- 10 Jan, 2011 8 commits
-
-
Clemens Ladisch authored
On the Xonar Essence ST Deluxe, remove all mixer controls that would require I2C communication with the third DAC, which does not work because of an addressing conflict with the CS2000 chip. Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Clemens Ladisch authored
Change the PCM format used for the PCM1796 from left-justified to I2S to ensure that the correct format is used even for the Essence ST Deluxe's center/LFE DAC, where I2C does not work because of an address conflict with the CS2000 chip. Signed-off-by:
-
Clemens Ladisch authored
The PCM1796 needs the master clock for I2C communication to work, so add delays after clock changes to ensure that the clock is stable when we try to write the DACs' registers. Signed-off-by:
-
Clemens Ladisch authored
To make the I2C communication reliable when using the H6 daughterboard, reduce the I2C clock frequency. Signed-off-by:
-
Clemens Ladisch authored
Fix wrong register bits for SPI clock cycle times longer than 160 ns, and adjust the polling loop timeout for these speeds. Signed-off-by:
-
Clemens Ladisch authored
The number of DACs can now be deduced from the dac_channels_mixer field, so the private_data field is no longer needed. Signed-off-by:
-
Clemens Ladisch authored
For cards like the Xonar HDAV1.3, differentiate between the number of PCM channels that can be played and the number of channels whose volume can be adjusted. Signed-off-by:
-
Jesper Juhl authored
snd_pcm_hw_param_near() will leak the memory allocated to 'save' if the call to snd_pcm_hw_param_max() returns less than zero. This patch makes sure we never leak. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
-
- 02 Jan, 2011 6 commits
-
-
Andreas Mohr authored
- add some WARN_ONCE - add multi-I/O helper (and use helper struct) - fix off-by-1 DMA length bug - better variable naming Signed-off-by:
Andreas Mohr <andi@lisas.de> Signed-off-by:
-
Andreas Mohr authored
- much improved implementation due to clean codec hierarchy - preparation for potential per-codec spinlock change NOTE: additionally removes a chip->pcm[codec_type] NULL ptr check (due to it requiring access to external chip struct), however I believe this to be ok since this condition should not occur and most drivers don't check against that either. Signed-off-by:
-
Andreas Mohr authored
Signed-off-by:
-
Andreas Mohr authored
Signed-off-by:
-
Andreas Mohr authored
- use a separate variable for the frequency part, don't always "or" it - use a "clever"(?) macro to shorten the code Signed-off-by:
-
Andreas Mohr authored
- correct samples to be POSIX shell compatible - add logging of jiffies value in _pointer() - several comments - cleanup Signed-off-by:
-
- 14 Dec, 2010 1 commit
-
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
- 13 Dec, 2010 2 commits
-
-
Takashi Iwai authored
-
Tejun Heo authored
flush_scheduled_work() is deprecated and scheduled to be removed. * cancel[_delayed]_work() + flush_scheduled_work() -> cancel[_delayed]_work_sync(). * wm8350, wm8753 and soc-core use custom code to cancel a delayed work, execute it immediately if it was pending and wait for its completion. This is equivalent to flush_delayed_work_sync(). Use it instead. Signed-off-by:
Tejun Heo <tj@kernel.org> Acked-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
- 10 Dec, 2010 1 commit
-
-
Axel Lin authored
It does not make sense to set clientdata to onyx in onyx_i2c_remove() as we are going to kfree onyx. What we really want here is i2c_set_clientdata(client, NULL); Since the i2c core will take care of it now, so this patch just removes it. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Signed-off-by:
-
- 09 Dec, 2010 1 commit
-
-
Brian Bloniarz authored
