Pull thermal control fix from Rafael Wysocki:
 "Modify __thermal_cooling_device_register() to make it call
  put_device() after invoking device_register() and fix up a few error
  paths calling thermal_cooling_device_destroy_sysfs() unnecessarily
  (Viresh Kumar)"

* tag 'thermal-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: core: call put_device() only after device_register() fails

Pull ACPI fixes from Rafael Wysocki:
 "These update the ACPICA entry in MAINTAINERS, add a backlight handling
  quirk and fix the ACPI PRM (platform runtime) mechanism support.

  Specifics:

   - Update the ACPICA development list address in MAINTAINERS to the
     new one that does not bounce (Rafael Wysocki)

   - Check whether EFI runtime is available when registering the ACPI
     PRM address space handler and when running it (Ard Biesheuvel)

   - Add backlight=native DMI quirk for Acer Aspire 4810T to the ACPI
     video driver (Hans de Goede)"

* tag 'acpi-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: PRM: Check whether EFI runtime is available
  ACPI: video: Add backlight=native DMI quirk for Acer Aspire 4810T
  MAINTAINERS: Update the ACPICA development list address

Pull MMC fixes from Ulf Hansson:

 - sunxi-mmc: Fix clock refcount imbalance during unbind

 - sdhci-esdhc-imx: Fix some tuning settings

* tag 'mmc-v6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sunxi-mmc: Fix clock refcount imbalance during unbind
  mmc: sdhci-esdhc-imx: correct the tuning start tap and step setting

Pull ARM SoC DT and driver fixes from Arnd Bergmann:
 "Lots of dts fixes for Qualcomm Snapdragon and NXP i.MX platforms,
  including:

   - A regression fix for SDHCI controllers on Inforce 6540, and another
     SDHCI fix on SM8350

   - Reenable cluster idle on sm8250 after the the code fix is upstream

   - multiple fixes for the QMP PHY binding, needing an incompatible dt
     change

   - The reserved memory map is updated on Xiaomi Mi 4C and Huawei Nexus
     6P, to avoid instabilities caused by use of protected memory
     regions

   - Fix i.MX8MP DT for missing GPC Interrupt, power-domain typo and USB
     clock error

   - A couple of verdin-imx8mm DT fixes for audio playback support

   - Fix pca9547 i2c-mux node name for i.MX and Vybrid device trees

   - Fix an imx93-11x11-evk uSDHC pad setting problem that causes Micron
     eMMC CMD8 CRC error in HS400ES/HS400 mode

  The remaining ARM and RISC-V platforms only have very few smaller dts
  bugfixes this time:

   - A fix for the SiFive unmatched board's PCI memory space

   - A revert to fix a regression with GPIO on Marvell Armada

   - A fix for the UART address on Marvell AC5

   - Missing chip-select phandles for stm32 boards

   - Selecting the correct clock for the sam9x60 memory controller

   - Amlogic based Odroid-HC4 needs a revert to restore USB
     functionality.

  And finally, there are some minor code fixes:

   - Build fixes for OMAP1, pxa, riscpc, raspberry pi firmware, and zynq
     firmware

   - memory controller driver fixes for an OMAP regression and older
     bugs on tegra, atmel and mvebu

   - reset controller fixes for ti-sci and uniphier platforms

   - ARM SCMI firmware fixes for a couple of rare corner cases

   - Qualcomm platform driver fixes for incorrect error handling and a
     backwards compatibility fix for the apr driver using older dtb

   - NXP i.MX SoC driver fixes for HDMI output, error handling in the
     imx8 soc-id and missing reference counting on older cpuid code"

