- 20 Nov, 2008 1 commit
-
-
Steve French authored
If a connection with open file handles has gone down and come back up and reconnected without reopening the file handle yet, do not attempt to send an SMB close request for this handle in cifs_close. We were checking for the connection being invalid in cifs_close but since the connection may have been reconnected we also need to check whether the file handle was marked invalid (otherwise we could close the wrong file handle by accident). Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
-
- 18 Nov, 2008 4 commits
-
-
Steve French authored
This was recently changed to check for need_reconnect, but should actually be a check for a tidStatus of CifsExiting. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: prevent cifs_writepages() from skipping unwritten pages Fixed parsing of mount options when doing DFS submount [CIFS] Fix check for tcon seal setting and fix oops on failed mount from earlier patch [CIFS] Fix build break cifs: reinstate sharing of tree connections [CIFS] minor cleanup to cifs_mount cifs: reinstate sharing of SMB sessions sans races cifs: disable sharing session and tcon and add new TCP sharing code [CIFS] clean up server protocol handling [CIFS] remove unused list, add new cifs sock list to prepare for mount/umount fix [CIFS] Fix cifs reconnection flags [CIFS] Can't rely on iov length and base when kernel_recvmsg returns error
-
Dave Kleikamp authored
Fixes a data corruption under heavy stress in which pages could be left dirty after all open instances of a inode have been closed. In order to write contiguous pages whenever possible, cifs_writepages() asks pagevec_lookup_tag() for more pages than it may write at one time. Normally, it then resets index just past the last page written before calling pagevec_lookup_tag() again. If cifs_writepages() can't write the first page returned, it wasn't resetting index, and the next call to pagevec_lookup_tag() resulted in skipping all of the pages it previously returned, even though cifs_writepages() did nothing with them. This can result in data loss when the file descriptor is about to be closed. This patch ensures that index gets set back to the next returned page so that none get skipped. Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Acked-by: Jeff Layton <jlayton@redhat.com> Cc: Shirish S Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
-
Igor Mammedov authored
Since these hit the same routines, and are relatively small, it is easier to review them as one patch. Fixed incorrect handling of the last option in some cases Fixed prefixpath handling convert path_consumed into host depended string length (in bytes) Use non default separator if it is provided in the original mount options Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Igor Mammedov <niallain@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
-
- 17 Nov, 2008 12 commits
-
-
Kumar Gala authored
For some unknown reason at Steven Rostedt added in disabling of the SPE instruction generation for e500 based PPC cores in commit 6ec56232. We are removing it because: 1. It generates e500 kernels that don't work 2. its not the correct set of flags to do this 3. we handle this in the arch/powerpc/Makefile already 4. its unknown in talking to Steven why he did this Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Tested-and-Acked-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.o-hand.com/linux-mfdLinus Torvalds authored
* 'for-linus' of git://git.o-hand.com/linux-mfd: mfd: Correct WM8350 I2C return code usage mfd: fix event masking for da9030
-
Steve French authored
set tcon->ses earlier If the inital tree connect fails, we'll end up calling cifs_put_smb_ses with a NULL pointer. Fix it by setting the tcon->ses earlier. Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: rtc: rtc-sun4v fixes, revised sparc: Fix tty compile warnings. sparc: struct device - replace bus_id with dev_name(), dev_set_name()
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits) rtnetlink: propagate error from dev_change_flags in do_setlink() isdn: remove extra byteswap in isdn_net_ciscohdlck_slarp_send_reply Phonet: refuse to send bigger than MTU packets e1000e: fix IPMI traffic e1000e: fix warn_on reload after phy_id error phy: fix phy address bug e100: fix dma error in direction for mapping igb: use dev_printk instead of printk qla3xxx: Cleanup: Fix link print statements. igb: Use device_set_wakeup_enable e1000: Use device_set_wakeup_enable e1000e: Use device_set_wakeup_enable via-velocity: enable perfect filtering for multicast packets phy: Add support for Marvell 88E1118 PHY mlx4_en: Pause parameters per port phylib: fix premature freeing of struct mii_bus atl1: Do not enumerate options unsupported by chip atl1e: fix broken multicast by removing unnecessary crc inversion gianfar: Fix DMA unmap invocations net/ucc_geth: Fix oops in uec_get_ethtool_stats() ...