Rev. E of the M-Audio Delta 66 is partially supported (commit ef2cd2cc), but the layout of the GPIO pins was still unclear. This patch adds the GPIO definitions so that communication to the CS8247 & 2x AK4524 works correctly. ALSA bug#3327 has more details; users cap & jhunt report there that the GPIO wiring is similar to the Digigram VX442 (chip select: pin 4 = CS8427, pin 5 = AK4524 #0, pin 6 = AK4524 #1). There has been a lot of conflicting information in the bug, but given these definitions, my Delta 66E works; I tested analog in&out at 44.1kHz & 96kHz, analog gain settings, S/PDIF clock sync, and S/PDIF in&out at 44.1kHz. Signed-off-by:
Brian Bloniarz <brian.bloniarz@gmail.com> Signed-off-by:
-
- 07 Dec, 2010 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2Linus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: ocfs2_connection_find() returns pointer to bad structure ocfs2: char is not always signed Ocfs2: Stop tracking a negative dentry after dentry_iput(). ocfs2: fix memory leak fs/ocfs2/dlm: Use GFP_ATOMIC under spin_lock
-
Olof Johansson authored
Commit 0ea12930 ("arm: return both physical and virtual addresses from addruart") took out the test for MMU on/off but didn't switch the ldr instructions to no longer be conditionals based on said test. Fix that. Signed-off-by:
Olof Johansson <olof@lixom.net> Acked-by:
Colin Cross <ccross@android.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 06 Dec, 2010 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6Linus Torvalds authored
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / Hibernate: Fix memory corruption related to swap PM / Hibernate: Use async I/O when reading compressed hibernation image
-
Rafael J. Wysocki authored
There is a problem that swap pages allocated before the creation of a hibernation image can be released and used for storing the contents of different memory pages while the image is being saved. Since the kernel stored in the image doesn't know of that, it causes memory corruption to occur after resume from hibernation, especially on systems with relatively small RAM that need to swap often. This issue can be addressed by keeping the GFP_IOFS bits clear in gfp_allowed_mask during the entire hibernation, including the saving of the image, until the system is finally turned off or the hibernation is aborted. Unfortunately, for this purpose it's necessary to rework the way in which the hibernate and suspend code manipulates gfp_allowed_mask. This change is based on an earlier patch from Hugh Dickins. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Reported-by:
Ondrej Zary <linux@rainbow-software.org> Acked-by:
Hugh Dickins <hughd@google.com> Reviewed-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: stable@kernel.org
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6524/1: GIC irq desciptor bug fix ARM: 6523/1: iop: ensure sched_clock() is notrace ARM: 6456/1: Fix for building DEBUG with sa11xx_base.c as a module. ARM: 6519/1: kuser: Fix incorrect cmpxchg syscall in kuser helpers ARM: 6505/1: kprobes: Don't HAVE_KPROBES when CONFIG_THUMB2_KERNEL is selected ARM: 6508/1: vexpress: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL ARM: 6507/1: RealView: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL ARM: 6504/1: Thumb-2: Fix long-distance conditional branches in head.S for Thumb-2. ARM: 6503/1: Thumb-2: Restore sensible zImage header layout for CONFIG_THUMB2_KERNEL ARM: 6502/1: Thumb-2: Fix CONFIG_THUMB2_KERNEL breakage in compressed/head.S ARM: 6501/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in mm/proc-v7.S ARM: 6500/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in kernel/head.S ARM: 6499/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in bootp/init.S ARM: 6498/1: vfp: Correct data alignment for CONFIG_THUMB2_KERNEL ARM: 6497/1: kexec: Correct data alignment for CONFIG_THUMB2_KERNEL ARM: 6496/1: GIC: Do not try to register more then NR_IRQS interrupts ARM: cns3xxx: Fix build with CONFIG_PCI=y
-
Bojan Smojver authored
