1. 29 Feb, 2016 2 commits
  2. 25 Feb, 2016 1 commit
    • Harvey Hunt's avatar
      libata: Align ata_device's id on a cacheline · 4ee34ea3
      Harvey Hunt authored
      The id buffer in ata_device is a DMA target, but it isn't explicitly
      cacheline aligned. Due to this, adjacent fields can be overwritten with
      stale data from memory on non coherent architectures. As a result, the
      kernel is sometimes unable to communicate with an ATA device.
      
      Fix this by ensuring that the id buffer is cacheline aligned.
      
      This issue is similar to that fixed by Commit 84bda12a
      ("libata: align ap->sector_buf").
      Signed-off-by: default avatarHarvey Hunt <harvey.hunt@imgtec.com>
      Cc: linux-kernel@vger.kernel.org
      Cc: <stable@vger.kernel.org> # 2.6.18
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      4ee34ea3
  3. 18 Feb, 2016 2 commits
    • Alexandra Yates's avatar
      Adding Intel Lewisburg device IDs for SATA · f5bdd66c
      Alexandra Yates authored
      This patch complements the list of device IDs previously
      added for lewisburg sata.
      Signed-off-by: default avatarAlexandra Yates <alexandra.yates@linux.intel.com>
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Cc: stable@vger.kernel.org
      f5bdd66c
    • Gabor Juhos's avatar
      pata-rb532-cf: get rid of the irq_to_gpio() call · 01836176
      Gabor Juhos authored
      The RB532 platform specific irq_to_gpio() implementation has been
      removed with commit 832f5dac ("MIPS: Remove all the uses of
      custom gpio.h"). Now the platform uses the generic stub which causes
      the following error:
      
        pata-rb532-cf pata-rb532-cf: no GPIO found for irq149
        pata-rb532-cf: probe of pata-rb532-cf failed with error -2
      
      Drop the irq_to_gpio() call and get the GPIO number from platform
      data instead. After this change, the driver works again:
      
        scsi host0: pata-rb532-cf
        ata1: PATA max PIO4 irq 149
        ata1.00: CFA: CF 1GB, 20080820, max MWDMA4
        ata1.00: 1989792 sectors, multi 0: LBA
        ata1.00: configured for PIO4
        scsi 0:0:0:0: Direct-Access     ATA      CF 1GB           0820 PQ: 0\
        ANSI: 5
        sd 0:0:0:0: [sda] 1989792 512-byte logical blocks: (1.01 GB/971 MiB)
        sd 0:0:0:0: [sda] Write Protect is off
        sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't\
        support DPO or FUA
         sda: sda1 sda2
        sd 0:0:0:0: [sda] Attached SCSI disk
      
      Fixes: 832f5dac ("MIPS: Remove all the uses of custom gpio.h")
      Cc: Alban Bedel <albeu@free.fr>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: <stable@vger.kernel.org> #v4.3+
      Signed-off-by: default avatarGabor Juhos <juhosg@openwrt.org>
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      01836176
  4. 11 Feb, 2016 4 commits
    • Arnd Bergmann's avatar
      libata: fix HDIO_GET_32BIT ioctl · 287e6611
      Arnd Bergmann authored
      As reported by Soohoon Lee, the HDIO_GET_32BIT ioctl does not
      work correctly in compat mode with libata.
      
      I have investigated the issue further and found multiple problems
      that all appeared with the same commit that originally introduced
      HDIO_GET_32BIT handling in libata back in linux-2.6.8 and presumably
      also linux-2.4, as the code uses "copy_to_user(arg, &val, 1)" to copy
      a 'long' variable containing either 0 or 1 to user space.
      
      The problems with this are:
      
      * On big-endian machines, this will always write a zero because it
        stores the wrong byte into user space.
      
      * In compat mode, the upper three bytes of the variable are updated
        by the compat_hdio_ioctl() function, but they now contain
        uninitialized stack data.
      
      * The hdparm tool calling this ioctl uses a 'static long' variable
        to store the result. This means at least the upper bytes are
        initialized to zero, but calling another ioctl like HDIO_GET_MULTCOUNT
        would fill them with data that remains stale when the low byte
        is overwritten. Fortunately libata doesn't implement any of the
        affected ioctl commands, so this would only happen when we query
        both an IDE and an ATA device in the same command such as
        "hdparm -N -c /dev/hda /dev/sda"
      
      * The libata code for unknown reasons started using ATA_IOC_GET_IO32
        and ATA_IOC_SET_IO32 as aliases for HDIO_GET_32BIT and HDIO_SET_32BIT,
        while the ioctl commands that were added later use the normal
        HDIO_* names. This is harmless but rather confusing.
      
