Pull RISC-V fixes from Palmer Dabbelt:

 - A few DT bindings fixes to more closely align the ISA string
   requirements between the bindings and the ISA manual.

 - A handful of build error/warning fixes.

 - A fix to move init_cpu_topology() later in the boot flow, so it can
   allocate memory.

 - The IRC channel is now in the MAINTAINERS file, so it's easier to
   find.

* tag 'riscv-for-linus-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Move call to init_cpu_topology() to later initialization stage
  riscv/kprobe: Fix instruction simulation of JALR
  riscv: fix -Wundef warning for CONFIG_RISCV_BOOT_SPINWAIT
  MAINTAINERS: add an IRC entry for RISC-V
  RISC-V: fix compile error from deduplicated __ALTERNATIVE_CFG_2
  dt-bindings: riscv: fix single letter canonical order
  dt-bindings: riscv: fix underscore requirement for multi-letter extensions

Pull ARM fixes from Russell King:

 - fix nommu assignment build warning

 - fix -Wundef preprocessor warning

 - reduce __thumb2__ definitions for crypto files that require it

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9287/1: Reduce __thumb2__ definition to crypto files that require it
  ARM: 9284/1: include <asm/pgtable.h> from proc-macros.S to fix -Wundef warnings
  ARM: 9280/1: mm: fix warning on phys_addr_t to void pointer assignment

Merge tag 'linux-kselftest-fixes-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:
 "A single fix to a amd-pstate test Makefile bug that deletes source
  files during make clean run"

* tag 'linux-kselftest-fixes-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: amd-pstate: Don't delete source files via Makefile

Merge tag 'platform-drivers-x86-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 -  Fix false positive apple_gmux backlight detection on older iGPU only
    MacBook models

 -  Various other small fixes and hardware-id additions

* tag 'platform-drivers-x86-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: thinkpad_acpi: Fix profile modes on Intel platforms
  ACPI: video: Fix apple gmux detection
  platform/x86: apple-gmux: Add apple_gmux_detect() helper
  platform/x86: apple-gmux: Move port defines to apple-gmux.h
  platform/x86: hp-wmi: Fix cast to smaller integer type warning
  platform/x86/amd: pmc: Add a module parameter to disable workarounds
  platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN
  platform/x86: asus-wmi: Fix kbd_dock_devid tablet-switch reporting
  platform/x86: gigabyte-wmi: add support for B450M DS3H WIFI-CF
  platform/x86: hp-wmi: Handle Omen Key event
  platform/x86: dell-wmi: Add a keymap for KEY_MUTE in type 0x0010 table

Pull networking fixes from Paolo Abeni:
 "Including fixes from netfilter.

  Current release - regressions:

   - sched: sch_taprio: do not schedule in taprio_reset()

  Previous releases - regressions:

   - core: fix UaF in netns ops registration error path

   - ipv4: prevent potential spectre v1 gadgets

   - ipv6: fix reachability confirmation with proxy_ndp

   - netfilter: fix for the set rbtree

   - eth: fec: use page_pool_put_full_page when freeing rx buffers

   - eth: iavf: fix temporary deadlock and failure to set MAC address

  Previous releases - always broken:

   - netlink: prevent potential spectre v1 gadgets

   - netfilter: fixes for SCTP connection tracking

   - mctp: struct sock lifetime fixes

   - eth: ravb: fix possible hang if RIS2_QFF1 happen

   - eth: tg3: resolve deadlock in tg3_reset_task() during EEH

  Misc:

   - Mat stepped out as MPTCP co-maintainer"

* tag 'net-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits)
  net: mdio-mux-meson-g12a: force internal PHY off on mux switch
  docs: networking: Fix bridge documentation URL
  tsnep: Fix TX queue stop/wake for multiple queues
  net/tg3: resolve deadlock in tg3_reset_task() during EEH
  net: mctp: mark socks as dead on unhash, prevent re-add
  net: mctp: hold key reference when looking up a general key
  net: mctp: move expiry timer delete to unhash
  net: mctp: add an explicit reference from a mctp_sk_key to sock
  net: ravb: Fix possible hang if RIS2_QFF1 happen
  net: ravb: Fix lack of register setting after system resumed for Gen3
  net/x25: Fix to not accept on connected socket
  ice: move devlink port creation/deletion
  sctp: fail if no bound addresses can be used for a given scope
  net/sched: sch_taprio: do not schedule in taprio_reset()
  Revert "Merge branch 'ethtool-mac-merge'"
  netrom: Fix use-after-free of a listening socket.
  netfilter: conntrack: unify established states for SCTP paths
  Revert "netfilter: conntrack: add sctp DATA_SENT state"
  netfilter: conntrack: fix bug in for_each_sctp_chunk
  netfilter: conntrack: fix vtag checks for ABORT/SHUTDOWN_COMPLETE
  ...

