- 02 Apr, 2020 40 commits
-
-
John Hubbard authored
As part of pin_user_pages() and related API calls, pages are "dma-pinned". For the case of compound pages of order > 1, the per-page accounting of dma pins is accomplished via the 3rd struct page in the compound page. In order to support debugging of any pin_user_pages()- related problems, enhance dump_page() so as to report the pin count in that case. Documentation/core-api/pin_user_pages.rst is also updated accordingly. Signed-off-by:
John Hubbard <jhubbard@nvidia.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Link: http://lkml.kernel.org/r/20200211001536.1027652-13-jhubbard@nvidia.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Matthew Wilcox (Oracle) authored
There was no protection against a corrupted struct page having an implausible compound_head(). Sanity check that a compound page has a head within reach of the maximum allocatable page (this will need to be adjusted if one of the plans to allocate 1GB pages comes to fruition). In addition, - Print the mapping pointer using %p insted of %px. The actual value of the pointer can be read out of the raw page dump and using %p gives a chance to correlate it with an earlier printk of the mapping pointer - Print the mapping pointer from the head page, not the tail page (the tail ->mapping pointer may be in use for other purposes, eg part of a list_head) - Print the order of the page for compound pages - Dump the raw head page as well as the raw page - Print the refcount from the head page, not the tail page Suggested-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
-
John Hubbard authored
It's good to have basic unit test coverage of the new FOLL_PIN behavior. Fortunately, the gup_benchmark unit test is extremely fast (a few milliseconds), so adding it the the run_vmtests suite is going to cause no noticeable change in running time. So, add two new invocations to run_vmtests: 1) Run gup_benchmark with normal get_user_pages(). 2) Run gup_benchmark with pin_user_pages(). This is much like the first call, except that it sets FOLL_PIN. Running these two in quick succession also provide a visual comparison of the running times, which is convenient. The new invocations are fairly early in the run_vmtests script, because with test suites, it's usually preferable to put the shorter, faster tests first, all other things being equal. Signed-off-by:
Ira Weiny <ira.weiny@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Link: http://lkml.kernel.org/r/20200211001536.1027652-11-jhubbard@nvidia.comSigned-off-by:
-
John Hubbard authored
Up until now, gup_benchmark supported testing of the following kernel functions: * get_user_pages(): via the '-U' command line option * get_user_pages_longterm(): via the '-L' command line option * get_user_pages_fast(): as the default (no options required) Add test coverage for the new corresponding pin_*() functions: * pin_user_pages_fast(): via the '-a' command line option * pin_user_pages(): via the '-b' command line option Also, add an option for clarity: '-u' for what is now (still) the default choice: get_user_pages_fast(). Also, for the commands that set FOLL_PIN, verify that the pages really are dma-pinned, via the new is_dma_pinned() routine. Those commands are: PIN_FAST_BENCHMARK : calls pin_user_pages_fast() PIN_BENCHMARK : calls pin_user_pages() In between the calls to pin_*() and unpin_user_pages(), check each page: if page_maybe_dma_pinned() returns false, then WARN and return. Do this outside of the benchmark timestamps, so that it doesn't affect reported times. Signed-off-by: -
John Hubbard authored
Now that pages are "DMA-pinned" via pin_user_page*(), and unpinned via unpin_user_pages*(), we need some visibility into whether all of this is working correctly. Add two new fields to /proc/vmstat: nr_foll_pin_acquired nr_foll_pin_released These are documented in Documentation/core-api/pin_user_pages.rst. They represent the number of pages (since boot time) that have been pinned ("nr_foll_pin_acquired") and unpinned ("nr_foll_pin_released"), via pin_user_pages*() and unpin_user_pages*(). In the absence of long-running DMA or RDMA operations that hold pages pinned, the above two fields will normally be equal to each other. Also: update Documentation/core-api/pin_user_pages.rst, to remove an earlier (now confirmed untrue) claim about a performance problem with /proc/vmstat. Also: update Documentation/core-api/pin_user_pages.rst to rename the new /proc/vmstat entries, to the names listed here. Signed-off-by:Jan Kara <jack@suse.cz> Acked-by:
