Add device tree support for  Cypress trackpad devices.
Signed-off-by: Dudley Du <dudl@cypress.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We need to power up the chip before we can initialize it.

On systems that delegate task of powering up regulators to firmware we
assume that we'll be simply given a dummy regulator.
Signed-off-by: Dudley Du <dudl@cypress.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The I2C core always reports the MODALIAS uevent as "i2c:<client name"
regardless if the driver was matched using the I2C id_table or the
of_match_table. So technically there's no need for a driver to export
the OF table since currently it's not used.

In fact, the I2C device ID table is mandatory for I2C drivers since
a i2c_device_id is passed to the driver's probe function even if the
I2C core used the OF table to match the driver.

And since the I2C core uses different tables, OF-only drivers needs to
have duplicated data that has to be kept in sync and also the dev node
compatible manufacturer prefix is stripped when reporting the MODALIAS.

To avoid the above, the I2C core behavior may be changed in the future
to not require an I2C device table for OF-only drivers and report the
OF module alias. So, it's better to also export the OF table to prevent
breaking module autoloading if that happens.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The I2C core always reports the MODALIAS uevent as "i2c:<client name"
regardless if the driver was matched using the I2C id_table or the
of_match_table. So the driver needs to export the I2C table and this
be built into the module or udev won't have the necessary information
to auto load the correct module when the device is added.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The GPIOD API can be used from boardcode, so that the DT check can be
removed. To avoid breaking existing boardcode, _optional() variant has been
chosen. For completely removing the DT check, the regulator has also been
made optional, so that it could be supplied from boardcode.

As a side-effect the patch fixes the after-probe reset GPIO state, so that
the device is not kept in reset state.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Using dev_*_drvdata() instead of spi_*_drvdata() reduces lines of code and
prepares the driver for possible tsc2004 support, which is i2c based.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Convert driver so that it uses regmap instead of directly using
spi_transfer for all register accesses.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Replace spaces with tab, so that the tsc2005 Kconfig entry matches the
other entries in drivers/input/touchscreen/Kconfig.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Improve defines for first control byte by removing 0x00 prefix (the defines
are for 8 bit values and not for 16 bit values) and expose register
structure by exposing the shift.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Using managed input device (via devm_input_allocate_device) simplifies
error handling and driver removal paths and also silences CID# 712569.
Reviewed-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add CYTP0002 to the list of ACPI HIDs recognized by the driver.
Signed-off-by: Dudley Du <dudl@cypress.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Fix the the runtime suspend power management not working issue when system
starts up and before user touches the trackpad device.
TEST=test on Chromebook.
Signed-off-by: Dudley Du <dudl@cypress.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Gen5 and Gen6 trackpad devices are able to detect and report object
proximity data/events, add this function support in the cyapa driver
through the ABS_DISTANCE event.
Signed-off-by: Dudley Du <dudl@cypress.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Based on the cyapa core, add support for basic functionality of the gen6
trackpad devices. The driver can automatically determine what protocol
(gen3, gen5, or gen6) should be used with the attached trackpad device.
Signed-off-by: Dudley Du <dudl@cypress.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Change 'gen5' to 'pip' for all macros, variables and functions that are
shared between gen5 and gen6 modules to make naming more clear and
readable.

Also fix a few spelling errors.
Signed-off-by: Dudley Du <dudl@cypress.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Let's switch the driver to use managed resources, this will simplify
error handling and driver unbinding logic.
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Wakeup property of device is not Linux-specific, it describes intended
system behavior regardless of the OS being used. Therefore let's drop
"linux," prefix, and, while at it, use the same name as I2C bus does:
"wakeup-source".

We keep parsing old name to keep compatibility with old DTSes.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Wakeup property of device is not Linux-specific, it describes intended
system behavior regardless of the OS being used. Therefore let's drop
"linux," prefix, and, while at it, use the same name as I2C bus does:
"wakeup-source".

We keep parsing old name to keep compatibility with old DTSes.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Wakeup property of device is not Linux-specific, it describes intended
system behavior regardless of the OS being used. Therefore let's drop
"linux," prefix, and, while at it, use the same name as I2C bus does:
"wakeup-source".

We keep parsing old name to keep compatibility with old DTSes.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Wakeup property of device is not Linux-specific, it describes intended
system behavior regardless of the OS being used. Therefore let's drop
"linux," prefix, and, while at it, use the same name as I2C bus does:
"wakeup-source".

We keep parsing old name to keep compatibility with old DTSes.
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Wakeup property of device is not Linux-specific, it describes intended
system behavior regardless of the OS being used. Therefore let's drop
"linux," prefix, and, while at it, use the same name as I2C bus does:
"wakeup-source".

We keep parsing old name to keep compatibility with old DTSes.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Wakeup property of device is not Linux-specific, it describes intended
system behavior regardless of the OS being used. Therefore let's drop
"linux," prefix, and, while at it, use the same name as I2C bus does:
"wakeup-source".

