- 29 Feb, 2016 1 commit
-
-
Shaohui Xie authored
commit 11e122cb upstream. Currently, if phy state is PHY_RUNNING, we always register a CHANGE when phy works in polling or interrupt ignored, this will make the adjust_link being called even the phy link did Not changed. checking the phy link to make sure the link did changed before we register a CHANGE, if link did not changed, we do nothing. Signed-off-by:
Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
- 25 Feb, 2016 39 commits
-
-
Thomas Hellstrom authored
commit 12617971 upstream. A regression introduced when the master ttm lock was split into two. Reported-and-tested-by:
Brian Paul <brianp@vmware.com> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
-
Willy Tarreau authored
commit 759c0114 upstream. On no-so-small systems, it is possible for a single process to cause an OOM condition by filling large pipes with data that are never read. A typical process filling 4000 pipes with 1 MB of data will use 4 GB of memory. On small systems it may be tricky to set the pipe max size to prevent this from happening. This patch makes it possible to enforce a per-user soft limit above which new pipes will be limited to a single page, effectively limiting them to 4 kB each, as well as a hard limit above which no new pipes may be created for this user. This has the effect of protecting the system against memory abuse without hurting other users, and still allowing pipes to work correctly though with less data at once. The limit are controlled by two new sysctls : pipe-user-pages-soft, and pipe-user-pages-hard. Both may be disabled by setting them to zero. The default soft limit allows the default number of FDs per process (1024) to create pipes of the default size (64kB), thus reaching a limit of 64MB before starting to create only smaller pipes. With 256 processes limited to 1024 FDs each, this results in 1024*64kB + (256*1024 - 1024) * 4kB = 1084 MB of memory allocated for a user. The hard limit is disabled by default to avoid breaking existing applications that make intensive use of pipes (eg: for splicing). Reported-by: socketpair@gmail.com Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Mitigates: CVE-2013-4312 (Linux 2.0+) Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Leon Romanovsky authored
commit 75c1657e upstream. Fix the RC QPs send queue overhead computation to take into account two additional segments in the WQE which are needed for registration operations. The ATOMIC and UMR segments can't coexist together, so chose maximum out of them. The commit 9e65dc37 ("IB/mlx5: Fix RC transport send queue overhead computation") was intended to update RC transport as commit messages states, but added the code to UC transport. Fixes: 9e65dc37 ("IB/mlx5: Fix RC transport send queue overhead computation") Signed-off-by:
Kamal Heib <kamalh@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Reviewed-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Xin Long authored
commit 7a84bd46 upstream. Commit ed5a377d ("sctp: translate host order to network order when setting a hmacid") corrected the hmacid byte-order when setting a hmacid. but the same issue also exists on getting a hmacid. We fix it by changing hmacids to host order when users get them with getsockopt. Fixes: Commit ed5a377d ("sctp: translate host order to network order when setting a hmacid") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Eric Dumazet authored
commit 44c3d0c1 upstream. Silence lockdep false positive about rcu_dereference() being used in the wrong context. First one should use rcu_dereference_protected() as we own the spinlock. Second one should be a normal assignation, as no barrier is needed. Fixes: 18367681 ("ipv6 flowlabel: Convert np->ipv6_fl_list to RCU.") Reported-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Hannes Frederic Sowa authored
commit 415e3d3e upstream. The commit referenced in the Fixes tag incorrectly accounted the number of in-flight fds over a unix domain socket to the original opener of the file-descriptor. This allows another process to arbitrary deplete the original file-openers resource limit for the maximum of open files. Instead the sending processes and its struct cred should be credited. To do so, we add a reference counted struct user_struct pointer to the scm_fp_list and use it to account for the number of inflight unix fds. Fixes: 712f4aad ("unix: properly account for FDs passed over unix sockets") Reported-by:
David Herrmann <dh.herrmann@gmail.com> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Linus Torvalds <torvalds@linux-foundation.org> Suggested-by:
-
Ken-ichirou MATSUZAWA authored
commit aa3a0220 upstream. We should not trim skb for mmaped socket since its buf size is fixed and userspace will read as frame which data equals head. mmaped socket will not call recvmsg, means max_recvmsg_len is 0, skb_reserve was not called before commit: db65a3aa. Fixes: db65a3aa (netlink: Trim skb to alloc size to avoid MSG_TRUNC) Signed-off-by:
Ken-ichirou MATSUZAWA <chamas@h4.dion.ne.jp> Signed-off-by:
-
Marcelo Ricardo Leitner authored
commit 27f7ed2b upstream. This patch extends commit b93d6471 ("sctp: implement the sender side for SACK-IMMEDIATELY extension") as it didn't white list SCTP_SACK_IMMEDIATELY on sctp_msghdr_parse(), causing it to be understood as an invalid flag and returning -EINVAL to the application. Note that the actual handling of the flag is already there in sctp_datamsg_from_user(). https://tools.ietf.org/html/rfc7053#section-7 Fixes: b93d6471 ("sctp: implement the sender side for SACK-IMMEDIATELY extension") Signed-off-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Hannes Frederic Sowa authored
