- 19 Dec, 2017 27 commits
-
-
Moni Shoua authored
In error flow, when DESTROY_QP command should be executed, the wrong mailbox was set with data, not the one that is written to hardware, Fix that. Fixes: 09a7d9ec '{net,IB}/mlx5: QP/XRCD commands via mlx5 ifc' Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Eugenia Emantayev authored
Fix misspelling in word syndrome. Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Eugenia Emantayev authored
Fixes the bug when turning on/off CQE compression mechanism resets the RX rings size to default value when it is not needed. Fixes: 2fc4bfb7 ("net/mlx5e: Dynamic RQ type infrastructure") Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Gal Pressman authored
The assumption that the next header field contains the transport protocol is wrong for IPv6 packets with extension headers. Instead, we should look the inner-most next header field in the buffer. This will fix TSO offload for tunnels over IPv6 with extension headers. Performance testing: 19.25x improvement, cool! Measuring bandwidth of 16 threads TCP traffic over IPv6 GRE tap. CPU: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz NIC: Mellanox Technologies MT28800 Family [ConnectX-5 Ex] TSO: Enabled Before: 4,926.24 Mbps Now : 94,827.91 Mbps Fixes: b3f63c3d ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Huy Nguyen authored
Fix bug that allows ets bw sum to be 0% when ets tc type exists. Fixes: 08fb1dac ('net/mlx5e: Support DCBNL IEEE ETS') Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Eran Ben Elisha authored
In mlx5_ifc, struct size was not complete, and thus driver was sending garbage after the last defined field. Fixed it by adding reserved field to complete the struct size. In addition, rename all set_rate_limit to set_pp_rate_limit to be compliant with the Firmware <-> Driver definition. Fixes: 7486216b ("{net,IB}/mlx5: mlx5_ifc updates") Fixes: 1466cc5b ("net/mlx5: Rate limit tables support") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Saeed Mahameed authored
Before the offending commit, mlx5 core did the IRQ affinity itself, and it seems that the new generic code have some drawbacks and one of them is the lack for user ability to modify irq affinity after the initial affinity values got assigned. The issue is still being discussed and a solution in the new generic code is required, until then we need to revert this patch. This fixes the following issue: echo <new affinity> > /proc/irq/<x>/smp_affinity fails with -EIO This reverts commit a435393a. Note: kept mlx5_get_vector_affinity in include/linux/mlx5/driver.h since it is used in mlx5_ib driver. Fixes: a435393a ("mlx5: move affinity hints assignments to generic code") Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jes Sorensen <jsorensen@fb.com> Reported-by: Jes Sorensen <jsorensen@fb.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Kamal Heib authored
Currently, if a size of zero is passed to mlx5_fpga_mem_{read|write}_i2c() the "err" return value will not be initialized, which triggers gcc warnings: [..]/mlx5/core/fpga/sdk.c:87 mlx5_fpga_mem_read_i2c() error: uninitialized symbol 'err'. [..]/mlx5/core/fpga/sdk.c:115 mlx5_fpga_mem_write_i2c() error: uninitialized symbol 'err'. fix that. Fixes: a9956d35 ('net/mlx5: FPGA, Add SBU infrastructure') Signed-off-by: Kamal Heib <kamalh@mellanox.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Phil Sutter authored
The recently added fib_metrics_match() causes a regression for routes with both RTAX_FEATURES and RTAX_CC_ALGO if the latter has TCP_CONG_NEEDS_ECN flag set: | # ip link add d0 type dummy | # ip link set d0 up | # ip route add 172.29.29.0/24 dev d0 features ecn congctl dctcp | # ip route del 172.29.29.0/24 dev d0 features ecn congctl dctcp | RTNETLINK answers: No such process During route insertion, fib_convert_metrics() detects that the given CC algo requires ECN and hence sets DST_FEATURE_ECN_CA bit in RTAX_FEATURES. During route deletion though, fib_metrics_match() compares stored RTAX_FEATURES value with that from userspace (which obviously has no knowledge about DST_FEATURE_ECN_CA) and fails. Fixes: 5f9ae3d9 ("ipv4: do metrics match when looking up and deleting a route") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fredrik Hallenberg authored
As noted in dwmac4_wrback_get_rx_timestamp_status the timestamp is found in the context descriptor following the current descriptor. However the current code looks for the context descriptor in the current descriptor, which will always fail. Signed-off-by: Fredrik Hallenberg <megahallon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fredrik Hallenberg authored
When using GMAC4 the value written in PTP_SSIR should be shifted however the shifted value is also used in subsequent calculations which results in a bad timestamp value. Signed-off-by: Fredrik Hallenberg <megahallon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