* tag 'soc-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (60 commits)
  firmware: zynqmp: fix declarations for gcc-13
  ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l
  ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp157c-emstamp-argon
  ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som
  ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som
  ARM: dts: at91: sam9x60: fix the ddr clock for sam9x60
  ARM: omap1: fix building gpio15xx
  ARM: omap1: fix !ARCH_OMAP1_ANY link failures
  firmware: raspberrypi: Fix type assignment
  arm64: dts: qcom: msm8992-libra: Fix the memory map
  arm64: dts: qcom: msm8992: Don't use sfpb mutex
  PM: AVS: qcom-cpr: Fix an error handling path in cpr_probe()
  arm64: dts: msm8994-angler: fix the memory map
  arm64: dts: marvell: AC5/AC5X: Fix address for UART1
  ARM: footbridge: drop unnecessary inclusion
  Revert "ARM: dts: armada-39x: Fix compatible string for gpios"
  Revert "ARM: dts: armada-38x: Fix compatible string for gpios"
  ARM: pxa: enable PXA310/PXA320 for DT-only build
  riscv: dts: sifive: fu740: fix size of pcie 32bit memory
  soc: qcom: apr: Make qcom,protection-domain optional again
  ...

Pull drm fixes from Dave Airlie:
 "Just a pretty regular week for this stage of things, amdgpu and i915,
  along with some msm and misc others.

  fb-helper:
   - switcheroo fix

  msm:
   - kexec shutdown fix
   - fix potential double free

  i915:
   - Reject display plane with height == 0
   - re-disable RC6p on Sandy Bridge
   - Fix hugepages' selftest
   - DG2 hw workarounds
   - switcheroo fix

  vc4:
   - fix a memory leak

  panfrost:
   - Kconfig fix

  amdgpu:
   - Fix display scaling
   - Fix RN/CZN power reporting on some firmware versions
   - Colorspace fixes
   - Fix resource freeing in error case in CS IOCTL
   - Fix warning on driver unload
   - GC11 fixes
   - DCN 3.1.4/5 S/G display workarounds"

* tag 'drm-fixes-2023-01-20' of git://anongit.freedesktop.org/drm/drm: (24 commits)
  drm/amd/display: disable S/G display on DCN 3.1.4
  drm/amd/display: disable S/G display on DCN 3.1.5
  drm/amdgpu: allow multipipe policy on ASICs with one MEC
  drm/amdgpu: correct MEC number for gfx11 APUs
  drm/amd/display: fix issues with driver unload
  drm/amdgpu: fix amdgpu_job_free_resources v2
  drm/amd/display: Fix COLOR_SPACE_YCBCR2020_TYPE matrix
  drm/amd/display: Calculate output_color_space after pixel encoding adjustment
  drm/amdgpu: fix cleaning up reserved VMID on release
  drm/amdgpu: Correct the power calcultion for Renior/Cezanne.
  drm/amd/display: Fix set scaling doesn's work
  drm/i915: Remove unused variable
  drm/i915/dg2: Introduce Wa_18019271663
  drm/i915/dg2: Introduce Wa_18018764978
  drm/fb-helper: Set framebuffer for vga-switcheroo clients
  drm/i915: Allow switching away via vga-switcheroo if uninitialized
  drm/i915/selftests: Unwind hugepages to drop wakeref on error
  drm/i915: re-disable RC6p on Sandy Bridge
  drm/panfrost: fix GENERIC_ATOMIC64 dependency
  drm/i915/display: Check source height is > 0
  ...

Pull dmaengine fixes from Vinod Koul:

 - email address Update for Jie Hai

 - fix double increment of client_count in dma_chan_get()

 - idxd driver fixes: use after free, probe error handling and callback
   on wq disable

