- 06 Aug, 2014 40 commits
-
-
Sven Wegener authored
commit 8142b215 upstream. Commit 554086d8 ("x86_32, entry: Do syscall exit work on badsys (CVE-2014-4508)") introduced a regression in the x86_32 syscall entry code, resulting in syscall() not returning proper errors for undefined syscalls on CPUs supporting the sysenter feature. The following code: > int result = syscall(666); > printf("result=%d errno=%d error=%s\n", result, errno, strerror(errno)); results in: > result=666 errno=0 error=Success Obviously, the syscall return value is the called syscall number, but it should have been an ENOSYS error. When run under ptrace it behaves correctly, which makes it hard to debug in the wild: > result=-1 errno=38 error=Function not implemented The %eax register is the return value register. For debugging via ptrace the syscall entry code stores the complete register context on the stack. The badsys handlers only store the ENOSYS error code in the ptrace register set and do not set %eax like a regular syscall handler would. The old resume_userspace call chain contains code that clobbers %eax and it restores %eax from the ptrace registers afterwards. The same goes for the ptrace-enabled call chain. When ptrace is not used, the syscall return value is the passed-in syscall number from the untouched %eax register. Use %eax as the return value register in syscall_badsys and sysenter_badsys, like a real syscall handler does, and have the caller push the value onto the stack for ptrace access. Signed-off-by:
Sven Wegener <sven.wegener@stealer.net> Link: http://lkml.kernel.org/r/alpine.LNX.2.11.1407221022380.31021@titan.int.lan.stealer.netReviewed-and-tested-by:
Andy Lutomirski <luto@amacapital.net> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Tejun Heo authored
commit 1a112d10 upstream. 1871ee13 ("libata: support the ata host which implements a queue depth less than 32") directly used ata_port->scsi_host->can_queue from ata_qc_new() to determine the number of tags supported by the host; unfortunately, SAS controllers doing SATA don't initialize ->scsi_host leading to the following oops. BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 IP: [<ffffffff814e0618>] ata_qc_new_init+0x188/0x1b0 PGD 0 Oops: 0002 [#1] SMP Modules linked in: isci libsas scsi_transport_sas mgag200 drm_kms_helper ttm CPU: 1 PID: 518 Comm: udevd Not tainted 3.16.0-rc6+ #62 Hardware name: Intel Corporation S2600CO/S2600CO, BIOS SE5C600.86B.02.02.0002.122320131210 12/23/2013 task: ffff880c1a00b280 ti: ffff88061a000000 task.ti: ffff88061a000000 RIP: 0010:[<ffffffff814e0618>] [<ffffffff814e0618>] ata_qc_new_init+0x188/0x1b0 RSP: 0018:ffff88061a003ae8 EFLAGS: 00010012 RAX: 0000000000000001 RBX: ffff88000241ca80 RCX: 00000000000000fa RDX: 0000000000000020 RSI: 0000000000000020 RDI: ffff8806194aa298 RBP: ffff88061a003ae8 R08: ffff8806194a8000 R09: 0000000000000000 R10: 0000000000000000 R11: ffff88000241ca80 R12: ffff88061ad58200 R13: ffff8806194aa298 R14: ffffffff814e67a0 R15: ffff8806194a8000 FS: 00007f3ad7fe3840(0000) GS:ffff880627620000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 000000061a118000 CR4: 00000000001407e0 Stack: ffff88061a003b20 ffffffff814e96e1 ffff88000241ca80 ffff88061ad58200 ffff8800b6bf6000 ffff880c1c988000 ffff880619903850 ffff88061a003b68 ffffffffa0056ce1 ffff88061a003b48 0000000013d6e6f8 ffff88000241ca80 Call Trace: [<ffffffff814e96e1>] ata_sas_queuecmd+0xa1/0x430 [<ffffffffa0056ce1>] sas_queuecommand+0x191/0x220 [libsas] [<ffffffff8149afee>] scsi_dispatch_cmd+0x10e/0x300 [<ffffffff814a3bc5>] scsi_request_fn+0x2f5/0x550 [<ffffffff81317613>] __blk_run_queue+0x33/0x40 [<ffffffff8131781a>] queue_unplugged+0x2a/0x90 [<ffffffff8131ceb4>] blk_flush_plug_list+0x1b4/0x210 [<ffffffff8131d274>] blk_finish_plug+0x14/0x50 [<ffffffff8117eaa8>] __do_page_cache_readahead+0x198/0x1f0 [<ffffffff8117ee21>] force_page_cache_readahead+0x31/0x50 [<ffffffff8117ee7e>] page_cache_sync_readahead+0x3e/0x50 [<ffffffff81172ac6>] generic_file_read_iter+0x496/0x5a0 [<ffffffff81219897>] blkdev_read_iter+0x37/0x40 [<ffffffff811e307e>] new_sync_read+0x7e/0xb0 [<ffffffff811e3734>] vfs_read+0x94/0x170 [<ffffffff811e43c6>] SyS_read+0x46/0xb0 [<ffffffff811e33d1>] ? SyS_lseek+0x91/0xb0 [<ffffffff8171ee29>] system_call_fastpath+0x16/0x1b Code: 00 00 00 88 50 29 83 7f 08 01 19 d2 83 e2 f0 83 ea 50 88 50 34 c6 81 1d 02 00 00 40 c6 81 17 02 00 00 00 5d c3 66 0f 1f 44 00 00 <89> 14 25 58 00 00 00 Fix it by introducing ata_host->n_tags which is initialized to ATA_MAX_QUEUE - 1 in ata_host_init() for SAS controllers and set to scsi_host_template->can_queue in ata_host_register() for !SAS ones. As SAS hosts are never registered, this will give them the same ATA_MAX_QUEUE - 1 as before. Note that we can't use scsi_host->can_queue directly for SAS hosts anyway as they can go higher than the libata maximum. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Mike Qiu <qiudayu@linux.vnet.ibm.com> Reported-by:
Jesse Brandeburg <jesse.brandeburg@gmail.com> Reported-by:
Peter Hurley <peter@hurleysoftware.com> Reported-by:
Peter Zijlstra <peterz@infradead.org> Tested-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Fixes: 1871ee13 ("libata: support the ata host which implements a queue depth less than 32") Cc: Kevin Hao <haokexin@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Kevin Hao authored
commit 1871ee13 upstream. The sata on fsl mpc8315e is broken after the commit 8a4aeec8 ("libata/ahci: accommodate tag ordered controllers"). The reason is that the ata controller on this SoC only implement a queue depth of 16. When issuing the commands in tag order, all the commands in tag 16 ~ 31 are mapped to tag 0 unconditionally and then causes the sata malfunction. It makes no senses to use a 32 queue in software while the hardware has less queue depth. So consider the queue depth implemented by the hardware when requesting a command tag. Fixes: 8a4aeec8 ("libata/ahci: accommodate tag ordered controllers") Signed-off-by:
Kevin Hao <haokexin@gmail.com> Acked-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Catalin Marinas authored
commit 7f88f88f upstream. Commit 248ac0e1 ("mm/vmalloc: remove guard page from between vmap blocks") had the side effect of making vmap_area.va_end member point to the next vmap_area.va_start. This was creating an artificial reference to vmalloc'ed objects and kmemleak was rarely reporting vmalloc() leaks. This patch marks the vmap_area containing pointers explicitly and reduces the min ref_count to 2 as vm_struct still contains a reference to the vmalloc'ed object. The kmemleak add_scan_area() function has been improved to allow a SIZE_MAX argument covering the rest of the object (for simpler calling sites). Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Xi Wang authored
commit a3860c1c upstream. ULONG_MAX is often used to check for integer overflow when calculating allocation size. While ULONG_MAX happens to work on most systems, there is no guarantee that `size_t' must be the same size as `long'. This patch introduces SIZE_MAX, the maximum value of `size_t', to improve portability and readability for allocation size validation. Signed-off-by:
Xi Wang <xi.wang@gmail.com> Acked-by:
Alex Elder <elder@dreamhost.com> Cc: David Airlie <airlied@linux.ie> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Xi Wang authored
commit 80834312 upstream. The overflow check for a + n * b should be (n > (ULONG_MAX - a) / b), rather than (n > ULONG_MAX / b - a). Signed-off-by:
Sage Weil <sage@newdream.net> Signed-off-by:
-
Nicolas Pitre authored
commit 418df63a upstream. Commit 455bd4c4 ("ARM: 7668/1: fix memset-related crashes caused by recent GCC (4.7.2) optimizations") attempted to fix a compliance issue with the memset return value. However the memset itself became broken by that patch for misaligned pointers. This fixes the above by branching over the entry code from the misaligned fixup code to avoid reloading the original pointer. Also, because the function entry alignment is wrong in the Thumb mode compilation, that fixup code is moved to the end. While at it, the entry instructions are slightly reworked to help dual issue pipelines. Signed-off-by:
Nicolas Pitre <nico@linaro.org> Tested-by:
Alexander Holler <holler@ahsoftware.de> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Ivan Djelic authored
commit 455bd4c4 upstream. Recent GCC versions (e.g. GCC-4.7.2) perform optimizations based on assumptions about the implementation of memset and similar functions. The current ARM optimized memset code does not return the value of its first argument, as is usually expected from standard implementations. For instance in the following function: void debug_mutex_lock_common(struct mutex *lock, struct mutex_waiter *waiter) { memset(waiter, MUTEX_DEBUG_INIT, sizeof(*waiter)); waiter->magic = waiter; INIT_LIST_HEAD(&waiter->list); } compiled as: 800554d0 <debug_mutex_lock_common>: 800554d0: e92d4008 push {r3, lr} 800554d4: e1a00001 mov r0, r1 800554d8: e3a02010 mov r2, #16 ; 0x10 800554dc: e3a01011 mov r1, #17 ; 0x11 800554e0: eb04426e bl 80165ea0 <memset> 800554e4: e1a03000 mov r3, r0 800554e8: e583000c str r0, [r3, #12] 800554ec: e5830000 str r0, [r3] 800554f0: e5830004 str r0, [r3, #4] 