- 13 Jun, 2019 4 commits
-
-
Brad Love authored
Includes support to identify and use two Hauppauge device. - LGDT3306a ATSC/QAM demod - si2177 tuner - cx25840 decoder for analog tv/composite/s-video/audio HVR-1975 dual-frontend: - LGDT3306a ATSC/QAM demod - si2168 DVB-C/T/T2 demod - si2177 tuner - cx25840 decoder for analog tv/composite/s-video/audio Signed-off-by:
Brad Love <brad@nextdimension.cc> Reviewed-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Brad Love authored
i2c client device is the "new" method to attach to dvb modules, include support for this functionality. Cleanup code has been added to init in case of failure, as well as to frontend exit. Required by Hauppauge HVR-1975 Signed-off-by:
-
Brad Love authored
All changes are equivalent and backwards compatible. All current devices have been changed to use fe[0] Code has been added to dvb init to support cleanup after failure. Multiple frontends are required by Hauppauge HVR-1975, which is in a later commit. Signed-off-by:
-
Brad Love authored
Works in ATSC and QAM as is, DVB is completely untested. Firmware required. Signed-off-by:
-
- 12 Jun, 2019 16 commits
-
-
Mauro Carvalho Chehab authored
Add SPDX headers and fix MODULE_LICENSE() when needed on some files I co-authored. Signed-off-by: -
Masanari Iida authored
This patch fixes a spelling typo found in imx214.c Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Marek Szyprowski authored
MFC v6 and v7 has no register to read min scratch buffer size, so it has to be read conditionally only if hardware supports it. This fixes following NULL pointer exception on SoCs with MFC v6/v7: 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = f25837f9 [00000000] *pgd=bd93d835 Internal error: Oops: 17 [#1] PREEMPT SMP ARM Modules linked in: btmrvl_sdio btmrvl bluetooth mwifiex_sdio mwifiex ecdh_generic ecc Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) PC is at s5p_mfc_get_min_scratch_buf_size+0x30/0x3c LR is at s5p_mfc_get_min_scratch_buf_size+0x28/0x3c ... [<c074f998>] (s5p_mfc_get_min_scratch_buf_size) from [<c0745bc0>] (s5p_mfc_irq+0x814/0xa5c) [<c0745bc0>] (s5p_mfc_irq) from [<c019a218>] (__handle_irq_event_percpu+0x64/0x3f8) [<c019a218>] (__handle_irq_event_percpu) from [<c019a5d8>] (handle_irq_event_percpu+0x2c/0x7c) [<c019a5d8>] (handle_irq_event_percpu) from [<c019a660>] (handle_irq_event+0x38/0x5c) [<c019a660>] (handle_irq_event) from [<c019ebc4>] (handle_fasteoi_irq+0xc4/0x180) [<c019ebc4>] (handle_fasteoi_irq) from [<c0199270>] (generic_handle_irq+0x24/0x34) [<c0199270>] (generic_handle_irq) from [<c0199888>] (__handle_domain_irq+0x7c/0xec) [<c0199888>] (__handle_domain_irq) from [<c04ac298>] (gic_handle_irq+0x58/0x9c) [<c04ac298>] (gic_handle_irq) from [<c0101ab0>] (__irq_svc+0x70/0xb0) Exception stack(0xe73ddc60 to 0xe73ddca8) ... [<c0101ab0>] (__irq_svc) from [<c01967d8>] (console_unlock+0x5a8/0x6a8) [<c01967d8>] (console_unlock) from [<c01981d0>] (vprintk_emit+0x118/0x2d8) [<c01981d0>] (vprintk_emit) from [<c01983b0>] (vprintk_default+0x20/0x28) [<c01983b0>] (vprintk_default) from [<c01989b4>] (printk+0x30/0x54) [<c01989b4>] (printk) from [<c07500b8>] (s5p_mfc_init_decode_v6+0x1d4/0x284) [<c07500b8>] (s5p_mfc_init_decode_v6) from [<c07230d0>] (vb2_start_streaming+0x24/0x150) [<c07230d0>] (vb2_start_streaming) from [<c0724e4c>] (vb2_core_streamon+0x11c/0x15c) [<c0724e4c>] (vb2_core_streamon) from [<c07478b8>] (vidioc_streamon+0x64/0xa0) [<c07478b8>] (vidioc_streamon) from [<c0709640>] (__video_do_ioctl+0x28c/0x45c) [<c0709640>] (__video_do_ioctl) from [<c0709bc8>] (video_usercopy+0x260/0x8a4) [<c0709bc8>] (video_usercopy) from [<c02b3820>] (do_vfs_ioctl+0xb0/0x9fc) [<c02b3820>] (do_vfs_ioctl) from [<c02b41a0>] (ksys_ioctl+0x34/0x58) [<c02b41a0>] (ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x28) Exception stack(0xe73ddfa8 to 0xe73ddff0) ... ---[ end trace 376cf5ba6e0bee93 ]--- Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Young Xiao authored
If vpif_probe() fails on v4l2_device_register() and vpif_probe_complete(), then memory allocated at initialize_vpif() for global vpif_obj.dev[i] become unreleased. The patch adds deallocation of vpif_obj.dev[i] on the error path. Signed-off-by:
Young Xiao <92siuyang@gmail.com> Acked-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
YueHaibing authored
Fix building error: of function kthread_should_stop; did you mean thread_saved_sp? [-Werror=implicit-function-declaration] Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Maxime Jourdan <mjourdan@baylibre.com> Signed-off-by:
-
Anders Roxell authored