I'm not exactly clear on what strange workflow causes people to do it,
but clearly occasionally some files end up being committed as executable
even though they clearly aren't.

This is a reprise of commit 90fda63f ("treewide: fix up files
incorrectly marked executable"), just with a different set of files (but
with the same trivial shell scripting).

So apparently we need to re-do this every five years or so, and Joe
needs to just keep reminding me to do so ;)
Reported-by: Joe Perches <joe@perches.com>
Fixes: 523375c9 ("drm/vmwgfx: Port vmwgfx to arm64")
Fixes: 5c439937 ("ASoC: codecs: add support for ES8326")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Force the internal PHY off then on when switching to the internal path.
This fixes problems where the PHY ID is not properly set.

Fixes: 70904251 ("net: phy: add amlogic g12a mdio mux support")
Suggested-by: Qi Duan <qi.duan@amlogic.com>
Co-developed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20230124101157.232234-1-jbrunet@baylibre.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Current documentation URL [1] is no longer valid.

[1] https://www.linuxfoundation.org/collaborate/workgroups/networking/bridgeSigned-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230124145127.189221-1-ivecera@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

netif_stop_queue() and netif_wake_queue() act on TX queue 0. This is ok
as long as only a single TX queue is supported. But support for multiple
TX queues was introduced with 76203137 and I missed to adapt stop
and wake of TX queues.

Use netif_stop_subqueue() and netif_tx_wake_queue() to act on specific
TX queue.

Fixes: 76203137 ("tsnep: Support multiple TX/RX queue pairs")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://lore.kernel.org/r/20230124191440.56887-1-gerhard@engleder-embedded.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

During EEH error injection testing, a deadlock was encountered in the tg3
driver when tg3_io_error_detected() was attempting to cancel outstanding
reset tasks:

crash> foreach UN bt
...
PID: 159    TASK: c0000000067c6000  CPU: 8   COMMAND: "eehd"
...
 #5 [c00000000681f990] __cancel_work_timer at c00000000019fd18
 #6 [c00000000681fa30] tg3_io_error_detected at c00800000295f098 [tg3]
 #7 [c00000000681faf0] eeh_report_error at c00000000004e25c
...

PID: 290    TASK: c000000036e5f800  CPU: 6   COMMAND: "kworker/6:1"
...
 #4 [c00000003721fbc0] rtnl_lock at c000000000c940d8
 #5 [c00000003721fbe0] tg3_reset_task at c008000002969358 [tg3]
 #6 [c00000003721fc60] process_one_work at c00000000019e5c4
...

PID: 296    TASK: c000000037a65800  CPU: 21  COMMAND: "kworker/21:1"
...
 #4 [c000000037247bc0] rtnl_lock at c000000000c940d8
 #5 [c000000037247be0] tg3_reset_task at c008000002969358 [tg3]
 #6 [c000000037247c60] process_one_work at c00000000019e5c4
...

PID: 655    TASK: c000000036f49000  CPU: 16  COMMAND: "kworker/16:2"
...:1

 #4 [c0000000373ebbc0] rtnl_lock at c000000000c940d8
 #5 [c0000000373ebbe0] tg3_reset_task at c008000002969358 [tg3]
 #6 [c0000000373ebc60] process_one_work at c00000000019e5c4
...

Code inspection shows that both tg3_io_error_detected() and
tg3_reset_task() attempt to acquire the RTNL lock at the beginning of
their code blocks.  If tg3_reset_task() should happen to execute between
the times when tg3_io_error_deteced() acquires the RTNL lock and
tg3_reset_task_cancel() is called, a deadlock will occur.

Moving tg3_reset_task_cancel() call earlier within the code block, prior
to acquiring RTNL, prevents this from happening, but also exposes another
deadlock issue where tg3_reset_task() may execute AFTER
tg3_io_error_detected() has executed:

crash> foreach UN bt
PID: 159    TASK: c0000000067d2000  CPU: 9   COMMAND: "eehd"
...
 #4 [c000000006867a60] rtnl_lock at c000000000c940d8
 #5 [c000000006867a80] tg3_io_slot_reset at c0080000026c2ea8 [tg3]
 #6 [c000000006867b00] eeh_report_reset at c00000000004de88
...
PID: 363    TASK: c000000037564000  CPU: 6   COMMAND: "kworker/6:1"
...
 #3 [c000000036c1bb70] msleep at c000000000259e6c
 #4 [c000000036c1bba0] napi_disable at c000000000c6b848
 #5 [c000000036c1bbe0] tg3_reset_task at c0080000026d942c [tg3]
 #6 [c000000036c1bc60] process_one_work at c00000000019e5c4
...

