- 16 Oct, 2018 25 commits
-
-
Leon Romanovsky authored
The ucma users supply timeout in u32 format, it means that any number with most significant bit set will be converted to negative value by various rdma_*, cma_* and sa_query functions, which treat timeout as int. In the lowest level, the timeout is converted back to be unsigned long. Remove this ambiguous conversion by updating all function signatures to receive unsigned long. Reported-by:
Noa Osherovich <noaos@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Leon Romanovsky authored
This patch changes the small number of functions to be aligned to kernel coding style. It is needed to minimize the diffstat of the following patch. It doesn't change any functionality. Signed-off-by:
-
Leon Romanovsky authored
cma_resolve_iw_route() doesn't use timeout_ms parameter, so let's remove it. Signed-off-by:
-
Artemy Kovalyov authored
Schedule MR cache work only after bucket was initialized. Cc: <stable@vger.kernel.org> # 4.10 Fixes: 49780d42 ("IB/mlx5: Expose MR cache for mlx5_ib") Signed-off-by:
Artemy Kovalyov <artemyko@mellanox.com> Reviewed-by:
Majd Dibbiny <majd@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Leon Romanovsky authored
Add missing check for failure of cm_init_av_by_path Fixes: e1444b5a ("IB/cm: Fix automatic path migration support") Reported-by:
Slava Shwartsman <slavash@mellanox.com> Reviewed-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
-
Denis Drozdov authored
IPCB should be cleared before icmp_send, since it may contain data from previous layers and the data could be misinterpreted as ip header options, which later caused the ihl to be set to an invalid value and resulted in the following stack corruption: [ 1083.031512] ib0: packet len 57824 (> 2048) too long to send, dropping [ 1083.031843] ib0: packet len 37904 (> 2048) too long to send, dropping [ 1083.032004] ib0: packet len 4040 (> 2048) too long to send, dropping [ 1083.032253] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.032481] ib0: packet len 23960 (> 2048) too long to send, dropping [ 1083.033149] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.033439] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.033700] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.034124] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.034387] ================================================================== [ 1083.034602] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xf08/0x1310 [ 1083.034798] Write of size 4 at addr ffff880353457c5f by task kworker/u16:0/7 [ 1083.034990] [ 1083.035104] CPU: 7 PID: 7 Comm: kworker/u16:0 Tainted: G O 4.19.0-rc5+ #1 [ 1083.035316] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [ 1083.035573] Workqueue: ipoib_wq ipoib_cm_skb_reap [ib_ipoib] [ 1083.035750] Call Trace: [ 1083.035888] dump_stack+0x9a/0xeb [ 1083.036031] print_address_description+0xe3/0x2e0 [ 1083.036213] kasan_report+0x18a/0x2e0 [ 1083.036356] ? __ip_options_echo+0xf08/0x1310 [ 1083.036522] __ip_options_echo+0xf08/0x1310 [ 1083.036688] icmp_send+0x7b9/0x1cd0 [ 1083.036843] ? icmp_route_lookup.constprop.9+0x1070/0x1070 [ 1083.037018] ? netif_schedule_queue+0x5/0x200 [ 1083.037180] ? debug_show_all_locks+0x310/0x310 [ 1083.037341] ? rcu_dynticks_curr_cpu_in_eqs+0x85/0x120 [ 1083.037519] ? debug_locks_off+0x11/0x80 [ 1083.037673] ? debug_check_no_obj_freed+0x207/0x4c6 [ 1083.037841] ? check_flags.part.27+0x450/0x450 [ 1083.037995] ? debug_check_no_obj_freed+0xc3/0x4c6 [ 1083.038169] ? debug_locks_off+0x11/0x80 [ 1083.038318] ? skb_dequeue+0x10e/0x1a0 [ 1083.038476] ? ipoib_cm_skb_reap+0x2b5/0x650 [ib_ipoib] [ 1083.038642] ? netif_schedule_queue+0xa8/0x200 [ 1083.038820] ? ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib] [ 1083.038996] ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib] [ 1083.039174] process_one_work+0x912/0x1830 [ 1083.039336] ? wq_pool_ids_show+0x310/0x310 [ 1083.039491] ? lock_acquire+0x145/0x3a0 [ 1083.042312] worker_thread+0x87/0xbb0 [ 1083.045099] ? process_one_work+0x1830/0x1830 [ 1083.047865] kthread+0x322/0x3e0 [ 1083.050624] ? kthread_create_worker_on_cpu+0xc0/0xc0 [ 1083.053354] ret_from_fork+0x3a/0x50 For instance __ip_options_echo is failing to proceed with invalid srr and optlen passed from another layer via IPCB [ 762.139568] IPv4: __ip_options_echo rr=0 ts=0 srr=43 cipso=0 [ 762.139720] IPv4: ip_options_build: IPCB 00000000f3cd969e opt 000000002ccb3533 [ 762.139838] IPv4: __ip_options_echo in srr: optlen 197 soffset 84 [ 762.139852] IPv4: ip_options_build srr=0 is_frag=0 rr_needaddr=0 ts_needaddr=0 ts_needtime=0 rr=0 ts=0 [ 762.140269] ================================================================== [ 762.140713] IPv4: __ip_options_echo rr=0 ts=0 srr=0 cipso=0 [ 762.141078] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x12ec/0x1680 [ 762.141087] Write of size 4 at addr ffff880353457c7f by task kworker/u16:0/7 Signed-off-by:
Denis Drozdov <denisd@mellanox.com> Reviewed-by:
Erez Shitrit <erezsh@mellanox.com> Reviewed-by:
Feras Daoud <ferasda@mellanox.com> Signed-off-by:
-
Leon Romanovsky authored
Nullify the resource task struct pointer to ensure that subsequent calls won't try to release task_struct again. ------------[ cut here ]------------ ODEBUG: free active (active state 1) object type: rcu_head hint: (null) WARNING: CPU: 0 PID: 6048 at lib/debugobjects.c:329 debug_print_object+0x16a/0x210 lib/debugobjects.c:326 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 6048 Comm: syz-executor022 Not tainted 4.19.0-rc7-next-20181008+ #89 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x244/0x3ab lib/dump_stack.c:113 panic+0x238/0x4e7 kernel/panic.c:184 __warn.cold.8+0x163/0x1ba kernel/panic.c:536 report_bug+0x254/0x2d0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271 do_invalid_op+0x36/0x40 arch/x86/kernel/traps.c:290 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:969 RIP: 0010:debug_print_object+0x16a/0x210 lib/debugobjects.c:326 Code: 41 88 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 92 00 00 00 48 8b 14 dd 60 02 41 88 4c 89 fe 48 c7 c7 00 f8 40 88 e8 36 2f b4 fd <0f> 0b 83 05 a9 f4 5e 06 01 48 83 c4 18 5b 41 5c 41 5d 41 5e 41 5f RSP: 0018:ffff8801d8c3eda8 EFLAGS: 00010086 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8164d235 RDI: 0000000000000005 RBP: ffff8801d8c3ede8 R08: ffff8801d70aa280 R09: ffffed003b5c3eda R10: ffffed003b5c3eda R11: ffff8801dae1f6d7 R12: 0000000000000001 R13: ffffffff8939a760 R14: 0000000000000000 R15: ffffffff8840fca0 __debug_check_no_obj_freed lib/debugobjects.c:786 [inline] debug_check_no_obj_freed+0x3ae/0x58d lib/debugobjects.c:818 kmem_cache_free+0x202/0x290 mm/slab.c:3759 free_task_struct kernel/fork.c:163 [inline] free_task+0x16e/0x1f0 kernel/fork.c:457 __put_task_struct+0x2e6/0x620 kernel/fork.c:730 put_task_struct include/linux/sched/task.h:96 [inline] finish_task_switch+0x66c/0x900 kernel/sched/core.c:2715 context_switch kernel/sched/core.c:2834 [inline] __schedule+0x8d7/0x21d0 kernel/sched/core.c:3480 schedule+0xfe/0x460 kernel/sched/core.c:3524 freezable_schedule include/linux/freezer.h:172 [inline] futex_wait_queue_me+0x3f9/0x840 kernel/futex.c:2530 futex_wait+0x45c/0xa50 kernel/futex.c:2645 do_futex+0x31a/0x26d0 kernel/futex.c:3528 __do_sys_futex kernel/futex.c:3589 [inline] __se_sys_futex kernel/futex.c:3557 [inline] __x64_sys_futex+0x472/0x6a0 kernel/futex.c:3557 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x446549 Code: e8 2c b3 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 09 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f3a998f5da8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: ffffffffffffffda RBX: 00000000006dbc38 RCX: 0000000000446549 RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00000000006dbc38 RBP: 00000000006dbc30 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dbc3c R13: 2f646e6162696e69 R14: 666e692f7665642f R15: 00000000006dbd2c Kernel Offset: disabled Reported-by: syzbot+71aff6ea121ffefc280f@syzkaller.appspotmail.com Fixes: ed7a01fd ("RDMA/restrack: Release task struct which was hold by CM_ID object") Signed-off-by:
-
Mark Bloch authored
A user can provide a hint which will be attached to the packet and written to the CQE on receive. This can be used as a way to offload operations into the HW, for example parsing a packet which is a tunneled packet, and if so, pass 0x1 as the hint. The software can use that hint to decapsulate the packet and parse only the inner headers thus saving CPU cycles. Signed-off-by:
Mark Bloch <markb@mellanox.com> Reviewed-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
-
Gal Pressman authored
Remove double error check from create user RQ error flow. Fixes: 79b20a6c ("IB/mlx5: Add receive Work Queue verbs") Signed-off-by:
Gal Pressman <pressmangal@gmail.com> Reviewed-by:
-
Yishai Hadas authored
Verify that the input DEVX object type matches the created object. As the obj_id in the firmware is not globally unique the object type must be considered upon checking for a valid object id. Once both the type and the id match we know that the lock was taken on the correct object by the uverbs layer. Fixes: e662e14d ("IB/mlx5: Add DEVX support for modify and query commands") Signed-off-by:
-
Yixian Liu authored
This patch adds fast register physical memory region (FRMR) support for hip08. Signed-off-by:
Yixian Liu <liuyixian@huawei.com> Signed-off-by:
-
Selvin Xavier authored
In case the NQ alloc/enable fails, free up the already allocated/enabled NQ before reporting failure. Also, track the alloc/enable using proper state checking. Signed-off-by:
Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by:
-
Selvin Xavier authored
Delayed work bnxt_re_worker would be still running even after cancel_delayed_work returns. This causes crash as the driver proceeds with device removal. To make sure that the work is finished before returning, use cancel_delayed_work_sync. Signed-off-by:
-
Devesh Sharma authored
Some FW versios return pkey values more than 0xFFFF. pkey_tbl_len of ib_port_attr is 16bit value. So restricting max_pkeys to 0xFFFF. Signed-off-by:
Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by:
-
Devesh Sharma authored
Reports affiliated async event on the qp-async event channel instead of global event channel. Signed-off-by:
-
Selvin Xavier authored
Expose out of sequence errors received from FW. This counter is a 32 bit counter and driver has to accumulate the counter. Stores the previous value for calculating the difference in the next query. Also, update the HW statistics structure with new fields. Signed-off-by:
-
Selvin Xavier authored
Expose the RoCE discard and drop counters from the HW statistics context Signed-off-by:
-
Somnath Kotur authored
crsqe->resp would be NULL in case the host command timed out before getting a response from HW. Check for NULL pointer to avoid a potential crash while printing the error message. Signed-off-by:
Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
-
Devesh Sharma authored
In some FW versions, RoCE driver also receives an async notification which was directed to L2 driver. RoCE driver does not handle this and print a message to syslog. Drop these notifications silently. Signed-off-by:
-
Selvin Xavier authored
In the failure path, nq->bar_reg_iomem gets accessed without initializing. Avoid this by calling the bnxt_qplib_nq_stop_irq only if the initialization is complete. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b103 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by:
-
Selvin Xavier authored
This is reported by smatch check. rcfw->creq_bar_reg_iomem is accessed in bnxt_qplib_rcfw_stop_irq and this variable check afterwards doesn't make sense. Also, rcfw->creq_bar_reg_iomem will never be NULL. So Removing this check. Reported-by:
-
Selvin Xavier authored
Version macro is not required as the driver is not maintaining the version. Removing the references of this macro too. Signed-off-by:
-
Selvin Xavier authored
Fix possible recursive lock warning. Its a false warning as the locks are part of two differnt HW Queue data structure - cmdq and creq. Debug kernel is throwing the following warning and stack trace. [ 783.914967] ============================================ [ 783.914970] WARNING: possible recursive locking detected [ 783.914973] 4.19.0-rc2+ #33 Not tainted [ 783.914976] -------------------------------------------- [ 783.914979] swapper/2/0 is trying to acquire lock: [ 783.914982] 000000002aa3949d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.914999] but task is already holding lock: [ 783.915002] 00000000be73920d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x2a/0x350 [bnxt_re] [ 783.915013] other info that might help us debug this: [ 783.915016] Possible unsafe locking scenario: [ 783.915019] CPU0 [ 783.915021] ---- [ 783.915034] lock(&(&hwq->lock)->rlock); [ 783.915035] lock(&(&hwq->lock)->rlock); [ 783.915037] *** DEADLOCK *** [ 783.915038] May be due to missing lock nesting notation [ 783.915039] 1 lock held by swapper/2/0: [ 783.915040] #0: 00000000be73920d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x2a/0x350 [bnxt_re] [ 783.915044] stack backtrace: [ 783.915046] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.0-rc2+ #33 [ 783.915047] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.0.4 08/28/2014 [ 783.915048] Call Trace: [ 783.915049] <IRQ> [ 783.915054] dump_stack+0x90/0xe3 [ 783.915058] __lock_acquire+0x106c/0x1080 [ 783.915061] ? sched_clock+0x5/0x10 [ 783.915063] lock_acquire+0xbd/0x1a0 [ 783.915065] ? bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.915069] _raw_spin_lock_irqsave+0x4a/0x90 [ 783.915071] ? bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.915073] bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.915078] tasklet_action_common.isra.17+0x197/0x1b0 [ 783.915081] __do_softirq+0xcb/0x3a6 [ 783.915084] irq_exit+0xe9/0x100 [ 783.915085] do_IRQ+0x6a/0x120 [ 783.915087] common_interrupt+0xf/0xf [ 783.915088] </IRQ> Use nested notation for the spin_lock to avoid this warning. Signed-off-by: -
Selvin Xavier authored
Add the missing initalization of the cq_lock and qplib.flush_lock. Fixes: 942c9b6c ("RDMA/bnxt_re: Avoid Hard lockup during error CQE processing") Signed-off-by:
-
Jason Gunthorpe authored
From git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git This is required to resolve dependencies of the next series of RDMA patches. The code motion conflicts in drivers/infiniband/core/cache.c were resolved. Signed-off-by:
-
- 10 Oct, 2018 1 commit
-
-
Valentine Fatiev authored
The function that puts back the MR in cache also removes the DMA address from the HCA. Therefore we need to call this function before we remove the DMA mapping from MMU. Otherwise the HCA may access a memory that is no longer DMA mapped. Call trace: NMI: IOCK error (debug interrupt?) for reason 71 on CPU 0. CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.0-rc6+ #4 Hardware name: HP ProLiant DL360p Gen8, BIOS P71 08/20/2012 RIP: 0010:intel_idle+0x73/0x120 Code: 80 5c 01 00 0f ae 38 0f ae f0 31 d2 65 48 8b 04 25 80 5c 01 00 48 89 d1 0f 60 02 RSP: 0018:ffffffff9a403e38 EFLAGS: 00000046 RAX: 0000000000000030 RBX: 0000000000000005 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffff9a5790c0 RDI: 0000000000000000 RBP: 0000000000000030 R08: 0000000000000000 R09: 0000000000007cf9 R10: 000000000000030a R11: 0000000000000018 R12: 0000000000000000 R13: ffffffff9a5792b8 R14: ffffffff9a5790c0 R15: 0000002b48471e4d FS: 0000000000000000(0000) GS:ffff9c6caf400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f5737185000 CR3: 0000000590c0a002 CR4: 00000000000606f0 Call Trace: cpuidle_enter_state+0x7e/0x2e0 do_idle+0x1ed/0x290 cpu_startup_entry+0x6f/0x80 start_kernel+0x524/0x544 ? set_init_arg+0x55/0x55 secondary_startup_64+0xa4/0xb0 DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Read] Request device [04:00.0] fault addr b34d2000 [fault reason 06] PTE Read access is not set DMAR: [DMA Read] Request device [01:00.2] fault addr bff8b000 [fault reason 06] PTE Read access is not set Fixes: f3f134f5 ("RDMA/mlx5: Fix crash while accessing garbage pointer and freed memory") Signed-off-by:
Valentine Fatiev <valentinef@mellanox.com> Reviewed-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
-
- 05 Oct, 2018 3 commits
-
-
Leon Romanovsky authored
Tracking CM_ID resource is performed in two stages: creation of cm_id and connecting it to the cma_dev. It is needed because rdma-cm protocol exports two separate user-visible calls rdma_create_id and rdma_accept. At the time of CM_ID creation, the real owner of that object is unknown yet and we need to grab task_struct. This task_struct is released or reassigned in attach phase later on. but call to rdma_destroy_id left this task_struct unreleased. Such separation is unique to CM_ID and other restrack objects initialize in one shot. It means that it is safe to use "res->valid" check to catch unfinished CM_ID flow and release task_struct for that object. Fixes: 00313983 ("RDMA/nldev: provide detailed CM_ID information") Reported-by:
Yossi Itigin <yosefe@mellanox.com> Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Leon Romanovsky authored
Unify task update and kernel name set in one place. Reviewed-by:
-
Leon Romanovsky authored
Prepare rdma_restrack_set_task() call to accommodate more code by moving its implementation from *.h to *.c. Reviewed-by:
-
- 04 Oct, 2018 1 commit
-
-
Parav Pandit authored
rdma_find_ndev_for_src_ip_rcu() returns either valid netdev pointer or ERR_PTR(). Instead of checking for NULL, check for error. Fixes: caf1e3ae ("RDMA/core Introduce and use rdma_find_ndev_for_src_ip_rcu") Reported-by: syzbot+20c32fa6ff84a2d28c36@syzkaller.appspotmail.com Signed-off-by:
-
- 03 Oct, 2018 10 commits
-
-
Venkata Sandeep Dhanalakota authored
This patch moves ruc_loopback() from hfi1 into rdmavt for code sharing with the qib driver. Reviewed-by:
Brian Welty <brian.welty@intel.com> Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Signed-off-by:
Harish Chegondi <harish.chegondi@intel.com> Signed-off-by:
-
Venkata Sandeep Dhanalakota authored
Moving send completion code into rdmavt in order to have shared logic between qib and hfi1 drivers. Reviewed-by:
-
Brian Welty authored
This patch moves hfi1_copy_sge() into rdmavt for sharing with qib. This patch also moves all the wss_*() functions into rdmavt as several wss_*() functions are called from hfi1_copy_sge() When SGE copy mode is adaptive, cacheless copy may be done in some cases for performance reasons. In those cases, X86 cacheless copy function is called since the drivers that use rdmavt and may set SGE copy mode to adaptive are X86 only. For this reason, this patch adds "depends on X86_64" to rdmavt/Kconfig. Reviewed-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by:
-
Nathan Chancellor authored
Clang warns when one enumerated type is implicitly converted to another. drivers/infiniband/hw/mlx4/mad.c:1811:41: warning: implicit conversion from enumeration type 'enum mlx4_ib_qp_flags' to different enumeration type 'enum ib_qp_create_flags' [-Wenum-conversion] qp_init_attr.init_attr.create_flags = MLX4_IB_SRIOV_TUNNEL_QP; ~ ^~~~~~~~~~~~~~~~~~~~~~~ drivers/infiniband/hw/mlx4/mad.c:1819:41: warning: implicit conversion from enumeration type 'enum mlx4_ib_qp_flags' to different enumeration type 'enum ib_qp_create_flags' [-Wenum-conversion] qp_init_attr.init_attr.create_flags = MLX4_IB_SRIOV_SQP; ~ ^~~~~~~~~~~~~~~~~ The type mlx4_ib_qp_flags explicitly provides supplemental values to the type ib_qp_create_flags. Make that clear to Clang by changing the create_flags type to u32. Reported-by:Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Lijun Ou authored
The atomic operation not supported inline. Besides, the standard atomic operation only support a sge and the sge is placed in the wqe. Fix: 384f8818("RDMA/hns: Add atomic support") Signed-off-by:
Lijun Ou <oulijun@huawei.com> Signed-off-by:
-
Lijun Ou authored
In order to extend vlan device range, the design add two field of qp context for checking vlan packet in sender and in recevicer. Signed-off-by:
-
Lijun Ou authored
This patch adds local invalidate Memory Region (MR) support in the kernel space driver. Signed-off-by:
Yangyang Li <liyangyang20@huawei.com> Signed-off-by:
-
Lijun Ou authored
The hip08 hardware has two version. the version id are 0x20 and 0x21 according to the pci revision. It needs to adjust some fields for extending new features. The specific updates include: 1. Add some fields for supporting new features by enabling some reserved fields in 0x20 version. 2. remove some fields which the user is not visiable in order to support the extend features. 3. Init some fields with zero. These updates is compatible with 0x20 version. Signed-off-by:
-
Lijun Ou authored
According to hip08 limit, the buffer size of extend sge needs to be an integer wqe_sge_buf_page size. For example, the value of sge_shift field of qp context is greater or equal to eight when buffer page size is 4K size. The value of sge_shift field of qp context assigned by hr_qp->sge.sge_cnt. Signed-off-by:
-
Lijun Ou authored
According to the IB protocol definition, the driver needs to show the correct device information and the information will be queryed by device attribute. Signed-off-by:
-
