IRQ until the machine-drv calls
    set_jack
  ASoC: rt5640: Add optional hp_det_gpio parameter to
    rt5640_detect_headset()
  ASoC: rt5640: Add rt5640_set_ovcd_params() helper
  ASoC: Intel: bytct_rt5640: Add a separate "Headset Mic 2" DAPM pin for
    the mic on the 2nd jack
  ASoC: Intel: bytcr_rt5640: Add support for HP Elite Pad 1000G2
    jack-detect

 sound/soc/codecs/rt5640.c             | 136 ++++++++++++----------
 sound/soc/codecs/rt5640.h             |   6 +
 sound/soc/intel/boards/bytcr_rt5640.c | 158 +++++++++++++++++++++++++-
 3 files changed, 234 insertions(+), 66 deletions(-)

--
2.31.1
      77eca00f
    • Kuninori Morimoto's avatar
      ASoC: rsnd: adg: clearly handle clock error / NULL case · cc64c390
      Kuninori Morimoto authored 
      This driver is assuming that all adg->clk[i] is not NULL.
Because of this prerequisites, for_each_rsnd_clk() is possible to work
for all clk without checking NULL. In other words, all adg->clk[i]
should not NULL.

Some SoC might doesn't have clk_a/b/c/i. devm_clk_get() returns error in
such case. This driver calls rsnd_adg_null_clk_get() and use null_clk
instead of NULL in such cases.

But devm_clk_get() might returns NULL even though such clocks exist, but
it doesn't mean error (user deliberately chose to disable the feature).
NULL clk itself is not error from clk point of view, but is error from
this driver point of view because it is not assuming such case.

But current code is using IS_ERR() which doesn't care NULL.
This driver uses IS_ERR_OR_NULL() instead of IS_ERR() for clk check.
And it uses ERR_CAST() to clarify null_clk error.

One concern here is that it unconditionally uses null_clk if clk_a/b/c/i
was error. It is correct if it doesn't exist, but is not correct if it
returns error even though it exist.
It needs to check "clock-names" from DT before calling devm_clk_get() to
handling such case. But let's assume it is overkill so far.

Link: https://lore.kernel.org/r/YMCmhfQUimHCSH/n@mwandaReported-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: default avatarKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v940wyf9.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      cc64c390
    • Kuninori Morimoto's avatar
      ASoC: rsnd: core: make some arrays static const, makes object smaller · 28889de6
      Kuninori Morimoto authored 
      Don't populate arrays on the stack but instead them static const.
Makes the object code smaller by 48 bytes.

Before:
   text    data     bss     dec     hex filename
  20938     916     104   21958    55c6 ./sound/soc/sh/rcar/core.o

After:
   text    data     bss     dec     hex filename
  20890     916     104   21910    5596 ./sound/soc/sh/rcar/core.o

gcc version 11.1.0)
Signed-off-by: default avatarKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tujkwydx.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      28889de6
  5. 19 Aug, 2021 8 commits
  7. 18 Aug, 2021 1 commit
  9. 17 Aug, 2021 5 commits
  11. 16 Aug, 2021 13 commits
  13. 13 Aug, 2021 1 commit
    • Mark Brown's avatar
      Merge series "ASoC: Intel: boards: use software node API" from Pierre-Louis... · 31e53e13
      Mark Brown authored 
      Merge series "ASoC: Intel: boards: use software node API" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

This is an update on an earlier contribution from Heikki Krogerus

The function device_add_properties() is going to be removed.
Replacing it with software node API equivalents.

Thanks for Hans de Goede and Andy Shevchenko for their comments,
suggestions and Reviewed-by tags on GitHub. The review thread can be
found at https://github.com/thesofproject/linux/pull/3041)

v3 changes:
Fixed nit-picks from Andy: label, return value, missing commas/periods.
Added Andy's Reviewed-by tag

v2 changes: feedback from Andy and Hans
Better error handling
Codec reference is kept until the .remove callback
Remove bus search to find device

v1 changes from Heikki's patches:
Avoid the use of devm_ routines for Baytrail machine drivers.

Heikki Krogerus (1):
  ASoC: Intel: boards: use software node API in Atom boards

Pierre-Louis Bossart (7):
  ASoC: Intel: boards: harden codec property handling
  ASoC: Intel: boards: handle errors with acpi_dev_get_first_match_dev()
  ASoC: Intel: boards: get codec device with ACPI instead of bus search
  ASoC: Intel: sof_sdw: pass card information to init/exit functions
  ASoC: Intel: sof_sdw_rt711*: keep codec device reference until remove
  ASoC: Intel: use software node API in SoundWire machines
  ASoC: Intel: remove device_properties for Atom boards

 sound/soc/intel/boards/bytcht_es8316.c      | 31 ++++++++--
 sound/soc/intel/boards/bytcr_rt5640.c       | 60 +++++++++++++++-----
 sound/soc/intel/boards/bytcr_rt5651.c       | 63 ++++++++++++++-------
 sound/soc/intel/boards/sof_sdw.c            | 20 ++++---
 sound/soc/intel/boards/sof_sdw_common.h     | 37 +++++++-----
 sound/soc/intel/boards/sof_sdw_max98373.c   |  3 +-
 sound/soc/intel/boards/sof_sdw_rt1308.c     |  3 +-
 sound/soc/intel/boards/sof_sdw_rt1316.c     |  3 +-
 sound/soc/intel/boards/sof_sdw_rt5682.c     |  3 +-
 sound/soc/intel/boards/sof_sdw_rt700.c      |  3 +-
 sound/soc/intel/boards/sof_sdw_rt711.c      | 51 +++++++++--------
 sound/soc/intel/boards/sof_sdw_rt711_sdca.c | 52 +++++++++--------
 sound/soc/intel/boards/sof_sdw_rt715.c      |  3 +-
 sound/soc/intel/boards/sof_sdw_rt715_sdca.c |  3 +-
 14 files changed, 223 insertions(+), 112 deletions(-)

--
2.25.1
      31e53e13
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7