-
John Hubbard authored
For huge pages (and in fact, any compound page), the GUP_PIN_COUNTING_BIAS scheme tends to overflow too easily, each tail page increments the head page->_refcount by GUP_PIN_COUNTING_BIAS (1024). That limits the number of huge pages that can be pinned. This patch removes that limitation, by using an exact form of pin counting for compound pages of order > 1. The "order > 1" is required because this approach uses the 3rd struct page in the compound page, and order 1 compound pages only have two pages, so that won't work there. A new struct page field, hpage_pinned_refcount, has been added, replacing a padding field in the union (so no new space is used). This enhancement also has a useful side effect: huge pages and compound pages (of order > 1) do not suffer from the "potential false positives" problem that is discussed in the page_dma_pinned() comment block. That is because these compound pages have extra space for tracking things, so they get exact pin counts instead of overloading page->_refcount. Documentation/core-api/pin_user_pages.rst is updated accordingly. Suggested-by:
-
John Hubbard authored
Add tracking of pages that were pinned via FOLL_PIN. This tracking is implemented via overloading of page->_refcount: pins are added by adding GUP_PIN_COUNTING_BIAS (1024) to the refcount. This provides a fuzzy indication of pinning, and it can have false positives (and that's OK). Please see the pre-existing Documentation/core-api/pin_user_pages.rst for details. As mentioned in pin_user_pages.rst, callers who effectively set FOLL_PIN (typically via pin_user_pages*()) are required to ultimately free such pages via unpin_user_page(). Please also note the limitation, discussed in pin_user_pages.rst under the "TODO: for 1GB and larger huge pages" section. (That limitation will be removed in a following patch.) The effect of a FOLL_PIN flag is similar to that of FOLL_GET, and may be thought of as "FOLL_GET for DIO and/or RDMA use". Pages that have been pinned via FOLL_PIN are identifiable via a new function call: bool page_maybe_dma_pinned(struct page *page); What to do in response to encountering such a page, is left to later patchsets. There is discussion about this in [1], [2], [3], and [4]. This also changes a BUG_ON(), to a WARN_ON(), in follow_page_mask(). [1] Some slow progress on get_user_pages() (Apr 2, 2019): https://lwn.net/Articles/784574/ [2] DMA and get_user_pages() (LPC: Dec 12, 2018): https://lwn.net/Articles/774411/ [3] The trouble with get_user_pages() (Apr 30, 2018): https://lwn.net/Articles/753027/ [4] LWN kernel index: get_user_pages(): https://lwn.net/Kernel/Index/#Memory_management-get_user_pages [jhubbard@nvidia.com: add kerneldoc] Link: http://lkml.kernel.org/r/20200307021157.235726-1-jhubbard@nvidia.com [imbrenda@linux.ibm.com: if pin fails, we need to unpin, a simple put_page will not be enough] Link: http://lkml.kernel.org/r/20200306132537.783769-2-imbrenda@linux.ibm.com [akpm@linux-foundation.org: fix put_compound_head defined but not used] Suggested-by:Jérôme Glisse <jglisse@redhat.com> Signed-off-by:
Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by:
-
John Hubbard authored
Internal to mm/gup.c, require that get_user_pages_fast() and __get_user_pages_fast() identify themselves, by setting FOLL_GET. This is required in order to be able to make decisions based on "FOLL_PIN, or FOLL_GET, or both or neither are set", in upcoming patches. Signed-off-by:
-
John Hubbard authored
In preparation for an upcoming patch, send gup flags args to two more routines: put_compound_head(), and undo_dev_pagemap(). Signed-off-by:
-
John Hubbard authored