When, during a join operation, or during message transmission, a group member needs to be added to the group's 'congested' list, we sort it into the list in ascending order, according to its current advertised window size. However, we miss the case when the member is already on that list. This will have the result that the member, after the window size has been decremented, might be at the wrong position in that list. This again may have the effect that we during broadcast and multicast transmissions miss the fact that a destination is not yet ready for reception, and we end up sending anyway. From this point on, the behavior during the remaining session is unpredictable, e.g., with underflowing window sizes. We now correct this bug by unconditionally removing the member from the list before (re-)sorting it in. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
Now it's using IPV6_MIN_MTU as the min mtu in ip6_tnl_xmit, but IPV6_MIN_MTU actually only works when the inner packet is ipv6. With IPV6_MIN_MTU for ipv4 packets, the new pmtu for inner dst couldn't be set less than 1280. It would cause tx_err and the packet to be dropped when the outer dst pmtu is close to 1280. Jianlin found it by running ipv4 traffic with the topo: (client) gre6 <---> eth1 (route) eth2 <---> gre6 (server) After changing eth2 mtu to 1300, the performance became very low, or the connection was even broken. The issue also affects ip4ip6 and ip6ip6 tunnels. So if the inner packet is ipv4, 576 should be considered as the min mtu. Note that for ip4ip6 and ip6ip6 tunnels, the inner packet can only be ipv4 or ipv6, but for gre6 tunnel, it may also be ARP. This patch using 576 as the min mtu for non-ipv6 packet works for all those cases. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
The same fix as the patch "ip_gre: remove the incorrect mtu limit for ipgre tap" is also needed for ip6_gre. Fixes: 61e84623 ("net: centralize net_device min/max MTU checking") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
ipgre tap driver calls ether_setup(), after commit 61e84623 ("net: centralize net_device min/max MTU checking"), the range of mtu is [min_mtu, max_mtu], which is [68, 1500] by default. It causes the dev mtu of the ipgre tap device to not be greater than 1500, this limit value is not correct for ipgre tap device. Besides, it's .change_mtu already does the right check. So this patch is just to set max_mtu as 0, and leave the check to it's .change_mtu. Fixes: 61e84623 ("net: centralize net_device min/max MTU checking") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
Unlike ip tunnels, now vxlan doesn't do any pmtu update for upper dst pmtu, even if it doesn't match the lower dst pmtu any more. The problem can be reproduced when reducing the vxlan lower dev's pmtu when running netperf. In jianlin's testing, the performance went to 1/7 of the previous. This patch is to update the upper dst pmtu to match the lower dst pmtu on tx path so that packets can be sent out even when lower dev's pmtu has been changed. It also works for metadata dst. Note that this patch doesn't process any pmtu icmp packet. But even in the future, the support for pmtu icmp packets process of udp tunnels will also needs this. The same thing will be done for geneve in another patch. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Kochetkov authored
Under certain conditions EMAC stop reception of incoming packets and continuously increment R_MISS register instead of saving data into provided buffer. The commit implement workaround for such situation. Then the stall detected EMAC will be restarted. On device the stall looks like the device lost it's dynamic IP address. ifconfig shows that interface error counter rapidly increments. At the same time on the DHCP server we can see continues DHCP-requests from device. In real network stalls happen really rarely. To make them frequent the broadcast storm[1] should be simulated. For simulation it is necessary to make following connections: 1. connect radxarock to 1st port of switch 2. connect some PC to 2nd port of switch 3. connect two other free ports together using standard ethernet cable, in order to make a switching loop. After that, is necessary to make a broadcast storm. For example, running on PC 'ping' to some IP address triggers ARP-request storm. After some time (~10sec), EMAC on rk3188 will stall. Observed and tested on rk3188 radxarock. [1] https://en.wikipedia.org/wiki/Broadcast_radiationSigned-off-by: Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Kochetkov authored
arc_emac_rx() has some issues found by code review. In case netdev_alloc_skb_ip_align() or dma_map_single() failure rx fifo entry will not be returned to EMAC. In case dma_map_single() failure previously allocated skb became lost to driver. At the same time address of newly allocated skb will not be provided to EMAC. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sean Wang authored