800554f4: e8bd8008 pop {r3, pc} GCC assumes memset returns the value of pointer 'waiter' in register r0; causing register/memory corruptions. This patch fixes the return value of the assembly version of memset. It adds a 'mov' instruction and merges an additional load+store into existing load/store instructions. For ease of review, here is a breakdown of the patch into 4 simple steps: Step 1 ====== Perform the following substitutions: ip -> r8, then r0 -> ip, and insert 'mov ip, r0' as the first statement of the function. At this point, we have a memset() implementation returning the proper result, but corrupting r8 on some paths (the ones that were using ip). Step 2 ====== Make sure r8 is saved and restored when (! CALGN(1)+0) == 1: save r8: - str lr, [sp, #-4]! + stmfd sp!, {r8, lr} and restore r8 on both exit paths: - ldmeqfd sp!, {pc} @ Now <64 bytes to go. + ldmeqfd sp!, {r8, pc} @ Now <64 bytes to go. (...) tst r2, #16 stmneia ip!, {r1, r3, r8, lr} - ldr lr, [sp], #4 + ldmfd sp!, {r8, lr} Step 3 ====== Make sure r8 is saved and restored when (! CALGN(1)+0) == 0: save r8: - stmfd sp!, {r4-r7, lr} + stmfd sp!, {r4-r8, lr} and restore r8 on both exit paths: bgt 3b - ldmeqfd sp!, {r4-r7, pc} + ldmeqfd sp!, {r4-r8, pc} (...) tst r2, #16 stmneia ip!, {r4-r7} - ldmfd sp!, {r4-r7, lr} + ldmfd sp!, {r4-r8, lr} Step 4 ====== Rewrite register list "r4-r7, r8" as "r4-r8". Signed-off-by:
Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by:
Dirk Behme <dirk.behme@gmail.com> Signed-off-by:
-
Naoya Horiguchi authored
commit 0253d634 upstream. Commit 4a705fef ("hugetlb: fix copy_hugetlb_page_range() to handle migration/hwpoisoned entry") changed the order of huge_ptep_set_wrprotect() and huge_ptep_get(), which leads to breakage in some workloads like hugepage-backed heap allocation via libhugetlbfs. This patch fixes it. The test program for the problem is shown below: $ cat heap.c #include <unistd.h> #include <stdlib.h> #include <string.h> #define HPS 0x200000 int main() { int i; char *p = malloc(HPS); memset(p, '1', HPS); for (i = 0; i < 5; i++) { if (!fork()) { memset(p, '2', HPS); p = malloc(HPS); memset(p, '3', HPS); free(p); return 0; } } sleep(1); free(p); return 0; } $ export HUGETLB_MORECORE=yes ; export HUGETLB_NO_PREFAULT= ; hugectl --heap ./heap Fixes 4a705fef ("hugetlb: fix copy_hugetlb_page_range() to handle migration/hwpoisoned entry"), so is applicable to -stable kernels which include it. Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reported-by:
Guillaume Morin <guillaume@morinfr.org> Suggested-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
Markus F.X.J. Oberhumer authored
commit 0ec73820 upstream. Update the LZO compression test vectors according to the latest compressor version. Signed-off-by:
Markus F.X.J. Oberhumer <markus@oberhumer.com> Signed-off-by:
-
Julian Anastasov authored
[ Upstream commit 9802d21e ] The tot_stats estimator is started only when CONFIG_SYSCTL is defined. But it is stopped without checking CONFIG_SYSCTL. Fix the crash by moving ip_vs_stop_estimator into ip_vs_control_net_cleanup_sysctl. The change is needed after commit 14e40546 ("IPVS: Add __ip_vs_control_{init,cleanup}_sysctl()") from 2.6.39. Reported-by:
Jet Chen <jet.chen@intel.com> Tested-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Roland Dreier authored
commit c81c8a1e upstream. In __ioremap_caller() (the guts of ioremap), we loop over the range of pfns being remapped and checks each one individually with page_is_ram(). For large ioremaps, this can be very slow. For example, we have a device with a 256 GiB PCI BAR, and ioremapping this BAR can take 20+ seconds -- sometimes long enough to trigger the soft lockup detector! Internally, page_is_ram() calls walk_system_ram_range() on a single page. Instead, we can make a single call to walk_system_ram_range() from __ioremap_caller(), and do our further checks only for any RAM pages that we find. For the common case of MMIO, this saves an enormous amount of work, since the range being ioremapped doesn't intersect system RAM at all. With this change, ioremap on our 256 GiB BAR takes less than 1 second. Signed-off-by:
Roland Dreier <roland@purestorage.com> Link: http://lkml.kernel.org/r/1399054721-1331-1-git-send-email-roland@kernel.orgSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Mikulas Patocka authored