-
Johannes Berg authored
Unlike ifconfig, iproute doesn't report an error when setting an interface up fails: (example: put wireless network mac80211 interface into repeater mode with iwconfig but do not set a peer MAC address, it should fail with -ENOLINK) without patch: # ip link set wlan0 up ; echo $? 0 # with patch: # ip link set wlan0 up ; echo $? RTNETLINK answers: Link has been severed 2 # Propagate the return value from dev_change_flags() to fix this. Signed-off-by: Patrick McHardy <kaber@trash.net> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Harvey Harrison authored
commit a144ea4b [IPV4]: annotate struct in_ifaddr Missed this extra byteswap as the isdn inlines hide the htonl inside put_u32 which causes an extra byteswap on little-endian arches. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steve French authored
Signed-off-by: Steve French <sfrench@us.ibm.com>
-
Rémi Denis-Courmont authored
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jeff Layton authored
Use a similar approach to the SMB session sharing. Add a list of tcons attached to each SMB session. Move the refcount to non-atomic. Protect all of the above with the cifs_tcp_ses_lock. Add functions to properly find and put references to the tcons. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
-
Jeff Kirsher authored
Some users reported that they have machines with BMCs enabled that cannot receive IPMI traffic after e1000e is loaded. http://marc.info/?l=e1000-devel&m=121909039127414&w=2 http://marc.info/?l=e1000-devel&m=121365543823387&w=2 This fixes the issue if they load with the new parameter = 0 by disabling crc stripping, but leaves the performance feature on for most users. Based on work done by Hong Zhang. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jeff Kirsher authored
If the driver fails to initialize the first time due to the failure in the phy_id check the kernel triggers a warn_on on the second try to load the driver because the driver did not free the msi/x resources in the first load because of the previous failure in phy_id check. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 16 Nov, 2008 16 commits
-
-
Helge Deller authored
Fix an unitialized return value when compiling on parisc (with CONFIG_UNEVICTABLE_LRU=y): mm/mlock.c: In function `__mlock_vma_pages_range': mm/mlock.c:165: warning: `ret' might be used uninitialized in this function Signed-off-by: Helge Deller <deller@gmx.de> [ It isn't ever really used uninitialized, since no caller should ever call this function with an empty range. But the compiler is correct that from a local analysis standpoint that is impossible to see, and fixing the warning is appropriate. ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Rusty Russell authored
Bug #11989: Suspend failure on NForce4-based boards due to chanes in stop_machine We should not access active.fnret outside the lock; in theory the next stop_machine could overwrite it. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Tested-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Al Viro authored
D'oh... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Reported-and-tested-by: Peter Palfrader <peter@palfrader.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mark Brown authored
The vendor BSP used for the WM8350 development provided an I2C driver which incorrectly returned zero on succesful sends rather than the number of transmitted bytes, an error which was then propagated into the WM8350 I2C accessors. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
-
Mike Rapoport authored
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
-
Linus Torvalds authored
Commit 0794469d: ("ACPI: struct device - replace bus_id with dev_name(), dev_set_name()") introduced a bug by testing 'dev_name(ldev)' instead of 'ldev->bus' for NULL when printing out the bus information. So if ldev->bus was NULL, we'd oops. Reported-and-tested-by: Bruno Prmont <bonbons@linux-vserver.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Len Brown <len.brown@intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Giulio Benetti authored
PHYID returns 0xffff and not 0xffffffff when not found and in some case(at91sam9263) 0x0. Maybe this patch could be useful. Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesse Brandeburg authored
The e100 driver triggers BUG_ON(buf->direction != dir) by doing pci_map_single(..., PCI_DMA_BIDIRECTIONAL) and pci_dma_sync_single_for_device(..., PCI_DMA_TODEVICE). Changing the DMA direction, especially with dmabounce will result in unexpected behaviour. Reported-by: Anders Grafstrom <grfstrm@users.sourceforge.net> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bjorn Helgaas authored
Use dev_printk() instead of printk() to give a little more context and use consistent format. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ron Mercer authored
Removed debug print statements and improved conditionals around informational statements. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
\"Rafael J. Wysocki\ authored
Since dev->power.should_wakeup bit is used by the PCI core to decide whether the device should wake up the system from sleep states, set/unset this bit whenever WOL is enabled/disabled using igb_set_wol(). Accordingly, use device_can_wakeup() for checking if wake-up is supported by the device. Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
\"Rafael J. Wysocki\ authored