commit 9a368aff upstream. Several times already this has been reported as kasan reports caused by syzkaller and trinity and people always looked at RCU races, but it is much more simple. :) In case we bind a pptp socket multiple times, we simply add it to the callid_sock list but don't remove the old binding. Thus the old socket stays in the bucket with unused call_id indexes and doesn't get cleaned up. This causes various forms of kasan reports which were hard to pinpoint. Simply don't allow multiple binds and correct error handling in pptp_bind. Also keep sk_state bits in place in pptp_connect. Fixes: 00959ade ("PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)") Cc: Dmitry Kozlov <xeb@mail.ru> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Dave Jones <davej@codemonkey.org.uk> Reported-by:
-
Eric Dumazet authored
commit fa0dc04d upstream. Dmitry reported a struct pid leak detected by a syzkaller program. Bug happens in unix_stream_recvmsg() when we break the loop when a signal is pending, without properly releasing scm. Fixes: b3ca9b02 ("net: fix multithreaded signal handling in unix recv routines") Reported-by:
-
Florian Fainelli authored
commit deccd16f upstream. Commit 5ea94e76 ("phy: add phy_mac_interrupt()") to use with PHY_IGNORE_INTERRUPT added a cancel_work_sync() into phy_mac_interrupt() which is allowed to sleep, whereas phy_mac_interrupt() is expected to be callable from interrupt context. Now that we have fixed how the PHY state machine treats PHY_IGNORE_INTERRUPT with respect to state changes, we can just set the new link state, and queue the PHY state machine for execution so it is going to read the new link state. For that to work properly, we need to update phy_change() not to try to invoke any interrupt callbacks if we have configured the PHY device for PHY_IGNORE_INTERRUPT, because that PHY device and its driver are not required to implement those. Fixes: 5ea94e76 ("phy: add phy_mac_interrupt() to use with PHY_IGNORE_INTERRUPT") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David Sterba authored
commit bc4ef759 upstream. The value of ctx->pos in the last readdir call is supposed to be set to INT_MAX due to 32bit compatibility, unless 'pos' is intentially set to a larger value, then it's LLONG_MAX. There's a report from PaX SIZE_OVERFLOW plugin that "ctx->pos++" overflows (https://forums.grsecurity.net/viewtopic.php?f=1&t=4284), on a 64bit arch, where the value is 0x7fffffffffffffff ie. LLONG_MAX before the increment. We can get to that situation like that: * emit all regular readdir entries * still in the same call to readdir, bump the last pos to INT_MAX * next call to readdir will not emit any entries, but will reach the bump code again, finds pos to be INT_MAX and sets it to LLONG_MAX Normally this is not a problem, but if we call readdir again, we'll find 'pos' set to LLONG_MAX and the unconditional increment will overflow. The report from Victor at (http://thread.gmane.org/gmane.comp.file-systems.btrfs/49500) with debugging print shows that pattern: Overflow: e Overflow: 7fffffff Overflow: 7fffffffffffffff PAX: size overflow detected in function btrfs_real_readdir fs/btrfs/inode.c:5760 cicus.935_282 max, count: 9, decl: pos; num: 0; context: dir_context; CPU: 0 PID: 2630 Comm: polkitd Not tainted 4.2.3-grsec #1 Hardware name: Gigabyte Technology Co., Ltd. H81ND2H/H81ND2H, BIOS F3 08/11/2015 ffffffff81901608 0000000000000000 ffffffff819015e6 ffffc90004973d48 ffffffff81742f0f 0000000000000007 ffffffff81901608 ffffc90004973d78 ffffffff811cb706 0000000000000000 ffff8800d47359e0 ffffc90004973ed8 Call Trace: [<ffffffff81742f0f>] dump_stack+0x4c/0x7f [<ffffffff811cb706>] report_size_overflow+0x36/0x40 [<ffffffff812ef0bc>] btrfs_real_readdir+0x69c/0x6d0 [<ffffffff811dafc8>] iterate_dir+0xa8/0x150 [<ffffffff811e6d8d>] ? __fget_light+0x2d/0x70 [<ffffffff811dba3a>] SyS_getdents+0xba/0x1c0 Overflow: 1a [<ffffffff811db070>] ? iterate_dir+0x150/0x150 [<ffffffff81749b69>] entry_SYSCALL_64_fastpath+0x12/0x83 The jump from 7fffffff to 7fffffffffffffff happens when new dir entries are not yet synced and are processed from the delayed list. Then the code could go to the bump section again even though it might not emit any new dir entries from the delayed list. The fix avoids entering the "bump" section again once we've finished emitting the entries, both for synced and delayed entries. References: https://forums.grsecurity.net/viewtopic.php?f=1&t=4284Reported-by:
Victor <services@swwu.com> Signed-off-by:
David Sterba <dsterba@suse.com> Tested-by:
Holger Hoffstätte <holger.hoffstaette@googlemail.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Linus Walleij authored
commit e972c374 upstream. Since the dawn of time the ICST code has only supported divide by one or hang in an eternal loop. Luckily we were always dividing by one because the reference frequency for the systems using the ICSTs is 24MHz and the [min,max] values for the PLL input if [10,320] MHz for ICST307 and [6,200] for ICST525, so the loop will always terminate immediately without assigning any divisor for the reference frequency. But for the code to make sense, let's insert the missing i++ Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Nicolai Hähnle authored
commit f6ff4f67 upstream. An arbitrary amount of time can pass between spin_unlock and radeon_fence_wait_any, so we need to ensure that nobody frees the fences from under us. Based on the analogous fix for amdgpu. Signed-off-by:
Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Tejun Heo authored
