- 10 Jun, 2023 3 commits
-
-
Daniel Jurgens authored
Enable creation of a devlink port for EC VF vports. Signed-off-by:
Daniel Jurgens <danielj@nvidia.com> Reviewed-by:
William Tu <witu@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Daniel Jurgens authored
Add ec_vf_vport_base to HCA Capabilities 2. This indicates the base vport of embedded CPU virtual functions that are connected to the eswitch. Add ec_vf_function to query/set_hca_caps. If set this indicates accessing a virtual function on the embedded CPU by function ID. This should only be used with other_function set to 1. Signed-off-by:
Bodong Wang <bodong@nvidia.com> Reviewed-by:
-
Daniel Jurgens authored
Instead of using type specific iterators which are only used in one place just traverse the xarray. It will provide suitable ordering based on the vport numbers. This will also eliminate the need for changes here when new types are added. Signed-off-by:
Parav Pandit <parav@nvidia.com> Signed-off-by:
-
- 09 Jun, 2023 37 commits
-
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== tools: ynl-gen: code gen improvements before ethtool I was going to post ethtool but I couldn't stand the ugliness of the if conditions which were previously generated. So I cleaned that up and improved a number of other things ethtool will benefit from. ==================== Link: https://lore.kernel.org/r/20230608211200.1247213-1-kuba@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Kernel does not have padding requirements for 64b attrs. We can ignore pad attrs. Signed-off-by: -
Jakub Kicinski authored
The op_name argument is barely used and identical to op.name in all cases. Signed-off-by: -
Jakub Kicinski authored
Netlink specs support both events and notifications (former can define their own message contents). Plug in missing code to generate types, parsers and include events into notification tables. Signed-off-by: -
Jakub Kicinski authored
Don't modify the raw dicts (as loaded from YAML) to pretend that the notify attributes also exist on the ops. This makes the code easier to follow. Signed-off-by: -
Jakub Kicinski authored
Remove unused notification handlers. Signed-off-by: -
Jakub Kicinski authored
Common notification handler was supposed to be a way for the user to parse the notifications from a socket synchronously. I don't think we'll end up using it, ynl_ntf_check() works for all known use cases. Signed-off-by: -
Jakub Kicinski authored
Renegate the code to combine } and else and use tmp variable to store type. Signed-off-by: -
Jakub Kicinski authored
Reading attr type with mnl_attr_get_type() for each condition leads to most conditions being longer than 80 chars. Avoid this by reading the type to a variable on the stack. Signed-off-by: -
Jakub Kicinski authored
Code gen currently prints: } else if (... This is really ugly. Fix it by delaying printing of closing brackets in anticipation of else coming along. Signed-off-by: -
Jakub Kicinski authored
C keywords need to be avoided when naming things. Complete the list (ethtool has at least one thing called "auto"). Signed-off-by: -
Jakub Kicinski authored
Remove unnecessary includes. Signed-off-by: -
Jakub Kicinski authored
Bots started screaming that we're including stdlib.h twice. While at it move string.h into a common spot and drop stdio.h which we don't need. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5464 Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5466 Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5467Signed-off-by:
-
Jakub Kicinski authored
This reverts commit e7c5433c. Commit e7c5433c ("tools: ynl: Remove duplicated include in handshake-user.c") was applied too hastily. It changes an auto-generated file, and there's already a proper fix on the list. Link: https://lore.kernel.org/all/ZIMPLYi%2FxRih+DlC@nanopsycho/Signed-off-by:
-
Yang Li authored
./tools/net/ynl/generated/handshake-user.c: stdlib.h is included more than once. Reported-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Florian Fainelli says: ==================== LED brightness support for Broadcom PHYs This patch series adds support for controlling the LED brightness on Broadcom PHYs. ==================== Signed-off-by: -