The current solution would setup fixed and force link of 1Gbps to the both GMAC on the default. However, The GMAC should always be put to link down state when the GMAC is disabled on certain target boards. Otherwise, the driver possibly receives unexpected data from the floating hardware connection through the unused GMAC. Although the driver had been added certain protection in RX path to get rid of such kind of unexpected data sent to the upper stack. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
This reverts commit 63dd00fa. RAUHT DELETE_ALL seems to trigger a bug in FW. That manifests by later calls to RAUHT ADD of an IPv6 neighbor to fail with "bad parameter" error code. Signed-off-by: Petr Machata <petrm@mellanox.com> Fixes: 63dd00fa ("mlxsw: spectrum_router: Add batch neighbour deletion") Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Brian King authored
This fixes a hang issue seen when changing the MTU size from 1500 MTU to 9000 MTU on both 5717 and 5719 chips. In discussion with Broadcom, they've indicated that these chipsets have the same phy as the 57766 chipset, so the same workarounds apply. This has been tested by IBM on both Power 8 and Power 9 systems as well as by Broadcom on x86 hardware and has been confirmed to resolve the hang issue. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2017-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A few more fixes: * hwsim: - set To-DS bit in some frames missing it - fix sleeping in atomic * nl80211: - doc cleanup - fix locking in an error path * build: - don't append to created certs C files - ship certificate pre-hexdumped ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Johannes Berg authored
Not only does this remove the need for the hexdump code in most normal kernel builds (still there for the extra directory), but it also removes the need to ship binary files, which apparently is somewhat problematic, as Randy reported. While at it, also add the generated files to clean-files. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Jonathan Corbet authored
Commit ca986ad9 (nl80211: allow multiple active scheduled scan requests) removed WIPHY_FLAG_SUPPORTS_SCHED_SCAN but left the kerneldoc description in place, leading to this docs-build warning: ./include/net/cfg80211.h:3278: warning: Excess enum value 'WIPHY_FLAG_SUPPORTS_SCHED_SCAN' description in 'wiphy_flags' Remove the line and gain a bit of peace. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Jia-Ju Bai authored
The driver may sleep under a spinlock. The function call path is: hwsim_get_radio_nl (acquire the spinlock) nlmsg_new(GFP_KERNEL) --> may sleep To fix it, GFP_KERNEL is replaced with GFP_ATOMIC. This bug is found by my static analysis tool(DSAC) and checked by my code review. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Thierry Reding authored
Currently the certs C code generation appends to the generated files, which is most likely a leftover from commit 715a1233 ("wireless: don't write C files on failures"). This causes duplicate code in the generated files if the certificates have their timestamps modified between builds and thereby trigger the generation rules. Fixes: 715a1233 ("wireless: don't write C files on failures") Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Adiel Aloni authored
Same as in ieee80211_nullfunc_get, enable the TODS bit, otherwise the nullfunc packet will not be handled in ap rx path. (will be dropped in ieee80211_accept_frame()). Signed-off-by: Adiel Aloni <adiel.aloni@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
- 18 Dec, 2017 10 commits
-
-
Alexey Khoroshilov authored
There are several error paths in xgene_mdio_probe(), where clk is left undisabled. The patch fixes them. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Observed on the 88e1512 in SGMII-to-Copper mode, negotiating pause is unreliable. While the pause bits can be set in the advertisment register, they clear shortly after negotiation with a link partner commences irrespective of the cause of the negotiation. While these bits may be correctly conveyed to the link partner on the first negotiation, a subsequent negotiation (eg, due to negotiation restart by the link partner, or reconnection of the cable) will result in the link partner seeing these bits as zero, while the kernel believes that it has advertised pause modes. This leads to the local kernel evaluating (eg) symmetric pause mode, while the remote end evaluates that we have no pause mode capability. Since we can't guarantee the advertisment, disable pause mode support with this PHY when used in SGMII-to-Copper mode. The 88e1510 in RGMII-to-Copper mode appears to behave correctly. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