commit d6e022f1 upstream. When looking up the pool_workqueue to use for an unbound workqueue, workqueue assumes that the target CPU is always bound to a valid NUMA node. However, currently, when a CPU goes offline, the mapping is destroyed and cpu_to_node() returns NUMA_NO_NODE. This has always been broken but hasn't triggered often enough before 874bbfe6 ("workqueue: make sure delayed work run in local cpu"). After the commit, workqueue forcifully assigns the local CPU for delayed work items without explicit target CPU to fix a different issue. This widens the window where CPU can go offline while a delayed work item is pending causing delayed work items dispatched with target CPU set to an already offlined CPU. The resulting NUMA_NO_NODE mapping makes workqueue try to queue the work item on a NULL pool_workqueue and thus crash. While 874bbfe6 has been reverted for a different reason making the bug less visible again, it can still happen. Fix it by mapping NUMA_NO_NODE to the default pool_workqueue from unbound_pwq_by_node(). This is a temporary workaround. The long term solution is keeping CPU -> NODE mapping stable across CPU off/online cycles which is being worked on. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Len Brown <len.brown@intel.com> Link: http://lkml.kernel.org/g/1454424264.11183.46.camel@gmail.com Link: http://lkml.kernel.org/g/1453702100-2597-1-git-send-email-tangchen@cn.fujitsu.com [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Alexandra Yates authored
commit 342decff upstream. Adding Intel codename DNV platform device IDs for SATA. Signed-off-by:
Alexandra Yates <alexandra.yates@linux.intel.com> Signed-off-by:
-
Tony Lindgren authored
commit b241d31e upstream. Otherwise rmmod omap2430; rmmod phy-twl4030-usb; modprobe omap2430 will try to use a non-existing phy and oops: Unable to handle kernel paging request at virtual address b6f7c1f0 ... [<c048a284>] (devm_usb_get_phy_by_node) from [<bf0758ac>] (omap2430_musb_init+0x44/0x2b4 [omap2430]) [<bf0758ac>] (omap2430_musb_init [omap2430]) from [<bf055ec0>] (musb_init_controller+0x194/0x878 [musb_hdrc]) Cc: Bin Liu <b-liu@ti.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: NeilBrown <neil@brown.name> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Takashi Iwai authored
commit 4dff5c7b upstream. snd_timer_user_read() has a potential race among parallel reads, as qhead and qused are updated outside the critical section due to copy_to_user() calls. Move them into the critical section, and also sanitize the relevant code a bit. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit ed8b1d6d upstream. A slave timer element also unlinks at snd_timer_stop() but it takes only slave_active_lock. When a slave is assigned to a master, however, this may become a race against the master's interrupt handling, eventually resulting in a list corruption. The actual bug could be seen with a syzkaller fuzzer test case in BugLink below. As a fix, we need to take timeri->timer->lock when timer isn't NULL, i.e. assigned to a master, while the assignment to a master itself is protected by slave_active_lock. BugLink: http://lkml.kernel.org/r/CACT4Y+Y_Bm+7epAb=8Wi=AaWd+DYS7qawX52qxdCfOfY49vozQ@mail.gmail.comSigned-off-by:
-
Linus Walleij authored
commit 5070fb14 upstream. When trying to set the ICST 307 clock to 25174000 Hz I ran into this arithmetic error: the icst_hz_to_vco() correctly figure out DIVIDE=2, RDW=100 and VDW=99 yielding a frequency of 25174000 Hz out of the VCO. (I replicated the icst_hz() function in a spreadsheet to verify this.) However, when I called icst_hz() on these VCO settings it would instead return 4122709 Hz. This causes an error in the common clock driver for ICST as the common clock framework will call .round_rate() on the clock which will utilize icst_hz_to_vco() followed by icst_hz() suggesting the erroneous frequency, and then the clock gets set to this. The error did not manifest in the old clock framework since this high frequency was only used by the CLCD, which calls clk_set_rate() without first calling clk_round_rate() and since the old clock framework would not call clk_round_rate() before setting the frequency, the correct values propagated into the VCO. After some experimenting I figured out that it was due to a simple arithmetic overflow: the divisor for 24Mhz reference frequency as reference becomes 24000000*2*(99+8)=0x132212400 and the "1" in bit 32 overflows and is lost. But introducing an explicit 64-by-32 bit do_div() and casting the divisor into (u64) we get the right frequency back, and the right frequency gets set. Tested on the ARM Versatile. Cc: linux-clk@vger.kernel.org Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by:
-
Takashi Iwai authored
commit 117159f0 upstream. In snd_timer_notify1(), the wrong timer instance was passed for slave ccallback function. This leads to the access to the wrong data when an incompatible master is handled (e.g. the master is the sequencer timer and the slave is a user timer), as spotted by syzkaller fuzzer. This patch fixes that wrong assignment. BugLink: http://lkml.kernel.org/r/CACT4Y+Y_Bm+7epAb=8Wi=AaWd+DYS7qawX52qxdCfOfY49vozQ@mail.gmail.comReported-by:
-
Takashi Iwai authored
