The LED2[2]/INTn pin on Marvell 88E1318S as well as 88E1510/12/14/18 needs
to be configured to be usable as interrupt not only when WOL is enabled,
but whenever we rely on interrupts from the PHY.
Signed-off-by: Esben Haabendal <eha@deif.com>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2018-04-06

This series contains a couple of fixes for the new ice driver.

Wei Yongjun fixes the return error code for error case during init.

Anirudh fixes the incorrect use of ARRAY_SIZE() in the ice ethtool code
and fixed "for" loop calculations.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

1) Return correct size from ice_get_regs_len.
2) Fix incorrect use of ARRAY_SIZE in ice_get_regs.

Fixes: fcea6f3d (ice: Add stats and ethtool support)
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Fix to return error code ICE_ERR_NO_MEMORY from the alloc error
handling case instead of 0, as done elsewhere in this function.

Fixes: dc49c772 ("ice: Get MAC/PHY/link info and scheduler topology")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

when tcf_bpf_init_from_ops() fails (e.g. because of program having invalid
number of instructions), tcf_bpf_cfg_cleanup() calls bpf_prog_put(NULL) or
bpf_prog_destroy(NULL). Unless CONFIG_BPF_SYSCALL is unset, this causes
the following error:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
 PGD 800000007345a067 P4D 800000007345a067 PUD 340e1067 PMD 0
 Oops: 0000 [#1] SMP PTI
 Modules linked in: act_bpf(E) ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache jbd2 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_generic pcbc snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd glue_helper cryptd joydev snd_timer snd virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_blk drm virtio_net virtio_console i2c_core crc32c_intel serio_raw virtio_pci ata_piix libata virtio_ring floppy virtio dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_bpf]
 CPU: 3 PID: 5654 Comm: tc Tainted: G            E    4.16.0.bpf_test+ #408
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:__bpf_prog_put+0xc/0xc0
 RSP: 0018:ffff9594003ef728 EFLAGS: 00010202
 RAX: 0000000000000000 RBX: ffff9594003ef758 RCX: 0000000000000024
 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
 R10: 0000000000000220 R11: ffff8a7ab9f17131 R12: 0000000000000000
 R13: ffff8a7ab7c3c8e0 R14: 0000000000000001 R15: ffff8a7ab88f1054
 FS:  00007fcb2f17c740(0000) GS:ffff8a7abfd80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000020 CR3: 000000007c888006 CR4: 00000000001606e0
 Call Trace:
  tcf_bpf_cfg_cleanup+0x2f/0x40 [act_bpf]
  tcf_bpf_cleanup+0x4c/0x70 [act_bpf]
  __tcf_idr_release+0x79/0x140
  tcf_bpf_init+0x125/0x330 [act_bpf]
  tcf_action_init_1+0x2cc/0x430
  ? get_page_from_freelist+0x3f0/0x11b0
  tcf_action_init+0xd3/0x1b0
  tc_ctl_action+0x18b/0x240
  rtnetlink_rcv_msg+0x29c/0x310
  ? _cond_resched+0x15/0x30
  ? __kmalloc_node_track_caller+0x1b9/0x270
  ? rtnl_calcit.isra.29+0x100/0x100
  netlink_rcv_skb+0xd2/0x110
  netlink_unicast+0x17c/0x230
  netlink_sendmsg+0x2cd/0x3c0
  sock_sendmsg+0x30/0x40
  ___sys_sendmsg+0x27a/0x290
  ? mem_cgroup_commit_charge+0x80/0x130
  ? page_add_new_anon_rmap+0x73/0xc0
  ? do_anonymous_page+0x2a2/0x560
  ? __handle_mm_fault+0xc75/0xe20
  __sys_sendmsg+0x58/0xa0
  do_syscall_64+0x6e/0x1a0
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
 RIP: 0033:0x7fcb2e58eba0
 RSP: 002b:00007ffc93c496c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 00007ffc93c497f0 RCX: 00007fcb2e58eba0
 RDX: 0000000000000000 RSI: 00007ffc93c49740 RDI: 0000000000000003
 RBP: 000000005ac6a646 R08: 0000000000000002 R09: 0000000000000000
 R10: 00007ffc93c49120 R11: 0000000000000246 R12: 0000000000000000
 R13: 00007ffc93c49804 R14: 0000000000000001 R15: 000000000066afa0
 Code: 5f 00 48 8b 43 20 48 c7 c7 70 2f 7c b8 c7 40 10 00 00 00 00 5b e9 a5 8b 61 00 0f 1f 44 00 00 0f 1f 44 00 00 41 54 55 48 89 fd 53 <48> 8b 47 20 f0 ff 08 74 05 5b 5d 41 5c c3 41 89 f4 0f 1f 44 00
 RIP: __bpf_prog_put+0xc/0xc0 RSP: ffff9594003ef728
 CR2: 0000000000000020

Fix it in tcf_bpf_cfg_cleanup(), ensuring that bpf_prog_{put,destroy}(f)
is called only when f is not NULL.

Fixes: bbc09e78 ("net/sched: fix idr leak on the error path of tcf_bpf_init()")
Reported-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

At the end of ip6_forward(), IPSTATS_MIB_OUTFORWDATAGRAMS and
IPSTATS_MIB_OUTOCTETS are incremented immediately before the NF_HOOK call
for NFPROTO_IPV6 / NF_INET_FORWARD.  As a result, these counters get
incremented regardless of whether or not the netfilter hook allows the
packet to continue being processed.  This change increments the counters
in ip6_forward_finish() so that it will not happen if the netfilter hook
chooses to terminate the packet, which is similar to how IPv4 works.
Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mohammed Gamal says:

====================
hv_netvsc: Fix shutdown issues on older Windows hosts

Guests running on WS2012 hosts would not shutdown when changing network
interface setting (e.g. Number of channels, MTU ... etc).

