Make the BPF_SK_LOOKUP macro take a helper function, to ease
writing tests for new helpers.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Pull definitions for bpf_skc_lookup_tcp and bpf_sk_check_syncookie.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Using bpf_skc_lookup_tcp it's possible to ascertain whether a packet
belongs to a known connection. However, there is one corner case: no
sockets are created if SYN cookies are active. This means that the final
ACK in the 3WHS is misclassified.

Using the helper, we can look up the listening socket via
bpf_skc_lookup_tcp and then check whether a packet is a valid SYN
cookie ACK.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Allow looking up a sock_common. This gives eBPF programs
access to timewait and request sockets.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

It's currently not possible to access timewait or request sockets
from eBPF, since there is no way to return a PTR_TO_SOCK_COMMON
from a helper. Introduce RET_PTR_TO_SOCK_COMMON to enable this
behaviour.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

So far, the verifier only acquires reference tracking state for
RET_PTR_TO_SOCKET_OR_NULL. Instead of extending this for every
new return type which desires these semantics, acquire reference
tracking state iff the called helper is an acquire function.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

eBPF "restricted C" code can be compiled with LLVM/clang using target
triplets like armv7l-unknown-linux-gnueabihf and loaded/run with small
cross-compiled gobpf/elf [1] programs without requiring a full BCC
port which is also undesirable on small embedded systems due to its
size footprint. The only missing pieces are these helper macros which
otherwise have to be redefined by each eBPF arm program.

[1] https://github.com/iovisor/gobpf/tree/master/elfSigned-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Fix sparse warnings:

drivers/isdn/i4l/isdn_ppp.c:1891:16: warning:
 symbol 'isdn_ppp_mp_discard' was not declared. Should it be static?
drivers/isdn/i4l/isdn_ppp.c:1903:6: warning:
 symbol 'isdn_ppp_mp_reassembly' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix sparse warning:

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c:414:6:
 warning: symbol 'hclge_destroy_cmd_queue' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Paolo Abeni says:

====================
net: refactor ndo_select_queue()

Currently, on most devices implementing ndo_select_queue(), we get 2
indirect calls per xmit packet, at least in some scenarios.

We can avoid one of such indirect calls refactoring the ndo_select_queue()
usage so that we don't need anymore the 'fallback' argument.

The first patch renames a helper used later as a public API, the second one
changes the af packet implementation so that it uses the common infrastructure
to select the xmit queue, and the second patch drops the now unneeded argument
from ndo_select_queue().

Alternatively we could use the INDIRECT_CALL_WRAPPER infrastructure to avoid
the fallback indirect call in the common case, but this solution allows also
for some code cleanup.

 v1 -> v2:
  - renamed select queue helpers, as per Eric's and David's suggestions
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

After the previous patch, all the callers of ndo_select_queue()
provide as a 'fallback' argument netdev_pick_tx.
The only exceptions are nested calls to ndo_select_queue(),
which pass down the 'fallback' available in the current scope
- still netdev_pick_tx.

We can drop such argument and replace fallback() invocation with
netdev_pick_tx(). This avoids an indirect call per xmit packet
in some scenarios (TCP syn, UDP unconnected, XDP generic, pktgen)
with device drivers implementing such ndo. It also clean the code
a bit.

Tested with ixgbe and CONFIG_FCOE=m

With pktgen using queue xmit:
threads		vanilla 	patched
		(kpps)		(kpps)
1		2334		2428
2		4166		4278
4		7895		8100

 v1 -> v2:
 - rebased after helper's name change
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently packet_pick_tx_queue() is the only caller of
ndo_select_queue() using a fallback argument other than
netdev_pick_tx.

Leveraging rx queue, we can obtain a similar queue selection
behavior using core helpers. After this change, ndo_select_queue()
is always invoked with netdev_pick_tx() as fallback.
We can change ndo_select_queue() signature in a followup patch,
dropping an indirect call per transmitted packet in some scenarios
(e.g. TCP syn and XDP generic xmit)

This changes slightly how af packet queue selection happens when
PACKET_QDISC_BYPASS is set. It's now more similar to plan dev_queue_xmit()
tacking in account both XPS and TC mapping.

 v1  -> v2:
  - rebased after helper name change
 RFC -> v1:
  - initialize sender_cpu to the expected value
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With the following patches, we are going to use __netdev_pick_tx() in
many modules. Rename it to netdev_pick_tx(), to make it clear is
a public API.