 - fix for qcom gpi driver GO tre

 - ptdma locking fix

 - tegra & imx-sdma mem leak fix

* tag 'dmaengine-fix-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  ptdma: pt_core_execute_cmd() should use spinlock
  dmaengine: tegra: Fix memory leak in terminate_all()
  dmaengine: xilinx_dma: call of_node_put() when breaking out of for_each_child_of_node()
  dmaengine: imx-sdma: Fix a possible memory leak in sdma_transfer_init
  dmaengine: Fix double increment of client_count in dma_chan_get()
  dmaengine: tegra210-adma: fix global intr clear
  Add exception protection processing for vd in axi_chan_handle_err function
  dmaengine: lgm: Move DT parsing after initialization
  MAINTAINERS: update Jie Hai's email address
  dmaengine: ti: k3-udma: Do conditional decrement of UDMA_CHAN_RT_PEER_BCNT_REG
  dmaengine: idxd: Do not call DMX TX callbacks during workqueue disable
  dmaengine: idxd: Prevent use after free on completion memory
  dmaengine: idxd: Let probe fail when workqueue cannot be enabled
  dmaengine: qcom: gpi: Set link_rx bit on GO TRE for rx operation

Pull phy fixes from Vinod Koul:

 - binding fix for g12a phys

 - Kconfig operator precedence for TI driver

 - renesas: register setting

 - sunplus: null deref fix

 - rockchip-inno fix for clk_disable_unprepare()

 - MDM9607 init sequence revert due to regression

* tag 'phy-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: phy-can-transceiver: Skip warning if no "max-bitrate"
  dt-bindings: phy: g12a-usb2-phy: fix compatible string documentation
  dt-bindings: phy: g12a-usb3-pcie-phy: fix compatible string documentation
  phy: freescale: imx8m-pcie: Add one missing error return
  phy: Revert "phy: qualcomm: usb28nm: Add MDM9607 init sequence"
  phy: rockchip-inno-usb2: Fix missing clk_disable_unprepare() in rockchip_usb2phy_power_on()
  phy: renesas: r8a779f0-eth-serdes: Fix register setting
  phy: usb: sunplus: Fix potential null-ptr-deref in sp_usb_phy_probe()
  phy: ti: fix Kconfig warning and operator precedence

Pull networking fixes from Jakub Kicinski:
 "Including fixes from wireless, bluetooth, bpf and netfilter.

  Current release - regressions:

   - Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6
     addrconf", fix nsna_ping mode of team

   - wifi: mt76: fix bugs in Rx queue handling and DMA mapping

   - eth: mlx5:
      - add missing mutex_unlock in error reporter
      - protect global IPsec ASO with a lock

  Current release - new code bugs:

   - rxrpc: fix wrong error return in rxrpc_connect_call()

  Previous releases - regressions:

   - bluetooth: hci_sync: fix use of HCI_OP_LE_READ_BUFFER_SIZE_V2

   - wifi:
      - mac80211: fix crashes on Rx due to incorrect initialization of
        rx->link and rx->link_sta
      - mac80211: fix bugs in iTXQ conversion - Tx stalls, incorrect
        aggregation handling, crashes
      - brcmfmac: fix regression for Broadcom PCIe wifi devices
      - rndis_wlan: prevent buffer overflow in rndis_query_oid

   - netfilter: conntrack: handle tcp challenge acks during connection
     reuse

   - sched: avoid grafting on htb_destroy_class_offload when destroying

   - virtio-net: correctly enable callback during start_xmit, fix stalls

   - tcp: avoid the lookup process failing to get sk in ehash table

   - ipa: disable ipa interrupt during suspend

   - eth: stmmac: enable all safety features by default

  Previous releases - always broken:

   - bpf:
      - fix pointer-leak due to insufficient speculative store bypass
        mitigation (Spectre v4)
      - skip task with pid=1 in send_signal_common() to avoid a splat
      - fix BPF program ID information in BPF_AUDIT_UNLOAD as well as
        PERF_BPF_EVENT_PROG_UNLOAD events
      - fix potential deadlock in htab_lock_bucket from same bucket
        index but different map_locked index

   - bluetooth:
      - fix a buffer overflow in mgmt_mesh_add()
      - hci_qca: fix driver shutdown on closed serdev
      - ISO: fix possible circular locking dependency
      - CIS: hci_event: fix invalid wait context

   - wifi: brcmfmac: fixes for survey dump handling

   - mptcp: explicitly specify sock family at subflow creation time

   - netfilter: nft_payload: incorrect arithmetics when fetching VLAN
     header bits