This patch series addresses these shutdown issues we enecountered with WS2012
hosts. It's essentialy a rework of the series sent in
https://lkml.org/lkml/2018/1/23/111 on top of latest upstream
====================

Fixes: 0ef58b0a ("hv_netvsc: change GPAD teardown order on older versions")
Signed-off-by: David S. Miller <davem@davemloft.net>

The callers to netvsc_revoke_*_buf() and netvsc_teardown_*_gpadl()
already have their net_device instances. Pass them as a paramaeter to
the function instead of obtaining them from netvsc_device struct
everytime
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prior to commit 0cf73780 ("hv_netvsc: netvsc_teardown_gpadl() split")
the call sequence in netvsc_device_remove() was as follows (as
implemented in netvsc_destroy_buf()):
1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message
2- Teardown receive buffer GPADL
3- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message
4- Teardown send buffer GPADL
5- Close vmbus

This didn't work for WS2016 hosts. Commit 0cf73780
("hv_netvsc: netvsc_teardown_gpadl() split") rearranged the
teardown sequence as follows:
1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message
2- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message
3- Close vmbus
4- Teardown receive buffer GPADL
5- Teardown send buffer GPADL

That worked well for WS2016 hosts, but it prevented guests on older hosts from
shutting down after changing network settings. Commit 0ef58b0a
("hv_netvsc: change GPAD teardown order on older versions") ensured the
following message sequence for older hosts
1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message
2- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message
3- Teardown receive buffer GPADL
4- Teardown send buffer GPADL
5- Close vmbus

However, with this sequence calling `ip link set eth0 mtu 1000` hangs and the
process becomes uninterruptible. On futher analysis it turns out that on tearing
down the receive buffer GPADL the kernel is waiting indefinitely
in vmbus_teardown_gpadl() for a completion to be signaled.

Here is a snippet of where this occurs:
int vmbus_teardown_gpadl(struct vmbus_channel *channel, u32 gpadl_handle)
{
        struct vmbus_channel_gpadl_teardown *msg;
        struct vmbus_channel_msginfo *info;
        unsigned long flags;
        int ret;

        info = kmalloc(sizeof(*info) +
                       sizeof(struct vmbus_channel_gpadl_teardown), GFP_KERNEL);
        if (!info)
                return -ENOMEM;

        init_completion(&info->waitevent);
        info->waiting_channel = channel;
[....]
        ret = vmbus_post_msg(msg, sizeof(struct vmbus_channel_gpadl_teardown),
                             true);

        if (ret)
                goto post_msg_err;

        wait_for_completion(&info->waitevent);
[....]
}

The completion is signaled from vmbus_ongpadl_torndown(), which gets called when
the corresponding message is received from the host, which apparently never happens
in that case.
This patch works around the issue by restoring the first mentioned message sequence
for older hosts

Fixes: 0ef58b0a ("hv_netvsc: change GPAD teardown order on older versions")
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Split each of the functions into two for each of send/recv buffers.
This will be needed in order to implement a fine-grained messaging
sequence to the host so that we accommodate the requirements of
different Windows versions

Fixes: 0ef58b0a ("hv_netvsc: change GPAD teardown order on older versions")
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When changing network interface settings, Windows guests
older than WS2016 can no longer shutdown. This was addressed
by commit 0ef58b0a ("hv_netvsc: change GPAD teardown order
on older versions"), however the issue also occurs on WS2012
guests that share NVSP protocol versions with WS2016 guests.
Hence we use Windows version directly to differentiate them.

Fixes: 0ef58b0a ("hv_netvsc: change GPAD teardown order on older versions")
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Boundary check in mvpp2_prs_init_from_hw must be done according to the
passed "tid" parameter, not the mvpp2_prs_entry index, which is not yet
initialized at the time of the check.

Fixes: 47e0e14e ("net: mvpp2: Make mvpp2_prs_hw_read a parser entry init function")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

arp_filter performs an ip_route_output search for arp source address and
checks if output device is the same where the arp request was received,
if it is not, the arp request is not answered.

This route lookup is always done on main route table so l3slave devices
never find the proper route and arp is not answered.

Passing l3mdev_master_ifindex_rcu(dev) return value as oif fixes the
lookup for l3slave devices while maintaining same behavior for non
l3slave devices as this function returns 0 in that case.

Fixes: 613d09b3 ("net: Use VRF device index for lookups on TX")
Signed-off-by: Miguel Fadon Perlines <mfadon@teldat.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
net: better validate user provided tunnel names

This series changes dev_valid_name() to not attempt reading
a possibly too long user-provided device name, then use
this helper in five different tunnel providers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Use valid_name() to make sure user does not provide illegal
device name.

Fixes: ed1efb2a ("ipv6: Add support for IPsec virtual tunnel interfaces")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use valid_name() to make sure user does not provide illegal
device name.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use dev_valid_name() to make sure user does not provide illegal
device name.

syzbot caught the following bug :

BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline]
BUG: KASAN: stack-out-of-bounds in ip6gre_tunnel_locate+0x334/0x860 net/ipv6/ip6_gre.c:339
Write of size 20 at addr ffff8801afb9f7b8 by task syzkaller851048/4466

CPU: 1 PID: 4466 Comm: syzkaller851048 Not tainted 4.16.0+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x1b9/0x29f lib/dump_stack.c:53
 print_address_description+0x6c/0x20b mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.7+0xac/0x2f5 mm/kasan/report.c:412
 check_memory_region_inline mm/kasan/kasan.c:260 [inline]
 check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
 memcpy+0x37/0x50 mm/kasan/kasan.c:303
 strlcpy include/linux/string.h:300 [inline]
 ip6gre_tunnel_locate+0x334/0x860 net/ipv6/ip6_gre.c:339
 ip6gre_tunnel_ioctl+0x69d/0x12e0 net/ipv6/ip6_gre.c:1195
 dev_ifsioc+0x43e/0xb90 net/core/dev_ioctl.c:334
 dev_ioctl+0x69a/0xcc0 net/core/dev_ioctl.c:525
 sock_ioctl+0x47e/0x680 net/socket.c:1015
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:500 [inline]
 do_vfs_ioctl+0x1cf/0x1650 fs/ioctl.c:684
 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701
 SYSC_ioctl fs/ioctl.c:708 [inline]
 SyS_ioctl+0x24/0x30 fs/ioctl.c:706
 do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x42/0xb7

Fixes: c12b395a ("gre: Support GRE over IPv6")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use dev_valid_name() to make sure user does not provide illegal
device name.

syzbot caught the following bug :

BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline]
BUG: KASAN: stack-out-of-bounds in ipip6_tunnel_locate+0x63b/0xaa0 net/ipv6/sit.c:254
Write of size 33 at addr ffff8801b64076d8 by task syzkaller932654/4453