      This addresses all four issues by changing the code to use put_user()
      on an 'unsigned long' variable in HDIO_GET_32BIT, like the IDE subsystem
      does, and by clarifying the names of the ioctl commands.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Reported-by: default avatarSoohoon Lee <Soohoon.Lee@f5.com>
      Tested-by: default avatarSoohoon Lee <Soohoon.Lee@f5.com>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      287e6611
    • Suman Tripathi's avatar
      ahci_xgene: Implement the workaround to fix the missing of the edge interrupt... · 32aea268
      Suman Tripathi authored
      ahci_xgene: Implement the workaround to fix the missing of the edge interrupt for the HOST_IRQ_STAT.
      
      Due to H/W errata, the HOST_IRQ_STAT register misses the edge interrupt
      when clearing the HOST_IRQ_STAT register and hardware reporting the
      PORT_IRQ_STAT register happens to be at the same clock cycle.
      Signed-off-by: default avatarSuman Tripathi <stripathi@apm.com>
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      32aea268
    • Suman Tripathi's avatar
      ata: Remove the AHCI_HFLAG_EDGE_IRQ support from libahci. · d867b95f
      Suman Tripathi authored
      The flexibility to override the irq handles in the LLD's are already
      present, so controllers implementing a edge trigger latch can
      implement their own interrupt handler inside the driver.  This patch
      removes the AHCI_HFLAG_EDGE_IRQ support from libahci and moves edge
      irq handling to ahci_xgene.
      
      tj: Minor update to description.
      Signed-off-by: default avatarSuman Tripathi <stripathi@apm.com>
      Signed-off-by: default avatarTejun Heo <tj@kenrel.org>
      d867b95f
    • Suman Tripathi's avatar
      libahci: Implement the capability to override the generic ahci interrupt handler. · f070d671
      Suman Tripathi authored
      This patch implements the capability to override the generic AHCI
      interrupt handler so that specific ahci drivers can implement their
      own custom interrupt handler routines.  It also exports
      ahci_handle_port_intr so that custom irq_handler implementations can
      use it.
      
      tj: s/ahci_irq_handler/irq_handler/ and updated description.
      Signed-off-by: default avatarSuman Tripathi <stripathi@apm.com>
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      f070d671
  5. 10 Feb, 2016 1 commit
  6. 01 Feb, 2016 1 commit
    • Tejun Heo's avatar
      libata: fix sff host state machine locking while polling · 8eee1d3e
      Tejun Heo authored
      The bulk of ATA host state machine is implemented by
      ata_sff_hsm_move().  The function is called from either the interrupt
      handler or, if polling, a work item.  Unlike from the interrupt path,
      the polling path calls the function without holding the host lock and
      ata_sff_hsm_move() selectively grabs the lock.
      
      This is completely broken.  If an IRQ triggers while polling is in
      progress, the two can easily race and end up accessing the hardware
      and updating state machine state at the same time.  This can put the
      state machine in an illegal state and lead to a crash like the
      following.
      
