- 27 Sep, 2018 8 commits
-
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
Driver Changes: - Bugzilla 107600: Fix stuttering video playback on MythTV on old hardware (Chris) - Avoid black screen when using CSC coefficient matrix (Raviraj) - Hammer PDs on Baytrail to make sure they reload (Chris) - Capture some objects if unable to capture all, on error (Chris) - Add W/A for 16 GB DIMMs on SKL+ (Mahesh) - Only enable IPC for symmetric memory configurations on KBL+ (Mahesh) - Assume pipe A to have maximum stride limits (Ville) - Always update update OA contexts via context image (Tvrtko) - Icelake enabling patches (Madhav, Dhinakaran) - Add Icelake DMC firmware (Anusha) - Fixes for CI found corner cases (Chris) - Limit the backpressure for request allocation (Chris) - Park GPU on module load so usage starts from known state (Chris) - Flush tasklet when checking for idle (Chris) - Use coherent write into the context image on BSW+ (Chris) - Fix possible integer overflow for framebuffers that get aligned past 4GiB (Ville) - Downgrade fence timeout from warn to notice and add debug hint (Chris) - Fixes to multi function encoder code (Ville) - Fix sprite plane check logic (Dan, Ville) - PAGE_SIZE vs. I915_GTT_PAGE_SIZE fixes (Ville) - Decode memory bandwidth and parameters for BXT and SKL+ (Mahesh) - Overwrite BIOS set IPC value from KMS (Mahesh) - Multiple pipe handling code cleanups/restructurings/optimizations (Ville) - Spare low 4G address for non-48bit objects (Chris) - Free context_setparam of struct_mutex (Chris) - Delay updating ring register state on resume (Chris) - Avoid unnecessarily copying overlay IOCTL parameters (Chris) - Update GuC power domain states even without submission (Michal) - Restore GuC preempt-context across S3/S4 (Chris) - Add kernel selftest for rapid context switching (Chris) - Keep runtime power management ref for live selftests (Chris) - GEM code cleanups (Matt) Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180927095933.GA11458@jlahtine-desk.ger.corp.intel.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 4.20: UAPI Changes: - None Cross-subsystem Changes: - MAINTAINERS: Move udl, mxsfb, and fsl-dcu into drm-misc (Stefan, Sean) Core Changes: - syncobj: Check condition before returning timeout in schedule() (Chris) Driver Changes: - various: First wave of drm_fbdev_generic_setup() conversions (Noralf) - bochs/virtio: More format byte-order improvements (Gerd) - mxsfb: A couple fixes + add runtime pm support (Leonard) - virtio: Add vmap support for prime objects (Ezequiel) Cc: Stefan Agner <stefan@agner.ch> Cc: Sean Paul <sean@poorly.run> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Gerd Hoffman <kraxel@redhat.com> Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Jernej Skrabec authored
R40 DE2 mixers are similar to those found in A83T, except it needs different clock settings. Add a compatibles for them. Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-14-jernej.skrabec@siol.net
-
Chen-Yu Tsai authored
This reverts commit 3510e7a7. During the 4.19 merge window for drm-misc, two patches critical to supporting the display pipeline on the Allwinner R40 SoC were missed. They were applied later but missed the merge window deadline. As a result 4.19-rc1 kernel would crash on the R40 when it couldn't parse the new device tree structure. We ended up removing support for the R40 display pipeline for 4.19. Since the missing patches are already merged for 4.20, we can now revert the commit that removed support. Signed-off-by:
-
Sean Paul authored
Backmerging 4.19-rc5 to pick up sun4i fix Signed-off-by: -
Dave Airlie authored
Sean Paul requested an -rc5 backmerge from some sun4i fixes. Signed-off-by: -
Dave Airlie authored
- A crash fix founded in recent linux-next from John Garry - One sparse warning fix from Souptick Joarder - Some xxx_unref cleanup from Thomas Zimmermann Signed-off-by:
-
git://linuxtv.org/pinchartl/mediaDave Airlie authored
R-Car DU support for the D3 and E3 SoCs (v4.20) Signed-off-by:
-
- 26 Sep, 2018 19 commits
-
-
Thomas Zimmermann authored
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
Stefan Agner <stefan@agner.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180926114312.23097-1-tzimmermann@suse.de