This issue can be avoided by aborting tg3_reset_task() if EEH error
recovery is already in progress.

Fixes: db84bf43 ("tg3: tg3_reset_task() needs to use rtnl_lock to synchronize")
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230124185339.225806-1-drc@linux.vnet.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull fuse ACL fix from Christian Brauner:
 "The new posix acl API doesn't depend on the xattr handler
  infrastructure anymore and instead only relies on the posix acl inode
  operations. As a result daemons without FUSE_POSIX_ACL are unable to
  use posix acls like they used to.

  Fix this by copying what we did for overlayfs during the posix acl api
  conversion. Make fuse implement a dedicated ->get_inode_acl() method
  as does overlayfs. Fuse can then also uses this to express different
  needs for vfs permission checking during lookup and acl based
  retrieval via the regular system call path.

  This allows fuse to continue to refuse retrieving posix acls for
  daemons that don't set FUSE_POSXI_ACL for permission checking while
  also allowing a fuse server to retrieve it via the usual system calls"

* tag 'fs.fuse.acl.v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
  fuse: fixes after adapting to new posix acl api

Revert the portion of a recent Makefile change that incorrectly
deletes source files when doing "make clean".

Fixes: ba2d788a ("selftests: amd-pstate: Trigger tbench benchmark and test cpus")
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

If "capacity-dmips-mhz" is present in a CPU DT node,
topology_parse_cpu_capacity() will fail to allocate memory.  arm64, with
which this code path is shared, does not call
topology_parse_cpu_capacity() until later in boot where memory
allocation is available.  While "capacity-dmips-mhz" is not yet a valid
property on RISC-V, invalid properties should be ignored rather than
cause issues.  Move init_cpu_topology(), which calls
topology_parse_cpu_capacity(), to a later initialization stage, to match
arm64.

As a side effect of this change, RISC-V is "protected" from changes to
core topology code that would work on arm64 where memory allocation is
safe but on RISC-V isn't.

Fixes: 03f11f03 ("RISC-V: Parse cpu topology during boot.")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Link: https://lore.kernel.org/r/20230105033705.3946130-1-leyfoon.tan@starfivetech.com
[Palmer: use Conor's commit text]
Link: https://lore.kernel.org/linux-riscv/20230104183033.755668-1-pierre.gondois@arm.com/T/#me592d4c8b9508642954839f0077288a353b0b9b2Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Jeremy Kerr says:

====================
net: mctp: struct sock lifetime fixes

This series is a set of fixes for the sock lifetime handling in the
AF_MCTP code, fixing a uaf reported by Noam Rathaus
<noamr@ssd-disclosure.com>.

The Fixes: tags indicate the original patches affected, but some
tweaking to backport to those commits may be needed; I have a separate
branch with backports to 5.15 if that helps with stable trees.

Of course, any comments/queries most welcome.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Once a socket has been unhashed, we want to prevent it from being
re-used in a sk_key entry as part of a routing operation.

This change marks the sk as SOCK_DEAD on unhash, which prevents addition
into the net's key list.

We need to do this during the key add path, rather than key lookup, as
we release the net keys_lock between those operations.

Fixes: 4a992bbd ("mctp: Implement message fragmentation & reassembly")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, we have a race where we look up a sock through a "general"
(ie, not directly associated with the (src,dest,tag) tuple) key, then
drop the key reference while still holding the key's sock.

This change expands the key reference until we've finished using the
sock, and hence the sock reference too.

Commit message changes from Jeremy Kerr <jk@codeconstruct.com.au>.
Reported-by: Noam Rathaus <noamr@ssd-disclosure.com>
Fixes: 73c61845 ("mctp: locking, lifetime and validity changes for sk_keys")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, we delete the key expiry timer (in sk->close) before
unhashing the sk. This means that another thread may find the sk through
its presence on the key list, and re-queue the timer.

This change moves the timer deletion to the unhash, after we have made
the key no longer observable, so the timer cannot be re-queued.

Fixes: 7b14e15a ("mctp: Implement a timeout for tags")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, we correlate the mctp_sk_key lifetime to the sock lifetime
through the sock hash/unhash operations, but this is pretty tenuous, and
there are cases where we may have a temporary reference to an unhashed
sk.