        kernel BUG at drivers/ata/libata-sff.c:1302!
        invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN
        Modules linked in:
        CPU: 1 PID: 10679 Comm: syz-executor Not tainted 4.5.0-rc1+ #300
        Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
        task: ffff88002bd00000 ti: ffff88002e048000 task.ti: ffff88002e048000
        RIP: 0010:[<ffffffff83a83409>]  [<ffffffff83a83409>] ata_sff_hsm_move+0x619/0x1c60
        ...
        Call Trace:
         <IRQ>
         [<ffffffff83a84c31>] __ata_sff_port_intr+0x1e1/0x3a0 drivers/ata/libata-sff.c:1584
         [<ffffffff83a85611>] ata_bmdma_port_intr+0x71/0x400 drivers/ata/libata-sff.c:2877
         [<     inline     >] __ata_sff_interrupt drivers/ata/libata-sff.c:1629
         [<ffffffff83a85bf3>] ata_bmdma_interrupt+0x253/0x580 drivers/ata/libata-sff.c:2902
         [<ffffffff81479f98>] handle_irq_event_percpu+0x108/0x7e0 kernel/irq/handle.c:157
         [<ffffffff8147a717>] handle_irq_event+0xa7/0x140 kernel/irq/handle.c:205
         [<ffffffff81484573>] handle_edge_irq+0x1e3/0x8d0 kernel/irq/chip.c:623
         [<     inline     >] generic_handle_irq_desc include/linux/irqdesc.h:146
         [<ffffffff811a92bc>] handle_irq+0x10c/0x2a0 arch/x86/kernel/irq_64.c:78
         [<ffffffff811a7e4d>] do_IRQ+0x7d/0x1a0 arch/x86/kernel/irq.c:240
         [<ffffffff86653d4c>] common_interrupt+0x8c/0x8c arch/x86/entry/entry_64.S:520
         <EOI>
         [<     inline     >] rcu_lock_acquire include/linux/rcupdate.h:490
         [<     inline     >] rcu_read_lock include/linux/rcupdate.h:874
         [<ffffffff8164b4a1>] filemap_map_pages+0x131/0xba0 mm/filemap.c:2145
         [<     inline     >] do_fault_around mm/memory.c:2943
         [<     inline     >] do_read_fault mm/memory.c:2962
         [<     inline     >] do_fault mm/memory.c:3133
         [<     inline     >] handle_pte_fault mm/memory.c:3308
         [<     inline     >] __handle_mm_fault mm/memory.c:3418
         [<ffffffff816efb16>] handle_mm_fault+0x2516/0x49a0 mm/memory.c:3447
         [<ffffffff8127dc16>] __do_page_fault+0x376/0x960 arch/x86/mm/fault.c:1238
         [<ffffffff8127e358>] trace_do_page_fault+0xe8/0x420 arch/x86/mm/fault.c:1331
         [<ffffffff8126f514>] do_async_page_fault+0x14/0xd0 arch/x86/kernel/kvm.c:264
         [<ffffffff86655578>] async_page_fault+0x28/0x30 arch/x86/entry/entry_64.S:986
      
      Fix it by ensuring that the polling path is holding the host lock
      before entering ata_sff_hsm_move() so that all hardware accesses and
      state updates are performed under the host lock.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Reported-and-tested-by: default avatarDmitry Vyukov <dvyukov@google.com>
      Link: http://lkml.kernel.org/g/CACT4Y+b_JsOxJu2EZyEf+mOXORc_zid5V1-pLZSroJVxyWdSpw@mail.gmail.com
      Cc: stable@vger.kernel.org
      8eee1d3e
  7. 29 Jan, 2016 1 commit
    • Tejun Heo's avatar
      libata-sff: use WARN instead of BUG on illegal host state machine state · a588afc9
      Tejun Heo authored
      ata_sff_hsm_move() triggers BUG if it sees a host state machine state
      that it dind't expect.  The risk for data corruption when the
      condition occurs is low as it's highly unlikely that it would lead to
      spurious completion of commands.  The BUG occasionally triggered for
      subtle race conditions in the driver.  Let's downgrade it to WARN so
      that it doesn't kill the machine unnecessarily.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Cc: Dmitry Vyukov <dvyukov@google.com>
      a588afc9
  8. 25 Jan, 2016 3 commits
  9. 24 Jan, 2016 25 commits
    • Linus Torvalds's avatar
      Linux 4.5-rc1 · 92e963f5
      Linus Torvalds authored
      92e963f5
    • Linus Torvalds's avatar
      Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus · e2464688
      Linus Torvalds authored
      Pull MIPS updates from Ralf Baechle:
       "This is the main pull request for MIPS for 4.5 plus some 4.4 fixes.
      
        The executive summary:
      
         - ATH79 platform improvments, use DT bindings for the ATH79 USB PHY.
         - Avoid useless rebuilds for zboot.
         - jz4780: Add NEMC, BCH and NAND device tree nodes
         - Initial support for the MicroChip's DT platform.  As all the device
           drivers are missing this is still of limited use.
         - Some Loongson3 cleanups.
         - The unavoidable whitespace polishing.
         - Reduce clock skew when synchronizing the CPU cycle counters on CPU
           startup.
         - Add MIPS R6 fixes.
         - Lots of cleanups across arch/mips as fallout from KVM.
         - Lots of minor fixes and changes for IEEE 754-2008 support to the
           FPU emulator / fp-assist software.
         - Minor Ralink, BCM47xx and bcm963xx platform support improvments.
         - Support SMP on BCM63168"
      
      * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (84 commits)
        MIPS: zboot: Add support for serial debug using the PROM
        MIPS: zboot: Avoid useless rebuilds
        MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB
        MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function
        MIPS: bcm963xx: Update bcm_tag field image_sequence
        MIPS: bcm963xx: Move extended flash address to bcm_tag header file
        MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure
        MIPS: bcm63xx: nvram: Use nvram structure definition from header file
        MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure
        MAINTAINERS: Add KVM for MIPS entry
        MIPS: KVM: Add missing newline to kvm_err()
        MIPS: Move KVM specific opcodes into asm/inst.h
        MIPS: KVM: Use cacheops.h definitions
        MIPS: Break down cacheops.h definitions
        MIPS: Use EXCCODE_ constants with set_except_vector()
        MIPS: Update trap codes
        MIPS: Move Cause.ExcCode trap codes to mipsregs.h
        MIPS: KVM: Make kvm_mips_{init,exit}() static
        MIPS: KVM: Refactor added offsetof()s
        MIPS: KVM: Convert EXPORT_SYMBOL to _GPL
        ...
      e2464688
    • Linus Torvalds's avatar
      Merge tag 'platform-drivers-x86-v4.5-2' of... · e1c10879
      Linus Torvalds authored
      Merge tag 'platform-drivers-x86-v4.5-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
      
      Pull x86 platform driver updates from Darren Hart:
       "Emergency travel prevented me from completing my final testing on this
        until today.  Nothing here that couldn't wait until RC1 fixes, but I
        thought it best to get it out sooner rather than later as it does
        contain a build warning fix.
      
        Summary:
      
        A build warning fix, MAINTAINERS cleanup, and a new DMI quirk:
      
        ideapad-laptop:
         - Add Lenovo Yoga 700 to no_hw_rfkill dmi list
      
        MAINTAINERS:
         - Combine multiple telemetry entries
      
        intel_telemetry_debugfs:
         - Fix unused warnings in telemetry debugfs"
      
      * tag 'platform-drivers-x86-v4.5-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
        ideapad-laptop: Add Lenovo Yoga 700 to no_hw_rfkill dmi list
        MAINTAINERS: Combine multiple telemetry entries
        intel_telemetry_debugfs: Fix unused warnings in telemetry debugfs
      e1c10879
    • Linus Torvalds's avatar
      Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux · 81f05fee
      Linus Torvalds authored
      Pull thermal management updates from Zhang Rui:
       "The top merge commit was re-generated yesterday because two topic
        branches were dropped from this pull request in the last minute due to
        some unaddressed comments.  All the other material has been in
        linux-next for quite a while.
      
        Specifics:
      
         - Enhance thermal core to handle unexpected device cooling states
           after fresh boot and system resume.  From Zhang Rui and Chen Yu.
      
         - Several fixes and cleanups on Rockchip and RCAR thermal drivers.
           From Caesar Wang and Kuninori Morimoto.
      
         - Add Broxton support for Intel processor thermal reporting device
           driver.  From Amy Wiles"
      
      * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
        thermal: trip_point_temp_store() calls thermal_zone_device_update()
        thermal: rcar: rcar_thermal_get_temp() return error if strange temp
        thermal: rcar: check irq possibility in rcar_thermal_irq_xxx()
        thermal: rcar: check every rcar_thermal_update_temp() return value
        thermal: rcar: move rcar_thermal_dt_ids to upside
        thermal: rockchip: Support the RK3399 SoCs in thermal driver
        thermal: rockchip: Support the RK3228 SoCs in thermal driver
        dt-bindings: rockchip-thermal: Support the RK3228/RK3399 SoCs compatible
        thermal: rockchip: fix a trivial typo
        Thermal: Enable Broxton SoC thermal reporting device
        thermal: constify pch_dev_ops structure
        Thermal: do thermal zone update after a cooling device registered
        Thermal: handle thermal zone device properly during system sleep
        Thermal: initialize thermal zone device correctly
      81f05fee
    • Linus Torvalds's avatar
      Merge tag 'for-linus-4.5-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs · c52cb431
      Linus Torvalds authored
      Pull 9p updates from Eric Van Hensbergen:
       "Sorry for the last minute pull request, there's was a change that
        didn't get pulled into for-next until two weeks ago and I wanted to
        give it some bake time.
      
        Summary:
      
        Rework and error handling fixes, primarily in the fscatch and fd
        transports"
      
      * tag 'for-linus-4.5-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
        fs/9p: use fscache mutex rather than spinlock
        9p: trans_fd, bail out if recv fcall if missing
        9p: trans_fd, read rework to use p9_parse_header
        net/9p: Add device name details on error
      c52cb431
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client · 00e3f5cc
      Linus Torvalds authored
      Pull Ceph updates from Sage Weil:
       "The two main changes are aio support in CephFS, and a series that
        fixes several issues in the authentication key timeout/renewal code.
      