When building with CONFIG_VIDEO_CODA and CONFIG_CODA_FS enabled as loadable modules, we see the following warning: fs/coda/coda.ko drivers/media/platform/coda/coda.ko Rework so media/platform/coda is named coda-vpu. Leaving CODA_FS as is since that's a well known module. Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Anders Roxell authored
CONFIG_DRM_I2C_ADV7511 and CONFIG_VIDEO_ADV7511 bind to the same platform device, so whichever driver gets loaded first will be used on the device. So they shouldn't be enabled at the same time. Rework so that VIDEO_ADV7511 and VIDEO_COBALT depends on DRM_I2C_ADV7511=n or COMPILE_TEST. Suggested-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Tomasz Figa authored
I tend to review most of the vb2 patches anyway and we need some active reviewers, so let add me to the MAINTAINERS file as such. Signed-off-by:
Tomasz Figa <tfiga@chromium.org> Acked-by:
-
Hans Verkuil authored
Instead of filling in the struct v4l2_capability device_caps field, fill in the struct video_device device_caps field. That way the V4L2 core knows what the capabilities of the video device are. But this only really works if all drivers use this, so convert this touchscreen driver accordingly. Signed-off-by:
Florian Echtler <floe@butterbrot.org> Acked-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Philipp Zabel authored
Dynamically allocate clocks and move clock names out of struct hantro_variant. This lifts the four clock limit and allows to use ARRAY_SIZE() to fill .num_clocks to reduce the risk of mismatches. Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
-
Philipp Zabel authored
On i.MX8MQ/MM a separate control block contains registers for per-core resets, clock gating, and fuse register control. Signed-off-by:
-
Philipp Zabel authored
Add support for multiple register ranges with SoC specific names. Signed-off-by:
-
Philipp Zabel authored
The i.MX8MQ bindings will use different IRQ names ("g1" instead of "vdpu", and "g2"), so make them configurable. This also allows to register more than two IRQs, which will be required for i.MX8MM support later (it will add "h1" instead of "vepu"). Signed-off-by: -
Philipp Zabel authored
It seems that on i.MX8MQ the power domain controller does not propagate resets to the VPU cores on resume. Add a callback to allow implementing manual reset of the VPU cores after ungating the power domain. Signed-off-by:
-
Philipp Zabel authored
It can be helpful to know which video device was registered at which device node. Signed-off-by:
-
Philipp Zabel authored
Rename the driver and all relevant identifiers from Rockchip to Hantro, as other Hantro IP based VPU implementations can be supported by the same driver. The RK3288 decoder is Hantro G1 based, the encoder is Hantro H1. This patch just renames, no functional changes. Signed-off-by:
-
- 11 Jun, 2019 17 commits
-
-
Kieran Bingham authored
New Gen3 R-Car platforms incorporate the FDP1 with an updated version register. No code change is required to support these targets, but they will currently report an error stating that the device can not be identified. Update the driver to match against the new device types. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Wolfram Sang authored
We have a dedicated pointer for that, so use it. Much easier to read and less computation involved. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Oliver Neukum authored
We need to check whether this work we are canceling actually is initialized. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+2e1ef9188251d9cc7944@syzkaller.appspotmail.com Signed-off-by:
-
Torleiv Sundre authored
uvcvideo creates a debugfs directory based on the device bus number and device number. If a device contains more than one uvc function, the creation of the second and following debugfs directories will fail and print an info message like this: "uvcvideo: Unable to create debugfs 3-2 directory." This patch includes the uvc streaming interface number in the debugfs directory name, to make sure it is unique. The directory name format is changed from "<busnum>-<devnum>" to "<busnum>-<devnum>-<intfnum>" Signed-off-by:
Torleiv Sundre <torleiv@huddly.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
