- 05 Oct, 2020 4 commits
-
-
Chris Park authored
[Why] Formula uses kHz in their formula while our driver operates with Hz. [How] Divide audio rate by 1000 on the initial variable that is entered into formula. Signed-off-by:
Chris Park <Chris.Park@amd.com> Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
Eryk Brol <eryk.brol@amd.com> Acked-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Rodrigo Siqueira authored
[Why] Sometimes CRTCs can be disabled due to display unplugging or temporarily transition in the userspace; in these circumstances, DCE tries to set the minimum clock threshold. When we have this situation, the function bw_calcs is invoked with number_of_displays set to zero, making DCE set dispclk_khz and sclk_khz to zero. For these reasons, we have seen some ATOM bios errors that look like: [drm:atom_op_jump [amdgpu]] *ERROR* atombios stuck in loop for more than 5secs aborting [drm:amdgpu_atom_execute_table_locked [amdgpu]] *ERROR* atombios stuck executing EA8A (len 761, WS 0, PS 0) @ 0xEABA [How] This error happens due to an attempt to optimize the bandwidth using the sclk, and the dispclk clock set to zero. Technically we handle this in the function dce112_set_clock, but we are not considering the case that this value is set to zero. This commit fixes this issue by ensuring that we never set a minimum value below the minimum clock threshold. Signed-off-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by:
-
Alex Sierra authored
align frag_end to the next pd when there are no page table entries on the current pde. This fixes invalidation of larger address space areas where some page tables are allocated and other aren't. Signed-off-by:
Alex Sierra <alex.sierra@amd.com> Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Dirk Gouders authored
Commit c1cf79ca ("drm/amdgpu: use IP discovery table for renoir") introduced a NULL pointer dereference when booting with amdgpu.discovery=0, because it removed the call of vega10_reg_base_init() for that case. Fix this by calling that funcion if amdgpu_discovery == 0 in addition to the case that amdgpu_discovery_reg_base_init() failed. Fixes: c1cf79ca ("drm/amdgpu: use IP discovery table for renoir") Signed-off-by:
Dirk Gouders <dirk@gouders.net> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: Evan Quan <evan.quan@amd.com> Signed-off-by:
-
- 01 Oct, 2020 6 commits
-
-
Alex Deucher authored
We need to schedule the smu AC/DC interrupt ack to avoid potentially sleeping if the smu message mutex is contended. Fixes: e1188aac ("drm/amdgpu/smu11: add support for SMU AC/DC interrupts") Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Alex Deucher authored
So we can schedule work from interrupts. This might include long tasks or things that could sleep. Fixes: e1188aac ("drm/amdgpu/smu11: add support for SMU AC/DC interrupts") Reviewed-by:
-
Hawking Zhang authored
add mp0 11_0_11 for navy_flounder to the mem training supported list, otherwise the modeprobe would fail on navy_flounder with latest vbios. Signed-off-by:
-
Hawking Zhang authored
support both direct and indirect accessor in unified helper functions. v2: Retire indirect mmio access via mm_index/data Signed-off-by:
Kevin Wang <kevin1.wang@amd.com> Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Signed-off-by:
-
Hawking Zhang authored
Switch WREG32/RREG32_PCIE to use indirect reg access helper for soc15 and onwards Signed-off-by:
-
Hawking Zhang authored
Add helper function in order to remove RREG32/WREG32 in current pcie_rreg/wreg function for soc15 and onwards adapters. PCIE_INDEX/DATA pairs are used to access regsiters outside of mmio bar in the helper functions. The new helper functions help remove the recursion of amdgpu_mm_rreg/wreg from pcie_rreg/wreg and provide the oppotunity to centralize direct and indirect access in a single function. v2: Fixed typo and refine the comments v3: Remove unnecessary volatile local variable Signed-off-by:
-
- 30 Sep, 2020 8 commits
-
-
Ramesh Errabolu authored
compute units that are in use. [Why] Allow user to know how many compute units (CU) are in use at any given moment. [How] Surface files in Sysfs that allow user to determine the number of compute units that are in use for a given process. One Sysfs file is used per device. Signed-off-by:
Ramesh Errabolu <Ramesh.Errabolu@amd.com> Reviewed-By:
Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by:
-
Ramesh Errabolu authored
waves that are in flight. [Why] Allow user to know how many compute units (CU) are in use at any given moment. [How] Read registers of SQ that give number of waves that are in flight of various queues. Use this information to determine number of CU's in use. Signed-off-by:
-
Jiansong Chen authored