CPU: 0 PID: 4453 Comm: syzkaller932654 Not tainted 4.16.0+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x1b9/0x29f lib/dump_stack.c:53
 print_address_description+0x6c/0x20b mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.7+0xac/0x2f5 mm/kasan/report.c:412
 check_memory_region_inline mm/kasan/kasan.c:260 [inline]
 check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
 memcpy+0x37/0x50 mm/kasan/kasan.c:303
 strlcpy include/linux/string.h:300 [inline]
 ipip6_tunnel_locate+0x63b/0xaa0 net/ipv6/sit.c:254
 ipip6_tunnel_ioctl+0xe71/0x241b net/ipv6/sit.c:1221
 dev_ifsioc+0x43e/0xb90 net/core/dev_ioctl.c:334
 dev_ioctl+0x69a/0xcc0 net/core/dev_ioctl.c:525
 sock_ioctl+0x47e/0x680 net/socket.c:1015
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:500 [inline]
 do_vfs_ioctl+0x1cf/0x1650 fs/ioctl.c:684
 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701
 SYSC_ioctl fs/ioctl.c:708 [inline]
 SyS_ioctl+0x24/0x30 fs/ioctl.c:706
 do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x42/0xb7

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use dev_valid_name() to make sure user does not provide illegal
device name.

syzbot caught the following bug :

BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline]
BUG: KASAN: stack-out-of-bounds in __ip_tunnel_create+0xca/0x6b0 net/ipv4/ip_tunnel.c:257
Write of size 20 at addr ffff8801ac79f810 by task syzkaller268107/4482

CPU: 0 PID: 4482 Comm: syzkaller268107 Not tainted 4.16.0+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x1b9/0x29f lib/dump_stack.c:53
 print_address_description+0x6c/0x20b mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.7+0xac/0x2f5 mm/kasan/report.c:412
 check_memory_region_inline mm/kasan/kasan.c:260 [inline]
 check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
 memcpy+0x37/0x50 mm/kasan/kasan.c:303
 strlcpy include/linux/string.h:300 [inline]
 __ip_tunnel_create+0xca/0x6b0 net/ipv4/ip_tunnel.c:257
 ip_tunnel_create net/ipv4/ip_tunnel.c:352 [inline]
 ip_tunnel_ioctl+0x818/0xd40 net/ipv4/ip_tunnel.c:861
 ipip_tunnel_ioctl+0x1c5/0x420 net/ipv4/ipip.c:350
 dev_ifsioc+0x43e/0xb90 net/core/dev_ioctl.c:334
 dev_ioctl+0x69a/0xcc0 net/core/dev_ioctl.c:525
 sock_ioctl+0x47e/0x680 net/socket.c:1015
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:500 [inline]
 do_vfs_ioctl+0x1cf/0x1650 fs/ioctl.c:684
 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701
 SYSC_ioctl fs/ioctl.c:708 [inline]
 SyS_ioctl+0x24/0x30 fs/ioctl.c:706
 do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x42/0xb7

Fixes: c5441932 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We want to use dev_valid_name() to validate tunnel names,
so better use strnlen(name, IFNAMSIZ) than strlen(name) to make
sure to not upset KASAN.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull char/misc updates from Greg KH:
 "Here is the big set of char/misc driver patches for 4.17-rc1.

  There are a lot of little things in here, nothing huge, but all
  important to the different hardware types involved:

   -  thunderbolt driver updates

   -  parport updates (people still care...)

   -  nvmem driver updates

   -  mei updates (as always)

   -  hwtracing driver updates

   -  hyperv driver updates

   -  extcon driver updates

   -  ... and a handful of even smaller driver subsystem and individual
      driver updates

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (149 commits)
  hwtracing: Add HW tracing support menu
  intel_th: Add ACPI glue layer
  intel_th: Allow forcing host mode through drvdata
  intel_th: Pick up irq number from resources
  intel_th: Don't touch switch routing in host mode
  intel_th: Use correct method of finding hub
  intel_th: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate
  stm class: Make dummy's master/channel ranges configurable
  stm class: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate
  MAINTAINERS: Bestow upon myself the care for drivers/hwtracing
  hv: add SPDX license id to Kconfig
  hv: add SPDX license to trace
  Drivers: hv: vmbus: do not mark HV_PCIE as perf_device
  Drivers: hv: vmbus: respect what we get from hv_get_synint_state()
  /dev/mem: Avoid overwriting "err" in read_mem()
  eeprom: at24: use SPDX identifier instead of GPL boiler-plate
  eeprom: at24: simplify the i2c functionality checking
  eeprom: at24: fix a line break
  eeprom: at24: tweak newlines
  eeprom: at24: refactor at24_probe()
  ...

Merge tag 'driver-core-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the "big" set of driver core patches for 4.17-rc1.

  There's really not much here, just a bunch of firmware code
  refactoring from Luis as he attempts to wrangle that codebase into
  something that is managable, along with a bunch of userspace tests for
  it. Other than that, a handful of small bugfixes and reverts of things
  that didn't work out.

  Full details are in the shortlog, it's not all that much.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (30 commits)
  drivers: base: remove check for callback in coredump_store()
  mt7601u: use firmware_request_cache() to address cache on reboot
  firmware: add firmware_request_cache() to help with cache on reboot
  firmware: fix typo on pr_info_once() when ignore_sysfs_fallback is used
  firmware: explicitly include vmalloc.h
  firmware: ensure the firmware cache is not used on incompatible calls
  test_firmware: modify custom fallback tests to use unique files
  firmware: add helper to check to see if fw cache is setup
  firmware: fix checking for return values for fw_add_devm_name()
  rename: _request_firmware_load() fw_load_sysfs_fallback()
  test_firmware: test three firmware kernel configs using a proc knob
  test_firmware: expand on library with shared helpers
  firmware: enable to force disable the fallback mechanism at run time
  firmware: enable run time change of forcing fallback loader
  firmware: move firmware loader into its own directory
  firmware: split firmware fallback functionality into its own file
  firmware: move loading timeout under struct firmware_fallback_config
  firmware: use helpers for setting up a temporary cache timeout
  firmware: simplify CONFIG_FW_LOADER_USER_HELPER_FALLBACK further
  drivers: base: add description for .coredump() callback
  ...

Pull staging/IIO updates from Greg KH:
 "Here is the big set of Staging/IIO driver patches for 4.17-rc1.