-
Stefan Agner authored
The driver is mostly in maintenance mode. Using drm-misc is a good fit and should make maintenance a bit easier. Signed-off-by:
Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20180926125034.4095-1-stefan@agner.ch
-
Leonard Crestez authored
The lcdif block is only powered on when display is active so plane updates when not enabled are not valid. Writing to an unpowered IP block is mostly ignored but can trigger bus errors on some chips. Prevent this situation by switching to drm_atomic_helper_commit_tail_rpm and having the drm core ensure atomic_plane_update is only called while the crtc is active. This avoids having to keep track of "enabled" bits inside the mxsfb driver. This also requires handling the vblank event for disable from mxsfb_pipe_disable. Signed-off-by:
Leonard Crestez <leonard.crestez@nxp.com> Suggested-by:
-
Leonard Crestez authored
Since power to the lcdif block can be lost on suspend implement PM_SLEEP_OPS using drm_mode_config_helper_suspend/resume to save/restore the current mode. Signed-off-by:
-
Leonard Crestez authored
Adding lcdif nodes to a power domain currently results in black/corrupted screens or hangs because power is not correctly enabled when required. Ensure power is on when display is active by adding pm_runtime_get/put_sync to mxsfb_pipe_enable/disable. Signed-off-by:
-
Leonard Crestez authored
LCDIF will repeatedly display data from CUR_BUF and set CUR_BUF to NEXT_BUF when done. Since we are only ever writing to NEXT_BUF the display will show an initial corrupt frame. Fix by writing the FB paddr to both CUR_BUF and NEXT_BUF when activating the CRTC. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
-
Leonard Crestez authored
The main axi clk is disabled at the end of mxsfb_crtc_mode_set_nofb and immediately reenabled in mxsfb_enable_controller. Avoid this by moving the handling of axi clk one level up to mxsfb_crtc_enable. Do the same for mxsfb_crtc_disable for symmetry. This shouldn't have any functional effect. Signed-off-by:
-
Thomas Zimmermann authored
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180926115640.24755-1-tzimmermann@suse.de
-
Thomas Zimmermann authored
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by:
-
Sean Paul authored
Another "small driver" moving into drm-misc. Stefan has also offered to co-maintain it. Cc: Marek Vasut <marex@denx.de> Cc: Stefan Agner <stefan@agner.ch> Cc: David Airlie <airlied@linux.ie> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by:
-
Ezequiel Garcia authored
Implement vmap/vunmap so we can export dmabufs to other drivers, such as video4linux. Tested with a virtio-gpu / vivid (virtual capture driver) pipeline, where the vivid driver imports the dmabufs exported by virtio-gpu. Note that dma_buf_vmap() does its own vmap counting, so it's not needed to take care of it in the driver. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Link: http://patchwork.freedesktop.org/patch/msgid/20180925161606.17980-4-ezequiel@collabora.comSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Ezequiel Garcia authored
Currently, virtio_gpu_object_kmap() is only called by virtio_gpufb_create(), when a DRM framebuffer is created. Thus, instead of returning the vmap'ed address, emit a warning if virtio_gpu_object_kmap is called on an already mapped object. With this change, kmap/kunmap calls are now balanced. Signed-off-by:
-
Ezequiel Garcia authored
Implement a virtio_gpu_object_kunmap() to unmap the kernel mapping, and use it in the TTM object destroy path. Signed-off-by:
-
Thomas Zimmermann authored
The function ttm_bo_put releases a reference to a TTM buffer object. The function's name is more aligned to the Linux kernel convention of naming ref-counting function _get and _put. A call to ttm_bo_unref takes the address of the TTM BO object's pointer and clears the pointer's value to NULL. This is not necessary in most cases and sometimes even worked around by the calling code. A call to ttm_bo_put only releases the reference without clearing the pointer. The current behaviour of cleaning the pointer is kept in the calling code, but should be removed if not required in a later patch. Signed-off-by:
Xinliang Liu <z.liuxinliang@hisilicon.com> Signed-off-by:
-
Thomas Zimmermann authored
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by:
-
Souptick Joarder authored
convert drm_atomic_helper_suspend/resume() to use drm_mode_config_helper_suspend/resume(). Fixed one sparse warning by making hibmc_drm_interrupt static. Signed-off-by:
Ajit Negi <ajitn.linux@gmail.com> Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by:
-
John Garry authored
Switch to use Huawei PCI vendor ID macro from pci_ids.h file. In addition, switch to use PCI_VDEVICE() instead of open coding. Signed-off-by:
John Garry <john.garry@huawei.com> Reviewed-by:
-
John Garry authored
Currently the driver overwrites the surface depth provided by the fb helper to give an invalid bpp/surface depth combination. This has been exposed by commit 70109354 ("drm: Reject unknown legacy bpp and depth for drm_mode_addfb ioctl"), which now causes the driver to fail to probe. Fix by not overwriting the surface depth. Fixes: d1667b86 ("drm/hisilicon/hibmc: Add support for frame buffer") Signed-off-by:
-
John Garry authored
In hibmc_drm_fb_create(), when the call to hibmc_framebuffer_init() fails with error, do not store the error code in the HiBMC device frame-buffer pointer, as this will be later checked for non-zero value in hibmc_fbdev_destroy() when our intention is to check for a valid function pointer. This fixes the following crash: [ 9.699791] Unable to handle kernel NULL pointer dereference at virtual address 000000000000001a [ 9.708672] Mem abort info: [ 9.711489] ESR = 0x96000004 [ 9.714570] Exception class = DABT (current EL), IL = 32 bits [ 9.720551] SET = 0, FnV = 0 [ 9.723631] EA = 0, S1PTW = 0 [ 9.726799] Data abort info: [ 9.729702] ISV = 0, ISS = 0x00000004 [ 9.733573] CM = 0, WnR = 0 [ 9.736566] [000000000000001a] user address but active_mm is swapper [ 9.742987] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 9.748614] Modules linked in: [ 9.751694] CPU: 16 PID: 293 Comm: kworker/16:1 Tainted: G W 4.19.0-rc4-next-20180920-00001-g9b0012c #322 [ 9.762681] Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT21 Nemo 2.0 RC0 04/18/2018 [ 9.771915] Workqueue: events work_for_cpu_fn [ 9.776312] pstate: 60000005 (nZCv daif -PAN -UAO) [ 9.781150] pc : drm_mode_object_put+0x0/0x20 [ 9.785547] lr : hibmc_fbdev_fini+0x40/0x58 [ 9.789767] sp : ffff00000af1bcf0 [ 9.793108] x29: ffff00000af1bcf0 x28: 0000000000000000 [ 9.798473] x27: 0000000000000000 x26: ffff000008f66630 [ 9.803838] x25: 0000000000000000 x24: ffff0000095abb98 [ 9.809203] x23: ffff8017db92fe00 x22: ffff8017d2b13000 [ 9.814568] x21: ffffffffffffffea x20: ffff8017d2f80018 [ 9.819933] x19: ffff8017d28a0018 x18: ffffffffffffffff [ 9.825297] x17: 0000000000000000 x16: 0000000000000000 [ 9.830662] x15: ffff0000092296c8 x14: ffff00008939970f [ 9.836026] x13: ffff00000939971d x12: ffff000009229940 [ 9.841391] x11: ffff0000085f8fc0 x10: ffff00000af1b9a0 [ 9.846756] x9 : 000000000000000d x8 : 6620657a696c6169 [ 9.852121] x7 : ffff8017d3340580 x6 : ffff8017d4168000 [ 9.857486] x5 : 0000000000000000 x4 : ffff8017db92fb20 [ 9.862850] x3 : 0000000000002690 x2 : ffff8017d3340480 [ 9.868214] x1 : 0000000000000028 x0 : 0000000000000002 [ 9.873580] Process kworker/16:1 (pid: 293, stack limit = 0x(____ptrval____)) [ 9.880788] Call trace: [ 9.883252] drm_mode_object_put+0x0/0x20 [ 9.887297] hibmc_unload+0x1c/0x80 [ 9.890815] hibmc_pci_probe+0x170/0x3c8 [ 9.894773] local_pci_probe+0x3c/0xb0 [ 9.898555] work_for_cpu_fn+0x18/0x28 [ 9.902337] process_one_work+0x1e0/0x318 [ 9.906382] worker_thread+0x228/0x450 [ 9.910164] kthread+0x128/0x130 [ 9.913418] ret_from_fork+0x10/0x18 [ 9.917024] Code: a94153f3 a8c27bfd d65f03c0 d503201f (f9400c01) [ 9.923180] ---[ end trace 2695ffa0af5be375 ]--- Fixes: d1667b86 ("drm/hisilicon/hibmc: Add support for frame buffer") Signed-off-by:
-
- 25 Sep, 2018 13 commits
-
-
Gerd Hoffmann authored
Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180921134704.12826-7-kraxel@redhat.com
-
Gerd Hoffmann authored