The early call to br_stp_change_bridge_id in bridge's newlink can cause a memory leak if an error occurs during the newlink because the fdb entries are not cleaned up if a different lladdr was specified, also another minor issue is that it generates fdb notifications with ifindex = 0. Another unrelated memory leak is the bridge sysfs entries which get added on NETDEV_REGISTER event, but are not cleaned up in the newlink error path. To remove this special case the call to br_stp_change_bridge_id is done after netdev register and we cleanup the bridge on changelink error via br_dev_delete to plug all leaks. This patch makes netlink bridge destruction on newlink error the same as dellink and ioctl del which is necessary since at that point we have a fully initialized bridge device. To reproduce the issue: $ ip l add br0 address 00:11:22:33:44:55 type bridge group_fwd_mask 1 RTNETLINK answers: Invalid argument $ rmmod bridge [ 1822.142525] ============================================================================= [ 1822.143640] BUG bridge_fdb_cache (Tainted: G O ): Objects remaining in bridge_fdb_cache on __kmem_cache_shutdown() [ 1822.144821] ----------------------------------------------------------------------------- [ 1822.145990] Disabling lock debugging due to kernel taint [ 1822.146732] INFO: Slab 0x0000000092a844b2 objects=32 used=2 fp=0x00000000fef011b0 flags=0x1ffff8000000100 [ 1822.147700] CPU: 2 PID: 13584 Comm: rmmod Tainted: G B O 4.15.0-rc2+ #87 [ 1822.148578] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 1822.150008] Call Trace: [ 1822.150510] dump_stack+0x78/0xa9 [ 1822.151156] slab_err+0xb1/0xd3 [ 1822.151834] ? __kmalloc+0x1bb/0x1ce [ 1822.152546] __kmem_cache_shutdown+0x151/0x28b [ 1822.153395] shutdown_cache+0x13/0x144 [ 1822.154126] kmem_cache_destroy+0x1c0/0x1fb [ 1822.154669] SyS_delete_module+0x194/0x244 [ 1822.155199] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 1822.155773] entry_SYSCALL_64_fastpath+0x23/0x9a [ 1822.156343] RIP: 0033:0x7f929bd38b17 [ 1822.156859] RSP: 002b:00007ffd160e9a98 EFLAGS: 00000202 ORIG_RAX: 00000000000000b0 [ 1822.157728] RAX: ffffffffffffffda RBX: 00005578316ba090 RCX: 00007f929bd38b17 [ 1822.158422] RDX: 00007f929bd9ec60 RSI: 0000000000000800 RDI: 00005578316ba0f0 [ 1822.159114] RBP: 0000000000000003 R08: 00007f929bff5f20 R09: 00007ffd160e8a11 [ 1822.159808] R10: 00007ffd160e9860 R11: 0000000000000202 R12: 00007ffd160e8a80 [ 1822.160513] R13: 0000000000000000 R14: 0000000000000000 R15: 00005578316ba090 [ 1822.161278] INFO: Object 0x000000007645de29 @offset=0 [ 1822.161666] INFO: Object 0x00000000d5df2ab5 @offset=128 Fixes: 30313a3d ("bridge: Handle IFLA_ADDRESS correctly when creating bridge device") Fixes: 5b8d5429 ("bridge: netlink: register netdevice before executing changelink") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
Whenever a new type of chunk is added, the corresp conversion in sctp_cname should be added. Otherwise, in some places, pr_debug will print it as "unknown chunk". Fixes: cc16f00f ("sctp: add support for generating stream reconf ssn reset request chunk") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo R. Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
Now when reneging events in sctp_ulpq_renege(), the variable freed could be increased by a __u16 value twice while freed is of __u16 type. It means freed may overflow at the second addition. This patch is to fix it by using __u32 type for 'freed', while at it, also to remove 'if (chunk)' check, as all renege commands are generated in sctp_eat_data and it can't be NULL. Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hemanth Puranik authored
This patch fixes the order of mac_up and sgmii_open for the reasons noted below: - If open takes more time(if the SGMII block is not responding or if we want to do some delay based task) in this situation we will hit NETDEV watchdog - The main reason : We should signal to upper layers that we are ready to receive packets "only" when the entire path is initialized not the other way around, this is followed in the reset path where we do mac_down, sgmii_reset and mac_up. This also makes the driver uniform across the reset and open paths. - In the future there may be need for delay based tasks to be done in sgmii open which will result in NETDEV watchdog - As per the documentation the order of init should be sgmii, mac, rings and DMA Signed-off-by: Hemanth Puranik <hpuranik@codeaurora.org> Acked-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Zhao Qiang authored
88E1145 also need this autoneg errata. Fixes: f2899788 ("net: phy: marvell: Limit errata to 88m1101") Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