  It is a lot, over 500 changes, but not huge by previous kernel release
  standards. We deleted more lines than we added again (27k added vs.
  91k remvoed), thanks to finally being able to delete the IRDA drivers
  and networking code.

  We also deleted the ccree crypto driver, but that's coming back in
  through the crypto tree to you, in a much cleaned-up form.

  Added this round is at lot of "mt7621" device support, which is for an
  embedded device that Neil Brown cares about, and of course a handful
  of new IIO drivers as well.

  And finally, the fsl-mc core code moved out of the staging tree to the
  "real" part of the kernel, which is nice to see happen as well.

  Full details are in the shortlog, which has all of the tiny cleanup
  patches described.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (579 commits)
  staging: rtl8723bs: Remove yield call, replace with cond_resched()
  staging: rtl8723bs: Replace yield() call with cond_resched()
  staging: rtl8723bs: Remove unecessary newlines from 'odm.h'.
  staging: rtl8723bs: Rework 'struct _ODM_Phy_Status_Info_' coding style.
  staging: rtl8723bs: Rework 'struct _ODM_Per_Pkt_Info_' coding style.
  staging: rtl8723bs: Replace NULL pointer comparison with '!'.
  staging: rtl8723bs: Factor out rtl8723bs_recv_tasklet() sections.
  staging: rtl8723bs: Fix function signature that goes over 80 characters.
  staging: rtl8723bs: Fix lines too long in update_recvframe_attrib().
  staging: rtl8723bs: Remove unnecessary blank lines in 'rtl8723bs_recv.c'.
  staging: rtl8723bs: Change camel case to snake case in 'rtl8723bs_recv.c'.
  staging: rtl8723bs: Add missing braces in else statement.
  staging: rtl8723bs: Add spaces around ternary operators.
  staging: rtl8723bs: Fix lines with trailing open parentheses.
  staging: rtl8723bs: Remove unnecessary length #define's.
  staging: rtl8723bs: Fix IEEE80211 authentication algorithm constants.
  staging: rtl8723bs: Fix alignment in rtw_wx_set_auth().
  staging: rtl8723bs: Remove braces from single statement conditionals.
  staging: rtl8723bs: Remove unecessary braces from switch statement.
  staging: rtl8723bs: Fix newlines in rtw_wx_set_auth().
  ...

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver patches for 4.17-rc1

  Not all that big really, most are just small fixes and additions to
  existing drivers. There's a bunch of work on the imx serial driver
  recently for some reason, and a new embedded serial driver added as
  well.

  Full details are in the shortlog.

  All of these have been in the linux-next tree for a while with no
  reported issues"

* tag 'tty-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (66 commits)
  serial: expose buf_overrun count through proc interface
  serial: mvebu-uart: fix tx lost characters
  tty: serial: msm_geni_serial: Fix return value check in qcom_geni_serial_probe()
  tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP
  8250-men-mcb: add support for 16z025 and 16z057
  powerpc: Mark the variable earlycon_acpi_spcr_enable maybe_unused
  serial: stm32: fix initialization of RS485 mode
  ARM: dts: STi: Remove "console=ttyASN" from bootargs for STi boards
  vt: change SGR 21 to follow the standards
  serdev: Fix typo in serdev_device_alloc
  ARM: dts: STi: Fix aliases property name for STi boards
  tty: st-asc: Update tty alias
  serial: stm32: add support for RS485 hardware control mode
  dt-bindings: serial: stm32: add RS485 optional properties
  selftests: add devpts selftests
  devpts: comment devpts_mntget()
  devpts: resolve devpts bind-mounts
  devpts: hoist out check for DEVPTS_SUPER_MAGIC
  serial: 8250: Add Nuvoton NPCM UART
  serial: mxs-auart: disable clks of Alphascale ASM9260
  ...

Pull USB/PHY updates from Greg KH:
 "Here is the big set of USB and PHY driver patches for 4.17-rc1.

  Lots of USB typeC work happened this round, with code moving from the
  staging directory into the "real" part of the kernel, as well as new
  infrastructure being added to be able to handle the different types of
  "roles" that typeC requires.

  There is also the normal huge set of USB gadget controller and driver
  updates, along with XHCI changes, and a raft of other tiny fixes all
  over the USB tree. And the PHY driver updates are merged in here as
  well as they interacted with the USB drivers in some places.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (250 commits)
  Revert "USB: serial: ftdi_sio: add Id for Physik Instrumente E-870"
  usb: musb: gadget: misplaced out of bounds check
  usb: chipidea: imx: Fix ULPI on imx53
  usb: chipidea: imx: Cleanup ci_hdrc_imx_platform_flag
  usb: chipidea: usbmisc: small clean up
  usb: chipidea: usbmisc: evdo can be set e/o reset
  usb: chipidea: usbmisc: evdo is only specific to OTG port
  USB: serial: ftdi_sio: add Id for Physik Instrumente E-870
  usb: dwc3: gadget: never call ->complete() from ->ep_queue()
  usb: gadget: udc: core: update usb_ep_queue() documentation
  usb: host: Remove the deprecated ATH79 USB host config options
  usb: roles: Fix return value check in intel_xhci_usb_probe()
  USB: gadget: f_midi: fixing a possible double-free in f_midi
  usb: core: Add USB_QUIRK_DELAY_CTRL_MSG to usbcore quirks
  usb: core: Copy parameter string correctly and remove superfluous null check
  USB: announce bcdDevice as well as idVendor, idProduct.
  USB:fix USB3 devices behind USB3 hubs not resuming at hibernate thaw
  usb: hub: Reduce warning to notice on power loss
  USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator
  USB: serial: cp210x: add ELDAT Easywave RX09 id
  ...