commit ddce57a6 upstream. Currently the selected timer backend is referred at any moment from the running PCM callbacks. When the backend is switched, it's possible to lead to inconsistency from the running backend. This was pointed by syzkaller fuzzer, and the commit [7ee96216: ALSA: dummy: Disable switching timer backend via sysfs] disabled the dynamic switching for avoiding the crash. This patch improves the handling of timer backend switching. It keeps the reference to the selected backend during the whole operation of an opened stream so that it won't be changed by other streams. Together with this change, the hrtimer parameter is reenabled as writable now. NOTE: this patch also turned out to fix the still remaining race. Namely, ops was still replaced dynamically at dummy_pcm_open: static int dummy_pcm_open(struct snd_pcm_substream *substream) { .... dummy->timer_ops = &dummy_systimer_ops; if (hrtimer) dummy->timer_ops = &dummy_hrtimer_ops; Since dummy->timer_ops is common among all streams, and when the replacement happens during accesses of other streams, it may lead to a crash. This was actually triggered by syzkaller fuzzer and KASAN. This patch rewrites the code not to use the ops shared by all streams any longer, too. BugLink: http://lkml.kernel.org/r/CACT4Y+aZ+xisrpuM6cOXbL21DuM0yVxPYXf4cD4Md9uw0C3dBQ@mail.gmail.comReported-by:
-
James Bottomley authored
commit 00cd29b7 upstream. The starting node for a klist iteration is often passed in from somewhere way above the klist infrastructure, meaning there's no guarantee the node is still on the list. We've seen this in SCSI where we use bus_find_device() to iterate through a list of devices. In the face of heavy hotplug activity, the last device returned by bus_find_device() can be removed before the next call. This leads to Dec 3 13:22:02 localhost kernel: WARNING: CPU: 2 PID: 28073 at include/linux/kref.h:47 klist_iter_init_node+0x3d/0x50() Dec 3 13:22:02 localhost kernel: Modules linked in: scsi_debug x86_pkg_temp_thermal kvm_intel kvm irqbypass crc32c_intel joydev iTCO_wdt dcdbas ipmi_devintf acpi_power_meter iTCO_vendor_support ipmi_si imsghandler pcspkr wmi acpi_cpufreq tpm_tis tpm shpchp lpc_ich mfd_core nfsd nfs_acl lockd grace sunrpc tg3 ptp pps_core Dec 3 13:22:02 localhost kernel: CPU: 2 PID: 28073 Comm: cat Not tainted 4.4.0-rc1+ #2 Dec 3 13:22:02 localhost kernel: Hardware name: Dell Inc. PowerEdge R320/08VT7V, BIOS 2.0.22 11/19/2013 Dec 3 13:22:02 localhost kernel: ffffffff81a20e77 ffff880613acfd18 ffffffff81321eef 0000000000000000 Dec 3 13:22:02 localhost kernel: ffff880613acfd50 ffffffff8107ca52 ffff88061176b198 0000000000000000 Dec 3 13:22:02 localhost kernel: ffffffff814542b0 ffff880610cfb100 ffff88061176b198 ffff880613acfd60 Dec 3 13:22:02 localhost kernel: Call Trace: Dec 3 13:22:02 localhost kernel: [<ffffffff81321eef>] dump_stack+0x44/0x55 Dec 3 13:22:02 localhost kernel: [<ffffffff8107ca52>] warn_slowpath_common+0x82/0xc0 Dec 3 13:22:02 localhost kernel: [<ffffffff814542b0>] ? proc_scsi_show+0x20/0x20 Dec 3 13:22:02 localhost kernel: [<ffffffff8107cb4a>] warn_slowpath_null+0x1a/0x20 Dec 3 13:22:02 localhost kernel: [<ffffffff8167225d>] klist_iter_init_node+0x3d/0x50 Dec 3 13:22:02 localhost kernel: [<ffffffff81421d41>] bus_find_device+0x51/0xb0 Dec 3 13:22:02 localhost kernel: [<ffffffff814545ad>] scsi_seq_next+0x2d/0x40 [...] And an eventual crash. It can actually occur in any hotplug system which has a device finder and a starting device. We can fix this globally by making sure the starting node for klist_iter_init_node() is actually a member of the list before using it (and by starting from the beginning if it isn't). Reported-by:
Ewan D. Milne <emilne@redhat.com> Tested-by:
James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Takashi Iwai authored
commit c44d9b11 upstream. Some Sony VAIO AiO models (VGC-JS4EF and VGC-JS25G, both with PCI SSID 104d:9044) need the same quirk to make the speaker working properly. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112031Signed-off-by:
-
Herton R. Krzesinski authored
commit 1f55c718 upstream. Considering current pty code and multiple devpts instances, it's possible to umount a devpts file system while a program still has /dev/tty opened pointing to a previosuly closed pty pair in that instance. In the case all ptmx and pts/N files are closed, umount can be done. If the program closes /dev/tty after umount is done, devpts_kill_index will use now an invalid super_block, which was already destroyed in the umount operation after running ->kill_sb. This is another "use after free" type of issue, but now related to the allocated super_block instance. To avoid the problem (warning at ida_remove and potential crashes) for this specific case, I added two functions in devpts which grabs additional references to the super_block, which pty code now uses so it makes sure the super block structure is still valid until pty shutdown is done. I also moved the additional inode references to the same functions, which also covered similar case with inode being freed before /dev/tty final close/shutdown. Signed-off-by:
Herton R. Krzesinski <herton@redhat.com> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Herton R. Krzesinski authored
commit 2831c89f upstream. This change fixes a bug for a corner case where we have the the last release from a pty master/slave coming from a previously opened /dev/tty file. When this happens, the tty->driver_data can be stale, due to all ptmx or pts/N files having already been closed before (and thus the inode related to these files, which tty->driver_data points to, being already freed/destroyed). The fix here is to keep a reference on the opened master ptmx inode. We maintain the inode referenced until the final pty_unix98_shutdown, and only pass this inode to devpts_kill_index. Signed-off-by:
-
Peter Hurley authored
commit 308bbc9a upstream. The omap-serial driver emulates RS485 delays using software timers, but neglects to clamp the input values from the unprivileged ioctl(TIOCSRS485). Because the software implementation busy-waits, malicious userspace could stall the cpu for ~49 days. Clamp the input values to < 100ms. Fixes: 4a0ac0f5 ("OMAP: add RS485 support") Signed-off-by:
-
Mathias Krause authored
commit 63e41ebc upstream. We miss to take the crypto_alg_sem semaphore when traversing the crypto_alg_list for CRYPTO_MSG_GETALG dumps. This allows a race with crypto_unregister_alg() removing algorithms from the list while we're still traversing it, thereby leading to a use-after-free as show below: [ 3482.071639] general protection fault: 0000 [#1] SMP [ 3482.075639] Modules linked in: aes_x86_64 glue_helper lrw ablk_helper cryptd gf128mul ipv6 pcspkr serio_raw virtio_net microcode virtio_pci virtio_ring virtio sr_mod cdrom [last unloaded: aesni_intel] [ 3482.075639] CPU: 1 PID: 11065 Comm: crconf Not tainted 4.3.4-grsec+ #126 [ 3482.075639] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 3482.075639] task: ffff88001cd41a40 ti: ffff88001cd422c8 task.ti: ffff88001cd422c8 [ 3482.075639] RIP: 0010:[<ffffffff93722bd3>] [<ffffffff93722bd3>] strncpy+0x13/0x30 [ 3482.075639] RSP: 0018:ffff88001f713b60 EFLAGS: 00010202 [ 3482.075639] RAX: ffff88001f6c4430 RBX: ffff88001f6c43a0 RCX: ffff88001f6c4430 [ 3482.075639] RDX: 0000000000000040 RSI: fefefefefefeff16 RDI: ffff88001f6c4430 [ 3482.075639] RBP: ffff88001f713b60 R08: ffff88001f6c4470 R09: ffff88001f6c4480 [ 3482.075639] R10: 0000000000000002 R11: 0000000000000246 R12: ffff88001ce2aa28 [ 3482.075639] R13: ffff880000093700 R14: ffff88001f5e4bf8 R15: 0000000000003b20 [ 3482.075639] FS: 0000033826fa2700(0000) GS:ffff88001e900000(0000) knlGS:0000000000000000 [ 3482.075639] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3482.075639] CR2: ffffffffff600400 CR3: 00000000139ec000 CR4: 00000000001606f0 [ 3482.075639] Stack: [ 3482.075639] ffff88001f713bd8 ffffffff936ccd00 ffff88001e5c4200 ffff880000093700 [ 3482.075639] ffff88001f713bd0 ffffffff938ef4bf 0000000000000000 0000000000003b20 [ 3482.075639] ffff88001f5e4bf8 ffff88001f5e4848 0000000000000000 0000000000003b20 [ 3482.075639] Call Trace: [ 3482.075639] [<ffffffff936ccd00>] crypto_report_alg+0xc0/0x3e0 [ 3482.075639] [<ffffffff938ef4bf>] ? __alloc_skb+0x16f/0x300 [ 3482.075639] [<ffffffff936cd08a>] crypto_dump_report+0x6a/0x90 [ 3482.075639] [<ffffffff93935707>] netlink_dump+0x147/0x2e0 [ 3482.075639] [<ffffffff93935f99>] __netlink_dump_start+0x159/0x190 [ 3482.075639] [<ffffffff936ccb13>] crypto_user_rcv_msg+0xc3/0x130 [ 3482.075639] [<ffffffff936cd020>] ? crypto_report_alg+0x3e0/0x3e0 [ 3482.075639] [<ffffffff936cc4b0>] ? alg_test_crc32c+0x120/0x120 [ 3482.075639] [<ffffffff93933145>] ? __netlink_lookup+0xd5/0x120 [ 3482.075639] [<ffffffff936cca50>] ? crypto_add_alg+0x1d0/0x1d0 [ 3482.075639] [<ffffffff93938141>] netlink_rcv_skb+0xe1/0x130 [ 3482.075639] [<ffffffff936cc4f8>] crypto_netlink_rcv+0x28/0x40 [ 3482.075639] [<ffffffff939375a8>] netlink_unicast+0x108/0x180 [ 3482.075639] [<ffffffff93937c21>] netlink_sendmsg+0x541/0x770 [ 3482.075639] [<ffffffff938e31e1>] sock_sendmsg+0x21/0x40 [ 3482.075639] [<ffffffff938e4763>] SyS_sendto+0xf3/0x130 [ 3482.075639] [<ffffffff93444203>] ? bad_area_nosemaphore+0x13/0x20 [ 3482.075639] [<ffffffff93444470>] ? __do_page_fault+0x80/0x3a0 [ 3482.075639] [<ffffffff939d80cb>] entry_SYSCALL_64_fastpath+0x12/0x6e [ 3482.075639] Code: 88 4a ff 75 ed 5d 48 0f ba 2c 24 3f c3 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 85 d2 48 89 f8 48 89 f9 4c 8d 04 17 48 89 e5 74 15 <0f> b6 16 80 fa 01 88 11 48 83 de ff 48 83 c1 01 4c 39 c1 75 eb [ 3482.075639] RIP [<ffffffff93722bd3>] strncpy+0x13/0x30 To trigger the race run the following loops simultaneously for a while: $ while : ; do modprobe aesni-intel; rmmod aesni-intel; done $ while : ; do crconf show all > /dev/null; done Fix the race by taking the crypto_alg_sem read lock, thereby preventing crypto_unregister_alg() from modifying the algorithm list during the dump. This bug has been detected by the PaX memory sanitize feature. Signed-off-by:
Mathias Krause <minipli@googlemail.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: PaX Team <pageexec@freemail.hu> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Konstantin Khlebnikov authored
commit 73204282 upstream. Helper radix_tree_iter_retry() resets next_index to the current index. In following radix_tree_next_slot current chunk size becomes zero. This isn't checked and it tries to dereference null pointer in slot. Tagged iterator is fine because retry happens only at slot 0 where tag bitmask in iter->tags is filled with single bit. Fixes: 46437f9a ("radix-tree: fix race in gang lookup") Signed-off-by:
Konstantin Khlebnikov <koct9i@gmail.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Konstantin Khlebnikov authored
commit 12352d3c upstream. Sequence vma_lock_anon_vma() - vma_unlock_anon_vma() isn't safe if anon_vma appeared between lock and unlock. We have to check anon_vma first or call anon_vma_prepare() to be sure that it's here. There are only few users of these legacy helpers. Let's get rid of them. This patch fixes anon_vma lock imbalance in validate_mm(). Write lock isn't required here, read lock is enough. And reorders expand_downwards/expand_upwards: security_mmap_addr() and wrapping-around check don't have to be under anon vma lock. Link: https://lkml.kernel.org/r/CACT4Y+Y908EjM2z=706dv4rV6dWtxTLK9nFg9_7DhRMLppBo2g@mail.gmail.comSigned-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
xuejiufei authored
commit c95a5180 upstream. When recovery master down, dlm_do_local_recovery_cleanup() only remove the $RECOVERY lock owned by dead node, but do not clear the refmap bit. Which will make umount thread falling in dead loop migrating $RECOVERY to the dead node. Signed-off-by:
xuejiufei <xuejiufei@huawei.com> Reviewed-by:
Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
-
Tetsuo Handa authored
commit 564e81a5 upstream. Jan Stancek has reported that system occasionally hanging after "oom01" testcase from LTP triggers OOM. Guessing from a result that there is a kworker thread doing memory allocation and the values between "Node 0 Normal free:" and "Node 0 Normal:" differs when hanging, vmstat is not up-to-date for some reason. According to commit 373ccbe5 ("mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress"), it meant to force the kworker thread to take a short sleep, but it by error used schedule_timeout(1). We missed that schedule_timeout() in state TASK_RUNNING doesn't do anything. Fix it by using schedule_timeout_uninterruptible(1) which forces the kworker thread to take a short sleep in order to make sure that vmstat is up-to-date. Fixes: 373ccbe5 ("mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress") Signed-off-by:
Jan Stancek <jstancek@redhat.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Tejun Heo <tj@kernel.org> Cc: Cristopher Lameter <clameter@sgi.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Arkadiusz Miskiewicz <arekm@maven.pl> Signed-off-by:
-
Eric Dumazet authored
commit d7ce3692 upstream. Some servers experienced fatal deadlocks because of a combination of bugs, leading to multiple cpus calling dump_stack(). The checksumming bug was fixed in commit 34ae6a1a ("ipv6: update skb->csum when CE mark is propagated"). The second problem is a faulty locking in dump_stack() CPU1 runs in process context and calls dump_stack(), grabs dump_lock. CPU2 receives a TCP packet under softirq, grabs socket spinlock, and call dump_stack() from netdev_rx_csum_fault(). dump_stack() spins on atomic_cmpxchg(&dump_lock, -1, 2), since dump_lock is owned by CPU1 While dumping its stack, CPU1 is interrupted by a softirq, and happens to process a packet for the TCP socket locked by CPU2. CPU1 spins forever in spin_lock() : deadlock Stack trace on CPU1 looked like : NMI backtrace for cpu 1 RIP: _raw_spin_lock+0x25/0x30 ... Call Trace: <IRQ> tcp_v6_rcv+0x243/0x620 ip6_input_finish+0x11f/0x330 ip6_input+0x38/0x40 ip6_rcv_finish+0x3c/0x90 ipv6_rcv+0x2a9/0x500 process_backlog+0x461/0xaa0 net_rx_action+0x147/0x430 __do_softirq+0x167/0x2d0 call_softirq+0x1c/0x30 do_softirq+0x3f/0x80 irq_exit+0x6e/0xc0 smp_call_function_single_interrupt+0x35/0x40 call_function_single_interrupt+0x6a/0x70 <EOI> printk+0x4d/0x4f printk_address+0x31/0x33 print_trace_address+0x33/0x3c print_context_stack+0x7f/0x119 dump_trace+0x26b/0x28e show_trace_log_lvl+0x4f/0x5c show_stack_log_lvl+0x104/0x113 show_stack+0x42/0x44 dump_stack+0x46/0x58 netdev_rx_csum_fault+0x38/0x3c __skb_checksum_complete_head+0x6e/0x80 __skb_checksum_complete+0x11/0x20 tcp_rcv_established+0x2bd5/0x2fd0 tcp_v6_do_rcv+0x13c/0x620 sk_backlog_rcv+0x15/0x30 release_sock+0xd2/0x150 tcp_recvmsg+0x1c1/0xfc0 inet_recvmsg+0x7d/0x90 sock_recvmsg+0xaf/0xe0 ___sys_recvmsg+0x111/0x3b0 SyS_recvmsg+0x5c/0xb0 system_call_fastpath+0x16/0x1b Fixes: b58d9774 ("dump_stack: serialize the output from dump_stack()") Signed-off-by:
-
Takashi Iwai authored
commit 6c361d10 upstream. This reverts commit 0c25ad80. The original commit disabled the aamixer path due to the noise problem, but it turned out that some mobo with the same PCI SSID doesn't suffer from the issue, and the disabled function (analog loopback) is still demanded by users. Since the recent commit [e7fdd527: ALSA: hda - Implement loopback control switch for Realtek and other codecs], we have the dynamic mixer switch to enable/disable the aamix path, and we don't have to disable the path statically any longer. So, let's revert the disablement, so that only the user suffering from the noise problem can turn off the aamix on the fly. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=108301 Reported-by: <mutedbytes@gmail.com> Signed-off-by:
-
David Henningsson authored
commit 360a8245 upstream. The static checker warning is: sound/pci/hda/patch_hdmi.c:460 hdmi_eld_ctl_get() error: __memcpy() 'eld->eld_buffer' too small (256 vs 512) I have a hard time figuring out if this can ever cause an information leak (I don't think so), but nonetheless it does not hurt to increase the robustness of the code. Fixes: 68e03de9 ('ALSA: hda - hdmi: Do not expose eld data when eld is invalid') Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
Harry Wentland authored
commit 64566b5e upstream. drm_fixp_from_fraction allows us to create a fixed point directly from a fraction, rather than creating fixed point values and dividing later. This avoids overflow of our 64 bit value for large numbers. drm_fixp2int_ceil allows us to return the ceiling of our fixed point value. [airlied: squash Jordan's fix] 32-bit-build-fix: Jordan Lazare <Jordan.Lazare@amd.com> Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Mika Westerberg authored