   - tcp: fix rate_app_limited to default to 1

   - l2tp: close all race conditions in l2tp_tunnel_register()

   - eth: mlx5: fixes for QoS config and eswitch configuration

   - eth: enetc: avoid deadlock in enetc_tx_onestep_tstamp()

   - eth: stmmac: fix invalid call to mdiobus_get_phy()

  Misc:

   - ethtool: add netlink attr in rss get reply only if the value is not
     empty"

* tag 'net-6.2-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
  Revert "Merge branch 'octeontx2-af-CPT'"
  tcp: fix rate_app_limited to default to 1
  bnxt: Do not read past the end of test names
  net: stmmac: enable all safety features by default
  octeontx2-af: add mbox to return CPT_AF_FLT_INT info
  octeontx2-af: update cpt lf alloc mailbox
  octeontx2-af: restore rxc conf after teardown sequence
  octeontx2-af: optimize cpt pf identification
  octeontx2-af: modify FLR sequence for CPT
  octeontx2-af: add mbox for CPT LF reset
  octeontx2-af: recover CPT engine when it gets fault
  net: dsa: microchip: ksz9477: port map correction in ALU table entry register
  selftests/net: toeplitz: fix race on tpacket_v3 block close
  net/ulp: use consistent error code when blocking ULP
  octeontx2-pf: Fix the use of GFP_KERNEL in atomic context on rt
  tcp: avoid the lookup process failing to get sk in ehash table
  Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf"
  MAINTAINERS: add networking entries for Willem
  net: sched: gred: prevent races when adding offloads to stats
  l2tp: prevent lockdep issue in l2tp_tunnel_register()
  ...

Merge an ACPI PRM (platform runtime) support fix and an ACPI backlight
quirk for 6.2-rc5:

 - Check whether EFI runtime is available when registering the ACPI PRM
   address space handler and when running it (Ard Biesheuvel).

 - Add backlight=native DMI quirk for Acer Aspire 4810T to the ACPI
   video driver (Hans de Goede).

* acpi-prm:
  ACPI: PRM: Check whether EFI runtime is available

* acpi-video:
  ACPI: video: Add backlight=native DMI quirk for Acer Aspire 4810T

This reverts commit b4fbf0b2, reversing
changes made to 6c977c5c.

This seems like net-next material.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The initial default value of 0 for tp->rate_app_limited was incorrect,
since a flow is indeed application-limited until it first sends
data. Fixing the default to be 1 is generally correct but also
specifically will help user-space applications avoid using the initial
tcpi_delivery_rate value of 0 that persists until the connection has
some non-zero bandwidth sample.

Fixes: eb8329e0 ("tcp: export data delivery rate")
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David Morley <morleyd@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Tested-by: David Morley <morleyd@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Test names were being concatenated based on a offset beyond the end of
the first name, which tripped the buffer overflow detection logic:

 detected buffer overflow in strnlen
 [...]
 Call Trace:
 bnxt_ethtool_init.cold+0x18/0x18

Refactor struct hwrm_selftest_qlist_output to use an actual array,
and adjust the concatenation to use snprintf() rather than a series of
strncat() calls.
Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com>
Link: https://lore.kernel.org/lkml/Y8F%2F1w1AZTvLglFX@x1-carbon/Tested-by: Niklas Cassel <Niklas.Cassel@wdc.com>
Fixes: eb513658 ("bnxt_en: Add basic ethtool -t selftest support.")
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

gcc-13.0.1 reports a type mismatch for two functions:

drivers/firmware/xilinx/zynqmp.c:1228:5: error: conflicting types for 'zynqmp_pm_set_rpu_mode' due to enum/integer mismatch; have 'int(u32,  enum rpu_oper_mode)' {aka 'int(unsigned int,  enum rpu_oper_mode)'} [-Werror=enum-int-mismatch]
 1228 | int zynqmp_pm_set_rpu_mode(u32 node_id, enum rpu_oper_mode rpu_mode)
      |     ^~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/firmware/xilinx/zynqmp.c:25:
include/linux/firmware/xlnx-zynqmp.h:552:5: note: previous declaration of 'zynqmp_pm_set_rpu_mode' with type 'int(u32,  u32)' {aka 'int(unsigned int,  unsigned int)'}
  552 | int zynqmp_pm_set_rpu_mode(u32 node_id, u32 arg1);
      |     ^~~~~~~~~~~~~~~~~~~~~~
drivers/firmware/xilinx/zynqmp.c:1246:5: error: conflicting types for 'zynqmp_pm_set_tcm_config' due to enum/integer mismatch; have 'int(u32,  enum rpu_tcm_comb)' {aka 'int(unsigned int,  enum rpu_tcm_comb)'} [-Werror=enum-int-mismatch]
 1246 | int zynqmp_pm_set_tcm_config(u32 node_id, enum rpu_tcm_comb tcm_mode)
      |     ^~~~~~~~~~~~~~~~~~~~~~~~
include/linux/firmware/xlnx-zynqmp.h:553:5: note: previous declaration of 'zynqmp_pm_set_tcm_config' with type 'int(u32,  u32)' {aka 'int(unsigned int,  unsigned int)'}
  553 | int zynqmp_pm_set_tcm_config(u32 node_id, u32 arg1);
      |     ^~~~~~~~~~~~~~~~~~~~~~~~

Change the declaration in the header to match the function definition.
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'at91-fixes-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes

AT91 fixes for 6.2:

It contains:
- fix the clock provided via DT for DDR controller on SAM9X60

* tag 'at91-fixes-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: at91: sam9x60: fix the ddr clock for sam9x60

Link: https://lore.kernel.org/r/20230119112101.42045-1-claudiu.beznea@microchip.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'stm32-dt-for-v6.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/fixes

STM32 DT fixes for v6.2, round 1

Highlights:
-----------

 -STM32MP15:
  - Fix missing chip select phandle in several stm32mp15x based boards.

* tag 'stm32-dt-for-v6.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l
  ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp157c-emstamp-argon
  ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som
  ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som

Link: https://lore.kernel.org/r/3fe26bf9-297b-5c78-682b-37fa6d8b6190@foss.st.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

In the original implementation of dwmac5
commit 8bf993a5 ("net: stmmac: Add support for DWMAC5 and implement Safety Features")
all safety features were enabled by default.

Later it seems some implementations didn't have support for all the
features, so in
commit 5ac712dc ("net: stmmac: enable platform specific safety features")
the safety_feat_cfg structure was added to the callback and defined for
some platforms to selectively enable these safety features.

The problem is that only certain platforms were given that software
support. If the automotive safety package bit is set in the hardware
features register the safety feature callback is called for the platform,
and for platforms that didn't get a safety_feat_cfg defined this results
in the following NULL pointer dereference:

[    7.933303] Call trace:
[    7.935812]  dwmac5_safety_feat_config+0x20/0x170 [stmmac]
[    7.941455]  __stmmac_open+0x16c/0x474 [stmmac]
[    7.946117]  stmmac_open+0x38/0x70 [stmmac]
[    7.950414]  __dev_open+0x100/0x1dc
[    7.954006]  __dev_change_flags+0x18c/0x204
[    7.958297]  dev_change_flags+0x24/0x6c
[    7.962237]  do_setlink+0x2b8/0xfa4
[    7.965827]  __rtnl_newlink+0x4ec/0x840
[    7.969766]  rtnl_newlink+0x50/0x80
[    7.973353]  rtnetlink_rcv_msg+0x12c/0x374
[    7.977557]  netlink_rcv_skb+0x5c/0x130
[    7.981500]  rtnetlink_rcv+0x18/0x2c
[    7.985172]  netlink_unicast+0x2e8/0x340
[    7.989197]  netlink_sendmsg+0x1a8/0x420
[    7.993222]  ____sys_sendmsg+0x218/0x280
[    7.997249]  ___sys_sendmsg+0xac/0x100
[    8.001103]  __sys_sendmsg+0x84/0xe0
[    8.004776]  __arm64_sys_sendmsg+0x24/0x30
[    8.008983]  invoke_syscall+0x48/0x114
[    8.012840]  el0_svc_common.constprop.0+0xcc/0xec
[    8.017665]  do_el0_svc+0x38/0xb0
[    8.021071]  el0_svc+0x2c/0x84
[    8.024212]  el0t_64_sync_handler+0xf4/0x120
[    8.028598]  el0t_64_sync+0x190/0x194

