- 23 Oct, 2023 5 commits
-
-
Hari Bathini authored
powerpc64_jit_data is a misnomer as it is meant for both ppc32 and ppc64. Rename it to powerpc_jit_data. Signed-off-by:
Hari Bathini <hbathini@linux.ibm.com> Acked-by:
Song Liu <song@kernel.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231020141358.643575-5-hbathini@linux.ibm.com
-
Hari Bathini authored
Implement bpf_arch_text_invalidate and use it to fill unused part of the bpf_prog_pack with trap instructions when a BPF program is freed. Signed-off-by:
-
Hari Bathini authored
bpf_arch_text_copy is used to dump JITed binary to RX page, allowing multiple BPF programs to share the same page. Use the newly introduced patch_instructions() to implement it. Signed-off-by:
-
Hari Bathini authored
patch_instruction() entails setting up pte, patching the instruction, clearing the pte and flushing the tlb. If multiple instructions need to be patched, every instruction would have to go through the above drill unnecessarily. Instead, introduce patch_instructions() function that sets up the pte, clears the pte and flushes the tlb only once per page range of instructions to be patched. Duplicate most of the patch_instruction() code instead of merging with it, to avoid the performance degradation observed on ppc32, for patch_instruction(), with the code path merged. Also, setup poking_init() always as BPF expects poking_init() to be setup even when STRICT_KERNEL_RWX is off. Signed-off-by:
-
Michael Ellerman authored
There's a single call to local_flush_tlb_page_psize() in the code patching code. That call is never executed on 32-bit Book3S, because it's guarded by mm_patch_enabled() which is essentially a radix_enabled() check, which is always false on 32s. However depending on how the optimiser sees things it may still trip over the BUILD_BUG() in the 32s stub of local_flush_tlb_page_psize(). To avoid that, implement it in terms of flush_range() so that if it ever becomes called it should function, even if not optimally. Note that flush_range() deals with page aligning the address and so on, and that 32s doesn't support huge pages so there should be no issue with non-standard page sizes needing to be flushed. Signed-off-by:
-
- 20 Oct, 2023 16 commits
-
-
Minjie Du authored
password might contain private information, so better use kfree_sensitive to free it. In plpks_gen_password() use kfree_sensitive(). Signed-off-by:
Minjie Du <duminjie@vivo.com> Signed-off-by:
-
Christophe Leroy authored
Commit c28c15b6 ("powerpc/code-patching: Use temporary mm for Radix MMU") added a hwsync for when __patch_instruction() fails, we results in a quite odd unbalanced logic. Instead of calling mb() when __patch_instruction() returns an error, call mb() in the __patch_instruction()'s error path directly. Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
Rob Herring authored
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Christophe Leroy authored
Since commit d3c511ac ("powerpc/cpm: Remove !CONFIG_PPC_CPM_NEW_BINDING code") cpm_dp...() macros have no added value anymore. Last user of those macros were fixed by commit 5e6cb39a ("net: fs_enet: Use cpm_muram_xxx() functions instead of cpm_dpxxx() macros") Remove them. Signed-off-by:
-
Nicholas Piggin authored
Rename yield_propagate_owner to yield_sleepy_owner, which better describes what it does (what, not how). Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Tested-by:
Shrikanth Hegde <sshegde@linux.vnet.ibm.com> Reviewed-by:
"Nysal Jan K.A" <nysal@linux.ibm.com> Signed-off-by:
-
Nicholas Piggin authored
The sleepy (aka lock-owner-is-preempted) condition is propagated down the queue by each waiter. If a waiter becomes preempted, it can no longer propagate sleepy. To allow subsequent waiters to yield to the lock owner, also check the lock owner in this case. Signed-off-by:
-
Nicholas Piggin authored
To simplify things, don't propagate the not-sleepy condition back down the queue. Instead, have the waiters clear their own node->sleepy when finding the lock owner is not preempted. Signed-off-by:
-
Nicholas Piggin authored
Rather than propagating the CPU number of the preempted lock owner, just propagate whether the owner was preempted. Waiters must read the lock value when yielding to it to prevent races anyway, so might as well always load the owner CPU from the lock. To further simplify the code, also don't propagate the -1 (or sleepy=false in the new scheme) down the queue. Instead, have the waiters clear it themselves when finding the lock owner is not preempted. Signed-off-by:
-
Nicholas Piggin authored
If a queued waiter notices the lock owner or the previous waiter has been preempted, it attempts to mark the lock sleepy, but it does this as a try-set operation using the original lock value it got when queueing, which will become stale as the queue progresses, and the try-set will fail. Drop this and just set the sleepy seen clock. Signed-off-by:
-
Nicholas Piggin authored
When the PMU is disabled, MMCRA is not updated to disable BHRB and instruction sampling. This can lead to those features remaining enabled, which can slow down a real or emulated CPU. Fixes: 1cade527 ("powerpc/perf: BHRB control to disable BHRB logic when not used") Cc: stable@vger.kernel.org # v5.9+ Signed-off-by:
-
Naveen N Rao authored
When creating a kprobe on function entry through tracefs, enable arguments to be recorded to be specified using $argN syntax. Signed-off-by:
Naveen N Rao <naveen@kernel.org> Signed-off-by:
-
Naveen N Rao authored
Toolchains don't always default to the ELFv2 ABI. This is true with at least the kernel.org toolchains. As such, pass -mabi=elfv2 explicitly to ensure that we are testing against the correct compiler output. Signed-off-by:
-
Nick Child authored
Rather than replacing the versionless vmlinux and System.map files, copy to files with the version info appended. Additionally, since executing the script is a last resort option, inform the user about the missing `installkernel` command and the location of the installation. This work is adapted from `arch/s390/boot/install.sh`, and also matches the behaviour of arm, arm64 and riscv. Signed-off-by:
Nick Child <nnac123@linux.ibm.com> Signed-off-by:
-
Wang Yufen authored
If the vcpu_associativity alloc memory successfully but the pcpu_associativity fails to alloc memory, the vcpu_associativity memory leaks. Fixes: d62c8dee ("powerpc/pseries: Provide vcpu dispatch statistics") Signed-off-by:
Wang Yufen <wangyufen@huawei.com> Reviewed-by:
"Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
The macro __SPIN_LOCK_INITIALIZER() is implementation specific. Users that desire to initialize a spinlock in a struct must use __SPIN_LOCK_UNLOCKED(). Use __SPIN_LOCK_UNLOCKED() for the spinlock_t in imc_global_refc. Fixes: 76d588dd ("powerpc/imc-pmu: Fix use of mutex in IRQs disabled section") Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Haren Myneni authored
The VAS open window call prints error message and returns -EBUSY after the migration suspend event initiated and until the resume event completed on the destination system. It can cause the log buffer filled with these error messages if the user space issues continuous open window calls. Similar case even for DLPAR CPU remove event when no credits are available until the credits are freed or with the other DLPAR CPU add event. So changes in the patch to use pr_err_ratelimited() instead of pr_err() to display open window failure and not-available credits error messages. Use pr_fmt() and make the corresponding changes to have the consistencein prefix all pr_*() messages (vas-api.c). Fixes: 37e67648 ("powerpc/pseries/vas: Add VAS migration handler") Signed-off-by:
Haren Myneni <haren@linux.ibm.com> [mpe: Use "vas-api" as the prefix to match the file name.] Signed-off-by:
-
- 19 Oct, 2023 19 commits
-
-
Gaurav Batra authored