This change makes the reference more explicit, by adding a hold on the
sock when it's associated with a mctp_sk_key, released on final key
unref.

Fixes: 73c61845 ("mctp: locking, lifetime and validity changes for sk_keys")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Yoshihiro Shimoda says:

====================
net: ravb: Fix potential issues

Fix potentiall issues on the ravb driver.

Changes from v2:
https://lore.kernel.org/all/20230123131331.1425648-1-yoshihiro.shimoda.uh@renesas.com/
 - Add Reviewed-by in the patch [2/2].
 - Add a commit description in the patch [2/2].

Changes from v1:
https://lore.kernel.org/all/20230119043920.875280-1-yoshihiro.shimoda.uh@renesas.com/
 - Fix typo in the patch [1/2].
 - Add Reviewed-by in the patch [1/2].
 - Fix "Fixed" tag in the patch [2/2].
 - Fix a comment indentation of the code in the patch [2/2].
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Since this driver enables the interrupt by RIC2_QFE1, this driver
should clear the interrupt flag if it happens. Otherwise, the interrupt
causes to hang the system.

Note that this also fix a minor coding style (a comment indentation)
around the fixed code.

Fixes: c156633f ("Renesas Ethernet AVB driver proper")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

After system entered Suspend to RAM, registers setting of this
hardware is reset because the SoC will be turned off. On R-Car Gen3
(info->ccc_gac), ravb_ptp_init() is called in ravb_probe() only. So,
after system resumed, it lacks of the initial settings for ptp. So,
add ravb_ptp_{init,stop}() into ravb_{resume,suspend}().

Fixes: f5d7837f ("ravb: ptp: Add CONFIG mode support")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

My last commit to fix profile mode displays on AMD platforms caused
an issue on Intel platforms - sorry!

In it I was reading the current functional mode (MMC, PSC, AMT) from
the BIOS but didn't account for the fact that on some of our Intel
platforms I use a different API which returns just the profile and not
the functional mode.

This commit fixes it so that on Intel platforms it knows the functional
mode is always MMC.

I also fixed a potential problem that a platform may try to set the mode
for both MMC and PSC - which was incorrect.

Tested on X1 Carbon 9 (Intel) and Z13 (AMD).

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216963
Fixes: fde5f74c ("platform/x86: thinkpad_acpi: Fix profile mode display in AMT mode")
Cc: stable@vger.kernel.org
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230124153623.145188-1-mpearson-lenovo@squebb.caReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

When listen() and accept() are called on an x25 socket
that connect() succeeds, accept() succeeds immediately.
This is because x25_connect() queues the skb to
sk->sk_receive_queue, and x25_accept() dequeues it.

This creates a child socket with the sk of the parent
x25 socket, which can cause confusion.

Fix x25_listen() to return -EINVAL if the socket has
already been successfully connect()ed to avoid this issue.
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set kprobe at 'jalr 1140(ra)' of vfs_write results in the following
crash:

[   32.092235] Unable to handle kernel access to user memory without uaccess routines at virtual address 00aaaaaad77b1170
[   32.093115] Oops [#1]
[   32.093251] Modules linked in:
[   32.093626] CPU: 0 PID: 135 Comm: ftracetest Not tainted 6.2.0-rc2-00013-gb0aa5e5df0cb-dirty #16
[   32.093985] Hardware name: riscv-virtio,qemu (DT)
[   32.094280] epc : ksys_read+0x88/0xd6
[   32.094855]  ra : ksys_read+0xc0/0xd6
[   32.095016] epc : ffffffff801cda80 ra : ffffffff801cdab8 sp : ff20000000d7bdc0
[   32.095227]  gp : ffffffff80f14000 tp : ff60000080f9cb40 t0 : ffffffff80f13e80
[   32.095500]  t1 : ffffffff8000c29c t2 : ffffffff800dbc54 s0 : ff20000000d7be60
[   32.095716]  s1 : 0000000000000000 a0 : ffffffff805a64ae a1 : ffffffff80a83708
[   32.095921]  a2 : ffffffff80f160a0 a3 : 0000000000000000 a4 : f229b0afdb165300
[   32.096171]  a5 : f229b0afdb165300 a6 : ffffffff80eeebd0 a7 : 00000000000003ff
[   32.096411]  s2 : ff6000007ff76800 s3 : fffffffffffffff7 s4 : 00aaaaaad77b1170
[   32.096638]  s5 : ffffffff80f160a0 s6 : ff6000007ff76800 s7 : 0000000000000030
[   32.096865]  s8 : 00ffffffc3d97be0 s9 : 0000000000000007 s10: 00aaaaaad77c9410
[   32.097092]  s11: 0000000000000000 t3 : ffffffff80f13e48 t4 : ffffffff8000c29c
[   32.097317]  t5 : ffffffff8000c29c t6 : ffffffff800dbc54
[   32.097505] status: 0000000200000120 badaddr: 00aaaaaad77b1170 cause: 000000000000000d
[   32.098011] [<ffffffff801cdb72>] ksys_write+0x6c/0xd6
[   32.098222] [<ffffffff801cdc06>] sys_write+0x2a/0x38
[   32.098405] [<ffffffff80003c76>] ret_from_syscall+0x0/0x2