Pull networking fixes from David Miller:
 "This fixes some fallout from the net-next merge the other day, plus
  some non-merge-window-related bug fixes:

  1) Fix sparse warnings in bcmgenet, systemport, b53, and mt7530
     (Florian Fainelli)

  2) pptp does a bogus dst_release() on a route we have a single
     refcount on, and attached to a socket, which needs that refcount
     (Eric Dumazet)

  3) UDP connected sockets on ipv6 can race with route update handling,
     resulting in a pre-PMTU update route still stuck on the socket and
     thus continuing to get ICMPV6_PKT_TOOBIG errors. We end up never
     seeing the updated route. (Alexey Kodanev)

  4) Missing list initializer(s) in TIPC (Jon Maloy)

  5) Connect phy early to prevent crashes in lan78xx driver (Alexander
     Graf)

  6) Fix build with modular NVMEM (Arnd Bergmann)

  7) netdevsim canot mark nsim_devlink_net_ops and nsim_fib_net_ops as
     __net_initdata, as these are references from module unload
     unconditionally (Arnd Bergmann)"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (23 commits)
  netdevsim: remove incorrect __net_initdata annotations
  sfc: remove ctpio_dmabuf_start from stats
  inet: frags: fix ip6frag_low_thresh boundary
  tipc: Fix namespace violation in tipc_sk_fill_sock_diag
  net: avoid unneeded atomic operation in ip*_append_data()
  nvmem: disallow modular CONFIG_NVMEM
  net: hns3: fix length overflow when CONFIG_ARM64_64K_PAGES
  nfp: use full 40 bits of the NSP buffer address
  lan78xx: Connect phy early
  nfp: add a separate counter for packets with CHECKSUM_COMPLETE
  tipc: Fix missing list initializations in struct tipc_subscription
  ipv6: udp: set dst cache for a connected sk if current not valid
  ipv6: udp: convert 'connected' to bool type in udpv6_sendmsg()
  ipv6: allow to cache dst for a connected sk in ip6_sk_dst_lookup_flow()
  ipv6: add a wrapper for ip6_dst_store() with flowi6 checks
  net: phy: marvell10g: add thermal hwmon device
  pptp: remove a buggy dst release in pptp_connect()
  net: dsa: mt7530: Use NULL instead of plain integer
  net: dsa: b53: Fix sparse warnings in b53_mmap.c
  af_unix: remove redundant lockdep class
  ...

Pull crypto updates from Herbert Xu:
 "API:

   - add AEAD support to crypto engine

   - allow batch registration in simd

  Algorithms:

   - add CFB mode

   - add speck block cipher

   - add sm4 block cipher

   - new test case for crct10dif

   - improve scheduling latency on ARM

   - scatter/gather support to gcm in aesni

   - convert x86 crypto algorithms to skcihper

  Drivers:

   - hmac(sha224/sha256) support in inside-secure

   - aes gcm/ccm support in stm32

   - stm32mp1 support in stm32

   - ccree driver from staging tree

   - gcm support over QI in caam

   - add ks-sa hwrng driver"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (212 commits)
  crypto: ccree - remove unused enums
  crypto: ahash - Fix early termination in hash walk
  crypto: brcm - explicitly cast cipher to hash type
  crypto: talitos - don't leak pointers to authenc keys
  crypto: qat - don't leak pointers to authenc keys
  crypto: picoxcell - don't leak pointers to authenc keys
  crypto: ixp4xx - don't leak pointers to authenc keys
  crypto: chelsio - don't leak pointers to authenc keys
  crypto: caam/qi - don't leak pointers to authenc keys
  crypto: caam - don't leak pointers to authenc keys
  crypto: lrw - Free rctx->ext with kzfree
  crypto: talitos - fix IPsec cipher in length
  crypto: Deduplicate le32_to_cpu_array() and cpu_to_le32_array()
  crypto: doc - clarify hash callbacks state machine
  crypto: api - Keep failed instances alive
  crypto: api - Make crypto_alg_lookup static
  crypto: api - Remove unused crypto_type lookup function
  crypto: chelsio - Remove declaration of static function from header
  crypto: inside-secure - hmac(sha224) support
  crypto: inside-secure - hmac(sha256) support
  ..

Merge tag 'riscv-for-linus-4.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V updates from Palmer Dabbelt:
 "This contains the new features we'd like to incorporate into the
  RISC-V port for 4.17. We might have a bit more stuff land later in the
  merge window, but I wanted to get this out earlier just so everyone
  can see where we currently stand.

  A short summary of the changes is:

   - We've added support for dynamic ftrace on RISC-V targets.

   - There have been a handful of cleanups to our atomic and locking
     routines. They now more closely match the released RISC-V memory
     model draft.

   - Our module loading support has been cleaned up and is now enabled
     by default, despite some limitations still existing.

   - A patch to define COMMANDLINE_FORCE instead of COMMANDLINE_OVERRIDE
     so the generic device tree code picks up handling all our command
     line stuff.

  There's more information in the merge commits for each patch set"

* tag 'riscv-for-linus-4.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: (21 commits)
  RISC-V: Rename CONFIG_CMDLINE_OVERRIDE to CONFIG_CMDLINE_FORCE
  RISC-V: Add definition of relocation types
  RISC-V: Enable module support in defconfig
  RISC-V: Support SUB32 relocation type in kernel module
  RISC-V: Support ADD32 relocation type in kernel module
  RISC-V: Support ALIGN relocation type in kernel module
  RISC-V: Support RVC_BRANCH/JUMP relocation type in kernel modulewq
  RISC-V: Support HI20/LO12_I/LO12_S relocation type in kernel module
  RISC-V: Support CALL relocation type in kernel module
  RISC-V: Support GOT_HI20/CALL_PLT relocation type in kernel module
  RISC-V: Add section of GOT.PLT for kernel module
  RISC-V: Add sections of PLT and GOT for kernel module
  riscv/atomic: Strengthen implementations with fences
  riscv/spinlock: Strengthen implementations with fences
  riscv/barrier: Define __smp_{store_release,load_acquire}
  riscv/ftrace: Add HAVE_FUNCTION_GRAPH_RET_ADDR_PTR support
  riscv/ftrace: Add DYNAMIC_FTRACE_WITH_REGS support
  riscv/ftrace: Add ARCH_SUPPORTS_FTRACE_OPS support
  riscv/ftrace: Add dynamic function graph tracer support
  riscv/ftrace: Add dynamic function tracer support
  ...