Florian Fainelli authored
Broadcom PHYs have two LEDs selector registers which allow us to control the LED assignment, including how to turn them on/off. Signed-off-by:
Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Florian Fainelli authored
These registers are common to most PHYs and are not specific to the BCM5482, renamed the constants accordingly, no functional change. Signed-off-by:
-
David S. Miller authored
Ivan Mikhaylov says: ==================== net/ncsi: refactoring for GMA command Make one GMA function for all manufacturers, change ndo_set_mac_address to dev_set_mac_address for notifiying net layer about MAC change which ndo_set_mac_address doesn't do. Changes from v1: 1. delete ftgmac100.txt changes about mac-address-increment 2. add convert to yaml from ftgmac100.txt 3. add mac-address-increment option for ethernet-controller.yaml Changes from v2: 1. remove DT changes from series, will be done in another one ==================== Signed-off-by: -
Ivan Mikhaylov authored
Change ndo_set_mac_address to dev_set_mac_address because dev_set_mac_address provides a way to notify network layer about MAC change. In other case, services may not aware about MAC change and keep using old one which set from network adapter driver. As example, DHCP client from systemd do not update MAC address without notification from net subsystem which leads to the problem with acquiring the right address from DHCP server. Fixes: cb10c7c0 ("net/ncsi: Add NCSI Broadcom OEM command") Cc: stable@vger.kernel.org # v6.0+ 2f38e84 net/ncsi: make one oem_gma function for all mfr id Signed-off-by:
Paul Fertser <fercerpav@gmail.com> Signed-off-by:
Ivan Mikhaylov <fr0st61te@gmail.com> Reviewed-by:
-
Ivan Mikhaylov authored
Make the one Get Mac Address function for all manufacturers and change this call in handlers accordingly. Reviewed-by:
-
Foster Snowhill authored
This module has for a long time not been limited to iPhone <= 3GS. Update description to match the actual state of the driver. Remove dead link from 2010, instead reference an existing userspace iOS device pairing implementation as part of libimobiledevice. Signed-off-by:
Foster Snowhill <forst@pen.gy> Signed-off-by:
-
Foster Snowhill authored
Recent iOS releases support CDC NCM encapsulation on RX. This mode is the default on macOS and Windows. In this mode, an iOS device may include one or more Ethernet frames inside a single URB. Freshly booted iOS devices start in legacy mode, but are put into NCM mode by the official Apple driver. When reconnecting such a device from a macOS/Windows machine to a Linux host, the device stays in NCM mode, making it unusable with the legacy ipheth driver code. To correctly support such a device, the driver has to either support the NCM mode too, or put the device back into legacy mode. To match the behaviour of the macOS/Windows driver, and since there is no documented control command to revert to legacy mode, implement NCM support. The device is attempted to be put into NCM mode by default, and falls back to legacy mode if the attempt fails. Signed-off-by:
Georgi Valkov <gvalkov@gmail.com> Signed-off-by:
-
Foster Snowhill authored
The behaviour of the official iOS tethering driver on macOS is to not transmit any trailing padding at the end of URBs. This is applicable to both NCM and legacy modes, including older devices. Adapt the driver to not include trailing padding in TX URBs, matching the behaviour of the official macOS driver. Signed-off-by:
-
Georgi Valkov authored
The cleanup precedure in ipheth_probe will attempt to free a NULL pointer in dev->ctrl_buf if the memory allocation for this buffer is not successful. While kfree ignores NULL pointers, and the existing code is safe, it is a better design to rearrange the goto labels and avoid this. Signed-off-by:
-
Jakub Kicinski authored