Also rename the existing netdev_pick_tx() to netdev_core_pick_tx(),
to avoid name clashes.
Suggested-by: Eric Dumazet <edumazet@google.com>
Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sudarsana Reddy Kalluru says:

====================
qed* enhancements.

The patch series adds couple of enhancements for qed/qede drivers.
Please consider applying it to 'net-next' tree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The patch introduces a new Multi-Function bit for cases where firmware
shouldn't perform the insertion of vlan-0 tag. The new bit is defined to
abstract the implementation from the actual MF mode.
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The patch adds support to display MBI image version in 'ethtool -i' output.
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Similiar to commit a6111d3c ("vlan: Pass SIOC[SG]HWTSTAMP ioctls to
real device") and commit 37dd9255 ("vlan: Pass ethtool get_ts_info
queries to real device."), add MACVlan HW ptp support.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to use eth_broadcast_addr() to assign broadcast address
insetad of memset().
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Added support for AES128-CCM based record encryption. AES128-CCM is
similar to AES128-GCM. Both of them have same salt/iv/mac size. The
notable difference between the two is that while invoking AES128-CCM
operation, the salt||nonce (which is passed as IV) has to be prefixed
with a hardcoded value '2'. Further, CCM implementation in kernel
requires IV passed in crypto_aead_request() to be full '16' bytes.
Therefore, the record structure 'struct tls_rec' has been modified to
reserve '16' bytes for IV. This works for both GCM and CCM based cipher.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Heiner Kallweit says:

====================
net: phy: aquantia: add interface mode handling

These two patches add interface mode handling for the AQR107/AQCS109.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Depending on the auto-negotiated speed the PHY may change the interface
mode. Check for new mode and set phydev->interface accordingly.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
[hkallweit1@gmail.com: picked from bigger patch and reworked]
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Let config_init check for unsupported interface modes on AQR107/AQCS109.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
[hkallweit1@gmail.com: adjusted for AQR107/AQCS109 specifics]
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the Phy driver's link_change_notify callback is called
whenever the state machine is run (every second if polling), no matter
whether the state changed or not. This isn't needed and may confuse
users considering the name of the callback. Actually it contradicts
its kernel-doc description. Therefore let's change the behavior and
call this callback only in case of an actual state change.

This requires changes to the at803x and rockchip drivers.
at803x can be simplified so that it reacts on a state change to
PHY_NOLINK only.
The rockchip driver can also be much simplified. We simply re-init
the AFE/DSP registers whenever we change to PHY_RUNNING and speed
is 100Mbps. This causes very small overhead because we do this even
if the speed was 100Mbps already. But this is negligible and
I think justified by the much simpler code.

Changes are compile-tested only.

A little bit problematic seems to be to find somebody with the
hardware to test the changes to the two PHY drivers. See also [0].
David may be able to test the Rockchip driver.

[0] https://marc.info/?t=153782508800006&r=1&w=2Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
100GbE Intel Wired LAN Driver Updates 2019-03-19

This series contains updates to ice driver only.

Michal adds support for the pruning enable flag to avoid seeing
broadcast packets on different VLANs.

Akeem fixes an issue with VF queues being disabled and the VF netdev
network carrier being lost after reset. Fixed an issue issue when doing
PFR and CORER resets, where all VF VSIs need to be reset and rebuilt
with the main VSIs before replaying all VSIs.  Resolved an issue to
properly initialize VFs in the guest OS via PCI passthrough.

Bruce adds a local variable to avoid unnecessary de-references
throughout ice_probe().

Brett cleans up the code a bit by removing the need for a local variable
and re-designs the loop to simply return when get a successful result.
Cleans up the code to replace loop calls with a predefined macro to make
the code more consistent.  Updated the driver to ensure ITR granularity
is always 2 usecs. Refactors the calculation of VSIs per PF into a
general function that can calculate per PF allocations for not just VSIs
but across multiple resource types.  Improve the driver performance of
the driver when using the default settings by determining the ring size
and the number of descriptors for transmit and receive based on a
calculation with the PAGE_SIZE, ICE_MAX_NUM_DESC, and
ICE_REQ_DESC_MULTIPLE.

