- 26 Sep, 2012 36 commits
-
-
H Hartley Sweeten authored
This variable is never used in the driver. Just remove it. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
This variable is never used in the driver. Just remove it. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
IsBoardRevA is not defined in the driver. Remove the comment about it. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Until it's determined if this workaround can be removed, block out the code with an #if 0/#endif and remove the individual comments on each line. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
This variable is only used to count the number of dma buffers allocated during the attach. If an allocation fails, the attach function exits with -ENOMEM. When this variable is checked later it will always be == 2. Just remove the variable and the check. This allows bringing the code back an indent level in s626_initialize(). Note, coding style issues in this function are not addressed yet. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Add a simple dev_info() message after a successfull attach. Change the final return to '0' to indicate success. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
The private data is kzalloc'ed. All the variables in it are initially '0'. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
To make the attach a bit cleaner, factor the board init code out of attach_pci() into a new function. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Only set dev->irq if request_irq is successfull. Remove the kernel message noise. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
To make the attach a bit cleaner, factor the dma buffer allocation out of attach_pci() into a new function. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
'devpriv->base_addr' is valid from this point on in the attach_pci() function. Remove the unnecessary checks. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
The local variable 'resourceStart' is only used in the ioremap() to hold the PCI bar 0 base address. Just use the pci_resource_start() directly in the ioremap(). Also, instead of assuming the resource size for the ioremap, use pci_resource_len() to get the actual size. Remove the kernel noise when the ioremap fails and change the error code from -ENODEV to -ENOMEM. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
This variable is only used as a flag to indicate that the pci device has been enabled and needs to be disabled in the detach. Use the comedi_device 'iobase' for this and remove the private data variable. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
The 'result' variable is only used to check the return from comedi_pci_enable(). Just reuse the 'ret' variable. Also, remove the kernel noise and use the error code from comedi_pci_enable() instead of returning -ENODEV. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Instead of the literal string "s626", use the dev->board_name for the resource name when enabling the PCI device and requesting the irq. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Convert this PCI driver to use the comedi PCI auto config attach mechanism by adding an 'attach_pci' callback function. Since the driver does not require any external configuration options, and the legacy 'attach' callback is not optional, remove it. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
This driver only supports one board type. Move the used board info out of the boardinfo struct and remove it. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ian Abbott authored
Add subdevice 1 as an analog input (AI) subdevice. It currently only supports basic, software-triggered acquisitions. This is mostly the work of Fred Brooks (MODULE_AUTHOR), but he based his update on an older version of the driver. I applied the relevant changes with a few tweaks: adding an explicit `udelay(1)` in a timeout loop, replacing binary constants with hex, renaming functions, replacing `printk()` calls, removing exported symbols, removing (very) incomplete comedi "command" support, and making some coding-style changes. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ian Abbott authored
Rename `subdev_700_insn()` to `daq700_dio_insn_bits()` and `subdev_700_insn_config()` to `daq700_dio_insn_config()`. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ian Abbott authored
Rename a few functions and variables to use the prefix `daq700` instead of the prefix or suffix `dio700`. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kevin McKinney authored
This patch removes typedef for _stCPacketClassificationRuleSI, changes the name of the struct to bcm_packet_class_rules, and updates the comments appropriately . In addition, any calls to typedefs "CCPacketClassificationRuleSI, stCPacketClassificationRuleSI, or *pstCPacketClassificationRuleSI" are changed to call the struct directly. Signed-off-by:
Kevin McKinney <klmckinney1@gmail.com> Acked-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kevin McKinney authored
This patch removes typedef for _stPhsRuleSI, changes the name of the struct to bcm_phs_rules, and updates the comments appropriately. In addition, any calls to typedefs "stPhsRuleSI, *pstPhsRuleSI, or CPhsRuleSI" are changed to call the struct directly. Signed-off-by:
Kevin McKinney <klmckinney1@gmail.com> Acked-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kevin McKinney authored
This patch removes typedef for _stConvergenceSLTypes, changes the name of the struct to bcm_convergence_types, and updates the comments appropriately. In addition, any calls to typedefs "stConvergenceSLTypes, CConvergenceSLTypes, and *pstConvergenceSLTypes" are changed to call the struct directly. Signed-off-by:
Kevin McKinney <klmckinney1@gmail.com> Acked-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kevin McKinney authored
This patch removes typedef for _stServiceFlowParamSI, changes the name of the struct to bcm_connect_mgr_params, and updates the comments appropriately. In addition, any calls to typedefs "stServiceFlowParamSI, *pstServiceFlowParamSI, and CServiceFlowParamSI" are changed to call the struct directly. Signed-off-by:
Kevin McKinney <klmckinney1@gmail.com> Acked-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kevin McKinney authored
This patch removes typedef for _stLocalSFAddRequest, and changes the name of the struct to bcm_add_request. In addition, any calls to typedefs "stLocalSFAddRequest or *pstLocalSFAddRequest" are changed to call the struct directly. Signed-off-by:
Kevin McKinney <klmckinney1@gmail.com> Acked-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kevin McKinney authored
This patch removes typedef for _stLocalSFAddIndication, and changes the name of the struct to bcm_add_indication. In addition, any calls to typedefs "stLocalSFAddIndication, *pstLocalSFAddIndication, stLocalSFChangeRequest, *pstLocalSFChangeRequest, stLocalSFChangeIndication, or *pstLocalSFChangeIndication " are changed to call the struct directly. Signed-off-by:
Kevin McKinney <klmckinney1@gmail.com> Acked-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kevin McKinney authored
This patch removes typedef for _stLocalSFDeleteRequest, and changes the name of the struct to bcm_del_request. In addition, any calls to typedefs "stLocalSFDeleteRequest or *pstLocalSFDeleteRequest" are changed to call the struct directly. Signed-off-by:
Kevin McKinney <klmckinney1@gmail.com> Acked-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kevin McKinney authored
This patch removes typedef for stLocalSFDeleteIndication, and changes the name of the struct to bcm_del_indication. In addition, any calls to the following typedef "stLocalSFDeleteIndication" are changed to call the struct directly. Signed-off-by:
Kevin McKinney <klmckinney1@gmail.com> Acked-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Devendra Naga authored
fixes the following errors: drivers/staging/rtl8712/rtl871x_security.c:61: ERROR: "foo * bar" should be "foo *bar" drivers/staging/rtl8712/rtl871x_security.c:291: ERROR: "foo * bar" should be "foo *bar" drivers/staging/rtl8712/rtl871x_security.c:323: ERROR: "foo * bar" should be "foo *bar" drivers/staging/rtl8712/rtl871x_security.c:1371: ERROR: "(foo*)" should be "(foo *)" Signed-off-by:
Devendra Naga <devendra.aaru@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Devendra Naga authored
fixes the following error: drivers/staging/rtl8712/rtl8712_xmit.c:379: ERROR: "foo * bar" should be "foo *bar" Signed-off-by:
Devendra Naga <devendra.aaru@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Devendra Naga authored
fixes the following checkpatch warning: drivers/staging/rtl8712/os_intfs.c:99: ERROR: do not initialise statics to 0 or NULL as statics are always initialised to 0. Signed-off-by:
Devendra Naga <devendra.aaru@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
If we don't fill the whole buffer then there is information leaked to the user. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Justin P. Mattock authored
Signed-off-by:
Justin P. Mattock <justinmattock@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Harsh Kumar authored
checkpatch cleanup: Removed some undesired spaces, lines and tabs to comply with coding style. Signed-off-by:
Harsh Kumar <harsh1kumar@gmail.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Harsh Kumar authored
checkpatch cleanup: Changed c99 comments to c89 comments Signed-off-by:
Harsh Kumar <harsh1kumar@gmail.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 25 Sep, 2012 3 commits
-
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-v3.7e' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Fifth round of new drivers and device support for the IIO subsystem in the 3.7 cycle. Here we have a mixed bag of new stuff, minor fixes and more major fixes for drivers added earlier in this cycle. 1) A number of fixes for the HID sensors code added in previous pull request. Typical stuff that has become apparent as more eyes have looked at the code post merging. Similar case for the ad5755 dac. 2) Cleanups of error handing in inkern.c - again typical stuff to see as code comes into heavier use and people notice the naughty short cuts that snuck in originally and kindly fix them. 3) A series from Lars that removes some incorrect error handling from the remove functions of a number of drivers. These have been there for a very long time hence I'm not pushing these out for the 3.6 cycle. 4) Support for more parts in the ad7780 driver. 5) A driver for the adcs on the lp8788 power management unit 6) A client driver for IIO to allow it's ADCs to be used for battery status measurement. Note this driver has some dependencies on some utility functions added to IIO in this series, hence it is coming via this tree rather than Anton's. 7) A null pointer dereference bug in the 'fake' driver. I'm not doing this as a fix for the 3.6 cycle because it only effects 'fake' hardware and that code is typically only used by people investigating how IIO works as part of writing new drivers. Hence it's hardly a critical fix.
-
Harsh Kumar authored
Removed an unused macro. Plus, couple of grammatical and coding style fixes. 1) The macro _INLINE is not used anywhere. Anyways __inline is not portable. 2) Changed comment from "Not use" to "Unused" make it grammatically correct and to fit in 80 word limit. 3.) Removed space after * Signed-off-by:
Harsh Kumar <harsh1kumar@gmail.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexey Khoroshilov authored
t3e3_init_channel() incorrectly handles errors in several places: it returns zero and does not deallocate all required resources. The patch fixes that places. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 22 Sep, 2012 1 commit
-
-
Lars-Peter Clausen authored
If the config contains CONFIG_IIO_BUFFER=y and CONFIG_IIO_SIMPLE_DUMMY_BUFFER=n iio_simple_dummy_configure_buffer() is stubbed out and iio_buffer_register() is not. As a result we try to register a buffer which has not been configured. This will causes a NULL pointer deref in iio_buffer_register. To solve this issue move the iio_buffer_register() call to iio_simple_dummy_configure_buffer(), so it will only be called if iio_simple_dummy_configure_buffer() has been called. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-