Merge branch 'splice-net-rewrite-splice-to-socket-fix-splice_f_more-and-handle-msg_splice_pages-in-af_tls' David Howells says: ==================== splice, net: Rewrite splice-to-socket, fix SPLICE_F_MORE and handle MSG_SPLICE_PAGES in AF_TLS Here are patches to do the following: (1) Block MSG_SENDPAGE_* flags from leaking into ->sendmsg() from userspace, whilst allowing splice_to_socket() to pass them in. (2) Allow MSG_SPLICE_PAGES to be passed into tls_*_sendmsg(). Until support is added, it will be ignored and a splice-driven sendmsg() will be treated like a normal sendmsg(). TCP, UDP, AF_UNIX and Chelsio-TLS already handle the flag in net-next. (3) Replace a chain of functions to splice-to-sendpage with a single function to splice via sendmsg() with MSG_SPLICE_PAGES. This allows a bunch of pages to be spliced from a pipe in a single call using a bio_vec[] and pushes the main processing loop down into the bowels of the protocol driver rather than repeatedly calling in with a page at a time. (4) Provide a ->splice_eof() op[2] that allows splice to signal to its output that the input observed a premature EOF and that the caller didn't flag SPLICE_F_MORE, thereby allowing a corked socket to be flushed. This attempts to maintain the current behaviour. It is also not called if we didn't manage to read any data and so didn't called the actor function. This needs routing though several layers to get it down to the network protocol. [!] Note that I chose not to pass in any flags - I'm not sure it's particularly useful to pass in the splice flags; I also elected not to return any error code - though we might actually want to do that. (5) Provide tls_{device,sw}_splice_eof() to flush a pending TLS record if there is one. (6) Provide splice_eof() for UDP, TCP, Chelsio-TLS and AF_KCM. AF_UNIX doesn't seem to pay attention to the MSG_MORE or MSG_SENDPAGE_NOTLAST flags. (7) Alter the behaviour of sendfile() and fix SPLICE_F_MORE/MSG_MORE signalling[1] such SPLICE_F_MORE is always signalled until we have read sufficient data to finish the request. If we get a zero-length before we've managed to splice sufficient data, we now leave the socket expecting more data and leave it to userspace to deal with it. (8) Make AF_TLS handle the MSG_SPLICE_PAGES internal sendmsg flag. MSG_SPLICE_PAGES is an internal hint that tells the protocol that it should splice the pages supplied if it can. Its sendpage implementations are then turned into wrappers around that. Link: https://lore.kernel.org/r/499791.1685485603@warthog.procyon.org.uk/ [1] Link: https://lore.kernel.org/r/CAHk-=wh=V579PDYvkpnTobCLGczbgxpMgGmmhqiTyE34Cpi5Gg@mail.gmail.com/ [2] Link: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=51c78a4d532efe9543a4df019ff405f05c6157f6 # part 1 Link: https://lore.kernel.org/r/20230524153311.3625329-1-dhowells@redhat.com/ # v1 ==================== Link: https://lore.kernel.org/r/20230607181920.2294972-1-dhowells@redhat.comSigned-off-by: -
David Howells authored
Convert tls_device_sendpage() to use sendmsg() with MSG_SPLICE_PAGES rather than directly splicing in the pages itself. With that, the tls_iter_offset union is no longer necessary and can be replaced with an iov_iter pointer and the zc_page argument to tls_push_data() can also be removed. This allows ->sendpage() to be replaced by something that can handle multiple multipage folios in a single transaction. Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by:
-
David Howells authored
Make TLS's device sendmsg() support MSG_SPLICE_PAGES. This causes pages to be spliced from the source iterator if possible. This allows ->sendpage() to be replaced by something that can handle multiple multipage folios in a single transaction. Signed-off-by:
-
David Howells authored
Convert tls_sw_sendpage() and tls_sw_sendpage_locked() to use sendmsg() with MSG_SPLICE_PAGES rather than directly splicing in the pages itself. [!] Note that tls_sw_sendpage_locked() appears to have the wrong locking upstream. I think the caller will only hold the socket lock, but it should hold tls_ctx->tx_lock too. This allows ->sendpage() to be replaced by something that can handle multiple multipage folios in a single transaction. Signed-off-by: -
David Howells authored
Make TLS's sendmsg() support MSG_SPLICE_PAGES. This causes pages to be spliced from the source iterator if possible. This allows ->sendpage() to be replaced by something that can handle multiple multipage folios in a single transaction. Signed-off-by:
-
David Howells authored
splice_direct_to_actor() doesn't manage SPLICE_F_MORE correctly[1] - and, as a result, it incorrectly signals/fails to signal MSG_MORE when splicing to a socket. The problem I'm seeing happens when a short splice occurs because we got a short read due to hitting the EOF on a file: as the length read (read_len) is less than the remaining size to be spliced (len), SPLICE_F_MORE (and thus MSG_MORE) is set. The issue is that, for the moment, we have no way to know *why* the short read occurred and so can't make a good decision on whether we *should* keep MSG_MORE set. MSG_SENDPAGE_NOTLAST was added to work around this, but that is also set incorrectly under some circumstances - for example if a short read fills a single pipe_buffer, but the next read would return more (seqfile can do this). This was observed with the multi_chunk_sendfile tests in the tls kselftest program. Some of those tests would hang and time out when the last chunk of file was less than the sendfile request size: build/kselftest/net/tls -r tls.12_aes_gcm.multi_chunk_sendfile This has been observed before[2] and worked around in AF_TLS[3]. Fix this by making splice_direct_to_actor() always signal SPLICE_F_MORE if we haven't yet hit the requested operation size. SPLICE_F_MORE remains signalled if the user passed it in to splice() but otherwise gets cleared when we've read sufficient data to fulfill the request. If, however, we get a premature EOF from ->splice_read(), have sent at least one byte and SPLICE_F_MORE was not set by the caller, ->splice_eof() will be invoked. Signed-off-by:
-
David Howells authored
Allow splice to undo the effects of MSG_MORE after prematurely ending a splice/sendfile due to getting an EOF condition (->splice_read() returned 0) after splice had called sendmsg() with MSG_MORE set when the user didn't set MSG_MORE. Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/CAHk-=wh=V579PDYvkpnTobCLGczbgxpMgGmmhqiTyE34Cpi5Gg@mail.gmail.com/Signed-off-by:
-
David Howells authored
Allow splice to end a Chelsio TLS record after prematurely ending a splice/sendfile due to getting an EOF condition (->splice_read() returned 0) after splice had called sendmsg() with MSG_MORE set when the user didn't set MSG_MORE. Suggested-by:
-
David Howells authored
Allow splice to undo the effects of MSG_MORE after prematurely ending a splice/sendfile due to getting an EOF condition (->splice_read() returned 0) after splice had called sendmsg() with MSG_MORE set when the user didn't set MSG_MORE. For UDP, a pending packet will not be emitted if the socket is closed before it is flushed; with this change, it be flushed by ->splice_eof(). For TCP, it's not clear that MSG_MORE is actually effective. Suggested-by:
-
David Howells authored
Allow splice to end a TLS record after prematurely ending a splice/sendfile due to getting an EOF condition (->splice_read() returned 0) after splice had called TLS with a sendmsg() with MSG_MORE set when the user didn't set MSG_MORE. Suggested-by:
-
David Howells authored
Allow splice to end a TLS record after prematurely ending a splice/sendfile due to getting an EOF condition (->splice_read() returned 0) after splice had called TLS with a sendmsg() with MSG_MORE set when the user didn't set MSG_MORE. Suggested-by:
-
David Howells authored
Add an optional method, ->splice_eof(), to allow splice to indicate the premature termination of a splice to struct file_operations and struct proto_ops. This is called if sendfile() or splice() encounters all of the following conditions inside splice_direct_to_actor(): (1) the user did not set SPLICE_F_MORE (splice only), and (2) an EOF condition occurred (->splice_read() returned 0), and (3) we haven't read enough to fulfill the request (ie. len > 0 still), and (4) we have already spliced at least one byte. A further patch will modify the behaviour of SPLICE_F_MORE to always be passed to the actor if either the user set it or we haven't yet read sufficient data to fulfill the request. Suggested-by:
-