        On top of that are a variety of cleanups and minor bug fixes"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
        libceph: remove outdated comment
        libceph: kill off ceph_x_ticket_handler::validity
        libceph: invalidate AUTH in addition to a service ticket
        libceph: fix authorizer invalidation, take 2
        libceph: clear messenger auth_retry flag if we fault
        libceph: fix ceph_msg_revoke()
        libceph: use list_for_each_entry_safe
        ceph: use i_size_{read,write} to get/set i_size
        ceph: re-send AIO write request when getting -EOLDSNAP error
        ceph: Asynchronous IO support
        ceph: Avoid to propagate the invalid page point
        ceph: fix double page_unlock() in page_mkwrite()
        rbd: delete an unnecessary check before rbd_dev_destroy()
        libceph: use list_next_entry instead of list_entry_next
        ceph: ceph_frag_contains_value can be boolean
        ceph: remove unused functions in ceph_frag.h
      00e3f5cc
    • Linus Torvalds's avatar
      Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6 · 772950ed
      Linus Torvalds authored
      Pull SMB3 fixes from Steve French:
       "A collection of CIFS/SMB3 fixes.
      
        It includes a couple bug fixes, a few for improved debugging of
        cifs.ko and some improvements to the way cifs does key generation.
      
        I do have some additional bug fixes I expect in the next week or two
        (to address a problem found by xfstest, and some fixes for SMB3.11
        dialect, and a couple patches that just came in yesterday that I am
        reviewing)"
      
      * 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
        cifs_dbg() outputs an uninitialized buffer in cifs_readdir()
        cifs: fix race between call_async() and reconnect()
        Prepare for encryption support (first part). Add decryption and encryption key generation. Thanks to Metze for helping with this.
        cifs: Allow using O_DIRECT with cache=loose
        cifs: Make echo interval tunable
        cifs: Check uniqueid for SMB2+ and return -ESTALE if necessary
        Print IP address of unresponsive server
        cifs: Ratelimit kernel log messages
      772950ed
    • Josh Boyer's avatar
      ideapad-laptop: Add Lenovo Yoga 700 to no_hw_rfkill dmi list · 6b31de3e
      Josh Boyer authored
      Like the Yoga 900 models the Lenovo Yoga 700 does not have a
      hw rfkill switch, and trying to read the hw rfkill switch through the
      ideapad module causes it to always reported blocking breaking wifi.
      
      This commit adds the Lenovo Yoga 700 to the no_hw_rfkill dmi list, fixing
      the wifi breakage.
      
      BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1295272
      Tested-by: <dinyar.rabady+spam@gmail.com>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarJosh Boyer <jwboyer@fedoraproject.org>
      Signed-off-by: default avatarDarren Hart <dvhart@linux.intel.com>
      6b31de3e
    • Souvik Kumar Chakravarty's avatar
      MAINTAINERS: Combine multiple telemetry entries · f1fc3cd8
      Souvik Kumar Chakravarty authored
      This patch combines all the telemetry file entries in MAINTAINERS via
      wildcard.
      Signed-off-by: default avatarSouvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
      Signed-off-by: default avatarDarren Hart <dvhart@linux.intel.com>
      f1fc3cd8
    • Souvik Kumar Chakravarty's avatar
      intel_telemetry_debugfs: Fix unused warnings in telemetry debugfs · 7885f2f9
      Souvik Kumar Chakravarty authored
      This patch fixes compile time warnings when CONFIG_PM_SLEEP
      is undefined. In this case sleep related counters are unused.
      Signed-off-by: default avatarSouvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
      Signed-off-by: default avatarDarren Hart <dvhart@linux.intel.com>
      7885f2f9
    • Christoph Lameter's avatar
      vmstat: Remove BUG_ON from vmstat_update · 587198ba
      Christoph Lameter authored
      If we detect that there is nothing to do just set the flag and do not
      check if it was already set before.  Races really do not matter.  If the
      flag is set by any code then the shepherd will start dealing with the
      situation and reenable the vmstat workers when necessary again.
      