Pull arm64 updates from Will Deacon:
 "Nothing particularly stands out here, probably because people were
  tied up with spectre/meltdown stuff last time around. Still, the main
  pieces are:

   - Rework of our CPU features framework so that we can whitelist CPUs
     that don't require kpti even in a heterogeneous system

   - Support for the IDC/DIC architecture extensions, which allow us to
     elide instruction and data cache maintenance when writing out
     instructions

   - Removal of the large memory model which resulted in suboptimal
     codegen by the compiler and increased the use of literal pools,
     which could potentially be used as ROP gadgets since they are
     mapped as executable

   - Rework of forced signal delivery so that the siginfo_t is
     well-formed and handling of show_unhandled_signals is consolidated
     and made consistent between different fault types

   - More siginfo cleanup based on the initial patches from Eric
     Biederman

   - Workaround for Cortex-A55 erratum #1024718

   - Some small ACPI IORT updates and cleanups from Lorenzo Pieralisi

   - Misc cleanups and non-critical fixes"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (70 commits)
  arm64: uaccess: Fix omissions from usercopy whitelist
  arm64: fpsimd: Split cpu field out from struct fpsimd_state
  arm64: tlbflush: avoid writing RES0 bits
  arm64: cmpxchg: Include linux/compiler.h in asm/cmpxchg.h
  arm64: move percpu cmpxchg implementation from cmpxchg.h to percpu.h
  arm64: cmpxchg: Include build_bug.h instead of bug.h for BUILD_BUG
  arm64: lse: Include compiler_types.h and export.h for out-of-line LL/SC
  arm64: fpsimd: include <linux/init.h> in fpsimd.h
  drivers/perf: arm_pmu_platform: do not warn about affinity on uniprocessor
  perf: arm_spe: include linux/vmalloc.h for vmap()
  Revert "arm64: Revert L1_CACHE_SHIFT back to 6 (64-byte cache line size)"
  arm64: cpufeature: Avoid warnings due to unused symbols
  arm64: Add work around for Arm Cortex-A55 Erratum 1024718
  arm64: Delay enabling hardware DBM feature
  arm64: Add MIDR encoding for Arm Cortex-A55 and Cortex-A35
  arm64: capabilities: Handle shared entries
  arm64: capabilities: Add support for checks based on a list of MIDRs
  arm64: Add helpers for checking CPU MIDR against a range
  arm64: capabilities: Clean up midr range helpers
  arm64: capabilities: Change scope of VHE to Boot CPU feature
  ...

Pull irq updates from Thomas Gleixner:
 "The usual pile of boring changes:

   - Consolidate tasklet functions to share code instead of duplicating
     it

   - The first step for making the low level entry handler management on
     multi-platform kernels generic

   - A new sysfs file which allows to retrieve the wakeup state of
     interrupts.

   - Ensure that the interrupt thread follows the effective affinity and
     not the programmed affinity to avoid cross core wakeups.

   - Two new interrupt controller drivers (Microsemi Ocelot and Qualcomm
     PDC)

   - Fix the wakeup path clock handling for Reneasas interrupt chips.

   - Rework the boot time register reset for ARM GIC-V2/3

   - Better suspend/resume support for ARM GIV-V3/ITS

   - Add missing locking to the ARM GIC set_type() callback

   - Small fixes for the irq simulator code

   - SPDX identifiers for the irq core code and removal of boiler plate

   - Small cleanups all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
  openrisc: Set CONFIG_MULTI_IRQ_HANDLER
  arm64: Set CONFIG_MULTI_IRQ_HANDLER
  genirq: Make GENERIC_IRQ_MULTI_HANDLER depend on !MULTI_IRQ_HANDLER
  irqchip/gic: Take lock when updating irq type
  irqchip/gic: Update supports_deactivate static key to modern api
  irqchip/gic-v3: Ensure GICR_CTLR.EnableLPI=0 is observed before enabling
  irqchip: Add a driver for the Microsemi Ocelot controller
  dt-bindings: interrupt-controller: Add binding for the Microsemi Ocelot interrupt controller
  irqchip/gic-v3: Probe for SCR_EL3 being clear before resetting AP0Rn
  irqchip/gic-v3: Don't try to reset AP0Rn
  irqchip/gic-v3: Do not check trigger configuration of partitionned LPIs
  genirq: Remove license boilerplate/references
  genirq: Add missing SPDX identifiers
  genirq/matrix: Cleanup SPDX identifier
  genirq: Cleanup top of file comments
  genirq: Pass desc to __irq_free instead of irq number
  irqchip/gic-v3: Loudly complain about the use of IRQ_TYPE_NONE
  irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE
  RISC-V: Move to the new GENERIC_IRQ_MULTI_HANDLER handler
  genirq: Add CONFIG_GENERIC_IRQ_MULTI_HANDLER
  ...

Pull time(r) updates from Thomas Gleixner:
 "A small set of updates for timers and timekeeping:

   - The most interesting change is the consolidation of clock MONOTONIC
     and clock BOOTTIME.

     Clock MONOTONIC behaves now exactly like clock BOOTTIME and does
     not longer ignore the time spent in suspend. A new clock
     MONOTONIC_ACTIVE is provived which behaves like clock MONOTONIC in
     kernels before this change. This allows applications to
     programmatically check for the clock MONOTONIC behaviour.

     As discussed in the review thread, this has the potential of
     breaking user space and we might have to revert this. Knock on wood
     that we can avoid that exercise.

   - Updates to the NTP mechanism to improve accuracy

   - A new kernel internal data structure to aid the ongoing Y2038 work.

   - Cleanups and simplifications of the clocksource code.

   - Make the alarmtimer code play nicely with debugobjects"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  alarmtimer: Init nanosleep alarm timer on stack
  y2038: Introduce struct __kernel_old_timeval
  tracing: Unify the "boot" and "mono" tracing clocks
  hrtimer: Unify MONOTONIC and BOOTTIME clock behavior
  posix-timers: Unify MONOTONIC and BOOTTIME clock behavior
  timekeeping: Remove boot time specific code
  Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior
  timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock
  timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock
  timekeeping/ntp: Determine the multiplier directly from NTP tick length
  timekeeping/ntp: Don't align NTP frequency adjustments to ticks
  clocksource: Use ATTRIBUTE_GROUPS
  clocksource: Use DEVICE_ATTR_RW/RO/WO to define device attributes
  clocksource: Don't walk the clocksource list for empty override

Pull /dev/random updates from Ted Ts'o:
 "A few random (cough, cough) cleanups for the /dev/random driver"

* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  drivers/char/random.c: remove unused dont_count_entropy
  random: optimize add_interrupt_randomness
  random: always fill buffer in get_random_bytes_wait
  random: use a tighter cap in credit_entropy_bits_safe()

Pull ext4 updates from Ted Ts'o:
 "Cleanups and bugfixes for ext4, including some fixes to make ext4 more
  robust against maliciously crafted file system images.