Chinh fixes an issue, where a reserved bit was possibly being set when
it should never be set.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
1GbE Intel Wired LAN Driver Updates 2019-03-19

This series contains updates to e100, e1000, e1000e, igb, igc and
ixgbe.

Serhey Popovych fixes the return value for several of our older
drivers for netdev_update_features() to notify of changes applied.

Kai-Heng Feng fixes the WoL setting for system suspend, which should
not set to runtime suspend settings for igb.  Then fixes a power
management issue with e1000e for CNP+ devices.

Colin Ian King fixes whitespace issue (indentation), which helps with
readability.

Sasha provides the remaining changes for igc, including the enabling of
multi-queues to receive.  Added support for displaying and configuring
network flow classification (NFC) via ethtool.  Added additional
statistics and basic counters for igc.  Fixed a typo, so it aligns with
our other drivers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently we set the default number of Tx and Rx descriptors to 128 by
default. For Rx this amounts to a full page (assuming 4K pages) because
each Rx descriptor is 32 Bytes, but for Tx it only amounts to a half
page because each Tx descriptor is 16 Bytes (assuming 4K pages).
Instead of assuming 4K pages, determine the ring size and the number of
descriptors for Tx and Rx based on a calculation using the PAGE_SIZE,
ICE_MAX_NUM_DESC, and ICE_REQ_DESC_MULTIPLE. This change is being made
to improve the performance of the driver when using the default
settings.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

During SR-IOV initialization, we allocate and setup VFs with reset, and
since we were going to inform Firmware about our intention to do VFLR by
disabling LAN TX Queue, then we really have to complete VF reset flow with
VFLR using appropriate registers - Otherwise, reset status bit for VF in
the Guest OS might returns DEADBEEF.
This resolves issue to properly initialize VFs in the Guest OS via PCI
passthrough.
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice_get_guar_num_vsi currently calculates the number of VSIs per PF.
Rework this into a general function ice_get_num_per_func, that can
calculate per PF allocations for not just VSIs but across multiple
resource types.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Reviewed-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

All VF VSIs need to be reset and rebuild with the main VSIs before
replaying all VSIs, so that all existing switch filters, scheduler tree
and other configuration could be replayed at once. This fixes issues when
doing PFR and CORER reset.
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Instead of hoping that our ITR granularity will be 2 usec program the
GLINT_CTL register to make sure the ITR granularity is always 2 usecs.

Now that we know what the ITR granularity will be get rid of the check
in ice_probe() to verify our previous assumption.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Replace all instances of:
	for (i = 0; i < pf->num_alloc_vsi; i++)

with the following macro:
	ice_for_each_vsi(pf, i)

This will allow the code to be consistent since there are currently
cases of using both.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

In the ice_aq_set_phy_cfg AQ command, the 16.4 bit is reserved. This
patch will make sure that this bit will never be set to 1.
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Reviewed-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

In ice_pf_rxq_wait we are using an unnecessary local variable and also
we are checking if the timeout time was reached after the loop. Get rid
of the local variable and return 0 right when we get a successful
result. This makes it so we can return -ETIMEDOUT if we ever exit the
loop because we know the timeout time has been hit.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Add a local variable struct device *dev to avoid unnecessary de-references
throughout ice_probe().
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch fixes issues with VF queues being disabled, and VF netdev
network carrier being lost after reset. Basically, we need to check if VF
is enabled, and queue configured in reset_all_vfs flow, and disable/enable
those queues appropriately whenever the function is called after
Global/CORER/PFR reset/rebuild/replay.
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Set egress (Rx) pruning enable flag for VF VSI in VSI ctxt to
enable prune action.

To avoid seeing broadcast packet in different VLAN, pruning enable
flag in VSI ctxt should be set.

Write new functions (fill VSI ctx) to not repeat send ctxt code.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Remove unneeded hw_dbg prints from igc_ethtool.c file.
Clean up code.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Add the underline for the _IGC_BASE_H_.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Copy the ntuple feature into list of user selectable features.
Enable the ntuple feature.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Add support for statistics and show basic counters.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>