commit 82c43310 upstream. I have a Marvell 88SE9230 SATA Controller that has some sort of integrated console SCSI device attached to one of the ports. ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 ata14.00: configured for UDMA/66 scsi 13:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5 Sending it VPD INQUIRY command seem to always fail with following error: ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 ata14.00: irq_stat 0x40000001 ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 2 dma 16640 in Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation) ata14: hard resetting link This has been minor annoyance (only error printed on dmesg) until commit 09e2b0b1 ("scsi: rescan VPD attributes") added call to scsi_attach_vpd() in scsi_rescan_device(). The commit causes the system to splat out following errors continuously without ever reaching the UI: ata14.00: configured for UDMA/66 ata14: EH complete ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 ata14.00: irq_stat 0x40000001 ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 6 dma 16640 in Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation) ata14: hard resetting link ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata14.00: configured for UDMA/66 ata14: EH complete ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 ata14.00: irq_stat 0x40000001 ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 7 dma 16640 in Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation) Without in-depth understanding of SCSI layer and the Marvell controller, I suspect this happens because when the link goes down (because of an error) we schedule scsi_rescan_device() which again fails to read VPD data... ad infinitum. Since VPD data cannot be read from the device anyway we prevent the SCSI layer from even trying by blacklisting the device. This gets away the error and the system starts up normally. [mkp: Widened the match to all revisions of this device] Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reported-by:
Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Hannes Reinecke authored
commit d2d06d4f upstream. If MODE SELECT returns with sense '05/91/36' (command lock violation) it should always be retried without counting the number of retries. During an HBA upgrade or similar circumstances one might see a flood of MODE SELECT command from various HBAs, which will easily trigger the sense code and exceed the retry count. Signed-off-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Filipe Manana authored
commit 0c0fe3b0 upstream. While doing some tests I ran into an hang on an extent buffer's rwlock that produced the following trace: [39389.800012] NMI watchdog: BUG: soft lockup - CPU#15 stuck for 22s! [fdm-stress:32166] [39389.800016] NMI watchdog: BUG: soft lockup - CPU#14 stuck for 22s! [fdm-stress:32165] [39389.800016] Modules linked in: btrfs dm_mod ppdev xor sha256_generic hmac raid6_pq drbg ansi_cprng aesni_intel i2c_piix4 acpi_cpufreq aes_x86_64 ablk_helper tpm_tis parport_pc i2c_core sg cryptd evdev psmouse lrw tpm parport gf128mul serio_raw pcspkr glue_helper processor button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last unloaded: btrfs] [39389.800016] irq event stamp: 0 [39389.800016] hardirqs last enabled at (0): [< (null)>] (null) [39389.800016] hardirqs last disabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35 [39389.800016] softirqs last enabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35 [39389.800016] softirqs last disabled at (0): [< (null)>] (null) [39389.800016] CPU: 14 PID: 32165 Comm: fdm-stress Not tainted 4.4.0-rc6-btrfs-next-18+ #1 [39389.800016] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [39389.800016] task: ffff880175b1ca40 ti: ffff8800a185c000 task.ti: ffff8800a185c000 [39389.800016] RIP: 0010:[<ffffffff810902af>] [<ffffffff810902af>] queued_spin_lock_slowpath+0x57/0x158 [39389.800016] RSP: 0018:ffff8800a185fb80 EFLAGS: 00000202 [39389.800016] RAX: 0000000000000101 RBX: ffff8801710c4e9c RCX: 0000000000000101 [39389.800016] RDX: 0000000000000100 RSI: 0000000000000001 RDI: 0000000000000001 [39389.800016] RBP: ffff8800a185fb98 R08: 0000000000000001 R09: 0000000000000000 [39389.800016] R10: ffff8800a185fb68 R11: 6db6db6db6db6db7 R12: ffff8801710c4e98 [39389.800016] R13: ffff880175b1ca40 R14: ffff8800a185fc10 R15: ffff880175b1ca40 [39389.800016] FS: 00007f6d37fff700(0000) GS:ffff8802be9c0000(0000) knlGS:0000000000000000 [39389.800016] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [39389.800016] CR2: 00007f6d300019b8 CR3: 0000000037c93000 CR4: 00000000001406e0 [39389.800016] Stack: [39389.800016] ffff8801710c4e98 ffff8801710c4e98 ffff880175b1ca40 ffff8800a185fbb0 [39389.800016] ffffffff81091e11 ffff8801710c4e98 ffff8800a185fbc8 ffffffff81091895 [39389.800016] ffff8801710c4e98 ffff8800a185fbe8 ffffffff81486c5c ffffffffa067288c [39389.800016] Call Trace: [39389.800016] [<ffffffff81091e11>] queued_read_lock_slowpath+0x46/0x60 [39389.800016] [<ffffffff81091895>] do_raw_read_lock+0x3e/0x41 [39389.800016] [<ffffffff81486c5c>] _raw_read_lock+0x3d/0x44 [39389.800016] [<ffffffffa067288c>] ? btrfs_tree_read_lock+0x54/0x125 [btrfs] [39389.800016] [<ffffffffa067288c>] btrfs_tree_read_lock+0x54/0x125 [btrfs] [39389.800016] [<ffffffffa0622ced>] ? btrfs_find_item+0xa7/0xd2 [btrfs] [39389.800016] [<ffffffffa069363f>] btrfs_ref_to_path+0xd6/0x174 [btrfs] [39389.800016] [<ffffffffa0693730>] inode_to_path+0x53/0xa2 [btrfs] [39389.800016] [<ffffffffa0693e2e>] paths_from_inode+0x117/0x2ec [btrfs] [39389.800016] [<ffffffffa0670cff>] btrfs_ioctl+0xd5b/0x2793 [btrfs] [39389.800016] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc [39389.800016] [<ffffffff81276727>] ? __this_cpu_preempt_check+0x13/0x15 [39389.800016] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc [39389.800016] [<ffffffff8118b3d4>] ? rcu_read_unlock+0x3e/0x5d [39389.800016] [<ffffffff811822f8>] do_vfs_ioctl+0x42b/0x4ea [39389.800016] [<ffffffff8118b4f3>] ? __fget_light+0x62/0x71 [39389.800016] [<ffffffff8118240e>] SyS_ioctl+0x57/0x79 [39389.800016] [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f [39389.800016] Code: b9 01 01 00 00 f7 c6 00 ff ff ff 75 32 83 fe 01 89 ca 89 f0 0f 45 d7 f0 0f b1 13 39 f0 74 04 89 c6 eb e2 ff ca 0f 84 fa 00 00 00 <8b> 03 84 c0 74 04 f3 90 eb f6 66 c7 03 01 00 e9 e6 00 