- 23 May, 2014 40 commits
-
-
Lad, Prabhakar authored
this patch gorups the v4l2_ioctl_ops and align them appropriately. No functional changes. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Lad, Prabhakar authored
this patch drops cropcap as this driver doesnt support cropping. Signed-off-by:
-
Lad, Prabhakar authored
this pacth drops unneeded module params and vpif_config_params. Signed-off-by:
-
Lad, Prabhakar authored
this patch moves the initalization of video device to a single place and uses macro to define the driver name and use it appropraitely in required places. Signed-off-by:
-
Lad, Prabhakar authored
the started member was indicating whether streaming was started or not, this can be determined by vb2 offering, this patch replaces the started member from struct common_obj with appropriate vb2 calls. Signed-off-by:
-
Lad, Prabhakar authored
This patch drops numbuffers member from struct common_obj as this was not required. Signed-off-by:
-
Lad, Prabhakar authored
The common->memory field is set but not used anywhere. Drop it. Signed-off-by:
-
Lad, Prabhakar authored
this patch drops reserving contigiuos memory for the device, as now with CMA support there is no need of this. This patch also prepares to removal of config_params. Signed-off-by:
-
Lad, Prabhakar authored
As fbuffers is not used anymore, remove it. No functional changes. Signed-off-by:
-
Lad, Prabhakar authored
Signed-off-by:
-
Lad, Prabhakar authored
this patch adds support to use v4l2_fh_open() and vb2_fop_release, which allows to drop driver specific struct vpif_fh, as this is handeled by core. This patch also drops vpif_g/s_priority as this handeled by core. Signed-off-by:
-
Lad, Prabhakar authored
No need to reinvent the wheel. Just use the already existing functions for that. Signed-off-by:
-
Lad, Prabhakar authored
this patch drops unnecessary check from start_streaming() callback as this is already done in try/s_fmt and some minor code cleanups, drops check for vb2_is_streaming() as this check is done by vb2 itself before calling this callback. Signed-off-by:
-
Lad, Prabhakar authored
this patch sets the sizes[0] of plane according to the fmt passed or which is being set in the channel, in both MMAP and USERPTR buffer type. This patch also move the calculation of offests(vpif_calculate_offsets()) to queue_setup() callback as after queue_setup() callback the application is no longer allowed to change format, and prepares to removal of config_params. Signed-off-by:
-
Lad, Prabhakar authored
this patch improve vpif_buffer_prepare() callback, as buf_prepare() callback is never called with invalid state and check for vb2_plane_vaddr(vb, 0) is dropped as payload check should be done unconditionally. Signed-off-by:
-
Lad, Prabhakar authored
this patch drops buf_cleanup() callback as this callback is never called with buffer state active. Signed-off-by:
-
Lad, Prabhakar authored
this patch adds support to release the buffer by calling vb2_buffer_done(), with state marked as VB2_BUF_STATE_QUEUED if start_streaming() call back fails. Signed-off-by:
-
Lad, Prabhakar authored
this patch makes use of vb2_ops_wait_prepare/finish helper functions. Signed-off-by:
-
Lad, Prabhakar authored
this patch drops the buf_init() callback as init of buf list is not required. Signed-off-by:
-
Lad, Prabhakar authored
this patch moves the initalization of vb2 queue and the DMA context to probe() and clean up in remove() callback respectively. Signed-off-by:
-
Sylwester Nawrocki authored
All platforms supported by this driver are going to get device tree support in this kernel release so remove code that would have been actually not used any more. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
S5PV210 is going to get DT support, so we can remove the camera bits from the only board using camera on S5PV210. This allows to clean the exynos4-is driver by dropping code for non-dt platforms. This patch can be dropped if a patch removing the whole board file is applied first. Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
Ensure dma_free_coherent() is not called with incorrect arguments and only when the memory was actually allocated. This will prevent possible crashes on error paths of the top level media device driver, when fimc-is device gets unregistered and its driver detached. Signed-off-by:
-
Sylwester Nawrocki authored
CONFIG_COMMON_CLK is not enabled on S5PV210 platform, so include some clk API data structures conditionally to avoid compilation errors. These #ifdefs will be removed for next kernel release, when the S5PV210 platform moves to DT and the common clk API. Signed-off-by:
-
Kiran AVND authored
This patch adds core support for v8 encoder. This patch also adds register definitions and buffer size requirements for H264 & VP8 encoding, needed for new firmware version v8 for MFC Signed-off-by:
Kiran AVND <avnd.kiran@samsung.com> Signed-off-by:
Pawel Osciak <posciak@chromium.org> Signed-off-by:
Arun Kumar K <arun.kk@samsung.com> [k.debski@samsung.com: Change MFC version macro name to MFC_V8_BIT] Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
-
Kiran AVND authored
This patch adds variant data and core support for V8 decoder. This patch also adds the register definition file for new firmware version v8 for MFC. Signed-off-by:
-
Kamil Debski authored
MFC versions support a different set of formats, this specially applies to the raw YUV formats. This patch changes enum_fmt, so that it only reports formats that are supported by the used MFC version. Signed-off-by:
-
Kamil Debski authored
The patch adding the v6 version of MFC changed the default format for the CAPTURE queue, but this also affects the v5 version. This patch solves this problem by checking the MFC version before assigning the default format. Signed-off-by:
-
Arun Kumar K authored
