Now that make W=1 starts complaining the lack of MODULE_DESCRIPTION(),
let's add the missing information.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Closes: https://lore.kernel.org/r/ZjpQm-hxLQtpgkUx@smile.fi.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20240508091128.25274-3-tiwai@suse.de

Now that make W=1 starts complaining the lack of MODULE_DESCRIPTION(),
let's add the missing information.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Closes: https://lore.kernel.org/r/ZjpQm-hxLQtpgkUx@smile.fi.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20240508091128.25274-2-tiwai@suse.de

This dock previously presented as 'generic USB Audio'.
UCM may now be applied specific to this dock.
Signed-off-by: Steven 'Steve' Kendall <skend@chromium.org>
Link: https://lore.kernel.org/r/20240508-usb-audio-hp-engage-go-dock-v1-1-9e2984d49e63@chromium.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

The cs_dsp instance is initialized in the driver probe() so it
should be freed in the driver remove(). Also fix a missing call
to cs_dsp_remove() in the error path of cs35l56_hda_common_probe().

The call to cs_dsp_remove() was being done in the component unbind
callback cs35l56_hda_unbind(). This meant that if the driver was
unbound and then re-bound it would be using an uninitialized cs_dsp
instance.

It is best to initialize the cs_dsp instance in probe() so that it
can return an error if it fails. The component binding API doesn't
have any error handling so there's no way to handle a failure if
cs_dsp was initialized in the bind.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 73cfbfa9 ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Link: https://lore.kernel.org/r/20240508100811.49514-1-rf@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Move the initialization of the shared struct hda_component array into
hda_component_manager_bind().

The purpose of the manager bind() callback is to allow it to perform
initialization before binding in the component drivers. This is the
correct place to initialize the shared data.

The original implementation initialized the shared data in
hda_component_manager_init(). This is only done once during probe()
of the manager driver. So if the component binding was unbound and
then rebound, the shared data would not be re-initialized.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: fd895a74 ("ALSA: hda: realtek: Move hda_component implementation to module")
Link: https://lore.kernel.org/r/20240508100347.47283-1-rf@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Use the control private_free callback to free the associated data
block. This ensures that the memory won't leak, whatever way the
control gets destroyed.

The original implementation didn't actually remove the ALSA
controls in hda_cs_dsp_control_remove(). It only freed the internal
tracking structure. This meant it was possible to remove/unload the
amp driver while leaving its ALSA controls still present in the
soundcard. Obviously attempting to access them could cause segfaults
or at least dereferencing stale pointers.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 3233b978 ("ALSA: hda: hda_cs_dsp_ctl: Add Library to support CS_DSP ALSA controls")
Link: https://lore.kernel.org/r/20240508095627.44476-1-rf@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).

Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240507135513.14919-10-tiwai@suse.de

*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).

Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240507135513.14919-9-tiwai@suse.de

*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).

Let's correct the old usages of *-objs in Makefiles.

Cc: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240507135513.14919-8-tiwai@suse.de

*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).

Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240507135513.14919-7-tiwai@suse.de

*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).

Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240507135513.14919-6-tiwai@suse.de

*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).

Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240507135513.14919-5-tiwai@suse.de

*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).

Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240507135513.14919-4-tiwai@suse.de

*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).

Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240507135513.14919-3-tiwai@suse.de

*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).

Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240507135513.14919-2-tiwai@suse.de

This laptop uses CS35L41 HDA with 2 amps using I2C and Internal Boost.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240507160131.356114-1-sbinding@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

This fixes the sound not working from internal speakers on Lenovo
Legion Y9000X 2022 IAH7 models.

Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218744Signed-off-by: Junhao Pei <ArcticLampyrid@outlook.com>
Link: https://lore.kernel.org/r/TYCP286MB2535ACD5188A91C000B7CD13C41C2@TYCP286MB2535.JPNP286.PROD.OUTLOOK.COMSigned-off-by: Takashi Iwai <tiwai@suse.de>

Pull HD-audio CONFIG_PM cleanup.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

dump_config_tree() is declared to return an int, but the compiler cannot
prove that it always returns any value at all. This leads to a clang
warning, when building via:

    make LLVM=1 -C tools/testing/selftests
Suggested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506075419.301780-1-perex@perex.cz

The correct suffix is 'y' for the kernel code and
'objs' for the user space. Update documentation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240506085219.3403731-1-andriy.shevchenko@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add HD Audio PCI ID and HDMI codec vendor ID for Intel Battlemage.
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/20240506052531.1150062-1-chaitanya.kumar.borah@intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:

	timeout = wait_for_completion_timeout(...)
	if (!timeout) return -ETIMEDOUT;

with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.