Since the rs1 and rd might be the same one, such as 'jalr 1140(ra)',
hence it requires obtaining the target address from rs1 followed by
updating rd.

Fixes: c22b0bcb ("riscv: Add kprobes supported")
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230116064342.2092136-1-liaochang1@huawei.com
[Palmer: Pick Guo's cleanup]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Perform SCTP vtag verification for ABORT/SHUTDOWN_COMPLETE according
   to RFC 9260, Sect 8.5.1.

2) Fix infinite loop if SCTP chunk size is zero in for_each_sctp_chunk().
   And remove useless check in this macro too.

3) Revert DATA_SENT state in the SCTP tracker, this was applied in the
   previous merge window. Next patch in this series provides a more
   simple approach to multihoming support.

4) Unify HEARTBEAT_ACKED and ESTABLISHED states for SCTP multihoming
   support, use default ESTABLISHED of 210 seconds based on
   heartbeat timeout * maximum number of retransmission + round-trip timeout.
   Otherwise, SCTP conntrack entry that represents secondary paths
   remain stale in the table for up to 5 days.

This is a slightly large batch with fixes for the SCTP connection
tracking helper, all patches from Sriram Yagnaraman.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: conntrack: unify established states for SCTP paths
  Revert "netfilter: conntrack: add sctp DATA_SENT state"
  netfilter: conntrack: fix bug in for_each_sctp_chunk
  netfilter: conntrack: fix vtag checks for ABORT/SHUTDOWN_COMPLETE
====================

Link: https://lore.kernel.org/r/20230124183933.4752-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit a286ba73 ("ice: reorder PF/representor devlink
port register/unregister flows") moved the code to create
and destroy the devlink PF port. This was fine, but created
a corner case issue in the case of ice_register_netdev()
failing. In that case, the driver would end up calling
ice_devlink_destroy_pf_port() twice.

Additionally, it makes no sense to tie creation of the devlink
PF port to the creation of the netdev so separate out the
code to create/destroy the devlink PF port from the netdev
code. This makes it a cleaner interface.

Fixes: a286ba73 ("ice: reorder PF/representor devlink port register/unregister flows")
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230124005714.3996270-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, if you bind the socket to something like:
        servaddr.sin6_family = AF_INET6;
        servaddr.sin6_port = htons(0);
        servaddr.sin6_scope_id = 0;
        inet_pton(AF_INET6, "::1", &servaddr.sin6_addr);

And then request a connect to:
        connaddr.sin6_family = AF_INET6;
        connaddr.sin6_port = htons(20000);
        connaddr.sin6_scope_id = if_nametoindex("lo");
        inet_pton(AF_INET6, "fe88::1", &connaddr.sin6_addr);

What the stack does is:
 - bind the socket
 - create a new asoc
 - to handle the connect
   - copy the addresses that can be used for the given scope
   - try to connect

But the copy returns 0 addresses, and the effect is that it ends up
trying to connect as if the socket wasn't bound, which is not the
desired behavior. This unexpected behavior also allows KASLR leaks
through SCTP diag interface.

The fix here then is, if when trying to copy the addresses that can
be used for the scope used in connect() it returns 0 addresses, bail
out. This is what TCP does with a similar reproducer.
Reported-by: Pietro Borrello <borrello@diag.uniroma1.it>
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/9fcd182f1099f86c6661f3717f63712ddd1c676c.1674496737.git.marcelo.leitner@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull module fix from Luis Chamberlain:
 "Theis is a fix we have been delaying for v6.2 due to lack of early
  testing on linux-next.