An upcoming patch requires subtracting a large chunk of refcounts from a page, and checking what the resulting refcount is. This is a little different than the usual "check for zero refcount" that many of the page ref functions already do. However, it is similar to a few other routines that (like this one) are generally useful for things such as 1-based refcounting. Add page_ref_sub_return(), that subtracts a chunk of refcounts atomically, and returns an atomic snapshot of the result. Signed-off-by:
-
John Hubbard authored
A subsequent patch requires access to gup flags, so pass the flags argument through to the __gup_device_* functions. Also placate checkpatch.pl by shortening a nearby line. Signed-off-by:
-
John Hubbard authored
Patch series "mm/gup: track FOLL_PIN pages", v6. This activates tracking of FOLL_PIN pages. This is in support of fixing the get_user_pages()+DMA problem described in [1]-[4]. FOLL_PIN support is now in the main linux tree. However, the patch to use FOLL_PIN to track pages was *not* submitted, because Leon saw an RDMA test suite failure that involved (I think) page refcount overflows when huge pages were used. This patch definitively solves that kind of overflow problem, by adding an exact pincount, for compound pages (of order > 1), in the 3rd struct page of a compound page. If available, that form of pincounting is used, instead of the GUP_PIN_COUNTING_BIAS approach. Thanks again to Jan Kara for that idea. Other interesting changes: * dump_page(): added one, or two new things to report for compound pages: head refcount (for all compound pages), and map_pincount (for compound pages of order > 1). * Documentation/core-api/pin_user_pages.rst: removed the "TODO" for the huge page refcount upper limit problems, and added notes about how it works now. Also added a note about the dump_page() enhancements. * Added some comments in gup.c and mm.h, to explain that there are two ways to count pinned pages: exact (for compound pages of order > 1) and fuzzy (GUP_PIN_COUNTING_BIAS: for all other pages). ============================================================ General notes about the tracking patch: This is a prerequisite to solving the problem of proper interactions between file-backed pages, and [R]DMA activities, as discussed in [1], [2], [3], [4] and in a remarkable number of email threads since about 2017. :) In contrast to earlier approaches, the page tracking can be incrementally applied to the kernel call sites that, until now, have been simply calling get_user_pages() ("gup"). In other words, opt-in by changing from this: get_user_pages() (sets FOLL_GET) put_page() to this: pin_user_pages() (sets FOLL_PIN) unpin_user_page() ============================================================ Future steps: * Convert more subsystems from get_user_pages() to pin_user_pages(). The first probably needs to be bio/biovecs, because any filesystem testing is too difficult without those in place. * Change VFS and filesystems to respond appropriately when encountering dma-pinned pages. * Work with Ira and others to connect this all up with file system leases. [1] Some slow progress on get_user_pages() (Apr 2, 2019): https://lwn.net/Articles/784574/ [2] DMA and get_user_pages() (LPC: Dec 12, 2018): https://lwn.net/Articles/774411/ [3] The trouble with get_user_pages() (Apr 30, 2018): https://lwn.net/Articles/753027/ [4] LWN kernel index: get_user_pages() https://lwn.net/Kernel/Index/#Memory_management-get_user_pages This patch (of 12): An upcoming patch requires reusing the implementation of get_user_pages_remote(). Split up get_user_pages_remote() into an outer routine that checks flags, and an implementation routine that will be reused. This makes subsequent changes much easier to understand. There should be no change in behavior due to this patch. Signed-off-by: -
Matthew Wilcox (Oracle) authored
- These were never called PCG flags; they've been called FGP flags since their introduction in 2014. - The FGP_FOR_MMAP flag was misleadingly documented as if it was an alternative to FGP_CREAT instead of an option to it. - Rename the 'offset' parameter to 'index'. - Capitalisation, formatting, rewording. Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
-
Matthew Wilcox (Oracle) authored
No in-tree users (proc, madvise, memcg, mincore) can be built as a module. Signed-off-by:
-
Matthew Wilcox (Oracle) authored