Go back to the original behavior, if the automotive safety package
is found to be supported in hardware enable all the features unless
safety_feat_cfg is passed in saying this particular platform only
supports a subset of the features.

Fixes: 5ac712dc ("net: stmmac: enable platform specific safety features")
Reported-by: Ning Cai <ncai@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Srujana Challa says:

====================
octeontx2-af: Miscellaneous changes for CPT

This patchset consists of miscellaneous changes for CPT.
- Adds a new mailbox to reset the requested CPT LF.
- Modify FLR sequence as per HW team suggested.
- Adds support to recover CPT engines when they gets fault.
- Updates CPT inbound inline IPsec configuration mailbox,
  as per new generation of the OcteonTX2 chips.
- Adds a new mailbox to return CPT FLT Interrupt info.

---
v2:
- Addressed a review comment.
v1:
- Dropped patch "octeontx2-af: Fix interrupt name strings completely"
  to submit to net.
---
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

CPT HW would trigger the CPT AF FLT interrupt when CPT engines
hits some uncorrectable errors and AF is the one which receives
the interrupt and recovers the engines.
This patch adds a mailbox for CPT VFs to request for CPT faulted
and recovered engines info.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The CN10K CPT coprocessor contains a context processor
to accelerate updates to the IPsec security association
contexts. The context processor contains a context cache.
This patch updates CPT LF ALLOC mailbox to config ctx_ilen
requested by VFs. CPT_LF_ALLOC:ctx_ilen is the size of
initial context fetch.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

CN10K CPT coprocessor includes a component named RXC which
is responsible for reassembly of inner IP packets. RXC has
the feature to evict oldest entries based on age/threshold.
The age/threshold is being set to minimum values to evict
all entries at the time of teardown.
This patch adds code to restore timeout and threshold config
after teardown sequence is complete as it is global config.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Optimize CPT PF identification in mbox handling for faster
mbox response by doing it at AF driver probe instead of
every mbox message.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On OcteonTX2 platform CPT instruction enqueue is only
possible via LMTST operations.
The existing FLR sequence mentioned in HRM requires
a dummy LMTST to CPT but LMTST can't be submitted from
AF driver. So, HW team provided a new sequence to avoid
dummy LMTST. This patch adds code for the same.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On OcteonTX2 SoC, the admin function (AF) is the only one with all
priviliges to configure HW and alloc resources, PFs and it's VFs
have to request AF via mailbox for all their needs.
This patch adds a new mailbox for CPT VFs to request for CPT LF
reset.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When CPT engine has uncorrectable errors, it will get halted and
must be disabled and re-enabled. This patch adds code for the same.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'amd-drm-fixes-6.2-2023-01-19' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.2-2023-01-19:

amdgpu:
- Fix display scaling
- Fix RN/CZN power reporting on some firmware versions
- Colorspace fixes
- Fix resource freeing in error case in CS IOCTL
- Fix warning on driver unload
- GC11 fixes
- DCN 3.1.4/5 S/G display workarounds
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230119195908.7670-1-alexander.deucher@amd.com

A fix for vc4 to address a memory leak when allocating a buffer, a
Kconfig fix for panfrost and two fixes for i915 and fb-helper to
address some bugs with vga-switcheroo.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230119082059.h32bs7zqoxmjbcvn@houat

Merge tag 'drm-intel-fixes-2023-01-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Reject display plane with height == 0 (Drew)
- re-disable RC6p on Sandy Bridge (Sasa)
- Fix hugepages' selftest (Chris)
- DG2 hw workarounds (Matt Atwood)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8mf3/ANNWctpc7R@intel.com

Merge tag 'perf-tools-fixes-for-v6.2-3-2023-01-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Prevent reading into undefined memory in the expression lexer,
   accounting for a trailer backslash followed by the null byte.