gfxoff is temporarily disabled for navy_flounder, since at present the feature caused some tdr when performing display operations. Signed-off-by:
Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
-
Guchun Chen authored
The same ECC check has been executed in amdgpu_ras_init for vega10, prior to gmc_v9_0_late_init. v2: drop all atombios helper callings v3: use bit operation v4: correct inline comment, remove parity check statement v5: squash in build fix Signed-off-by:
-
Dmytro Laktyushkin authored
Add code to gracefuly handle any pipe reassignment occuring on dcn3 hardware. This should only happen when new surfaces are used for an update rather than old ones updated. Fixes: 69fc1f4b ("amd/drm/display: avoid dcn3 on flip opp change for slave pipes") Signed-off-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by:
-
Oak Zeng authored
gfxhub functions are now called from function pointers, instead of from asic-specific functions. Signed-off-by:
Oak Zeng <Oak.Zeng@amd.com> Reviewed-by:
-
Ramesh Errabolu authored
[Why] Allow user to know number of compute units (CU) that are in use at any given moment. [How] Read registers of SQ that give number of waves that are in flight of various queues. Use this information to determine number of CU's in use. Signed-off-by:
-
Ramesh Errabolu authored
[Why] Header file exports functions get_gpu_clock_counter(), get_cu_info() and select_se_sh() that are defined to be static Signed-off-by:
-
- 29 Sep, 2020 19 commits
-
-
Kent Russell authored
The VG20 DIDs 66a0, 66a1 and 66a4 are used for various SKUs that may or may not have the FRU EEPROM on it. Parse the VBIOS to check for server SKU variants (D131 or D134) until a more general solution can be determined. v2: Remove string-based logic, correct the VBIOS string comment Signed-off-by:
Kent Russell <kent.russell@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Alex Deucher authored
The state array is in the reverse order compared to other asics (high to low rather than low to high). Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1313Reviewed-by:
Prike Liang <Prike.Liang@amd.com> Signed-off-by:
-
Dirk Gouders authored
Commit 78fe9f63 ("drm/amd/display: Remove DISPCLK Limit Floor for Certain SMU Versions") added a call to rn_vbios_smu_get_smu_version() to set clk_mgr->smu_ver. That field is initialized prior to the if-statement, already. Fixes: 78fe9f63 (drm/amd/display: Remove DISPCLK Limit Floor for Certain SMU Versions) Signed-off-by:
-
Xiaojian Du authored
drm/amd/powerplay: add one sysfs file to support the feature to modify gfx clock on Raven/Raven2/Picasso APU. This patch is to add one sysfs file -- "pp_od_clk_voltage" for Raven/Raven2/Picasso APU, which is only used by dGPU like VEGA10. This sysfs file supports the feature to modify gfx engine clock(Mhz units), it can be used to configure the min value and the max value for gfx clock limited in the safe range. Command guide: echo "s level clock" > pp_od_clk_voltage s - adjust teh sclk level level - 0 or 1, "0" represents the min value, "1" represents the max value clock - the clock value(Mhz units), like 400, 800 or 1200, the value must be within the OD_RANGE limits. Example: $ cat pp_od_clk_voltage OD_SCLK: 0: 200Mhz 1: 1400Mhz OD_RANGE: SCLK: 200MHz 1400MHz $ echo "s 0 600" > pp_od_clk_voltage $ echo "s 1 1000" > pp_od_clk_voltage $ cat pp_od_clk_voltage OD_SCLK: 0: 600Mhz 1: 1000Mhz OD_RANGE: SCLK: 200MHz 1400MHz Signed-off-by:Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Shashank Sharma authored
This patch adds a new trace event to track the PTE update events. This specific event will provide information like: - start and end of virtual memory mapping - HW engine flags for the map - physical address for mapping This will be particularly useful for memory profiling tools (like RMV) which are monitoring the page table update events. V2: Added physical address lookup logic in trace point V3: switch to use __dynamic_array added nptes int the TPprint arguments list added page size in the arg list V4: Addressed Christian's review comments add start/end instead of seg use incr instead of page_sz to be accurate V5: Addressed Christian's review comments: add pid and vm context information in the event V6: Re-sequence the variables (put pid and ctx_id first) Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:Shashank Sharma <shashank.sharma@amd.com> Reviewed-by:
-
Guchun Chen authored
It should be one copy-paste typo. Signed-off-by:
-
Jean Delvare authored