      Since commit 0eb77e98 ("vmstat: make vmstat_updater deferrable again
      and shut down on idle") quiet_vmstat might update cpu_stat_off and mark
      a particular cpu to be handled by vmstat_shepherd.  This might trigger a
      VM_BUG_ON in vmstat_update because the work item might have been
      sleeping during the idle period and see the cpu_stat_off updated after
      the wake up.  The VM_BUG_ON is therefore misleading and no more
      appropriate.  Moreover it doesn't really suite any protection from real
      bugs because vmstat_shepherd will simply reschedule the vmstat_work
      anytime it sees a particular cpu set or vmstat_update would do the same
      from the worker context directly.  Even when the two would race the
      result wouldn't be incorrect as the counters update is fully idempotent.
      Reported-by: default avatarSasha Levin <sasha.levin@oracle.com>
      Signed-off-by: default avatarChristoph Lameter <cl@linux.com>
      Acked-by: default avatarMichal Hocko <mhocko@suse.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
      Cc: Andrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      587198ba
    • Ralf Baechle's avatar
      07d17f09
    • Alban Bedel's avatar
      MIPS: zboot: Add support for serial debug using the PROM · dbb98314
      Alban Bedel authored
      As most platforms implement the PROM serial interface prom_putchar()
      add a simple bridge to allow re-using this code for zboot.
      Signed-off-by: default avatarAlban Bedel <albeu@free.fr>
      Cc: Alex Smith <alex.smith@imgtec.com>
      Cc: Andrew Bresticker <abrestic@chromium.org>
      Cc: Wu Zhangjin <wuzhangjin@gmail.com>
      Cc: linux-mips@linux-mips.org
      Cc: linux-kernel@vger.kernel.org
      Patchwork: https://patchwork.linux-mips.org/patch/11811/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      dbb98314
    • Alban Bedel's avatar
      MIPS: zboot: Avoid useless rebuilds · 25f66096
      Alban Bedel authored
      Add dummy.o to the targets list, and fill targets automatically from
      $(vmlinuzobjs) to avoid having to maintain two lists.
      
      When building with XZ compression copy ashldi3.c to the build
      directory to use a different object file for the kernel and zboot.
      Without this the same object file need to be build with different
      flags which cause a rebuild at every run.
      Signed-off-by: default avatarAlban Bedel <albeu@free.fr>
      Cc: linux-mips@linux-mips.org
      Cc: Alex Smith <alex.smith@imgtec.com>
      Cc: Wu Zhangjin <wuzhangjin@gmail.com>
      Cc: Andrew Bresticker <abrestic@chromium.org>
      Cc: linux-kernel@vger.kernel.org
      Patchwork: https://patchwork.linux-mips.org/patch/11810/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      25f66096
    • Florian Fainelli's avatar
      MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB · a7b43812
      Florian Fainelli authored
      Allow BMIPS_GENERIC supported platforms to build GPIO controller
      drivers.
      Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Reviewed-by: default avatarDragan Stancevic <dragan.stancevic@gmail.com>
      Cc: cernekee@gmail.com
      Cc: jaedon.shin@gmail.com
      Cc: gregory.0xf0@gmail.com
      Cc: Florian Fainelli <f.fainelli@gmail.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/12019/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      a7b43812
    • Simon Arlott's avatar
      MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function · 5bdb102b
      Simon Arlott authored
      Remove bcm63xx_nvram_get_psi_size() as it now has no users.
      Signed-off-by: default avatarSimon Arlott <simon@fire.lp0.eu>
      Cc: David Woodhouse <dwmw2@infradead.org>
      Cc: Brian Norris <computersforpeace@gmail.com>
      Cc: Kevin Cernekee <cernekee@gmail.com>
      Cc: Florian Fainelli <f.fainelli@gmail.com>
      Cc: Jonas Gorski <jogo@openwrt.org>
      Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
      Cc: MIPS Mailing List <linux-mips@linux-mips.org>
      Cc: MTD Maling List <linux-mtd@lists.infradead.org>
      Patchwork: https://patchwork.linux-mips.org/patch/11836/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      5bdb102b
    • Simon Arlott's avatar
      MIPS: bcm963xx: Update bcm_tag field image_sequence · 696569f7
      Simon Arlott authored
      The "dual_image" and "inactive_flag" fields should be merged into a single
      "image_sequence" field.
      Signed-off-by: default avatarSimon Arlott <simon@fire.lp0.eu>
      Cc: David Woodhouse <dwmw2@infradead.org>
      Cc: Brian Norris <computersforpeace@gmail.com>
      Cc: Kevin Cernekee <cernekee@gmail.com>
      Cc: Florian Fainelli <f.fainelli@gmail.com>
      Cc: Jonas Gorski <jogo@openwrt.org>
      Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
      Cc: MIPS Mailing List <linux-mips@linux-mips.org>
      Cc: MTD Maling List <linux-mtd@lists.infradead.org>
      Patchwork: https://patchwork.linux-mips.org/patch/11834/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      696569f7
    • Simon Arlott's avatar
      MIPS: bcm963xx: Move extended flash address to bcm_tag header file · 1f29cb19
      Simon Arlott authored
      The extended flash address needs to be subtracted from bcm_tag flash
      image offsets. Move this value to the bcm_tag header file.
      