Use DRM_FORMAT_HOST_XRGB8888, so we are using the correct format code on bigendian machines. Also set the quirk_addfb_prefer_host_byte_order mode_config bit so drm_mode_addfb() asks for the correct format code. Both DRM_FORMAT_* and VIRTIO_GPU_FORMAT_* are defined to be little endian, so using a different mapping on bigendian machines is wrong. It's there because of broken drm_mode_addfb() behavior. So with drm_mode_addfb() being fixed we can fix this too. While wading through the code I've noticed we have a little issue in virtio: We attach a format to the bo when it is created (DRM_IOCTL_MODE_CREATE_DUMB), not when we map it as framebuffer (DRM_IOCTL_MODE_ADDFB). Easy way out: Support a single format only. Pick DRM_FORMAT_HOST_XRGB8888, it is the only one actually used in practice. Drop unused mappings in virtio_gpu_translate_format(). With this patch applied both ADDFB and ADDFB2 ioctls work correctly in the virtio-gpu.ko driver on big endian machines. Without the patch only ADDFB (which still seems to be used by the majority of userspace) works correctly. Signed-off-by:
-
Gerd Hoffmann authored
Add bochs_hw_set_*_endian() helper functions, to set the framebuffer byteorder at mode set time. Support both DRM_FORMAT_XRGB8888 and DRM_FORMAT_BGRX8888 framebuffer formats, no matter what the native machine byte order is. Signed-off-by:
-
Gerd Hoffmann authored
Use DRM_FORMAT_HOST_XRGB8888, so we are using the correct format code on bigendian machines. Also set the quirk_addfb_prefer_host_byte_order mode_config bit so drm_mode_addfb() asks for the correct format code. Create our own plane and use drm_crtc_init_with_planes() instead of depending on the default created by drm_crtc_init(). That way the plane format list is correct on bigendian machines. Also re-add the framebuffer format check dropped by "df2052cc bochs: convert to drm_fb_helper_fbdev_setup/teardown". With this patch applied both ADDFB and ADDFB2 ioctls work correctly in the bochs-drm.ko driver on big endian machines. Without the patch only ADDFB (which still seems to be used by the majority of userspace) works correctly. Signed-off-by:
-
Gerd Hoffmann authored
Creating framebuffers for fbdev emulation should use the correct format code too, so switch drm_gem_fbdev_fb_create() over to use the new drm_driver_legacy_fb_format() function. Signed-off-by:
-
Gerd Hoffmann authored
Turns out we need the pixel format fixup not only for the addfb ioctl, but also for fbdev emulation code. Ideally we would place it in drm_mode_legacy_fb_format(). That would create alot of churn though, and most drivers don't care because they never ever run on a big endian platform. So add a new drm_driver_legacy_fb_format() function instead which looks at the mode_config->quirk_addfb_prefer_host_byte_order flag. Signed-off-by:
-
Gerd Hoffmann authored
Pass virtio_gpu_object down to virtio_gpu_cmd_transfer_to_host_2d and virtio_gpu_cmd_transfer_to_host_3d functions, instead of passing just the virtio resource handle. This is needed to lookup the scatter list of the object, for dma sync. Signed-off-by:
Jiandi An <jiandi.an@amd.com> Tested-by:
-
Noralf Trønnes authored
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Acked-by:
Shawn Guo <shawnguo@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-20-noralf@tronnes.org
-
Noralf Trønnes authored
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. drm_fbdev_generic_setup() handles mode_config.num_connector being zero. In that case it retries fbdev setup on the next .output_poll_changed. Cc: Eric Anholt <eric@anholt.net> Signed-off-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-19-noralf@tronnes.org
-
Noralf Trønnes authored
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-18-noralf@tronnes.org
-
Noralf Trønnes authored
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). If drm_fbdev_generic_setup() fails, an error is printed by the function. drm_fbdev_generic_setup() handles mode_config.num_connector being zero. In that case it retries fbdev setup on the next .output_poll_changed. Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-14-noralf@tronnes.org
-
Noralf Trønnes authored
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. Cc: Eric Anholt <eric@anholt.net> Signed-off-by:
-
Noralf Trønnes authored
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. CONFIG_DRM_FBDEV_EMULATION wasn't honoured by the CMA helper, but it is by drm_fb_helper. Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