A recent attempt to fix a ref count leak in amdgpu_display_crtc_set_config() turned out to be doing too much and "fixed" an intended decrease as if it were a leak. Undo that part to restore the proper balance. This is the very nature of this function to increase or decrease the power reference count depending on the situation. Consequences of this bug is that the power reference would eventually get down to 0 while the display was still in use, resulting in that display switching off unexpectedly. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Fixes: e008fa6f ("drm/amdgpu: fix ref count leak in amdgpu_display_crtc_set_config") Cc: stable@vger.kernel.org Cc: Navid Emamdoost <navid.emamdoost@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Jason Yan authored
This addresses the following sparse warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:2740:6: warning: symbol 'dce110_set_cursor_position' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:2785:6: warning: symbol 'dce110_set_cursor_attribute' was not declared. Should it be static? Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
-
Jason Yan authored
This addresses the following sparse warning: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_hw_sequencer.c:180:26: warning: symbol 'get_color_space_type' was not declared. Should it be static? Reviewed-by:
-
Dmytro Laktyushkin authored
At the moment on flip opp reassignment does not work in all cases for non root pipes. This change simply makes sure we prefer pipes not used previously when splitting in dcn3. Signed-off-by:
Eric Bernstein <eric.bernstein@amd.com> Signed-off-by:
-
Chiawen Huang authored
[Why] Vbios uses preferred timing to turn on edp but OS could use other timing. If change pixel clock when link active, there is unexpected garbage on monitor. [How] Once pixel clock changed, the driver needs to disable stream. Signed-off-by:
Chiawen Huang <chiawen.huang@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Acked-by:
-
Anthony Koo authored
[Header Changes] - Definition for retaining ABM settings during disable - Addition of some new AUX interface definitions - Addition of some outbox definitions Signed-off-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
-
Aric Cyr authored
Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Acked-by:
-
Wesley Chalmers authored
[WHY] At the moment, some tests are failing because cur_link_settings is invalid. As a workaround, add an option to force dio disable. Signed-off-by:
Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by:
Martin Leung <Martin.Leung@amd.com> Acked-by:
-
Joshua Aberback authored
[Why] Currently, when full p-state changes are not supported, DLG parameters are calculated for no p-state support at all. However, we are required to always support dummy p-state changes, so we should instead calculate DLG based on dummy p-state latency when full p-state is unsupported. This behaviour already exists for DCN2. [How] - move DLG calculation inside WM calculation - if p-state unsupported, do not recalculate for set A, instead copy from set C, and perform DLG calculation with dummy p-state latency Signed-off-by:
Joshua Aberback <joshua.aberback@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
-
Chiawen Huang authored
[Why] Vbios uses preferred timing to turn on edp but OS could use other timing. If change pixel clock when link active, there is unexpected garbage on monitor. [How] Once pixel clock changed, the driver needs to disable stream. Signed-off-by:
-
Wyatt Wood authored
[Why] Some debug bits are not being copied from driver to fw. [How] Copy debug bits properly. Signed-off-by:
Wyatt Wood <wyatt.wood@amd.com> Reviewed-by:
-
Eric Bernstein authored
Signed-off-by:
-
Alvin Lee authored
[Why] HW team measurement requires updating values [How] Update bounding box values Signed-off-by:
Alvin Lee <alvin.lee2@amd.com> Reviewed-by:
-
- 25 Sep, 2020 3 commits
-
-
Evan Quan authored
Revert the guilty change introduced by the commit below: drm/amd/pm: postpone SOCCLK/UCLK enablement after DAL initialization(V2) Signed-off-by:
Evan Quan <evan.quan@amd.com> Acked-by:
-
Alex Deucher authored
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c: In function ‘amdgpu_ras_fs_init’: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1284:2: warning: ignoring return value of ‘sysfs_create_group’, declared with attribute warn_unused_result [-Wunused-result] 1284 | sysfs_create_group(&adev->dev->kobj, &group); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ v2: just print an error for sysfs group creation failure Acked-by:Nirmoy Das <nirmoy.das@amd.com> Reviewed-by:
Luben Tuikov <luben.tuikov@amd.com> Signed-off-by:
-
Guchun Chen authored
Merge ras sysfs creation together by calling sysfs_create_group once, as sysfs_update_group may not work properly as expected. v2: improve commit message Signed-off-by:
Dennis Li <Dennis.Li@amd.com> Signed-off-by:
-