  (I still don't recommend that container folks hold any delusions that
  mounting arbitary images that can be crafted by malicious attackers
  should be considered sane thing to do, though!)"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (29 commits)
  ext4: force revalidation of directory pointer after seekdir(2)
  ext4: add extra checks to ext4_xattr_block_get()
  ext4: add bounds checking to ext4_xattr_find_entry()
  ext4: move call to ext4_error() into ext4_xattr_check_block()
  ext4: don't show data=<mode> option if defaulted
  ext4: omit init_itable=n in procfs when disabled
  ext4: show more binary mount options in procfs
  ext4: simplify kobject usage
  ext4: remove unused parameters in sysfs code
  ext4: null out kobject* during sysfs cleanup
  ext4: don't allow r/w mounts if metadata blocks overlap the superblock
  ext4: always initialize the crc32c checksum driver
  ext4: fail ext4_iget for root directory if unallocated
  ext4: limit xattr size to INT_MAX
  ext4: add validity checks for bitmap block numbers
  ext4: fix comments in ext4_swap_extents()
  ext4: use generic_writepages instead of __writepage/write_cache_pages
  ext4: don't complain about incorrect features when probing
  ext4: remove EXT4_STATE_DIOREAD_LOCK flag
  ext4: fix offset overflow on 32-bit archs in ext4_iomap_begin()
  ...

Pull cifs updates from Steve French:
 "Includes SMB3.11 security improvements, as well as various fixes for
  stable and some debugging improvements"

* tag '4.17-SMB3-Fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Add minor debug message during negprot
  smb3: Fix root directory when server returns inode number of zero
  cifs: fix sparse warning on previous patch in a few printks
  cifs: add server->vals->header_preamble_size
  cifs: smbd: disconnect transport on RDMA errors
  cifs: smbd: avoid reconnect lockup
  Don't log confusing message on reconnect by default
  Don't log expected error on DFS referral request
  fs: cifs: Replace _free_xid call in cifs_root_iget function
  SMB3.1.1 dialect is no longer experimental
  Tree connect for SMB3.1.1 must be signed for non-encrypted shares
  fix smb3-encryption breakage when CONFIG_DEBUG_SG=y
  CIFS: fix sha512 check in cifs_crypto_secmech_release
  CIFS: implement v3.11 preauth integrity
  CIFS: add sha512 secmech
  CIFS: refactor crypto shash/sdesc allocation&free
  Update README file for cifs.ko
  Update TODO list for cifs.ko
  cifs: fix memory leak in SMB2_open()
  CIFS: SMBD: fix spelling mistake: "faield" and "legnth"

Pull gfs2 updates from Bob Peterson:
 "We've only got nine GFS2 patches for this merge window:

   - report journal recovery times more accurately during journal replay
     (Abhi Das)

   - fix fallocate chunk size (Andreas Gruenbacher)

   - correctly dirty inodes during rename (Andreas Gruenbacher)

   - improve the comment for function gfs2_block_map (Andreas
     Gruenbacher)

   - improve kernel trace point iomap end: The physical block address
     was added (Andreas Gruenbacher)

   - fix a nasty file system corruption bug that surfaced in xfstests
     476 in punch-hole/truncate (Andreas Gruenbacher)

   - fix a problem Christoph Helwig pointed out, namely, that GFS2 was
     misusing the IOMAP_ZERO flag. The zeroing of new blocks was moved
     to the proper fallocate code (Andreas Gruenbacher)

   - declare function gfs2_remove_from_ail as static (Bob Peterson)

   - only set PageChecked for jdata page writes (Bob Peterson)"

* tag 'gfs2-4.17.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: time journal recovery steps accurately
  gfs2: Zero out fallocated blocks in fallocate_chunk
  gfs2: Check for the end of metadata in punch_hole
  gfs2: gfs2_iomap_end tracepoint: log block address
  gfs2: Improve gfs2_block_map comment
  GFS2: Only set PageChecked for jdata pages
  GFS2: Make function gfs2_remove_from_ail static
  gfs2: Dirty source inode during rename
  gfs2: Fix fallocate chunk size

Pull btrfs updates from David Sterba:
 "There are a several user visible changes, the rest is mostly invisible
  and continues to clean up the whole code base.

  User visible changes:
   - new mount option nossd_spread (pair for ssd_spread)

   - mount option subvolid will detect junk after the number and fail
     the mount

   - add message after cancelled device replace

   - direct module dependency on libcrc32, removed own crc wrappers

   - removed user space transaction ioctls

   - use lighter locking when reading /proc/self/mounts, RCU instead of
     mutex to avoid unnecessary contention

  Enhancements:
   - skip writeback of last page when truncating file to same size

   - send: do not issue unnecessary truncate operations

   - mount option token specifiers: use %u for unsigned values, more
     validation

   - selftests: more tree block validations

  qgroups:
   - preparatory work for splitting reservation types for data and
     metadata, this should allow for more accurate tracking and fix some
     issues with underflows or do further enhancements

   - split metadata reservations for started and joined transaction so
     they do not get mixed up and are accounted correctly at commit time

   - with the above, it's possible to revert patch that potentially
     deadlocks when trying to make more space by explicitly committing
     when the quota limit is hit

   - fix root item corruption when multiple same source snapshots are
     created with quota enabled

  RAID56:
   - make sure target is identical to source when raid56 rebuild fails
     after dev-replace

   - faster rebuild during scrub, batch by stripes and not
     block-by-block

   - make more use of cached data when rebuilding from a missing device

  Fixes:
   - null pointer deref when device replace target is missing

   - fix fsync after hole punching when using no-holes feature

   - fix lockdep splat when allocating percpu data with wrong GFP flags

  Cleanups, refactoring, core changes:
   - drop redunant parameters from various functions

   - kill and opencode trivial helpers

   - __cold/__exit function annotations

   - dead code removal

   - continued audit and documentation of memory barriers

   - error handling: handle removal from uuid tree

   - error handling: remove handling of impossible condtitons

   - more debugging or error messages

   - updated tracepoints

   - one VLA use removal (and one still left)"