This is a fix for reading LZO compressed image using async I/O. Essentially, instead of having just one page into which we keep reading blocks from swap, we allocate enough of them to cover the largest compressed size and then let block I/O pick them all up. Once we have them all (and here we wait), we decompress them, as usual. Obviously, the very first block we still pick up synchronously, because we need to know the size of the lot before we pick up the rest. Also fixed the copyright line, which I've forgotten before. Signed-off-by:
Bojan Smojver <bojan@rexursive.com> Signed-off-by:
-
-
Jeffrin Jose authored
This is a patch to the sound/ac97_bus.c file that fixes up a 80 character line limit issue found by the checkpatch.pl tool. Signed-off-by:
Jeffrin Jose <ahiliation@yahoo.co.in> Signed-off-by:
-
Clemens Ladisch authored
Reformat and update the comments that describe the hardware connections on the various models. Signed-off-by:
-
Clemens Ladisch authored
Instead of the hardcoded "CMI8788", show the actual chip name. Note: This is neither what the chip is (it's always the same), nor what the chip is actually called. Signed-off-by: -
Clemens Ladisch authored
To help with debugging, add the registers of the model-specific codecs to the controller and AC97 register dump in the proc file. Signed-off-by:
-
Clemens Ladisch authored
The "Front Panel" switch on the Xonar D1/DX actually switches only the output direction, so mark it appropriately. The front panel microphone is controlled by the FMIC2MIC bit of the CM9780. It was unconditionally enabled on the D1/DX and never set on the ST(X); add a control for it. Selecting the front panel microphone as source does not actually disable the microphone jack, but this is bug-compatible with the Windows driver, and users rely on it. Signed-off-by:
-
Clemens Ladisch authored
The GPIO bit that enables analog output on the Xonar HDAV1.3 also disables the HDMI audio output, so we better add a switch for it. Hopefully, this is sufficient to make the HDMI output work. Signed-off-by:
-
Clemens Ladisch authored
Initialize the configuration of some unknown GPIO output bits (that might not be used at all) to be the same as in the Windows driver, just to be sure. Signed-off-by:
-
Chao Xie authored
gic_set_cpu will directly use irq_desc[]. If CONFIG_SPARSE_IRQ is enabled, there is no irq_desc[]. So we need use irq_to_desc(irq) to get the descriptor for irq. Signed-off-by:
Chao Xie <chao.xie@marvell.com> Acked-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6Linus Torvalds authored
* 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slub: Fix a crash during slabinfo -v
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6Linus Torvalds authored
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: initramfs: Really fix build break on symbol-prefixed archs [media] Fix Kconfig errors due to two visible menus i2c/algos: convert Kconfig to use the menu's `visible' keyword media/video: convert Kconfig to use the menu's `visible' keyword Revert "i2c: Fix Kconfig dependencies" kconfig: regen parser kconfig: add an option to determine a menu's visibility
-
git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6Linus Torvalds authored
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: parisc: Fix GSC PS/2 driver name for keyboard and mouse parisc: KittyHawk LCD fix parisc: convert the rest of the irq handlers to simple/percpu parisc: fix dino/gsc interrupts parisc: remove redundant initialization in sigsegv path of sys_rt_sigreturn
-
Eric W. Biederman authored