  The commit has been sitting in linux-next since December and testing
  has also been now a bit extensive by a few developers. Since this is a
  fix which definitely will go to v6.3 it should also apply to v6.2 so
  if there are any issues we pick them up earlier rather than later. The
  fix fixes a regression since v5.3, prior to me helping with module
  maintenance, however, the issue is real in that in the worst case now
  can prevent boot.

  We've discussed all possible corner cases [0] and at last do feel this
  is ready for v6.2-rc6"

Link https://lore.kernel.org/all/Y9A4fiobL6IHp%2F%2FP@bombadil.infradead.org/ [0]

* tag 'modules-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  module: Don't wait for GOING modules

As reported by syzbot and hinted by Vinicius, I should not have added
a qdisc_synchronize() call in taprio_reset()

taprio_reset() can be called with qdisc spinlock held (and BH disabled)
as shown in included syzbot report [1].

Only taprio_destroy() needed this synchronization, as explained
in the blamed commit changelog.

[1]

BUG: scheduling while atomic: syz-executor150/5091/0x00000202
2 locks held by syz-executor150/5091:
Modules linked in:
Preemption disabled at:
[<0000000000000000>] 0x0
Kernel panic - not syncing: scheduling while atomic: panic_on_warn set ...
CPU: 1 PID: 5091 Comm: syz-executor150 Not tainted 6.2.0-rc3-syzkaller-00219-g010a74f5 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106
panic+0x2cc/0x626 kernel/panic.c:318
check_panic_on_warn.cold+0x19/0x35 kernel/panic.c:238
__schedule_bug.cold+0xd5/0xfe kernel/sched/core.c:5836
schedule_debug kernel/sched/core.c:5865 [inline]
__schedule+0x34e4/0x5450 kernel/sched/core.c:6500
schedule+0xde/0x1b0 kernel/sched/core.c:6682
schedule_timeout+0x14e/0x2a0 kernel/time/timer.c:2167
schedule_timeout_uninterruptible kernel/time/timer.c:2201 [inline]
msleep+0xb6/0x100 kernel/time/timer.c:2322
qdisc_synchronize include/net/sch_generic.h:1295 [inline]
taprio_reset+0x93/0x270 net/sched/sch_taprio.c:1703
qdisc_reset+0x10c/0x770 net/sched/sch_generic.c:1022
dev_reset_queue+0x92/0x130 net/sched/sch_generic.c:1285
netdev_for_each_tx_queue include/linux/netdevice.h:2464 [inline]
dev_deactivate_many+0x36d/0x9f0 net/sched/sch_generic.c:1351
dev_deactivate+0xed/0x1b0 net/sched/sch_generic.c:1374
qdisc_graft+0xe4a/0x1380 net/sched/sch_api.c:1080
tc_modify_qdisc+0xb6b/0x19a0 net/sched/sch_api.c:1689
rtnetlink_rcv_msg+0x43e/0xca0 net/core/rtnetlink.c:6141
netlink_rcv_skb+0x165/0x440 net/netlink/af_netlink.c:2564
netlink_unicast_kernel net/netlink/af_netlink.c:1330 [inline]
netlink_unicast+0x547/0x7f0 net/netlink/af_netlink.c:1356
netlink_sendmsg+0x91b/0xe10 net/netlink/af_netlink.c:1932
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xd3/0x120 net/socket.c:734
____sys_sendmsg+0x712/0x8c0 net/socket.c:2476
___sys_sendmsg+0x110/0x1b0 net/socket.c:2530
__sys_sendmsg+0xf7/0x1c0 net/socket.c:2559
do_syscall_x64 arch/x86/entry/common.c:50 [inline]

Fixes: 3a415d59 ("net/sched: sch_taprio: fix possible use-after-free")
Link: https://lore.kernel.org/netdev/167387581653.2747.13878941339893288655.git-patchwork-notify@kernel.org/T/Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20230123084552.574396-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull rust fix from Miguel Ojeda:

 - Avoid evaluating arguments in 'pr_*' macros in 'unsafe' blocks

* tag 'rust-fixes-6.2' of https://github.com/Rust-for-Linux/linux:
  rust: print: avoid evaluating arguments in `pr_*` macros in `unsafe` blocks

Pull kvm fixes from Paolo Bonzini:
 "ARM64:

   - Pass the correct address to mte_clear_page_tags() on initialising a
     tagged page

   - Plug a race against a GICv4.1 doorbell interrupt while saving the
     vgic-v3 pending state.

  x86:

   - A command line parsing fix and a clang compilation fix for
     selftests

   - A fix for a longstanding VMX issue, that surprisingly was only
     found now to affect real world guests"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: selftests: Make reclaim_period_ms input always be positive
  KVM: x86/vmx: Do not skip segment attributes if unusable bit is set
  selftests: kvm: move declaration at the beginning of main()
  KVM: arm64: GICv4.1: Fix race with doorbell on VPE activation/deactivation
  KVM: arm64: Pass the actual page address to mte_clear_page_tags()

Pull SCSI fixes from James Bottomley:
 "Six fixes, all in drivers.