      Renamed define name to consistently use bcm963xx for flash layout
      which should be considered a property of the board and not the SoC
      (i.e. bcm63xx could theoretically be used on a board without CFE
      or any flash).
      Signed-off-by: default avatarSimon Arlott <simon@fire.lp0.eu>
      Cc: David Woodhouse <dwmw2@infradead.org>
      Cc: Brian Norris <computersforpeace@gmail.com>
      Cc: Kevin Cernekee <cernekee@gmail.com>
      Cc: Florian Fainelli <f.fainelli@gmail.com>
      Cc: Jonas Gorski <jogo@openwrt.org>
      Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
      Cc: MIPS Mailing List <linux-mips@linux-mips.org>
      Cc: MTD Maling List <linux-mtd@lists.infradead.org>
      Patchwork: https://patchwork.linux-mips.org/patch/11833/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      1f29cb19
    • Simon Arlott's avatar
      MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure · 8fce60b8
      Simon Arlott authored
      Move Broadcom BCM963xx image tag data structure to include/linux/
      so that drivers outside of mach-bcm63xx can use it.
      Signed-off-by: default avatarSimon Arlott <simon@fire.lp0.eu>
      Cc: David Woodhouse <dwmw2@infradead.org>
      Cc: Brian Norris <computersforpeace@gmail.com>
      Cc: Kevin Cernekee <cernekee@gmail.com>
      Cc: Florian Fainelli <f.fainelli@gmail.com>
      Cc: Jonas Gorski <jogo@openwrt.org>
      Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
      Cc: MIPS Mailing List <linux-mips@linux-mips.org>
      Cc: MTD Maling List <linux-mtd@lists.infradead.org>
      Patchwork: https://patchwork.linux-mips.org/patch/11832/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      8fce60b8
    • Simon Arlott's avatar
      MIPS: bcm63xx: nvram: Use nvram structure definition from header file · 5a8b0b13
      Simon Arlott authored
      Use the common definition of the nvram structure from the header file
      include/linux/bcm963xx_nvram.h instead of maintaining a separate copy.
      
      Read the version 5 size of nvram data from memory and then call the
      new checksum verification function from the header file.
      Signed-off-by: default avatarSimon Arlott <simon@fire.lp0.eu>
      Cc: David Woodhouse <dwmw2@infradead.org>
      Cc: Brian Norris <computersforpeace@gmail.com>
      Cc: Kevin Cernekee <cernekee@gmail.com>
      Cc: Florian Fainelli <f.fainelli@gmail.com>
      Cc: Jonas Gorski <jogo@openwrt.org>
      Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
      Cc: MIPS Mailing List <linux-mips@linux-mips.org>
      Cc: MTD Maling List <linux-mtd@lists.infradead.org>
      Patchwork: https://patchwork.linux-mips.org/patch/11831/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      5a8b0b13
    • Simon Arlott's avatar
      MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure · 3271e610
      Simon Arlott authored
      Broadcom BCM963xx boards have multiple nvram variants across different
      SoCs with additional checksum fields added whenever the size of the
      nvram was extended.
      
      Add this structure as a header file so that multiple drivers can use it.
      Signed-off-by: default avatarSimon Arlott <simon@fire.lp0.eu>
      Cc: David Woodhouse <dwmw2@infradead.org>
      Cc: Brian Norris <computersforpeace@gmail.com>
      Cc: Kevin Cernekee <cernekee@gmail.com>
      Cc: Florian Fainelli <f.fainelli@gmail.com>
      Cc: Jonas Gorski <jogo@openwrt.org>
      Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
      Cc: MIPS Mailing List <linux-mips@linux-mips.org>
      Cc: MTD Maling List <linux-mtd@lists.infradead.org>
      Patchwork: https://patchwork.linux-mips.org/patch/11830/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      3271e610
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma · 048ccca8
      Linus Torvalds authored
      Pull rdma updates from Doug Ledford:
       "Initial roundup of 4.5 merge window patches
      
         - Remove usage of ib_query_device and instead store attributes in
           ib_device struct
      
         - Move iopoll out of block and into lib, rename to irqpoll, and use
           in several places in the rdma stack as our new completion queue
           polling library mechanism.  Update the other block drivers that
           already used iopoll to use the new mechanism too.
      