Dumping the page information in this circumstance helps for debugging. Signed-off-by:
-
Matthew Wilcox (Oracle) authored
This isn't just a random struct page, it's known to be a head page, and calling it head makes the function better self-documenting. The pgoff_t is less confusing if it's named index instead of offset. Also add a couple of comments to explain why we're doing various things. Signed-off-by:
Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20200318140253.6141-3-willy@infradead.orgSigned-off-by:
-
Matthew Wilcox (Oracle) authored
Use VM_FAULT_OOM instead of indirecting through vmf_error(-ENOMEM). Signed-off-by:
-
Souptick Joarder authored
The first argument of shrink_readahead_size_eio() is not used. Hence remove it from the function definition and from all the callers. Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by:
-
Xianting Tian authored
Mount failure issue happens under the scenario: Application forked dozens of threads to mount the same number of cramfs images separately in docker, but several mounts failed with high probability. Mount failed due to the checking result of the page(read from the superblock of loop dev) is not uptodate after wait_on_page_locked(page) returned in function cramfs_read: wait_on_page_locked(page); if (!PageUptodate(page)) { ... } The reason of the checking result of the page not uptodate: systemd-udevd read the loopX dev before mount, because the status of loopX is Lo_unbound at this time, so loop_make_request directly trigger the calling of io_end handler end_buffer_async_read, which called SetPageError(page). So It caused the page can't be set to uptodate in function end_buffer_async_read: if(page_uptodate && !PageError(page)) { SetPageUptodate(page); } Then mount operation is performed, it used the same page which is just accessed by systemd-udevd above, Because this page is not uptodate, it will launch a actual read via submit_bh, then wait on this page by calling wait_on_page_locked(page). When the I/O of the page done, io_end handler end_buffer_async_read is called, because no one cleared the page error(during the whole read path of mount), which is caused by systemd-udevd reading, so this page is still in "PageError" status, which can't be set to uptodate in function end_buffer_async_read, then caused mount failure. But sometimes mount succeed even through systemd-udeved read loopX dev just before, The reason is systemd-udevd launched other loopX read just between step 3.1 and 3.2, the steps as below: 1, loopX dev default status is Lo_unbound; 2, systemd-udved read loopX dev (page is set to PageError); 3, mount operation 1) set loopX status to Lo_bound; ==>systemd-udevd read loopX dev<== 2) read loopX dev(page has no error) 3) mount succeed As the loopX dev status is set to Lo_bound after step 3.1, so the other loopX dev read by systemd-udevd will go through the whole I/O stack, part of the call trace as below: SYS_read vfs_read do_sync_read blkdev_aio_read generic_file_aio_read do_generic_file_read: ClearPageError(page); mapping->a_ops->readpage(filp, page); here, mapping->a_ops->readpage() is blkdev_readpage. In latest kernel, some function name changed, the call trace as below: blkdev_read_iter generic_file_read_iter generic_file_buffered_read: /* * A previous I/O error may have been due to temporary * failures, eg. mutipath errors. * Pg_error will be set again if readpage fails. */ ClearPageError(page); /* Start the actual read. The read will unlock the page*/ error=mapping->a_ops->readpage(flip, page); We can see ClearPageError(page) is called before the actual read, then the read in step 3.2 succeed. This patch is to add the calling of ClearPageError just before the actual read of read path of cramfs mount. Without the patch, the call trace as below when performing cramfs mount: do_mount cramfs_read cramfs_blkdev_read read_cache_page do_read_cache_page: filler(data, page); or mapping->a_ops->readpage(data, page); With the patch, the call trace as below when performing mount: do_mount cramfs_read cramfs_blkdev_read read_cache_page: do_read_cache_page: ClearPageError(page); <== new add filler(data, page); or mapping->a_ops->readpage(data, page); With the patch, mount operation trigger the calling of ClearPageError(page) before the actual read, the page has no error if no additional page error happen when I/O done. Signed-off-by:Xianting Tian <xianting_tian@126.com> Signed-off-by:
-
Mauricio Faria de Oliveira authored
There used to be a 'retry' label in between the two (identical) checks when first introduced in commit f446daae ("mm: implement writeback livelock avoidance using page tagging"), and later modified/updated in commit 6e6938b6 ("writeback: introduce .tagged_writepages for the WB_SYNC_NONE sync stage"). The label has been removed in commit 64081362 ("mm/page-writeback.c: fix range_cyclic writeback vs writepages deadlock"), and the (identical) checks are now present / performed immediately one after another. So, remove/deduplicate the latter check, moving tag_pages_for_writeback() into the former check before the 'tag' variable assignment, so it's clear that it's not used in this (similarly-named) function call but only later in pagevec_lookup_range_tag(). Signed-off-by:
Mauricio Faria de Oliveira <mfo@canonical.com> Signed-off-by:
-
Jan Kara authored
When handling a page fault, we drop mmap_sem to start async readahead so that we don't block on IO submission with mmap_sem held. However there's no point to drop mmap_sem in case readahead is disabled. Handle that case to avoid pointless dropping of mmap_sem and retrying the fault. This was actually reported to block mlockall(MCL_CURRENT) indefinitely. Fixes: 6b4c9f44 ("filemap: drop the mmap_sem for all blocking operations") Reported-by:
Minchan Kim <minchan@kernel.org> Reported-by:
Robert Stupp <snazy@gmx.de> Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
-
Qian Cai authored
Kmemleak could scan task stacks while plain writes happens to those stack variables which could results in data races. For example, in sys_rt_sigaction and do_sigaction(), it could have plain writes in a 32-byte size. Since the kmemleak does not care about the actual values of a non-pointer and all do_sigaction() call sites only copy to stack variables, just disable KCSAN for kmemleak to avoid annotating anything outside Kmemleak just because Kmemleak scans everything. Suggested-by:
Marco Elver <elver@google.com> Signed-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Link: http://lkml.kernel.org/r/1583263716-25150-1-git-send-email-cai@lca.pwSigned-off-by:
-
Nathan Chancellor authored
Clang warns: mm/kmemleak.c:1955:28: warning: array comparison always evaluates to a constant [-Wtautological-compare] if (__start_ro_after_init < _sdata || __end_ro_after_init > _edata) ^ mm/kmemleak.c:1955:60: warning: array comparison always evaluates to a constant [-Wtautological-compare] if (__start_ro_after_init < _sdata || __end_ro_after_init > _edata) These are not true arrays, they are linker defined symbols, which are just addresses. Using the address of operator silences the warning and does not change the resulting assembly with either clang/ld.lld or gcc/ld (tested with diff + objdump -Dr). Suggested-by:Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Vlastimil Babka authored
This reverts commit ad2c8144. The function node_to_mem_node() was introduced by that commit for use in SLUB on systems with memoryless nodes, but it turned out to be unreliable on some architectures/configurations and a simpler solution exists than fixing it up. Thus commit 0715e6c5 ("mm, slub: prevent kmalloc_node crashes and memory leaks") removed the only user of node_to_mem_node() and we can revert the commit that introduced the function. Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Bharata B Rao <bharata@linux.ibm.com> Cc: Christopher Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nathan Lynch <nathanl@linux.ibm.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: PUVICHAKRAVARTHY RAMACHANDRAN <puvichakravarthy@in.ibm.com> Cc: Sachin Sant <sachinp@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20200320115533.9604-2-vbabka@suse.czSigned-off-by:
-
Kees Cook authored