A group member going into state LEAVING should never go back to any other state before it is finally deleted. However, this might happen if the socket needs to send out a RECLAIM message during this interval. Since we forget to remove the leaving member from the group's 'active' or 'pending' list, the member might be selected for reclaiming, change state to RECLAIMING, and get stuck in this state instead of being deleted. This might lead to suppression of the expected 'member down' event to the receiver. We fix this by removing the member from all lists, except the RB tree, at the moment it goes into state LEAVING. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
Group messages are not supposed to be returned to sender when the destination socket disappears. This is done correctly for regular traffic messages, by setting the 'dest_droppable' bit in the header. But we forget to do that in group protocol messages. This has the effect that such messages may sometimes bounce back to the sender, be perceived as a legitimate peer message, and wreak general havoc for the rest of the session. In particular, we have seen that a member in state LEAVING may go back to state RECLAIMED or REMITTED, hence causing suppression of an otherwise expected 'member down' event to the user. We fix this by setting the 'dest_droppable' bit even in group protocol messages. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2017-12-17 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a corner case in generic XDP where we have non-linear skbs but enough tailroom in the skb to not miss to linearizing there, from Song. 2) Fix BPF JIT bugs in s390x and ppc64 to not recache skb data when BPF context is not skb, from Daniel. 3) Fix a BPF JIT bug in sparc64 where recaching skb data after helper call would use the wrong register for the skb, from Daniel. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 17 Dec, 2017 2 commits
-
-
Alexey Kodanev authored
Stefano Brivio says: Commit a985343b ("vxlan: refactor verification and application of configuration") introduced a change in the behaviour of initial MTU setting: earlier, the MTU for a link created on top of a given lower device, without an initial MTU specification, was set to the MTU of the lower device minus headroom as a result of this path in vxlan_dev_configure(): if (!conf->mtu) dev->mtu = lowerdev->mtu - (use_ipv6 ? VXLAN6_HEADROOM : VXLAN_HEADROOM); which is now gone. Now, the initial MTU, in absence of a configured value, is simply set by ether_setup() to ETH_DATA_LEN (1500 bytes). This breaks userspace expectations in case the MTU of the lower device is higher than 1500 bytes minus headroom. This patch restores the previous behaviour on newlink operation. Since max_mtu can be negative and we update dev->mtu directly, also check it for valid minimum. Reported-by: Junhan Yan <juyan@redhat.com> Fixes: a985343b ("vxlan: refactor verification and application of configuration") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Brendan McGrath authored
One example of when an ICMPv6 packet is required to be looped back is when a host acts as both a Multicast Listener and a Multicast Router. A Multicast Router will listen on address ff02::16 for MLDv2 messages. Currently, MLDv2 messages originating from a Multicast Listener running on the same host as the Multicast Router are not being delivered to the Multicast Router. This is due to dst.input being assigned the default value of dst_discard. This results in the packet being looped back but discarded before being delivered to the Multicast Router. This patch sets dst.input to ip6_input to ensure a looped back packet is delivered to the Multicast Router. Signed-off-by: Brendan McGrath <redmcg@redmandi.dyndns.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 16 Dec, 2017 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "More fixes from testing done on the rc kernel, including more SELinux testing. Looking forward, lockdep found regression today in ipoib which is still being fixed. Summary: - Fix for SELinux on the umad SMI path. Some old hardware does not fill the PKey properly exposing another bug in the newer SELinux code. - Check the input port as we can exceed array bounds from this user supplied value - Users are unable to use the hash field support as they want due to incorrect checks on the field restrictions, correct that so the feature works as intended - User triggerable oops in the NETLINK_RDMA handler - cxgb4 driver fix for a bad interaction with CQ flushing in iser caused by patches in this merge window, and bad CQ flushing during normal close. - Unbalanced memalloc_noio in ipoib in an error path" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/ipoib: Restore MM behavior in case of tx_ring allocation failure iw_cxgb4: only insert drain cqes if wq is flushed iw_cxgb4: only clear the ARMED bit if a notification is needed RDMA/netlink: Fix general protection fault IB/mlx4: Fix RSS hash fields restrictions IB/core: Don't enforce PKey security on SMI MADs IB/core: Bound check alternate path port number
-