There are some conflicts due to SPDX changes. We also have more patches being merged via media tree touching them. So, let's merge back from upstream and address those. Linux 5.2-rc4 * tag 'v5.2-rc4': (767 commits) Linux 5.2-rc4 MAINTAINERS: Karthikeyan Ramasubramanian is MIA i2c: xiic: Add max_read_len quirk lockref: Limit number of cmpxchg loop retries uaccess: add noop untagged_addr definition x86/insn-eval: Fix use-after-free access to LDT entry kbuild: use more portable 'command -v' for cc-cross-prefix s390/unwind: correct stack switching during unwind block, bfq: add weight symlink to the bfq.weight cgroup parameter cgroup: let a symlink too be created with a cftype file drm/nouveau/secboot/gp10[2467]: support newer FW to fix SEC2 failures on some boards drm/nouveau/secboot: enable loading of versioned LS PMU/SEC2 ACR msgqueue FW drm/nouveau/secboot: split out FW version-specific LS function pointers drm/nouveau/secboot: pass max supported FW version to LS load funcs drm/nouveau/core: support versioned firmware loading drm/nouveau/core: pass subdev into nvkm_firmware_get, rather than device block: free sched's request pool in blk_cleanup_queue pktgen: do not sleep with the thread lock held. net: mvpp2: Use strscpy to handle stat strings net: rds: fix memory leak in rds_ib_flush_mr_pool ... Signed-off-by: -
Hans Verkuil authored
Correctly handle stopping and restarting the encoder, keeping track of the stop and drain states. In addition it adds correct handling of corner cases, allowing v4l2-compliance to pass. Unfortunately, the code is getting to be quite complicated, so we need to work on better codec support in v4l2-mem2mem.c to simplify drivers. Signed-off-by:
-
Hans Verkuil authored
Return an error when attempting to subscribe to those events for a stateless codec. Signed-off-by:
-
Hans Verkuil authored
After a resolution change is detected, q_data->sizeimage is updated to the new format, but buf_prepare is still draining buffers that need to use the old pre-resolution-change value. So store the sizeimage value in q_data->vb2_sizeimage in queue_setup and use that in buf_prepare. Signed-off-by:
-
Hans Verkuil authored
Set V4L2_BUF_FLAG_P/KEYFRAME after decoding a frame. Signed-off-by:
-
Hans Verkuil authored
The stateful encoder requires the presence of this control. Since a single buffer is sufficient for vicodec, we just set this control to 1. Signed-off-by:
-
Hans Verkuil authored
Setting the encoder output format to e.g. 1920x1080 will set the crop rectangle to 1920x1088, the coded resolution to 1920x1088 and the capture coded resolution and sizeimage to 1920x1088 as well. Note that this might change, since the encoder spec is still in flux with respect to how this should behave. Signed-off-by:
-
Hans Verkuil authored
The initial sizeimage value was wrong for the stateless decoder. Signed-off-by:
-
Hans Verkuil authored
Rather than returning width/height values of 0, just default to a format. Formats in V4L2 are always supposed to be valid, there is no concept of an invalid format. Signed-off-by:
-
Hans Verkuil authored
v4l2_ctrl_request_complete can sleep, so can't be called while a spinlock is held. Signed-off-by:
-
Maxime Jourdan authored
Add an entry for the meson video decoder for amlogic SoCs. Signed-off-by:
-
Maxime Jourdan authored
Amlogic SoCs feature a powerful video decoder unit able to decode many formats, with a performance of usually up to 4k60. This is a driver for this IP that is based around the v4l2 m2m framework. It features decoding for: - MPEG 1 - MPEG 2 Supported SoCs are: GXBB (S905), GXL (S905X/W/D), GXM (S912) There is also a hardware bitstream parser (ESPARSER) that is handled here. Signed-off-by:
-
Maxime Jourdan authored
Add documentation for the meson vdec dts node. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 10 Jun, 2019 3 commits
-
-
Sean Young authored
The IR protocol can now only be set via the rc protocols sysfs file rather than via module parameters or a custom procfs file. So, it is no longer necessary to periodically check for protocol changes. The IR_RCMM protocol does not decode the Philips RC-MM protocol (12, 24 or 32 bit variants) or any protocol rc-core can encode, so this is marked RC_PROTO_UNKNOWN. Tested on Technotrend/Hauppauge WinTV Nexus-S rev2.1, which comes with a small black hauppauge remote. Signed-off-by:
-
Tobias Klausmann authored
Move common code into a new function. This provides the needed functionality to use dvb_module_probe() instead of dvb_attach()! [mchehab+samsung@kernel.org: fix an out of order error return code] Signed-off-by:
Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Signed-off-by:
-
Tobias Klausmann authored
Refactor out the common parts of stv6110x_probe() and stv6110x_attach() into separate functions. This provides the needed functionality to use dvb_module_probe() instead of dvb_attach()! Signed-off-by:
-