In a recent discussion[1] with Vitaly Nikolenko and Silvio Cesare, it became clear that moving the freelist pointer away from the edge of allocations would likely improve the overall defensive posture of the inline freelist pointer. My benchmarks show no meaningful change to performance (they seem to show it being faster), so this looks like a reasonable change to make. Instead of having the freelist pointer at the very beginning of an allocation (offset 0) or at the very end of an allocation (effectively offset -sizeof(void *) from the next allocation), move it away from the edges of the allocation and into the middle. This provides some protection against small-sized neighboring overflows (or underflows), for which the freelist pointer is commonly the target. (Large or well controlled overwrites are much more likely to attack live object contents, instead of attempting freelist corruption.) The vaunted kernel build benchmark, across 5 runs. Before: Mean: 250.05 Std Dev: 1.85 and after, which appears mysteriously faster: Mean: 247.13 Std Dev: 0.76 Attempts at running "sysbench --test=memory" show the change to be well in the noise (sysbench seems to be pretty unstable here -- it's not really measuring allocation). Hackbench is more allocation-heavy, and while the std dev is above the difference, it looks like may manifest as an improvement as well: 20 runs of "hackbench -g 20 -l 1000", before: Mean: 36.322 Std Dev: 0.577 and after: Mean: 36.056 Std Dev: 0.598 [1] https://twitter.com/vnik5287/status/1235113523098685440Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Christoph Lameter <cl@linux.com> Cc: Vitaly Nikolenko <vnik@duasynt.com> Cc: Silvio Cesare <silvio.cesare@gmail.com> Cc: Christoph Lameter <cl@linux.com>Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Link: http://lkml.kernel.org/r/202003051624.AAAC9AECC@keescookSigned-off-by:
-
Kees Cook authored
Under CONFIG_SLAB_FREELIST_HARDENED=y, the obfuscation was relatively weak in that the ptr and ptr address were usually so close that the first XOR would result in an almost entirely 0-byte value[1], leaving most of the "secret" number ultimately being stored after the third XOR. A single blind memory content exposure of the freelist was generally sufficient to learn the secret. Add a swab() call to mix bits a little more. This is a cheap way (1 cycle) to make attacks need more than a single exposure to learn the secret (or to know _where_ the exposure is in memory). kmalloc-32 freelist walk, before: ptr ptr_addr stored value secret ffff90c22e019020@ffff90c22e019000 is 86528eb656b3b5bd (86528eb656b3b59d) ffff90c22e019040@ffff90c22e019020 is 86528eb656b3b5fd (86528eb656b3b59d) ffff90c22e019060@ffff90c22e019040 is 86528eb656b3b5bd (86528eb656b3b59d) ffff90c22e019080@ffff90c22e019060 is 86528eb656b3b57d (86528eb656b3b59d) ffff90c22e0190a0@ffff90c22e019080 is 86528eb656b3b5bd (86528eb656b3b59d) ... after: ptr ptr_addr stored value secret ffff9eed6e019020@ffff9eed6e019000 is 793d1135d52cda42 (86528eb656b3b59d) ffff9eed6e019040@ffff9eed6e019020 is 593d1135d52cda22 (86528eb656b3b59d) ffff9eed6e019060@ffff9eed6e019040 is 393d1135d52cda02 (86528eb656b3b59d) ffff9eed6e019080@ffff9eed6e019060 is 193d1135d52cdae2 (86528eb656b3b59d) ffff9eed6e0190a0@ffff9eed6e019080 is f93d1135d52cdac2 (86528eb656b3b59d) [1] https://blog.infosectcbr.com.au/2020/03/weaknesses-in-linux-kernel-heap.html Fixes: 2482ddec ("mm: add SLUB free list pointer obfuscation") Reported-by:
Silvio Cesare <silvio.cesare@gmail.com> Signed-off-by:
-
chenqiwu authored
There are slub_cpu_partial() and slub_set_cpu_partial() APIs to wrap kmem_cache->cpu_partial. This patch will use the two APIs to replace kmem_cache->cpu_partial in slub code. Signed-off-by:
chenqiwu <chenqiwu@xiaomi.com> Signed-off-by:
-
chenqiwu authored
There are slub_percpu_partial() and slub_set_percpu_partial() APIs to wrap kmem_cache->cpu_partial. This patch will use the two to replace cpu_slab->partial in slub code. Signed-off-by:
-
Kees Cook authored
This notice fills my boot logs with scary-looking asterisks but doesn't really tell me anything. Let's just remove it; validation errors are already reported separately, so this is just a redundant list of filesystems. $ dmesg | grep VALIDATE [ 0.306256] *** VALIDATE tmpfs *** [ 0.307422] *** VALIDATE proc *** [ 0.308355] *** VALIDATE cgroup *** [ 0.308741] *** VALIDATE cgroup2 *** [ 0.813256] *** VALIDATE bpf *** [ 0.815272] *** VALIDATE ramfs *** [ 0.815665] *** VALIDATE hugetlbfs *** [ 0.876970] *** VALIDATE nfs *** [ 0.877383] *** VALIDATE nfs4 *** Signed-off-by:
Seth Arnold <seth.arnold@canonical.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Link: http://lkml.kernel.org/r/202003061617.A8835CAAF@keescookSigned-off-by:
-
Matthew Wilcox (Oracle) authored
OCFS2 doesn't mind if memory reclaim makes I/Os happen; it just cares that it won't be reentered, so it can use memalloc_nofs_save() instead of memalloc_noio_save(). Signed-off-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Link: http://lkml.kernel.org/r/20200326200214.1102-1-willy@infradead.orgSigned-off-by:
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
wangjian authored
Under some conditions, the directory cannot be deleted. The specific scenarios are as follows: (for example, /mnt/ocfs2 is the mount point) 1. Create the /mnt/ocfs2/p_dir directory. At this time, the i_nlink corresponding to the inode of the /mnt/ocfs2/p_dir directory is equal to 2. 2. During the process of creating the /mnt/ocfs2/p_dir/s_dir directory, if the call to the inc_nlink function in ocfs2_mknod succeeds, the functions such as ocfs2_init_acl, ocfs2_init_security_set, and ocfs2_dentry_attach_lock fail. At this time, the i_nlink corresponding to the inode of the /mnt/ocfs2/p_dir directory is equal to 3, but /mnt/ocfs2/p_dir/s_dir is not added to the /mnt/ocfs2/p_dir directory entry. 3. Delete the /mnt/ocfs2/p_dir directory (rm -rf /mnt/ocfs2/p_dir). At this time, it is found that the i_nlink corresponding to the inode corresponding to the /mnt/ocfs2/p_dir directory is equal to 3. Therefore, the /mnt/ocfs2/p_dir directory cannot be deleted. Signed-off-by:
Jian wang <wangjian161@huawei.com> Signed-off-by:
Jun Piao <piaojun@huawei.com> Reviewed-by:
-
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://urldefense.com/v3/__https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html__;!!GqivPVa7Brio!OKPotRhYhHbCG2kibo8Q6_6CuKaa28d_74h1svxyR6rbshrK2L_BdrQpNbvJWBWb40QCkg$ [2] https://urldefense.com/v3/__https://github.com/KSPP/linux/issues/21__;!!GqivPVa7Brio!OKPotRhYhHbCG2kibo8Q6_6CuKaa28d_74h1svxyR6rbshrK2L_BdrQpNbvJWBUhNn9M6g$ [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://urldefense.com/v3/__https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html__;!!GqivPVa7Brio!OVOYL_CouISa5L1Lw-20EEFQntw6cKMx-j8UdY4z78uYgzKBUFcfpn50GaurvbV5v7YiUA$ [2] https://urldefense.com/v3/__https://github.com/KSPP/linux/issues/21__;!!GqivPVa7Brio!OVOYL_CouISa5L1Lw-20EEFQntw6cKMx-j8UdY4z78uYgzKBUFcfpn50GaurvbXs8Eh8eg$ [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: -
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://urldefense.com/v3/__https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html__;!!GqivPVa7Brio!NzMr-YRl2zy-K3lwLVVatz7x0uD2z7-ykQag4GrGigxmfWU8TWzDy6xrkTiW3hYl00czlw$ [2] https://urldefense.com/v3/__https://github.com/KSPP/linux/issues/21__;!!GqivPVa7Brio!NzMr-YRl2zy-K3lwLVVatz7x0uD2z7-ykQag4GrGigxmfWU8TWzDy6xrkTiW3hYHG1nAnw$ [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: -
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: -
Jules Irenge authored
Sparse reports warnings at ocfs2_refcount_cache_lock() and ocfs2_refcount_cache_unlock() warning: context imbalance in ocfs2_refcount_cache_lock() - wrong count at exit warning: context imbalance in ocfs2_refcount_cache_unlock() - unexpected unlock The root cause is the missing annotation at ocfs2_refcount_cache_lock() and at ocfs2_refcount_cache_unlock() Add the missing __acquires(&rf->rf_lock) annotation to ocfs2_refcount_cache_lock() Add the missing __releases(&rf->rf_lock) annotation to ocfs2_refcount_cache_unlock() Signed-off-by:
Jules Irenge <jbi.octave@gmail.com> Signed-off-by:
-
Alex Shi authored
We don't need 'err' in these 2 places, better to remove them. Signed-off-by:
Alex Shi <alex.shi@linux.alibaba.com> Signed-off-by:
-
wangyan authored
Correct annotation from "l_next_rec" to "l_next_free_rec" Signed-off-by:
Yan Wang <wangyan122@huawei.com> Signed-off-by:
-
wangyan authored
There is no need to log twice in several functions. Signed-off-by:
-