Fix to the proper variable type 'unsigned long' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240430121028.30443-1-wsa+renesas@sang-engineering.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

This adds support for all sample rates supported by the
hardware,Digidesign Mbox 3 supports: {44100, 48000, 88200, 96000}

Fixes syncing clock issues that presented as pops. To test this, without
this patch playing 440hz tone produces pops.

Clock is now synced between playback and capture interfaces so no more
latency drift issue when using pipewire pro-profile.
(https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/3900)
Signed-off-by: Manuel Barrio Linares <mbarriolinares@gmail.com>
Link: https://lore.kernel.org/r/20240430171020.192285-1-mbarriolinares@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

All of these laptops do not have _DSD, so need to be added to the
configuration table.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240429154853.9393-3-sbinding@opensource.cirrus.com

IRQs used for CS35L41 HDA are used to detect and attempt to recover
from errors. Without these interrupts, the driver should behave as
normal.

For laptops which contain a bad configuration for the interrupt in the
BIOS, the current behaviour of failing when trying to configure the
interrupt means the probe fails, and audio is broken.

It is better for the user experience if the driver instead warns that
no interrupt is configured rather than simply failing.
The drawback is that if an error occurs without the interrupt, we
firstly would not be able to trace the issue, and secondly would not
be able to attempt to recover from the issue, but this is better than
failing immediately.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240429154853.9393-2-sbinding@opensource.cirrus.com

CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio via codec driver, too.

Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-13-tiwai@suse.de

CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio sigmatel codec driver, too.

Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-12-tiwai@suse.de

CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio realtek codec driver, too.

Simply drop CONFIG_PM ifdefs.  A superfluous __maybe_unused attribute
was dropped as well.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-11-tiwai@suse.de

CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio HDMI codec driver, too.

Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-10-tiwai@suse.de

CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio generic cs8409 driver, too.

Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-9-tiwai@suse.de

CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio conexant codec driver, too.

Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-8-tiwai@suse.de

CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio cirrus codec driver, too.

Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-7-tiwai@suse.de

CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio ca0132 codec driver, too.

Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-6-tiwai@suse.de

CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio analog codec driver, too.

Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-5-tiwai@suse.de

CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio generic codec driver, too.

Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-4-tiwai@suse.de

CONFIG_PM is almost mandatory nowadays for real systems, but we have
lots of CONFIG_PM dependent code in snd-hda-codec helper code.

Let's reduce the dependencies of CONFIG_PM now.  The only visible
drawback would be a couple of superfluous trace entries for runtime
PM, but we can live with that.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-3-tiwai@suse.de

snd-hda-intel contains lots of CONFIG_PM dependent code although
CONFIG_PM is almost mandatory nowadays, and it makes the code
unnecessarily complex.

Let's reduce the dependencies of CONFIG_PM in snd-hda-intel driver
code.  I left a few module options to be dependent on CONFIG_PM (which
are visible to users), but other places are either enabled or
optimized by compiler automatically.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-2-tiwai@suse.de

The alc_spec.power_hook is defined only with CONFIG_PM, and the recent
fix overlooked it, resulting in a build error without CONFIG_PM.
Fix it with the simple ifdef and set __maybe_unused for the function.

We may drop the whole CONFIG_PM dependency there, but it should be
done in a separate cleanup patch later.

Fixes: 1e707769 ("ALSA: hda/realtek - Set GPIO3 to default at S4 state for Thinkpad with ALC1318")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405012104.Dr7h318W-lkp@intel.com/
Message-ID: <20240502062442.30545-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v6.9-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.9

This is much larger than is ideal, partly due to your holiday but also
due to several vendors having come in with relatively large fixes at
similar times.  It's all driver specific stuff.

The meson fixes from Jerome fix some rare timing issues with blocking
operations happening in triggers, plus the continuous clock support
which fixes clocking for some platforms.  The SOF series from Peter
builds to the fix to avoid spurious resets of ChainDMA which triggered
errors in cleanup paths with both PulseAudio and PipeWire, and there's
also some simple new debugfs files from Pierre which make support a lot
eaiser.

Unfortunately both Lenovo Legion Pro 7 16ARX8H and Legion 7i 16IAX7
got the very same PCI SSID while the hardware implementations are
completely different (the former is with TI TAS2781 codec while the
latter is with Cirrus CS35L41 codec).  The former model got broken by
the recent fix for the latter model.

For addressing the regression, check the codec SSID and apply the
proper quirk for each model now.

Fixes: 24b6332c ("ALSA: hda: Add Lenovo Legion 7i gen7 sound quirk")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1223462
Message-ID: <20240430163206.5200-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>