commit fd1232b2 upstream. This patch fixes I/O errors with the sym53c8xx_2 driver when the disk returns QUEUE FULL status. When the controller encounters an error (including QUEUE FULL or BUSY status), it aborts all not yet submitted requests in the function sym_dequeue_from_squeue. This function aborts them with DID_SOFT_ERROR. If the disk has full tag queue, the request that caused the overflow is aborted with QUEUE FULL status (and the scsi midlayer properly retries it until it is accepted by the disk), but the sym53c8xx_2 driver aborts the following requests with DID_SOFT_ERROR --- for them, the midlayer does just a few retries and then signals the error up to sd. The result is that disk returning QUEUE FULL causes request failures. The error was reproduced on 53c895 with COMPAQ BD03685A24 disk (rebranded ST336607LC) with command queue 48 or 64 tags. The disk has 64 tags, but under some access patterns it return QUEUE FULL when there are less than 64 pending tags. The SCSI specification allows returning QUEUE FULL anytime and it is up to the host to retry. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: Matthew Wilcox <matthew@wil.cx> Cc: James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Dan Carpenter authored
commit 8bab797c upstream. This is a static checker fix. The "dev" variable is always NULL after the while statement so we would be dereferencing a NULL pointer here. Fixes: 819a3eba ('[PATCH] applicom: fix error handling') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
H. Peter Anvin authored
commit 246f2d2e upstream. It is not safe to use LAR to filter when to go down the espfix path, because the LDT is per-process (rather than per-thread) and another thread might change the descriptors behind our back. Fortunately it is always *safe* (if a bit slow) to go down the espfix path, and a 32-bit LDT stack segment is extremely rare. Signed-off-by:
-
Jiang Liu authored
commit ae49b83d upstream. Generate mandatory global variables _sdata in file vmlinux.lds. Signed-off-by:
Jiang Liu <jiang.liu@huawei.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Signed-off-by:
-
Michael Cree authored
commit 25534eb7 upstream. These functions are used in some PCI drivers with big-endian MMIO space. Admittedly it is almost certain that no one this side of the Moon would use such a card in an Alpha but it does get us closer to being able to build allyesconfig or allmodconfig, and it enables the Debian default generic config to build. Tested-by:
Raúl Porcel <armin76@gentoo.org> Signed-off-by:
Michael Cree <mcree@orcon.net.nz> Signed-off-by:
Matt Turner <mattst88@gmail.com> Signed-off-by:
-
Ben Hutchings authored
There is no upstream commit for this, as arch/score/kernel/init_task.c has been replaced by generic code and <linux/export.h> is included indirectly by arch/score/mm/init.c. Signed-off-by: -
Lennox Wu authored
Score: The commit is for compiling successfully. The modifications include: 1. Kconfig of Score: we don't support ioremap 2. Missed headfile including 3. There are some errors in other people's commit not checked by us, we fix it now 3.1 arch/score/kernel/entry.S: wrong instructions 3.2 arch/score/kernel/process.c : just some typos commit 5fbbf8a1 upstream. Signed-off-by:
Lennox Wu <lennox.wu@gmail.com> [bwh: Backported to 3.2: - Drop addition of 'select HAVE_GENERIC_HARDIRQS' which was not removed here - Drop inapplicale change to copy_thread()] Signed-off-by:
-
Fengguang Wu authored
commit 82e54a6a upstream. It's required for the core fs/namespace.c and many other basic features. Signed-off-by:
Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Guan Xuetao authored
commit a50e4213 upstream. Bugfix for following error messages: lib/iomap.c: In function 'pci_iomap': lib/iomap.c:274: error: implicit declaration of function 'ioremap_nocache' lib/iomap.c:274: warning: return makes pointer from integer without a cast Also see commit <f1ecc698> it will hide the ioremap_nocache function for systems with an MMU Signed-off-by:
-
Hugh Dickins authored
commit b1a36650 upstream. shmem_fault() is the actual culprit in trinity's hole-punch starvation, and the most significant cause of such problems: since a page faulted is one that then appears page_mapped(), needing unmap_mapping_range() and i_mmap_mutex to be unmapped again. But it is not the only way in which a page can be brought into a hole in the radix_tree while that hole is being punched; and Vlastimil's testing implies that if enough other processors are busy filling in the hole, then shmem_undo_range() can be kept from completing indefinitely. shmem_file_splice_read() is the main other user of SGP_CACHE, which can instantiate shmem pagecache pages in the read-only case (without holding i_mutex, so perhaps concurrently with a hole-punch). Probably it's silly not to use SGP_READ already (using the ZERO_PAGE for holes): which