Renaming the IS_MFCV7 macro to IS_MFCV7_PLUS for the addition of MFCv8 support which reuses the v7 code. Signed-off-by:
-
Kiran AVND authored
This patch is needed in preparation to add MFC V8 where the register offsets are changed w.r.t MFC V6/V7. This patch adds variants of MFC V6 and V7 while accessing MFC registers. Registers are kept in mfc context and are initialized to a particular MFC variant during probe, which is used instead of macros. This avoids duplication of the code for MFC variants V6 & V7, and reduces the if_else checks while accessing registers of different MFC variants. Signed-off-by:
-
Arun Kumar K authored
The register S5P_FIMV_D_INIT_BUFFER_OPTIONS holds good for v6 firmware too. So moving the definition from v7 regs to v6. Signed-off-by:
-
Arun Kumar K authored
Update the MPEG4 decoder scratch buffer size as per the new v6 firmware. This updation is increasing the size and so is backward compatible with older v6 firmwares. Signed-off-by:
-
Pawel Osciak authored
Currently, for formats that are not H264, MFC driver will check the consumed stream size returned by the firmware and, based on that, will try to decide whether the bitstream buffer contained more than one frame. If the size of the buffer is larger than the consumed stream, it assumes that there are more frames in the buffer and that the buffer should be resubmitted for decode. This rarely works though and actually introduces problems, because: - v7 firmware will always return consumed stream size equal to whatever the driver passed to it when running decode (which is the size of the whole buffer), which means we will never try to resubmit, because the firmware will always tell us that it consumed all the data we passed to it; - v6 firmware will return the number of consumed bytes, but will not include the padding ("stuffing") bytes that are allowed after the frame in VP8. Since there is no way of figuring out how many of those bytes follow the frame without getting the frame size from IVF headers (or somewhere else, but not from the stream itself), the driver tries to guess that padding size is not larger than 4 bytes, which is not always true; The only way to make it work is to queue only one frame per buffer from userspace and the check in the kernel is useless and wrong for VP8. So adding VP8 also along with H264 to disallow re-submitting of buffer back to hardware for decode. Signed-off-by: -
Kiran AVND authored
Scratch buffer size updated for vp8 encoding as per the latest v7 firmware. As the new macro increases the scratch buffer size, it is backward compatible with the older firmware too. Signed-off-by:
-
Pawel Osciak authored
Currently, we allocate private codec buffers on STREAMON, which may fail if we are out of memory. We don't check for failure though, which will make us crash with the codec accessing random memory. We shouldn't be failing STREAMON with out of memory errors though. So move the allocation of private codec buffers to REQBUFS for OUTPUT queue. Also, move MFC instance opening and closing to REQBUFS as well, as it's tied to allocation and deallocation of private codec buffers. Signed-off-by:
-
Pawel Osciak authored
This is in preparation for a new flow to fix issues with streamon, which should not be allocating buffer memory. Signed-off-by:
-
Pawel Osciak authored
- Honor return values from vb2_reqbufs on REQBUFS(0). - Do not set the number of allocated buffers to 0 if userspace tries to request buffers again without freeing them. - There is no need to verify correct instance state on reqbufs, as we will verify this in queue_setup(). - There is also no need to verify that vb2_reqbufs() was able to allocate enough buffers (pb_count) and call buf_init on that many buffers (i.e. dst_buf_count is at least pb_count), because this will be verified by second queue_setup() call as well and vb2_reqbufs() will fail otherwise. - Only verify state is MFCINST_INIT when allocating, not when freeing. - Refactor and simplify code. Signed-off-by:
-
Pawel Osciak authored
Timestamps for destination buffers are assigned by copying them from corresponding source buffers when the decode operation results in a frame being outputted to a destination buffer. But the decision when to do this, i.e. whether the decode operation on current source buffer produced a destination frame, is wrongly based on "display status". Display status reflects the status of the destination buffer, not source. This used to work for firmwares version <= 6, because in addition to the above, we'd check the decoded frame type register, which was set to "skipped" if a destination frame was not produced, exiting early from s5p_mfc_handle_frame_new(). Firmware >=7 does not set the frame type register for frames that were not decoded anymore though, which results in us wrongly overwriting timestamps of previously decoded buffers (firmware reports the same destination buffer address as previously decoded one if a frame wasn't decoded during current operation). To do it properly, we should be basing our decision to copy the timestamp on the status of the source buffer, i.e. "decode status". The decode status register values are confusing, because in its case "display" means "a frame has been outputted to a destination buffer". We should copy if "decode and display" is returned in it. This also works on <= v6 firmware, which behaves in the same way with regards to decode status register. Signed-off-by:
-
Alexander Shiyan authored
This patch adds the missing mutex_destroy(), when the driver is removed. Signed-off-by:
Alexander Shiyan <shc_work@mail.ru> Signed-off-by:
-
Alexander Shiyan authored
There are no need to store resource struct and IRQ in the driver internal structure. This patch remove these fields and improve error handling by using proper return codes from devm_ioremap_resource() and devm_request_irq(). Signed-off-by:
-