         - Replace the per-entry GID table locks with a single GID table lock
      
         - IPoIB multicast cleanup
      
         - Cleanups to the IB MR facility
      
         - Add support for 64bit extended IB counters
      
         - Fix for netlink oops while parsing RDMA nl messages
      
         - RoCEv2 support for the core IB code
      
         - mlx4 RoCEv2 support
      
         - mlx5 RoCEv2 support
      
         - Cross Channel support for mlx5
      
         - Timestamp support for mlx5
      
         - Atomic support for mlx5
      
         - Raw QP support for mlx5
      
         - MAINTAINERS update for mlx4/mlx5
      
         - Misc ocrdma, qib, nes, usNIC, cxgb3, cxgb4, mlx4, mlx5 updates
      
         - Add support for remote invalidate to the iSER driver (pushed
           through the RDMA tree due to dependencies, acknowledged by nab)
      
         - Update to NFSoRDMA (pushed through the RDMA tree due to
           dependencies, acknowledged by Bruce)"
      
      * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (169 commits)
        IB/mlx5: Unify CQ create flags check
        IB/mlx5: Expose Raw Packet QP to user space consumers
        {IB, net}/mlx5: Move the modify QP operation table to mlx5_ib
        IB/mlx5: Support setting Ethernet priority for Raw Packet QPs
        IB/mlx5: Add Raw Packet QP query functionality
        IB/mlx5: Add create and destroy functionality for Raw Packet QP
        IB/mlx5: Refactor mlx5_ib_qp to accommodate other QP types
        IB/mlx5: Allocate a Transport Domain for each ucontext
        net/mlx5_core: Warn on unsupported events of QP/RQ/SQ
        net/mlx5_core: Add RQ and SQ event handling
        net/mlx5_core: Export transport objects
        IB/mlx5: Expose CQE version to user-space
        IB/mlx5: Add CQE version 1 support to user QPs and SRQs
        IB/mlx5: Fix data validation in mlx5_ib_alloc_ucontext
        IB/sa: Fix netlink local service GFP crash
        IB/srpt: Remove redundant wc array
        IB/qib: Improve ipoib UD performance
        IB/mlx4: Advertise RoCE v2 support
        IB/mlx4: Create and use another QP1 for RoCEv2
        IB/mlx4: Enable send of RoCE QP1 packets with IP/UDP headers
        ...
      048ccca8
    • James Hogan's avatar
      MAINTAINERS: Add KVM for MIPS entry · bfd3d532
      James Hogan authored
      I've pretty much been maintaining KVM for MIPS for a while now. Lets
      make it more official (and make sure I get Cc'd on relevant patches).
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: Gleb Natapov <gleb@kernel.org>
      Cc: linux-mips@linux-mips.org
      Cc: kvm@vger.kernel.org
      Patchwork: https://patchwork.linux-mips.org/patch/11898/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      bfd3d532
    • James Hogan's avatar
      MIPS: KVM: Add missing newline to kvm_err() · f7fdcb60
      James Hogan authored
      Add missing newline to end of kvm_err string when guest PMAP couldn't be
      allocated.
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Cc: Gleb Natapov <gleb@kernel.org>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: kvm@vger.kernel.org
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/11896/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      f7fdcb60
    • James Hogan's avatar
      MIPS: Move KVM specific opcodes into asm/inst.h · b2c59635
      James Hogan authored
      The header arch/mips/kvm/opcode.h defines a few extra opcodes which
      aren't in arch/mips/include/uapi/asm/inst.h. There's nothing KVM
      specific about them, so lets move them into inst.h where they belong and
      delete the header.
      
      Note that mfmcz_op is renamed to mfmc0_op to match the instruction set
      manual, and wait_op was already added to inst.h in commit b0a3eae2
      ("MIPS: inst.h: define COP0 wait op"), merged in v3.16-rc1.
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: Gleb Natapov <gleb@kernel.org>
      Cc: linux-mips@linux-mips.org
      Cc: kvm@vger.kernel.org
      Patchwork: https://patchwork.linux-mips.org/patch/11895/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      b2c59635