- 14 Mar, 2024 2 commits
-
-
Guixin Liu authored
Use nvme_disk_is_ns_head helper instead of check fops directly, and also drop CONFIG_NVME_MULTIPATH check. Signed-off-by:
Guixin Liu <kanie@linux.alibaba.com> Reviewed-by:
Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Keith Busch <kbusch@kernel.org>
-
Chunguang Xu authored
We found a issue on production environment while using NVMe over RDMA, admin_q reconnect failed forever while remote target and network is ok. After dig into it, we found it may caused by a ABBA deadlock due to tag allocation. In my case, the tag was hold by a keep alive request waiting inside admin_q, as we quiesced admin_q while reset ctrl, so the request maked as idle and will not process before reset success. As fabric_q shares tagset with admin_q, while reconnect remote target, we need a tag for connect command, but the only one reserved tag was held by keep alive command which waiting inside admin_q. As a result, we failed to reconnect admin_q forever. In order to fix this issue, I think we should keep two reserved tags for admin queue. Fixes: ed01fee2 ("nvme-fabrics: only reserve a single tag") Signed-off-by:
Chunguang Xu <chunguang.xu@shopee.com> Reviewed-by:
-
- 08 Mar, 2024 5 commits
-
-
Guixin Liu authored
Add nvme_cmd_zone_append, nvme_cmd_zone_mgmt_send and nvme_cmd_zone_mgmt_recv parse to nvme target tracing. Signed-off-by:
-
Guixin Liu authored
Add nvme_fabrics_type_auth_send and nvme_fabrics_type_auth_receive to the nvme target's tracing facility. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Hannes Reinecke authored
When the length check for an icreq sqe fails we should not continue processing but rather return immediately as all other contents of that sqe cannot be relied on. Signed-off-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
-
Keith Busch authored
User visible messages containing the word "timeout" can be alarming. This one from nvme is just reporting a potentially informative device configuration, and everything is working as designed. Change the text to report the less concerning "D3 entry latency", which is where this value comes from anyway. Reported-by:
Len Brown <lenb@kernel.org> Reviewed-by:
-
- 07 Mar, 2024 2 commits
-
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe updates from Keith: "nvme updates for Linux 6.9 - RDMA target enhancements (Max) - Fabrics fixes (Max, Guixin, Hannes) - Atomic queue_limits usage (Christoph) - Const use for class_register (Ricardo) - Identification error handling fixes (Shin'ichiro, Keith)" * tag 'nvme-6.9-2024-03-07' of git://git.infradead.org/nvme: (31 commits) nvme: clear caller pointer on identify failure nvme: host: fix double-free of struct nvme_id_ns in ns_update_nuse() nvme: fcloop: make fcloop_class constant nvme: fabrics: make nvmf_class constant nvme: core: constify struct class usage nvme-fabrics: typo in nvmf_parse_key() nvme-multipath: use atomic queue limits API for stacking limits nvme-multipath: pass queue_limits to blk_alloc_disk nvme: use the atomic queue limits update API nvme: cleanup nvme_configure_metadata nvme: don't query identify data in configure_metadata nvme: split out a nvme_identify_ns_nvm helper nvme: move common logic into nvme_update_ns_info nvme: move setting the write cache flags out of nvme_set_queue_limits nvme: move a few things out of nvme_update_disk_info nvme: don't use nvme_update_disk_info for the multipath disk nvme: move blk_integrity_unregister into nvme_init_integrity nvme: cleanup the nvme_init_integrity calling conventions nvme: move max_integrity_segments handling out of nvme_init_integrity nvme: remove nvme_revalidate_zones ...