00 00 e8 [39389.800012] Modules linked in: btrfs dm_mod ppdev xor sha256_generic hmac raid6_pq drbg ansi_cprng aesni_intel i2c_piix4 acpi_cpufreq aes_x86_64 ablk_helper tpm_tis parport_pc i2c_core sg cryptd evdev psmouse lrw tpm parport gf128mul serio_raw pcspkr glue_helper processor button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last unloaded: btrfs] [39389.800012] irq event stamp: 0 [39389.800012] hardirqs last enabled at (0): [< (null)>] (null) [39389.800012] hardirqs last disabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35 [39389.800012] softirqs last enabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35 [39389.800012] softirqs last disabled at (0): [< (null)>] (null) [39389.800012] CPU: 15 PID: 32166 Comm: fdm-stress Tainted: G L 4.4.0-rc6-btrfs-next-18+ #1 [39389.800012] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [39389.800012] task: ffff880179294380 ti: ffff880034a60000 task.ti: ffff880034a60000 [39389.800012] RIP: 0010:[<ffffffff81091e8d>] [<ffffffff81091e8d>] queued_write_lock_slowpath+0x62/0x72 [39389.800012] RSP: 0018:ffff880034a639f0 EFLAGS: 00000206 [39389.800012] RAX: 0000000000000101 RBX: ffff8801710c4e98 RCX: 0000000000000000 [39389.800012] RDX: 00000000000000ff RSI: 0000000000000000 RDI: ffff8801710c4e9c [39389.800012] RBP: ffff880034a639f8 R08: 0000000000000001 R09: 0000000000000000 [39389.800012] R10: ffff880034a639b0 R11: 0000000000001000 R12: ffff8801710c4e98 [39389.800012] R13: 0000000000000001 R14: ffff880172cbc000 R15: ffff8801710c4e00 [39389.800012] FS: 00007f6d377fe700(0000) GS:ffff8802be9e0000(0000) knlGS:0000000000000000 [39389.800012] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [39389.800012] CR2: 00007f6d3d3c1000 CR3: 0000000037c93000 CR4: 00000000001406e0 [39389.800012] Stack: [39389.800012] ffff8801710c4e98 ffff880034a63a10 ffffffff81091963 ffff8801710c4e98 [39389.800012] ffff880034a63a30 ffffffff81486f1b ffffffffa0672cb3 ffff8801710c4e00 [39389.800012] ffff880034a63a78 ffffffffa0672cb3 ffff8801710c4e00 ffff880034a63a58 [39389.800012] Call Trace: [39389.800012] [<ffffffff81091963>] do_raw_write_lock+0x72/0x8c [39389.800012] [<ffffffff81486f1b>] _raw_write_lock+0x3a/0x41 [39389.800012] [<ffffffffa0672cb3>] ? btrfs_tree_lock+0x119/0x251 [btrfs] [39389.800012] [<ffffffffa0672cb3>] btrfs_tree_lock+0x119/0x251 [btrfs] [39389.800012] [<ffffffffa061aeba>] ? rcu_read_unlock+0x5b/0x5d [btrfs] [39389.800012] [<ffffffffa061ce13>] ? btrfs_root_node+0xda/0xe6 [btrfs] [39389.800012] [<ffffffffa061ce83>] btrfs_lock_root_node+0x22/0x42 [btrfs] [39389.800012] [<ffffffffa062046b>] btrfs_search_slot+0x1b8/0x758 [btrfs] [39389.800012] [<ffffffff810fc6b0>] ? time_hardirqs_on+0x15/0x28 [39389.800012] [<ffffffffa06365db>] btrfs_lookup_inode+0x31/0x95 [btrfs] [39389.800012] [<ffffffff8108d62f>] ? trace_hardirqs_on+0xd/0xf [39389.800012] [<ffffffff8148482b>] ? mutex_lock_nested+0x397/0x3bc [39389.800012] [<ffffffffa068821b>] __btrfs_update_delayed_inode+0x59/0x1c0 [btrfs] [39389.800012] [<ffffffffa068858e>] __btrfs_commit_inode_delayed_items+0x194/0x5aa [btrfs] [39389.800012] [<ffffffff81486ab7>] ? _raw_spin_unlock+0x31/0x44 [39389.800012] [<ffffffffa0688a48>] __btrfs_run_delayed_items+0xa4/0x15c [btrfs] [39389.800012] [<ffffffffa0688d62>] btrfs_run_delayed_items+0x11/0x13 [btrfs] [39389.800012] [<ffffffffa064048e>] btrfs_commit_transaction+0x234/0x96e [btrfs] [39389.800012] [<ffffffffa0618d10>] btrfs_sync_fs+0x145/0x1ad [btrfs] [39389.800012] [<ffffffffa0671176>] btrfs_ioctl+0x11d2/0x2793 [btrfs] [39389.800012] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc [39389.800012] [<ffffffff81140261>] ? __might_fault+0x4c/0xa7 [39389.800012] [<ffffffff81140261>] ? __might_fault+0x4c/0xa7 [39389.800012] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc [39389.800012] [<ffffffff8118b3d4>] ? rcu_read_unlock+0x3e/0x5d [39389.800012] [<ffffffff811822f8>] do_vfs_ioctl+0x42b/0x4ea [39389.800012] [<ffffffff8118b4f3>] ? __fget_light+0x62/0x71 [39389.800012] [<ffffffff8118240e>] SyS_ioctl+0x57/0x79 [39389.800012] [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f [39389.800012] Code: f0 0f b1 13 85 c0 75 ef eb 2a f3 90 8a 03 84 c0 75 f8 f0 0f b0 13 84 c0 75 f0 ba ff 00 00 00 eb 0a f0 0f b1 13 ff c8 74 0b f3 90 <8b> 03 83 f8 01 75 f7 eb ed c6 43 04 00 5b 5d c3 0f 1f 44 00 00 This happens because in the code path executed by the inode_paths ioctl we end up nesting two calls to read lock a leaf's rwlock when after the first call to read_lock() and before the second call to read_lock(), another task (running the delayed items as part of a transaction commit) has already called write_lock() against the leaf's rwlock. This situation is illustrated by the following diagram: Task A Task B btrfs_ref_to_path() btrfs_commit_transaction() read_lock(&eb->lock); btrfs_run_delayed_items() __btrfs_commit_inode_delayed_items() __btrfs_update_delayed_inode() btrfs_lookup_inode() write_lock(&eb->lock); --> task waits for lock read_lock(&eb->lock); --> makes this task hang forever (and task B too of course) So fix this by avoiding doing the nested read lock, which is easily avoidable. This issue does not happen if task B calls write_lock() after task A does the second call to read_lock(), however there does not seem to exist anything in the documentation that mentions what is the expected behaviour for recursive locking of rwlocks (leaving the idea that doing so is not a good usage of rwlocks). Also, as a side effect necessary for this fix, make sure we do not needlessly read lock extent buffers when the input path has skip_locking set (used when called from send). Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