ought to be safe, but might bring surprises - not a change to be rushed. shmem_read_mapping_page_gfp() is an internal interface used by drivers/gpu/drm GEM (and next by uprobes): it should be okay. And shmem_file_read_iter() uses the SGP_DIRTY variant of SGP_CACHE, when called internally by the kernel (perhaps for a stacking filesystem, which might rely on holes to be reserved): it's unclear whether it could be provoked to keep hole-punch busy or not. We could apply the same umbrella as now used in shmem_fault() to shmem_file_splice_read() and the others; but it looks ugly, and use over a range raises questions - should it actually be per page? can these get starved themselves? The origin of this part of the problem is my v3.1 commit d0823576 ("mm: pincer in truncate_inode_pages_range"), once it was duplicated into shmem.c. It seemed like a nice idea at the time, to ensure (barring RCU lookup fuzziness) that there's an instant when the entire hole is empty; but the indefinitely repeated scans to ensure that make it vulnerable. Revert that "enhancement" to hole-punch from shmem_undo_range(), but retain the unproblematic rescanning when it's truncating; add a couple of comments there. Remove the "indices[0] >= end" test: that is now handled satisfactorily by the inner loop, and mem_cgroup_uncharge_start()/end() are too light to be worth avoiding here. But if we do not always loop indefinitely, we do need to handle the case of swap swizzled back to page before shmem_free_swap() gets it: add a retry for that case, as suggested by Konstantin Khlebnikov; and for the case of page swizzled back to swap, as suggested by Johannes Weiner. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Suggested-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Signed-off-by:
-
Hugh Dickins authored
commit 8e205f77 upstream. Commit f00cdc6d ("shmem: fix faulting into a hole while it's punched") was buggy: Sasha sent a lockdep report to remind us that grabbing i_mutex in the fault path is a no-no (write syscall may already hold i_mutex while faulting user buffer). We tried a completely different approach (see following patch) but that proved inadequate: good enough for a rational workload, but not good enough against trinity - which forks off so many mappings of the object that contention on i_mmap_mutex while hole-puncher holds i_mutex builds into serious starvation when concurrent faults force the puncher to fall back to single-page unmap_mapping_range() searches of the i_mmap tree. So return to the original umbrella approach, but keep away from i_mutex this time. We really don't want to bloat every shmem inode with a new mutex or completion, just to protect this unlikely case from trinity. So extend the original with wait_queue_head on stack at the hole-punch end, and wait_queue item on the stack at the fault end. This involves further use of i_lock to guard against the races: lockdep has been happy so far, and I see fs/inode.c:unlock_new_inode() holds i_lock around wake_up_bit(), which is comparable to what we do here. i_lock is more convenient, but we could switch to shmem's info->lock. This issue has been tagged with CVE-2014-4171, which will require commit f00cdc6d and this and the following patch to be backported: we suggest to 3.1+, though in fact the trinity forkbomb effect might go back as far as 2.6.16, when madvise(,,MADV_REMOVE) came in - or might not, since much has changed, with i_mmap_mutex a spinlock before 3.0. Anyone running trinity on 3.0 and earlier? I don't think we need care. Signed-off-by:
-
Hugh Dickins authored
commit f00cdc6d upstream. Trinity finds that mmap access to a hole while it's punched from shmem can prevent the madvise(MADV_REMOVE) or fallocate(FALLOC_FL_PUNCH_HOLE) from completing, until the reader chooses to stop; with the puncher's hold on i_mutex locking out all other writers until it can complete. It appears that the tmpfs fault path is too light in comparison with its hole-punching path, lacking an i_data_sem to obstruct it; but we don't want to slow down the common case. Extend shmem_fallocate()'s existing range notification mechanism, so shmem_fault() can refrain from faulting pages into the hole while it's punched, waiting instead on i_mutex (when safe to sleep; or repeatedly faulting when not). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Dave Chinner authored
commit e3a746f5 upstream. The current cursor is reallocated when retrying the allocation, so the existing cursor needs to be destroyed in both the restart and the failure cases. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Tested-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Ben Myers <bpm@sgi.com> Signed-off-by:
-
Dave Chinner authored
commit 76d09538 upstream. When we fail to find an matching extent near the requested extent specification during a left-right distance search in xfs_alloc_ag_vextent_near, we fail to free the original cursor that we used to look up the XFS_BTNUM_CNT tree and hence leak it. Reported-by:
Chris J Arges <chris.j.arges@canonical.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Mathias Krause authored
commit 278f2b3e upstream. The ulog messages leak heap bytes by the means of padding bytes and incompletely filled string arrays. Fix those by memset(0)'ing the whole struct before filling it. Signed-off-by:
Mathias Krause <minipli@googlemail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Martin Schwidefsky authored
commit dab6cf55 upstream. The PSW mask check of the PTRACE_POKEUSR_AREA command is incorrect. For the default user_mode=home address space layout the psw_user_bits variable has the home space address-space-control bits set. But the PSW_MASK_USER contains PSW_MASK_ASC, the ptrace validity check for the PSW mask will therefore always fail. Fixes CVE-2014-3534 Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Thomas Gleixner authored
commit 0e576acb upstream. If CONFIG_NO_HZ=n tick_nohz_get_sleep_length() returns NSEC_PER_SEC/HZ. If CONFIG_NO_HZ=y and the nohz functionality is disabled via the command line option "nohz=off" or not enabled due to missing hardware support, then tick_nohz_get_sleep_length() returns 0. That happens because ts->sleep_length is never set in that case. Set it to NSEC_PER_SEC/HZ when the NOHZ mode is inactive. Reported-by:
Michal Hocko <mhocko@suse.cz> Reported-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Michal Schmidt authored
commit e5eca6d4 upstream. When running RHEL6 userspace on a current upstream kernel, "ip link" fails to show VF information. The reason is a kernel<->userspace API change introduced by commit 88c5b5ce ("rtnetlink: Call nlmsg_parse() with correct header length"), after which the kernel does not see iproute2's IFLA_EXT_MASK attribute in the netlink request. iproute2 adjusted for the API change in its commit 63338dca4513 ("libnetlink: Use ifinfomsg instead of rtgenmsg in rtnl_wilddump_req_filter"). The problem has been noticed before: http://marc.info/?l=linux-netdev&m=136692296022182&w=2 (Subject: Re: getting VF link info seems to be broken in 3.9-rc8) We can do better than tell those with old userspace to upgrade. We can recognize the old iproute2 in the kernel by checking the netlink message length. Even when including the IFLA_EXT_MASK attribute, its netlink message is shorter than struct ifinfomsg. With this patch "ip link" shows VF information in both old and new iproute2 versions. Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 10ec9472 ] There is a benign buffer overflow in ip_options_compile spotted by AddressSanitizer[1] : Its benign because we always can access one extra byte in skb->head (because header is followed by struct skb_shared_info), and in this case this byte is not even used. [28504.910798] ================================================================== [28504.912046] AddressSanitizer: heap-buffer-overflow in ip_options_compile [28504.913170] Read of size 1 by thread T15843: [28504.914026] [<ffffffff81802f91>] ip_options_compile+0x121/0x9c0 [28504.915394] [<ffffffff81804a0d>] ip_options_get_from_user+0xad/0x120 [28504.916843] [<ffffffff8180dedf>] do_ip_setsockopt.isra.15+0x8df/0x1630 [28504.918175] [<ffffffff8180ec60>] ip_setsockopt+0x30/0xa0 [28504.919490] [<ffffffff8181e59b>] tcp_setsockopt+0x5b/0x90 [28504.920835] [<ffffffff8177462f>] sock_common_setsockopt+0x5f/0x70 [28504.922208] [<ffffffff817729c2>] SyS_setsockopt+0xa2/0x140 [28504.923459] [<ffffffff818cfb69>] system_call_fastpath+0x16/0x1b [28504.924722] [28504.925106] Allocated by thread T15843: [28504.925815] [<ffffffff81804995>] ip_options_get_from_user+0x35/0x120 [28504.926884] [<ffffffff8180dedf>] do_ip_setsockopt.isra.15+0x8df/0x1630 [28504.927975] [<ffffffff8180ec60>] ip_setsockopt+0x30/0xa0 [28504.929175] [<ffffffff8181e59b>] tcp_setsockopt+0x5b/0x90 [28504.930400] [<ffffffff8177462f>] sock_common_setsockopt+0x5f/0x70 [28504.931677] [<ffffffff817729c2>] SyS_setsockopt+0xa2/0x140 [28504.932851] [<ffffffff818cfb69>] system_call_fastpath+0x16/0x1b [28504.934018] [28504.934377] The buggy address ffff880026382828 is located 0 bytes to the right [28504.934377] of 40-byte region [ffff880026382800, ffff880026382828) [28504.937144] [28504.937474] Memory state around the buggy address: [28504.938430] ffff880026382300: ........ rrrrrrrr rrrrrrrr rrrrrrrr [28504.939884] ffff880026382400: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28504.941294] ffff880026382500: .....rrr rrrrrrrr rrrrrrrr rrrrrrrr [28504.942504] ffff880026382600: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28504.943483] ffff880026382700: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28504.944511] >ffff880026382800: .....rrr rrrrrrrr rrrrrrrr rrrrrrrr [28504.945573] ^ [28504.946277] ffff880026382900: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.094949] ffff880026382a00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.096114] ffff880026382b00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.097116] ffff880026382c00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.098472] ffff880026382d00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.099804] Legend: [28505.100269] f - 8 freed bytes [28505.100884] r - 8 redzone bytes [28505.101649] . - 8 allocated bytes [28505.102406] x=1..7 - x allocated bytes + (8-x) redzone bytes [28505.103637] ================================================================== [1] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernelSigned-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit 640d7efe ] *_result[len] is parsed as *(_result[len]) which is not at all what we want to touch here. Signed-off-by:
-
Manuel Schölling authored
[ Upstream commit 84a7c0b1 ] dns_query() credulously assumes that keys are null-terminated and returns a copy of a memory block that is off by one. Signed-off-by:
Manuel Schölling <manuel.schoelling@gmx.de> Signed-off-by:
-
Sowmini Varadhan authored
[ Upstream commit a4b70a07 ] Nothing cleans up the objects created by vnet_new(), they are completely leaked. vnet_exit(), after doing the vio_unregister_driver() to clean up ports, should call a helper function that iterates over vnet_list and cleans up those objects. This includes unregister_netdevice() as well as free_netdev(). Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Dave Kleikamp <dave.kleikamp@oracle.com> Reviewed-by:
Karl Volz <karl.volz@oracle.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 8f2e5ae4 ] While working on some other SCTP code, I noticed that some structures shared with user space are leaking uninitialized stack or heap buffer. In particular, struct sctp_sndrcvinfo has a 2 bytes hole between .sinfo_flags and .sinfo_ppid that remains unfilled by us in sctp_ulpevent_read_sndrcvinfo() when putting this into cmsg. But also struct sctp_remote_error contains a 2 bytes hole that we don't fill but place into a skb through skb_copy_expand() via sctp_ulpevent_make_remote_error(). Both structures are defined by the IETF in RFC6458: * Section 5.3.2. SCTP Header Information Structure: The sctp_sndrcvinfo structure is defined below: struct sctp_sndrcvinfo { uint16_t sinfo_stream; uint16_t sinfo_ssn; uint16_t sinfo_flags; <-- 2 bytes hole --> uint32_t sinfo_ppid; uint32_t sinfo_context; uint32_t sinfo_timetolive; uint32_t sinfo_tsn; uint32_t sinfo_cumtsn; sctp_assoc_t sinfo_assoc_id; }; * 6.1.3. SCTP_REMOTE_ERROR: A remote peer may send an Operation Error message to its peer. This message indicates a variety of error conditions on an association. The entire ERROR chunk as it appears on the wire is included in an SCTP_REMOTE_ERROR event. Please refer to the SCTP specification [RFC4960] and any extensions for a list of possible error formats. An SCTP error notification has the following format: struct sctp_remote_error { uint16_t sre_type; uint16_t sre_flags; uint32_t sre_length; uint16_t sre_error; <-- 2 bytes hole --> sctp_assoc_t sre_assoc_id; uint8_t sre_data[]; }; Fix this by setting both to 0 before filling them out. We also have other structures shared between user and kernel space in SCTP that contains holes (e.g. struct sctp_paddrthlds), but we copy that buffer over from user space first and thus don't need to care about it in that cases. While at it, we can also remove lengthy comments copied from the draft, instead, we update the comment with the correct RFC number where one can look it up. Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
Andrey Utkin authored
[ Upstream commit 36beddc2 ] Setting just skb->sk without taking its reference and setting a destructor is invalid. However, in the places where this was done, skb is used in a way not requiring skb->sk setting. So dropping the setting of skb->sk. Thanks to Eric Dumazet <eric.dumazet@gmail.com> for correct solution. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79441Reported-by:
Ed Martin <edman007@edman007.com> Signed-off-by:
Andrey Utkin <andrey.krieger.utkin@gmail.com> Signed-off-by:
-
dingtianhong authored
[ Upstream commit 52ad353a ] The problem was triggered by these steps: 1) create socket, bind and then setsockopt for add mc group. mreq.imr_multiaddr.s_addr = inet_addr("255.0.0.37"); mreq.imr_interface.s_addr = inet_addr("192.168.1.2"); setsockopt(sockfd, IPPROTO_IP, IP_ADD_MEMBERSHIP, &mreq, sizeof(mreq)); 2) drop the mc group for this socket. mreq.imr_multiaddr.s_addr = inet_addr("255.0.0.37"); mreq.imr_interface.s_addr = inet_addr("0.0.0.0"); setsockopt(sockfd, IPPROTO_IP, IP_DROP_MEMBERSHIP, &mreq, sizeof(mreq)); 3) and then drop the socket, I found the mc group was still used by the dev: netstat -g Interface RefCnt Group --------------- ------ --------------------- eth2 1 255.0.0.37 Normally even though the IP_DROP_MEMBERSHIP return error, the mc group still need to be released for the netdev when drop the socket, but this process was broken when route default is NULL, the reason is that: The ip_mc_leave_group() will choose the in_dev by the imr_interface.s_addr, if input addr is NULL, the default route dev will be chosen, then the ifindex is got from the dev, then polling the inet->mc_list and return -ENODEV, but if the default route dev is NULL, the in_dev and ifIndex is both NULL, when polling the inet->mc_list, the mc group will be released from the mc_list, but the dev didn't dec the refcnt for this mc group, so when dropping the socket, the mc_list is NULL and the dev still keep this group. v1->v2: According Hideaki's suggestion, we should align with IPv6 (RFC3493) and BSDs, so I add the checking for the in_dev before polling the mc_list, make sure when we remove the mc group, dec the refcnt to the real dev which was using the mc address. The problem would never happened again. Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> Signed-off-by:
-
Li RongQing authored
[ Upstream commit 916c1689 ] skb_cow called in vlan_reorder_header does not free the skb when it failed, and vlan_reorder_header returns NULL to reset original skb when it is called in vlan_untag, lead to a memory leak. Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Acked-by:
-
Neal Cardwell authored
[ Upstream commit 2cd0d743 ] If there is an MSS change (or misbehaving receiver) that causes a SACK to arrive that covers the end of an skb but is less than one MSS, then tcp_match_skb_to_sack() was rounding up pkt_len to the full length of the skb ("Round if necessary..."), then chopping all bytes off the skb and creating a zero-byte skb in the write queue. This was visible now because the recently simplified TLP logic in bef1909e ("tcp: fixing TLP's FIN recovery") could find that 0-byte skb at the end of the write queue, and now that we do not check that skb's length we could send it as a TLP probe. Consider the following example scenario: mss: 1000 skb: seq: 0 end_seq: 4000 len: 4000 SACK: start_seq: 3999 end_seq: 4000 The tcp_match_skb_to_sack() code will compute: in_sack = false pkt_len = start_seq - TCP_SKB_CB(skb)->seq = 3999 - 0 = 3999 new_len = (pkt_len / mss) * mss = (3999/1000)*1000 = 3000 new_len += mss = 4000 Previously we would find the new_len > skb->len check failing, so we would fall through and set pkt_len = new_len = 4000 and chop off pkt_len of 4000 from the 4000-byte skb, leaving a 0-byte segment afterward in the write queue. With this new commit, we notice that the new new_len >= skb->len check succeeds, so that we return without trying to fragment. Fixes: adb92db8 ("tcp: Make SACK code to split only at mss boundaries") Reported-by:
Neal Cardwell <ncardwell@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Ilpo Jarvinen <ilpo.jarvinen@helsinki.fi> Acked-by:
-
Gavin Guo authored
commit bb86cf56 upstream. When using USB 3.0 pen drive with the [AMD] FCH USB XHCI Controller [1022:7814], the second hotplugging will experience the USB 3.0 pen drive is recognized as high-speed device. After bisecting the kernel, I found the commit number 41e7e056 (USB: Allow USB 3.0 ports to be disabled.) causes the bug. After doing some experiments, the bug can be fixed by avoiding executing the function hub_usb3_port_disable(). Because the port status with [AMD] FCH USB XHCI Controlleris [1022:7814] is already in RxDetect (I tried printing out the port status before setting to Disabled state), it's reasonable to check the port status before really executing hub_usb3_port_disable(). Fixes: 41e7e056 (USB: Allow USB 3.0 ports to be disabled.) Signed-off-by:
Gavin Guo <gavin.guo@canonical.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