We keep parsing old name to keep compatibility with old DTSes.

Cc: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

On pm8xxx PMICs, shutdown and restart are signaled to the PMIC via a pin
called PS_HOLD. When this pin goes low, the PMIC performs a configurable
power sequence. Add a .shutdown hook so that we can properly configure this
power sequence for shutdown or restart depending on the system state.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Sync up with Linux 4.2-rc3 to bring in infrastructure (OF) pieces.

ELAN0600 seems to work just fine in mouse emulation mode through i2c-hid,
but to have full raw touch support we need to register it in elan_i2c.ko
Reported-and-tested-by: Alessio Treglia <alessio@debian.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Commit 2d538095 ("Input: zforce_ts - convert to use the gpiod
interface") converted this driver to use the gpiod functions. These
functions take the active low property into account, so we don't have
to invert the result of gpiod_get_value_cansleep(). This has been
missed in that commit. Fix it.
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull SCSI fixes from James Bottomley:
 "Two fairly simple fixes: one is a change that causes us to have a very
  low queue depth leading to performance issues and the other is a null
  deref occasionally in tapes thanks to use after put"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: fix host max depth checking for the 'queue_depth' sysfs interface
  st: null pointer dereference panic caused by use after kref_put by st_open

Pull MIPS fixes from Ralf Baechle:
 "Another round of MIPS fixes for 4.2.

  Things are looking quite decent at this stage but the recent work on
  the FPU support took its toll:

   - fix an incorrect overly restrictive ifdef

   - select O32 64-bit FP support for O32 binary compatibility

   - remove workarounds for Sibyte SB1250 Pass1 parts.  There are rare
     fixing the workarounds is not worth the effort.

   - patch up an outdated and now incorrect comment"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: fpu.h: Allow 64-bit FPU on a 64-bit MIPS R6 CPU
  MIPS: SB1: Remove support for Pass 1 parts.
  MIPS: Require O32 FP64 support for MIPS64 with O32 compat
  MIPS: asm-offset.c: Patch up various comments refering to the old filename.

Pull parisc fix from Helge Deller:
 "A memory leak fix from Christophe Jaillet which was introduced with
  kernel 4.0 and which leads to kernel crashes on parisc after 1-3 days"

* 'parisc-4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: mm: Fix a memory leak related to pmd not attached to the pgd

Pull ARM SoC fixes from Olof Johansson:
 "By far most of the fixes here are updates to DTS files to deal with
  some mostly minor bugs.

  There's also a fix to deal with non-PM kernel configs on i.MX, a
  regression fix for ethernet on PXA platforms and a dependency fix for
  OMAP"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: keystone: dts: rename pcie nodes to help override status
  ARM: keystone: dts: fix dt bindings for PCIe
  ARM: pxa: fix dm9000 platform data regression
  ARM: dts: Correct audio input route & set mic bias for am335x-pepper
  ARM: OMAP2+: Add HAVE_ARM_SCU for AM43XX
  MAINTAINERS: digicolor: add dts files
  ARM: ux500: fix MMC/SD card regression
  ARM: ux500: define serial port aliases
  ARM: dts: OMAP5: Add #iommu-cells property to IOMMUs
  ARM: dts: OMAP4: Add #iommu-cells property to IOMMUs
  ARM: dts: Fix frequency scaling on Gumstix Pepper
  ARM: dts: configure regulators for Gumstix Pepper
  ARM: dts: omap3: overo: Update LCD panel names
  ARM: dts: cros-ec-keyboard: Add support for some Japanese keys
  ARM: imx6: gpc: always enable PU domain if CONFIG_PM is not set
  ARM: dts: imx53-qsb: fix TVE entry
  ARM: dts: mx23: fix iio-hwmon support
  ARM: dts: imx27: Adjust the GPT compatible string
  ARM: socfpga: dts: Fix entries order
  ARM: socfpga: dts: Fix adxl34x formating and compatible string

Commit 6134d949 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6")
added support for 64-bit FPU on a 32-bit MIPS R6 processor but it missed
the 64-bit CPU case leading to FPU failures when requesting FR=1 mode
(which is always the case for MIPS R6 userland) when running a 32-bit
kernel on a 64-bit CPU. We also fix the MIPS R2 case.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Fixes: 6134d949 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6")
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: <stable@vger.kernel.org> # 4.0+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10734/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Commit 0e0da48d ("parisc: mm: don't count preallocated pmds")
introduced a memory leak.

After this commit, the 'return' statement in pmd_free is executed in all
cases. Even for pmd that are not attached to the pgd.  So 'free_pages'
can never be called anymore, leading to a memory leak.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org  # v4.0+
Signed-off-by: Helge Deller <deller@gmx.de>

Merge "pxa fixes for v4.2" from Robert Jarzmik:

ARM: pxa: fixes for v4.2-rc2

This single fix reenables ethernet cards for several pxa boards,
broken by regulator addition to dm9000 driver.