 - Fix file mode when copying files to the build id cache, the problem
   happens when the cache directory is in a different file system than
   the file being cached, otherwise the mode was preserved as only a
   hard link would be done to save space.

 - Fix a related build-id 'perf test' entry that checked that permission
   when caching PE (Portable Executable) files, used when profiling
   Windows executables under wine.

 - Sync the tools/ copies of kvm headers, build_bug.h, socket.h and
   arm64's cputype.h with the kernel sources.

* tag 'perf-tools-fixes-for-v6.2-3-2023-01-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf test build-id: Fix test check for PE file
  perf buildid-cache: Fix the file mode with copyfile() while adding file to build-id cache
  perf expr: Prevent normalize() from reading into undefined memory in the expression lexer
  tools headers: Syncronize linux/build_bug.h with the kernel sources
  perf beauty: Update copy of linux/socket.h with the kernel sources
  tools headers arm64: Sync arm64's cputype.h with the kernel sources
  tools kvm headers arm64: Update KVM header from the kernel sources
  tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
  tools headers UAPI: Sync linux/kvm.h with the kernel sources

msm-fixes for v6.3-rc5

Two GPU fixes which were meant to be part of the previous pull request,
but I'd forgotten to fetch from gitlab after the MR was merged so that
git tag was applied to the wrong commit.

- kexec shutdown fix
- fix potential double free
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGskguoVsz2wqAK2k+f32LwcVY5JC6+e2RwLqZswz3RY2Q@mail.gmail.com

Pull printk fixes from Petr Mladek:

 - Prevent a potential deadlock when configuring kgdb console

 - Fix a kernel doc warning

* tag 'printk-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  kernel/printk/printk.c: Fix W=1 kernel-doc warning
  tty: serial: kgdboc: fix mutex locking order for configure_kgdboc()

Pull s390 build fix from Heiko Carstens:

 - Workaround invalid gcc-11 out of bounds read warning caused by s390's
   S390_lowcore definition. This happens only with gcc 11.1.0 and
   11.2.0.

   The code which causes this warning will be gone with the next merge
   window. Therefore just replace the memcpy() with a for loop to get
   rid of the warning.

* tag 's390-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: workaround invalid gcc-11 out of bounds read warning

Pull slab fix from Vlastimil Babka:
 "Just a single fix, since the lkp report originally for a slub-tiny
  commit ended up being a gcov/compiler bug:

   - periodically resched in SLAB's drain_freelist(), by David Rientjes"

* tag 'slab-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  mm, slab: periodically resched in drain_freelist()

put_device() shouldn't be called before a prior call to
device_register(). __thermal_cooling_device_register() doesn't follow
that properly and needs fixing. Also
thermal_cooling_device_destroy_sysfs() is getting called unnecessarily
on few error paths.

Fix all this by placing the calls at the right place.

Based on initial work done by Caleb Connolly.

Fixes: 4748f968 ("thermal: core: fix some possible name leaks in error paths")
Fixes: c408b3d1 ("thermal: Validate new state in cur_state_store()")
Reported-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Frank Rowand <frowand.list@gmail.com>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull zonefs fix from Damien Le Moal:

 - A single patch to fix sync write operations to detect and handle
   errors due to external zone corruptions resulting in writes at
   invalid location, from me.

* tag 'zonefs-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: Detect append writes at invalid locations

ALU table entry 2 register in KSZ9477 have bit positions reserved for
forwarding port map. This field is referred in ksz9477_fdb_del() for
clearing forward port map and alu table.