* tag 'for-4.17-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (164 commits)
  btrfs: lift errors from add_extent_changeset to the callers
  Btrfs: print error messages when failing to read trees
  btrfs: user proper type for btrfs_mask_flags flags
  btrfs: split dev-replace locking helpers for read and write
  btrfs: remove stale comments about fs_mutex
  btrfs: use RCU in btrfs_show_devname for device list traversal
  btrfs: update barrier in should_cow_block
  btrfs: use lockdep_assert_held for mutexes
  btrfs: use lockdep_assert_held for spinlocks
  btrfs: Validate child tree block's level and first key
  btrfs: tests/qgroup: Fix wrong tree backref level
  Btrfs: fix copy_items() return value when logging an inode
  Btrfs: fix fsync after hole punching when using no-holes feature
  btrfs: use helper to set ulist aux from a qgroup
  Revert "btrfs: qgroups: Retry after commit on getting EDQUOT"
  btrfs: qgroup: Update trace events for metadata reservation
  btrfs: qgroup: Use root::qgroup_meta_rsv_* to record qgroup meta reserved space
  btrfs: delayed-inode: Use new qgroup meta rsv for delayed inode and item
  btrfs: qgroup: Use separate meta reservation type for delalloc
  btrfs: qgroup: Introduce function to convert META_PREALLOC into META_PERTRANS
  ...

Pull xfs updates from Darrick Wong:
 "Here's the first round of fixes for XFS for 4.17.

  The biggest new features this time around are the addition of lazytime
  support, further enhancement of the on-disk inode metadata verifiers,
  and a patch to smooth over some of the AGFL padding problems that have
  intermittently plagued users since 4.5. I forsee sending a second pull
  request next week with further bug fixes and speedups in the online
  scrub code and elsewhere.

  This series has been run through a full xfstests run over the weekend
  and through a quick xfstests run against this morning's master, with
  no major failures reported.

  Summary of changes for this release:

   - Various cleanups and code fixes

   - Implement lazytime as a mount option

   - Convert various on-disk metadata checks from asserts to -EFSCORRUPTED

   - Fix accounting problems with the rmap per-ag reservations

   - Refactorings and cleanups for xfs_log_force

   - Various bugfixes for the reflink code

   - Work around v5 AGFL padding problems to prevent fs shutdowns

   - Establish inode fork verifiers to inspect on-disk metadata
     correctness

   - Various online scrub fixes

   - Fix v5 swapext blowing up on deleted inodes"

* tag 'xfs-4.17-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (49 commits)
  xfs: do not log/recover swapext extent owner changes for deleted inodes
  xfs: clean up xfs_mount allocation and dynamic initializers
  xfs: remove dead inode version setting code
  xfs: catch inode allocation state mismatch corruption
  xfs: xfs_scrub_iallocbt_xref_rmap_inodes should use xref_set_corrupt
  xfs: flag inode corruption if parent ptr doesn't get us a real inode
  xfs: don't accept inode buffers with suspicious unlinked chains
  xfs: move inode extent size hint validation to libxfs
  xfs: record inode buf errors as a xref error in inobt scrubber
  xfs: remove xfs_buf parameter from inode scrub methods
  xfs: inode scrubber shouldn't bother with raw checks
  xfs: bmap scrubber should do rmap xref with bmap for sparse files
  xfs: refactor inode buffer verifier error logging
  xfs: refactor inode verifier error logging
  xfs: refactor bmap record validation
  xfs: sanity-check the unused space before trying to use it
  xfs: detect agfl count corruption and reset agfl
  xfs: unwind the try_again loop in xfs_log_force
  xfs: refactor xfs_log_force_lsn
  xfs: minor cleanup for xfs_reflink_end_cow
  ...

Pull vfs dcache updates from Al Viro:
 "Part of this is what the trylock loop elimination series has turned
  into, part making d_move() preserve the parent (and thus the path) of
  victim, plus some general cleanups"

* 'work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (22 commits)
  d_genocide: move export to definition
  fold dentry_lock_for_move() into its sole caller and clean it up
  make non-exchanging __d_move() copy ->d_parent rather than swap them
  oprofilefs: don't oops on allocation failure
  lustre: get rid of pointless casts to struct dentry *
  debugfs_lookup(): switch to lookup_one_len_unlocked()
  fold lookup_real() into __lookup_hash()
  take out orphan externs (empty_string/slash_string)
  split d_path() and friends into a separate file
  dcache.c: trim includes
  fs/dcache: Avoid a try_lock loop in shrink_dentry_list()
  get rid of trylock loop around dentry_kill()
  handle move to LRU in retain_dentry()
  dput(): consolidate the "do we need to retain it?" into an inlined helper
  split the slow part of lock_parent() off
  now lock_parent() can't run into killed dentry
  get rid of trylock loop in locking dentries on shrink list
  d_delete(): get rid of trylock loop
  fs/dcache: Move dentry_kill() below lock_parent()
  fs/dcache: Remove stale comment from dentry_kill()
  ...

The __net_initdata section cannot currently be used for structures that
get cleaned up in an exitcall using unregister_pernet_operations:

WARNING: vmlinux.o(.text+0x868c34): Section mismatch in reference from the function nsim_devlink_exit() to the (unknown reference) .init.data:(unknown)
The function nsim_devlink_exit() references
the (unknown reference) __initdata (unknown).
This is often because nsim_devlink_exit lacks a __initdata
annotation or the annotation of (unknown) is wrong.
WARNING: vmlinux.o(.text+0x868c64): Section mismatch in reference from the function nsim_devlink_init() to the (unknown reference) .init.data:(unknown)
WARNING: vmlinux.o(.text+0x8692bc): Section mismatch in reference from the function nsim_fib_exit() to the (unknown reference) .init.data:(unknown)
WARNING: vmlinux.o(.text+0x869300): Section mismatch in reference from the function nsim_fib_init() to the (unknown reference) .init.data:(unknown)

As that warning tells us, discarding the structure after a module is
loaded would lead to a undefined behavior when that module is removed.

It might be possible to change that annotation so it has no effect for
loadable modules, but I have not figured out exactly how to do that, and
we want this to be fixed in -rc1.

This just removes the annotations, just like we do for all other such
modules.

Fixes: 37923ed6 ("netdevsim: Add simple FIB resource controller via devlink")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ctpio_dmabuf_start entry is not actually a stat and shouldn't
be exposed to ethtool.

Fixes: 2c0b6ee8 ("sfc: expose CTPIO stats on NICs that support them")
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>