  The biggest are the UFS devfreq fixes which address a lock inversion
  and the two iscsi_tcp fixes which try to prevent a use after free from
  userspace still accessing an area which the kernel has released (seen
  by KASAN)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: device_handler: alua: Remove a might_sleep() annotation
  scsi: iscsi_tcp: Fix UAF during login when accessing the shost ipaddress
  scsi: iscsi_tcp: Fix UAF during logout when accessing the shost ipaddress
  scsi: ufs: core: Fix devfreq deadlocks
  scsi: hpsa: Fix allocation size for scsi_host_alloc()
  scsi: target: core: Fix warning on RT kernels

Pull nfsd fix from Chuck Lever:

 - Nail another UAF in NFSD's filecache

* tag 'nfsd-6.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: don't free files unconditionally in __nfsd_file_cache_purge

Pull fscrypt MAINTAINERS entry update from Eric Biggers:
 "Update the MAINTAINERS file entry for fscrypt"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
  MAINTAINERS: update fscrypt git repo

During a system boot, it can happen that the kernel receives a burst of
requests to insert the same module but loading it eventually fails
during its init call. For instance, udev can make a request to insert
a frequency module for each individual CPU when another frequency module
is already loaded which causes the init function of the new module to
return an error.

Since commit 6e6de3de ("kernel/module.c: Only return -EEXIST for
modules that have finished loading"), the kernel waits for modules in
MODULE_STATE_GOING state to finish unloading before making another
attempt to load the same module.

This creates unnecessary work in the described scenario and delays the
boot. In the worst case, it can prevent udev from loading drivers for
other devices and might cause timeouts of services waiting on them and
subsequently a failed boot.

This patch attempts a different solution for the problem 6e6de3de
was trying to solve. Rather than waiting for the unloading to complete,
it returns a different error code (-EBUSY) for modules in the GOING
state. This should avoid the error situation that was described in
6e6de3de (user space attempting to load a dependent module because
the -EEXIST error code would suggest to user space that the first module
had been loaded successfully), while avoiding the delay situation too.

This has been tested on linux-next since December 2022 and passes
all kmod selftests except test 0009 with module compression enabled
but it has been confirmed that this issue has existed and has gone
unnoticed since prior to this commit and can also be reproduced without
module compression with a simple usleep(5000000) on tools/modprobe.c [0].
These failures are caused by hitting the kernel mod_concurrent_max and can
happen either due to a self inflicted kernel module auto-loead DoS somehow
or on a system with large CPU count and each CPU count incorrectly triggering
many module auto-loads. Both of those issues need to be fixed in-kernel.

[0] https://lore.kernel.org/all/Y9A4fiobL6IHp%2F%2FP@bombadil.infradead.org/

Fixes: 6e6de3de ("kernel/module.c: Only return -EEXIST for modules that have finished loading")
Co-developed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Petr Mladek <pmladek@suse.com>
[mcgrof: enhance commit log with testing and kmod test result interpretation ]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>

Pull fsverity MAINTAINERS entry update from Eric Biggers:
 "Update the MAINTAINERS file entry for fsverity"

* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
  MAINTAINERS: update fsverity git repo, list, and patchwork

Commit f3bbac32 ("ext4: deal with legacy signed xattr name hash
values") added a hashing function for the legacy case of having the
xattr hash calculated using a signed 'char' type.  It left the unsigned
case alone, since it's all implicitly handled by the '-funsigned-char'
compiler option.

However, there's been some noise about back-porting it all into stable
kernels that lack the '-funsigned-char', so let's just make that at
least possible by making the whole 'this uses unsigned char' very
explicit in the code itself.  Whether such a back-port is really
warranted or not, I'll leave to others, but at least together with this
change it is technically sensible.

Also, add a 'pr_warn_once()' for reporting the "hey, signedness for this
hash calculation has changed" issue.  Hopefully it never triggers except
for that xfstests generic/454 test-case, but even if it does it's just
good information to have.

If for no other reason than "we can remove the legacy signed hash code
entirely if nobody ever sees the message any more".