* tag 'pxa-fixes-v4.2-rc2' of https://github.com/rjarzmik/linux:
  ARM: pxa: fix dm9000 platform data regression

Pull ARM fixes from Russell King:
 "A small set of ARM fixes for -rc3, most of them not far off
  one-liners, with the exception of fixing the V7 cache invalidation for
  incoming SMP processors which was causing problems for SoCFPGA
  devices"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: fix __virt_to_idmap build error on !MMU
  ARM: invalidate L1 before enabling coherency
  ARM: 8404/1: dma-mapping: fix off-by-one error in bitmap size check
  ARM: 8402/1: perf: Don't use of_node after putting it
  ARM: 8400/1: use virt_to_idmap to get phys_reset address

Pull x86 fixes from Ingo Molnar:
 "Two families of fixes:

   - Fix an FPU context related boot crash on newer x86 hardware with
     larger context sizes than what most people test.  To fix this
     without ugly kludges or extensive reverts we had to touch core task
     allocator, to allow x86 to determine the task size dynamically, at
     boot time.

     I've tested it on a number of x86 platforms, and I cross-built it
     to a handful of architectures:

                                        (warns)               (warns)
       testing     x86-64:  -git:  pass (    0),  -tip:  pass (    0)
       testing     x86-32:  -git:  pass (    0),  -tip:  pass (    0)
       testing        arm:  -git:  pass ( 1359),  -tip:  pass ( 1359)
       testing       cris:  -git:  pass ( 1031),  -tip:  pass ( 1031)
       testing       m32r:  -git:  pass ( 1135),  -tip:  pass ( 1135)
       testing       m68k:  -git:  pass ( 1471),  -tip:  pass ( 1471)
       testing       mips:  -git:  pass ( 1162),  -tip:  pass ( 1162)
       testing    mn10300:  -git:  pass ( 1058),  -tip:  pass ( 1058)
       testing     parisc:  -git:  pass ( 1846),  -tip:  pass ( 1846)
       testing      sparc:  -git:  pass ( 1185),  -tip:  pass ( 1185)

     ... so I hope the cross-arch impact 'none', as intended.

     (by Dave Hansen)

   - Fix various NMI handling related bugs unearthed by the big asm code
     rewrite and generally make the NMI code more robust and more
     maintainable while at it.  These changes are a bit late in the
     cycle, I hope they are still acceptable.

     (by Andy Lutomirski)"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86
  x86/fpu, sched: Dynamically allocate 'struct fpu'
  x86/entry/64, x86/nmi/64: Add CONFIG_DEBUG_ENTRY NMI testing code
  x86/nmi/64: Make the "NMI executing" variable more consistent
  x86/nmi/64: Minor asm simplification
  x86/nmi/64: Use DF to avoid userspace RSP confusing nested NMI detection
  x86/nmi/64: Reorder nested NMI checks
  x86/nmi/64: Improve nested NMI comments
  x86/nmi/64: Switch stacks on userspace NMI entry
  x86/nmi/64: Remove asm code that saves CR2
  x86/nmi: Enable nested do_nmi() handling for 64-bit kernels

Pull timer fix from Ingo Molnar:
 "Fix for a misplaced export that can cause build failures in certain
  (rare) Kconfig situations"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick: Move the export of tick_broadcast_oneshot_control to the proper place

Pull scheduler fix from Ingo Molnar:
 "A oneliner rq throttling fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Test list head instead of list entry in throttle_cfs_rq()

Pull perf fixes from Ingo Molnar:
 "Mostly tooling fixes, plus a static key fix fixing /sys/devices/cpu/rdpmc"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Really allow to specify custom CC, AR or LD
  perf auxtrace: Fix misplaced check for HAVE_SYNC_COMPARE_AND_SWAP_SUPPORT
  perf hists browser: Take the --comm, --dsos, etc filters into account
  perf symbols: Store if there is a filter in place
  x86, perf: Fix static_key bug in load_mm_cr4()
  tools: Copy lib/hweight.c from the kernel sources
  perf tools: Fix the detached tarball wrt rbtree copy
  perf thread_map: Fix the sizeof() calculation for map entries
  tools lib: Improve clean target
  perf stat: Fix shadow declaration of close
  perf tools: Fix lockup using 32-bit compat vdso

Pull irq fixes from Ingo Molnar:
 "Misc irq fixes:

   - two driver fixes
   - a Xen regression fix
   - a nested irq thread crash fix"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gicv3-its: Fix mapping of LPIs to collections
  genirq: Prevent resend to interrupts marked IRQ_NESTED_THREAD
  genirq: Revert sparse irq locking around __cpu_up() and move it to x86 for now
  gpio/davinci: Fix race in installing chained irq handler