-
- 06 Mar, 2024 31 commits
-
-
Jens Axboe authored
Merge tag 'md-6.9-20240306' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.9/block Pull MD atomic queue limits changes from Song. * tag 'md-6.9-20240306' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: block: remove disk_stack_limits md: remove mddev->queue md: don't initialize queue limits md/raid10: use the atomic queue limit update APIs md/raid5: use the atomic queue limit update APIs md/raid1: use the atomic queue limit update APIs md/raid0: use the atomic queue limit update APIs md: add queue limit helpers md: add a mddev_is_dm helper md: add a mddev_add_trace_msg helper md: add a mddev_trace_remap helper
-
Christoph Hellwig authored
disk_stack_limits is unused now, remove it. Signed-off-by:
Song Liu <song@kernel.org> Tested-by:
-
Christoph Hellwig authored
Just use the request_queue from the gendisk pointer in the relatively few places that sill need it. Signed-off-by:
-
Christoph Hellwig authored
Initial queue limits are now set from ->run. Remove the superfluous initialization in md_alloc and level_store. Signed-off-by:
-
Christoph Hellwig authored
Build the queue limits outside the queue and apply them using queue_limits_set. To make the code more obvious also split the queue limits handling into separate helpers. Signed-off-by:
-
Christoph Hellwig authored
Build the queue limits outside the queue and apply them using queue_limits_set. To make the code more obvious also split the queue limits handling into separate helpers. Signed-off-by:
-
Christoph Hellwig authored
Build the queue limits outside the queue and apply them using queue_limits_set. To make the code more obvious also split the queue limits handling into a separate helper function. Signed-off-by:
-
Christoph Hellwig authored
Build the queue limits outside the queue and apply them using queue_limits_set. To make the code more obvious also split the queue limits handling into a separate helper function. Signed-off-by:
-
Christoph Hellwig authored
Add a few helpers that wrap the block queue limits API for use in MD. Signed-off-by:
-
Christoph Hellwig authored
Add a helper to check for a DM-mapped MD device instead of using the obfuscated ->gendisk or ->queue NULL checks. Signed-off-by:
-
Christoph Hellwig authored
Add a small wrapper around blk_add_trace_msg that hides some argument dereferences and the check for a DM-mapped MD device. Signed-off-by:
-
Christoph Hellwig authored
Add a helper to trace bio remapping that hides some argument dereferences and the check for a DM-mapped MD device. Signed-off-by:
-
Christoph Hellwig authored
bcache currently calculates the stripe size for the non-cached_dev case directly in bcache_device_init, but for the cached_dev case it does it in the caller. Consolidate it in one places, which also enables setting the io_opt queue_limit before allocating the gendisk so that it can be passed in instead of changing the limit just after the allocation. Signed-off-by:
Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20240226104826.283067-2-hch@lst.deSigned-off-by:
-
Damien Le Moal authored
In virtblk_read_zoned_limits(), setting a zoned block device maximum number of open and active zones using the functions disk_set_max_open_zones() and disk_set_max_active_zones() is incorrect as setting the limits for the request queue is now done atomically when the gendisk is created (with blk_mq_alloc_disk()). The value set by the disk_set_max_open/active_zones() functions will be overwritten. Fix this by setting the maximum number of open and active zones directly in the queue_limits structure passed to virtblk_read_zoned_limits(). Fixes: 8b837256 ("virtio_blk: pass queue_limits to blk_mq_alloc_disk") Signed-off-by:
Damien Le Moal <dlemoal@kernel.org> Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20240301192639.410183-2-dlemoal@kernel.orgSigned-off-by:
-
Chun-Yi Lee authored
This patch is against CVE-2023-6270. The description of cve is: A flaw was found in the ATA over Ethernet (AoE) driver in the Linux kernel. The aoecmd_cfg_pkts() function improperly updates the refcnt on `struct net_device`, and a use-after-free can be triggered by racing between the free on the struct and the access through the `skbtxq` global queue. This could lead to a denial of service condition or potential code execution. In aoecmd_cfg_pkts(), it always calls dev_put(ifp) when skb initial code is finished. But the net_device ifp will still be used in later tx()->dev_queue_xmit() in kthread. Which means that the dev_put(ifp) should NOT be called in the success path of skb initial code in aoecmd_cfg_pkts(). Otherwise tx() may run into use-after-free because the net_device is freed. This patch removed the dev_put(ifp) in the success path in aoecmd_cfg_pkts(), and added dev_put() after skb xmit in tx(). Link: https://nvd.nist.gov/vuln/detail/CVE-2023-6270 Fixes: 7562f876 ("[NET]: Rework dev_base via list_head (v3)") Signed-off-by:
Chun-Yi Lee <jlee@suse.com> Link: https://lore.kernel.org/r/20240305082048.25526-1-jlee@suse.comSigned-off-by:
-
Li Lingfeng authored
Commit 6d4e80db ("block: add capacity validation in bdev_add_partition()") add check of partition's start and end sectors to prevent exceeding the size of the disk when adding partitions. However, there is still no check for resizing partitions now. Move the check to blkpg_do_ioctl() to cover resizing partitions. Signed-off-by:
Li Lingfeng <lilingfeng3@huawei.com> Reviewed-by:
-
Roman Smirnov authored
The expression dst->nr_samples + src->nr_samples may have zero value on overflow. It is necessary to add a check to avoid division by zero. Found by Linux Verification Center (linuxtesting.org) with Svace. Signed-off-by:
Roman Smirnov <r.smirnov@omp.ru> Reviewed-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/20240305134509.23108-1-r.smirnov@omp.ruSigned-off-by:
-
Christoph Hellwig authored
Switch drbd_reconsider_queue_parameters to set up the queue parameters in an on-stack queue_limits structure and apply the atomically. Remove various helpers that have become so trivial that they can be folded into drbd_reconsider_queue_parameters. Signed-off-by:
-
Christoph Hellwig authored
Add a helper to check if discard is supported for a given connection / backing device combination. Signed-off-by:
Philipp Reisner <philipp.reisner@linbit.com> Reviewed-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Tested-by:
Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20240306140332.623759-7-philipp.reisner@linbit.comSigned-off-by:
-
Christoph Hellwig authored
fixup_write_zeroes always overrides the max_write_zeroes_sectors value a little further down the callchain, so don't bother to setup a limit in decide_on_discard_support. Signed-off-by:
-
Christoph Hellwig authored
drbd_setup_queue_param is only called by drbd_reconsider_queue_parameters and there is no really clear boundary of responsibilities between the two. Signed-off-by:
-
Christoph Hellwig authored
Factor out a drbd_backing_dev_max_segments helper that checks the backing device limitation. Signed-off-by:
-
Christoph Hellwig authored
Split out a drbd_max_peer_bio_size helper for the peer I/O size, and condense the various checks to a nested min3(..., max())) instead of using a lot of local variables. Signed-off-by:
-
Christoph Hellwig authored
Pass a queue_limits structure with the max_hw_sectors limit to blk_alloc_disk instead of updating the limit on the allocated gendisk. Signed-off-by:
-
Li kunyu authored
The ret variable in the function has not yet been effective and can be removed. Signed-off-by:
Li kunyu <kunyu@nfschina.com> Link: https://lore.kernel.org/r/20240306101444.1244-1-kunyu@nfschina.comSigned-off-by:
-
Li kunyu authored
ret is assigned first, so it does not need to initialize the assignment. Signed-off-by:
-
Li zeming authored
err is assigned first, so it does not need to initialize the assignment. Signed-off-by:
Li zeming <zeming@nfschina.com> Link: https://lore.kernel.org/r/20240306100216.69340-1-zeming@nfschina.comSigned-off-by:
-
Li zeming authored
error is assigned first, so it does not need to initialize the assignment. Signed-off-by:
-
Ricardo B. Marliere authored
Since commit 43a7206b ("driver core: class: make class_register() take a const *"), the driver core allows for struct class to be in read-only memory, so move the block_class structure to be declared at build time placing it into read-only memory, instead of having to be dynamically allocated at boot time. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Suggested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Ricardo B. Marliere <ricardo@marliere.net> Reviewed-by:
-
Jens Axboe authored
Merge tag 'md-6.9-20240305' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.9/block Pull MD fixes from Song: "This set fixes two issues: 1. dmraid regression since 6.7 kernels. This issue was initially reported in [1]. This set of fix has been reviewed and tested by md and dm folks. 2. raid5 hang since 6.7 kernel, reported in [2]. We haven't got a better fix for this issue yet. This revert is a workaround. It has been applied to 6.7 stable kernels [3], and proved to be affective. We will look more into this issue for a better fix. [1] https://lore.kernel.org/linux-raid/e5e8afe2-e9a8-49a2-5ab0-958d4065c55e@redhat.com/ [2] https://lore.kernel.org/linux-raid/20240123005700.9302-1-dan@danm.net/ [3] 87165c64fe1a in linux-6.7.y branch." * tag 'md-6.9-20240305' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: dm-raid: fix lockdep waring in "pers->hot_add_disk" dm-raid456, md/raid456: fix a deadlock for dm-raid456 while io concurrent with reshape dm-raid: add a new helper prepare_suspend() in md_personality md/dm-raid: don't call md_reap_sync_thread() directly dm-raid: really frozen sync_thread during suspend md: add a new helper reshape_interrupted() md: export helper md_is_rdwr() md: export helpers to stop sync_thread md: don't clear MD_RECOVERY_FROZEN for new dm-raid until resume Revert "Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d""
-
Christoph Hellwig authored
Pass the constant limits directly to blk_mq_alloc_disk, set the nonrot flag there as well, and then use the commit API to change the transfer size and logical block size dependent values. This relies on the assumption that no I/O can be pending before the devices moves into the ready state and doesn't need extra freezing for changes to the queue limits. Signed-off-by:
Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20240228133742.806274-4-hch@lst.deSigned-off-by:
-