Cc: Sasha Levin <sashal@kernel.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Theodore Ts'o <tytso@mit.edu>,
Cc: Jason Donenfeld <Jason@zx2c4.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 0ad999c1, reversing
changes made to e38553bd.

It was not intended for net.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This cycle we ported all filesystems to the new posix acl api. While
looking at further simplifications in this area to remove the last
remnants of the generic dummy posix acl handlers we realized that we
regressed fuse daemons that don't set FUSE_POSIX_ACL but still make use
of posix acls.

With the change to a dedicated posix acl api interacting with posix acls
doesn't go through the old xattr codepaths anymore and instead only
relies the get acl and set acl inode operations.

Before this change fuse daemons that don't set FUSE_POSIX_ACL were able
to get and set posix acl albeit with two caveats. First, that posix acls
aren't cached. And second, that they aren't used for permission checking
in the vfs.

We regressed that use-case as we currently refuse to retrieve any posix
acls if they aren't enabled via FUSE_POSIX_ACL. So older fuse daemons
would see a change in behavior.

We can restore the old behavior in multiple ways. We could change the
new posix acl api and look for a dedicated xattr handler and if we find
one prefer that over the dedicated posix acl api. That would break the
consistency of the new posix acl api so we would very much prefer not to
do that.

We could introduce a new ACL_*_CACHE sentinel that would instruct the
vfs permission checking codepath to not call into the filesystem and
ignore acls.

But a more straightforward fix for v6.2 is to do the same thing that
Overlayfs does and give fuse a separate get acl method for permission
checking. Overlayfs uses this to express different needs for vfs
permission lookup and acl based retrieval via the regular system call
path as well. Let fuse do the same for now. This way fuse can continue
to refuse to retrieve posix acls for daemons that don't set
FUSE_POSXI_ACL for permission checking while allowing a fuse server to
retrieve it via the usual system calls.

In the future, we could extend the get acl inode operation to not just
pass a simple boolean to indicate rcu lookup but instead make it a flag
argument. Then in addition to passing the information that this is an
rcu lookup to the filesystem we could also introduce a flag that tells
the filesystem that this is a request from the vfs to use these acls for
permission checking. Then fuse could refuse the get acl request for
permission checking when the daemon doesn't have FUSE_POSIX_ACL set in
the same get acl method. This would also help Overlayfs and allow us to
remove the second method for it as well.

But since that change is more invasive as we need to update the get acl
inode operation for multiple filesystems we should not do this as a fix
for v6.2. Instead we will do this for the v6.3 merge window.

Fwiw, since posix acls are now always correctly translated in the new
posix acl api we could also allow them to be used for daemons without
FUSE_POSIX_ACL that are not mounted on the host. But this is behavioral
change and again if dones should be done for v6.3. For now, let's just
restore the original behavior.

A nice side-effect of this change is that for fuse daemons with and
without FUSE_POSIX_ACL the same code is used for posix acls in a
backwards compatible way. This also means we can remove the legacy xattr
handlers completely. We've also added comments to explain the expected
behavior for daemons without FUSE_POSIX_ACL into the code.

Fixes: 318e6685 ("xattr: use posix acl api")
Signed-off-by: Seth Forshee (Digital Ocean) <sforshee@kernel.org>
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

Some apple laptop models have an ACPI device with a HID of APP000B
and that device has an IO resource (so it does not describe the new
unsupported MMIO based gmux type), but there actually is no gmux
in the laptop at all.

The gmux_probe() function of the actual apple-gmux driver has code
to detect this, this code has been factored out into a new
apple_gmux_detect() helper in apple-gmux.h.

Use this new function to fix acpi_video_get_backlight_type() wrongly
returning apple_gmux as type on the following laptops:

MacBookPro5,4
https://pastebin.com/8Xjq7RhS

MacBookPro8,1
https://linux-hardware.org/?probe=e513cfbadb&log=dmesg

MacBookPro9,2
https://bugzilla.kernel.org/attachment.cgi?id=278961

MacBookPro10,2
https://lkml.org/lkml/2014/9/22/657

MacBookPro11,2
https://forums.fedora-fr.org/viewtopic.php?id=70142

MacBookPro11,4
https://raw.githubusercontent.com/im-0/investigate-card-reader-suspend-problem-on-mbp11.4/mast

Fixes: 21245df3 ("ACPI: video: Add Apple GMUX brightness control detection")
Link: https://lore.kernel.org/platform-driver-x86/20230123113750.462144-1-hdegoede@redhat.com/Reported-by: Emmanouil Kouroupakis <kartebi@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230124105754.62167-4-hdegoede@redhat.com