Because it caused a chroot ttyname regression in 2.6.36. As of 2.6.36 ttyname does not work in a chroot. It has already been reported that screen breaks, and for me this breaks an automated distribution testsuite, that I need to preserve the ability to run the existing binaries on for several more years. glibc 2.11.3 which has a fix for this is not an option. The root cause of this breakage is: commit 8df9d1a4 Author: Miklos Szeredi <mszeredi@suse.cz> Date: Tue Aug 10 11:41:41 2010 +0200 vfs: show unreachable paths in getcwd and proc Prepend "(unreachable)" to path strings if the path is not reachable from the current root. Two places updated are - the return string from getcwd() - and symlinks under /proc/$PID. Other uses of d_path() are left unchanged (we know that some old software crashes if /proc/mounts is changed). Signed-off-by:Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> So remove the nice sounding, but ultimately ill advised change to how /proc/fd symlinks work. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
- 04 Dec, 2010 1 commit
-
-
Guy Martin authored
Fix kernel warnings caused by the driver name of GSC PS/2 containing '/'. The following warnings are observed on a K410 system : [ 10.700000] name 'GSC PS/2 keyboard' [ 10.732000] ------------[ cut here ]------------ [ 10.772000] WARNING: at fs/proc/generic.c:323 [ 10.828000] Modules linked in: [ 10.916000] [ 10.916000] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI [ 10.936000] PSW: 00000000000001000000000000001111 Not tainted [ 10.992000] r00-03 0004000f 104fe3e0 10201ea0 00000000 [ 11.060000] r04-07 4fc405c8 00000006 4fc405c8 4fc40694 [ 11.124000] r08-11 4fc40708 10438aa0 00000001 1043bfc8 [ 11.184000] r12-15 104ff2a0 104ff2a0 4fc38634 104ff2a0 [ 11.248000] r16-19 f0001570 10479af0 f000006c 1044fe50 [ 11.308000] r20-23 00000000 00000028 104cd858 00000000 [ 11.372000] r24-27 ffffffff 0000000e 1044fe10 1043bbe0 [ 11.436000] r28-31 0000002b 00000078 4fc40800 0000000d [ 11.496000] sr00-03 00000000 00000000 00000000 00000000 [ 11.560000] sr04-07 00000000 00000000 00000000 00000000 [ 11.624000] [ 11.688000] IASQ: 00000000 00000000 IAOQ: 10201ea0 10201ea4 [ 11.704000] IIR: 03ffe01f ISR: 00000000 IOR: 0000000d [ 11.772000] CPU: 0 CR30: 4fc40000 CR31: f01043b0 [ 11.836000] ORIG_R28: 4fc40940 [ 11.904000] IAOQ[0]: __xlate_proc_name+0x90/0xd0 [ 11.940000] IAOQ[1]: __xlate_proc_name+0x94/0xd0 [ 11.996000] RP(r2): __xlate_proc_name+0x90/0xd0 [ 12.052000] Backtrace: [ 12.108000] [<10257790>] vsnprintf+0x290/0x4f4 [ 12.136000] [ 12.188000] ---[ end trace 91bf6ece17e322dd ]--- [ 12.208000] serio: GSC PS/2 keyboard port at 0x0001c000 irq 19 @ 10:12:7 [ 12.264000] name 'GSC PS/2 mouse' [ 12.344000] ------------[ cut here ]------------ [ 12.384000] WARNING: at fs/proc/generic.c:323 [ 12.436000] Modules linked in: [ 12.524000] [ 12.528000] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI [ 12.544000] PSW: 00000000000001000000000000001111 Tainted: G W [ 12.600000] r00-03 0004000f 104fe3e0 10201ea0 00000000 [ 12.680000] r04-07 4fc405c8 00000006 4fc405c8 4fc40694 [ 12.740000] r08-11 4fc40708 10438aa0 00000001 1043bfc8 [ 12.804000] r12-15 104ff2a0 104ff2a0 4fc38634 104ff2a0 [ 12.868000] r16-19 f0001570 10479af0 f000006c 1044fe50 [ 12.928000] r20-23 00000000 00000025 104cd858 00000000 [ 12.992000] r24-27 ffffffff 0000000e 1044fe10 1043bbe0 [ 13.056000] r28-31 00000028 00000078 4fc40800 0000000d [ 13.116000] sr00-03 00000000 00000000 00000000 00000000 [ 13.180000] sr04-07 00000000 00000000 00000000 00000000 [ 13.244000] [ 13.308000] IASQ: 00000000 00000000 IAOQ: 10201ea0 10201ea4 [ 13.324000] IIR: 03ffe01f ISR: 00000000 IOR: 0000000d [ 13.392000] CPU: 0 CR30: 4fc40000 CR31: f01043b0 [ 13.456000] ORIG_R28: 4fc40940 [ 13.524000] IAOQ[0]: __xlate_proc_name+0x90/0xd0 [ 13.560000] IAOQ[1]: __xlate_proc_name+0x94/0xd0 [ 13.616000] RP(r2): __xlate_proc_name+0x90/0xd0 [ 13.672000] Backtrace: [ 13.728000] [<10257790>] vsnprintf+0x290/0x4f4 [ 13.756000] [ 13.808000] ---[ end trace 91bf6ece17e322de ]--- [ 13.828000] serio: GSC PS/2 mouse port at 0x00020100 irq 19 @ 10:12:8 Signed-off-by:
Guy Martin <gmsoft@tuxicoman.be> Acked-by:
Helge Deller <deller@gmx.de> Signed-off-by:
Kyle McMartin <kyle@mcmartin.ca>
-