But current fdb_del refer ALU table entry 3 register for accessing forward
port map. Update ksz9477_fdb_del() to get forward port map from correct
alu table entry register.

With this bug, issue can be observed while deleting static MAC entries.
Delete any specific MAC entry using "bridge fdb del" command. This should
clear all the specified MAC entries. But it is observed that entries with
self static alone are retained.

Tested on LAN9370 EVB since ksz9477_fdb_del() is used common across
LAN937x and KSZ series.

Fixes: b987e98e ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Rakesh Sankaranarayanan <rakesh.sankaranarayanan@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20230118174735.702377-1-rakesh.sankaranarayanan@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Avoid race between process wakeup and tpacket_v3 block timeout.

The test waits for cfg_timeout_msec for packets to arrive. Packets
arrive in tpacket_v3 rings, which pass packets ("frames") to the
process in batches ("blocks"). The sk waits for req3.tp_retire_blk_tov
msec to release a block.

Set the block timeout lower than the process waiting time, else
the process may find that no block has been released by the time it
scans the socket list. Convert to a ring of more than one, smaller,
blocks with shorter timeouts. Blocks must be page aligned, so >= 64KB.

Fixes: 5ebfb4cc ("selftests/net: toeplitz test")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230118151847.4124260-1-willemdebruijn.kernel@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The referenced commit changed the error code returned by the kernel
when preventing a non-established socket from attaching the ktls
ULP. Before to such a commit, the user-space got ENOTCONN instead
of EINVAL.

The existing self-tests depend on such error code, and the change
caused a failure:

  RUN           global.non_established ...
 tls.c:1673:non_established:Expected errno (22) == ENOTCONN (107)
 non_established: Test failed at step #3
          FAIL  global.non_established

In the unlikely event existing applications do the same, address
the issue by restoring the prior error code in the above scenario.

Note that the only other ULP performing similar checks at init
time - smc_ulp_ops - also fails with ENOTCONN when trying to attach
the ULP to a non-established socket.
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Fixes: 2c02d41d ("net/ulp: prevent ULP without clone op from entering the LISTEN status")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/7bb199e7a93317fb6f8bf8b9b2dc71c18f337cde.1674042685.git.pabeni@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================

This series provides bug fixes to mlx5 driver.

* tag 'mlx5-fixes-2023-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net: mlx5: eliminate anonymous module_init & module_exit
  net/mlx5: E-switch, Fix switchdev mode after devlink reload
  net/mlx5e: Protect global IPsec ASO
  net/mlx5e: Remove optimization which prevented update of ESN state
  net/mlx5e: Set decap action based on attr for sample
  net/mlx5e: QoS, Fix wrongfully setting parent_element_id on MODIFY_SCHEDULING_ELEMENT
  net/mlx5: E-switch, Fix setting of reserved fields on MODIFY_SCHEDULING_ELEMENT
  net/mlx5e: Remove redundant xsk pointer check in mlx5e_mpwrq_validate_xsk
  net/mlx5e: Avoid false lock dependency warning on tc_ht even more
  net/mlx5: fix missing mutex_unlock in mlx5_fw_fatal_reporter_err_work()
====================

Link: https://lore.kernel.org/r/Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The interrupt handler (pt_core_irq_handler()) of the ptdma
driver can be called from interrupt context. The code flow
in this function can lead down to pt_core_execute_cmd() which
will attempt to grab a mutex, which is not appropriate in
interrupt context and ultimately leads to a kernel panic.
The fix here changes this mutex to a spinlock, which has
been verified to resolve the issue.

Fixes: fa5d823b ("dmaengine: ptdma: Initial driver for the AMD PTDMA")
Signed-off-by: Eric Pilmore <epilmore@gigaio.com>
Link: https://lore.kernel.org/r/20230119033907.35071-1-epilmore@gigaio.comSigned-off-by: Vinod Koul <vkoul@kernel.org>