Since dev->power.should_wakeup bit is used by the PCI core to decide whether the device should wake up the system from sleep states, set/unset this bit whenever WOL is enabled/disabled using e1000_set_wol(). Accordingly, use device_can_wakeup() for checking if wake-up is supported by the device. Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
\"Rafael J. Wysocki\ authored
Since dev->power.should_wakeup bit is used by the PCI core to decide whether the device should wake up the system from sleep states, set/unset this bit whenever WOL is enabled/disabled using e1000_set_wol(). Accordingly, use device_can_wakeup() for checking if wake-up is supported by the device. Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joey Zhuo authored
Signed-off-by: Joey Zhuo <joeyzhuo@via.com.tw> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: don't grab devices with no input HID: fix radio-mr800 hidquirks HID: fix kworld fm700 radio hidquirks HID: fix start/stop cycle in usbhid driver HID: use single threaded work queue for hid_compat HID: map macbook keys for "Expose" and "Dashboard" HID: support for new unibody macbooks HID: fix locking in hidraw_open()
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: ensure correct logging in do_io_probe pcmcia: add another pata/ide ID pcmcia: add braces in error path pcmcia: struct device - replace bus_id with dev_name(), dev_set_name() pcmcia: setup resource information for pseudo multifunction devices. pcmcia: fix indentation & braces disagreement - add braces
-
- 15 Nov, 2008 7 commits
-
-
Ron Madrid authored
This patch will add support for the Marvell 88E1118 PHY which supports gigabit ethernet among other things. Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yevgeny Petrilin authored
Before the change the driver reported the same pause parameters for all the ports, even only one of them was modified. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
-
Al Viro authored
Inotify watch removals suck violently. To kick the watch out we need (in this order) inode->inotify_mutex and ih->mutex. That's fine if we have a hold on inode; however, for all other cases we need to make damn sure we don't race with umount. We can *NOT* just grab a reference to a watch - inotify_unmount_inodes() will happily sail past it and we'll end with reference to inode potentially outliving its superblock. Ideally we just want to grab an active reference to superblock if we can; that will make sure we won't go into inotify_umount_inodes() until we are done. Cleanup is just deactivate_super(). However, that leaves a messy case - what if we *are* racing with umount() and active references to superblock can't be acquired anymore? We can bump ->s_count, grab ->s_umount, which will almost certainly wait until the superblock is shut down and the watch in question is pining for fjords. That's fine, but there is a problem - we might have hit the window between ->s_active getting to 0 / ->s_count - below S_BIAS (i.e. the moment when superblock is past the point of no return and is heading for shutdown) and the moment when deactivate_super() acquires ->s_umount. We could just do drop_super() yield() and retry, but that's rather antisocial and this stuff is luser-triggerable. OTOH, having grabbed ->s_umount and having found that we'd got there first (i.e. that ->s_root is non-NULL) we know that we won't race with inotify_umount_inodes(). So we could grab a reference to watch and do the rest as above, just with drop_super() instead of deactivate_super(), right? Wrong. We had to drop ih->mutex before we could grab ->s_umount. So the watch could've been gone already. That still can be dealt with - we need to save watch->wd, do idr_find() and compare its result with our pointer. If they match, we either have the damn thing still alive or we'd lost not one but two races at once, the watch had been killed and a new one got created with the same ->wd at the same address. That couldn't have happened in inotify_destroy(), but inotify_rm_wd() could run into that. Still, "new one got created" is not a problem - we have every right to kill it or leave it alone, whatever's more convenient. So we can use idr_find(...) == watch && watch->inode->i_sb == sb as "grab it and kill it" check. If it's been our original watch, we are fine, if it's a newcomer - nevermind, just pretend that we'd won the race and kill the fscker anyway; we are safe since we know that its superblock won't be going away. And yes, this is far beyond mere "not very pretty"; so's the entire concept of inotify to start with. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Huang Weiyi authored
The file(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/hwmon/lis3lv02d.c This patch removes the said #include <version.h>. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds authored
* 'sh/for-2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: serial: sh-sci: Reorder the SCxTDR write after the TDxE clear. sh: __copy_user function can corrupt the stack in case of exception sh: Fixed the TMU0 reload value on resume sh: Don't factor in PAGE_OFFSET for valid_phys_addr_range() check. sh: early printk port type fix i2c: fix i2c-sh_mobile rx underrun sh: Provide a sane valid_phys_addr_range() to prevent TLB reset with PMB. usb: r8a66597-hcd: fix wrong data access in SuperH on-chip USB fix sci type for SH7723 serial: sh-sci: fix cannot work SH7723 SCIFA sh: Handle fixmap TLB eviction more coherently.
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docsLinus Torvalds authored
* 'doc-subdirs' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs: Create/use more directory structure in the Documentation/ tree.
-