When a device is initialized, the driver invokes dma_supported() twice - first for streaming mappings followed by coherent mappings. For an SR-IOV device, default window is deleted and DDW created. With vPMEM enabled, TCE mappings are dynamically created for both vPMEM and SR-IOV device. There are no direct mappings. First time when dma_supported() is called with 64 bit mask, DDW is created and marked as dynamic window. The second time dma_supported() is called, enable_ddw() finds existing window for the device and incorrectly returns it as "direct mapping". This only happens when size of DDW is big enough to map max LPAR memory. This results in streaming TCEs to not get dynamically mapped, since code incorrently assumes these are already pre-mapped. The adapter initially comes up but goes down due to EEH. Fixes: 381ceda8 ("powerpc/pseries/iommu: Make use of DDW for indirect mapping") Cc: stable@vger.kernel.org # v5.15+ Signed-off-by:
Gaurav Batra <gbatra@linux.vnet.ibm.com> Signed-off-by:
-
Srikar Dronamraju authored
PowerVM Hypervisor dispatches on a whole core basis. In a shared LPAR, a CPU from a core that is CEDED or preempted may have a larger latency. In such a scenario, its preferable to choose a different CPU to run. If one of the CPUs in the core is active, i.e neither CEDED nor preempted, then consider this CPU as not preempted. Also if any of the CPUs in the core has yielded but OS has not requested CEDE or CONFER, then consider this CPU to be preempted. Correct detection of preempted CPUs is important for detecting idle CPUs/cores in task scheduler. Tested-by:
Aboorva Devarajan <aboorvad@linux.vnet.ibm.com> Reviewed-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by:
-
Kuan-Wei Chiu authored
This patch improves the performance of event alternative lookup by replacing the previous linear search with a more efficient binary search. This change reduces the time complexity for the search process from O(n) to O(log(n)). A pre-sorted table of event values and their corresponding indices has been introduced to expedite the search process. Signed-off-by:
Kuan-Wei Chiu <visitorckw@gmail.com> [mpe: Call the array "presort*ed*_event_table", minor formatting] Signed-off-by:
-
Michael Ellerman authored
A thread started via eg. user_mode_thread() runs in the kernel to begin with and then may later return to userspace. While it's running in the kernel it has a pt_regs at the base of its kernel stack, but that pt_regs is all zeroes. If the thread oopses in that state, it leads to an ugly stack trace with a big block of zero GPRs, as reported by Joel: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc7-00004-gf7757129-dirty #3 Hardware name: IBM PowerNV (emulated by qemu) POWER9 0x4e1200 opal:v7.0 PowerNV Call Trace: [c0000000036afb00] [c0000000010dd058] dump_stack_lvl+0x6c/0x9c (unreliable) [c0000000036afb30] [c00000000013c524] panic+0x178/0x424 [c0000000036afbd0] [c000000002005100] mount_root_generic+0x250/0x324 [c0000000036afca0] [c0000000020057d0] prepare_namespace+0x2d4/0x344 [c0000000036afd20] [c0000000020049c0] kernel_init_freeable+0x358/0x3ac [c0000000036afdf0] [c0000000000111b0] kernel_init+0x30/0x1a0 [c0000000036afe50] [c00000000000debc] ret_from_kernel_user_thread+0x14/0x1c --- interrupt: 0 at 0x0 NIP: 0000000000000000 LR: 0000000000000000 CTR: 0000000000000000 REGS: c0000000036afe80 TRAP: 0000 Not tainted (6.5.0-rc7-00004-gf7757129-dirty) MSR: 0000000000000000 <> CR: 00000000 XER: 00000000 CFAR: 0000000000000000 IRQMASK: 0 GPR00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR04: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR28: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 NIP [0000000000000000] 0x0 LR [0000000000000000] 0x0 --- interrupt: 0 The all-zero pt_regs looks ugly and conveys no useful information, other than its presence. So detect that case and just show the presence of the frame by printing the interrupt marker, eg: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc3-00126-g18e9506562a0-dirty #301 Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries Call Trace: [c000000003aabb00] [c000000001143db8] dump_stack_lvl+0x6c/0x9c (unreliable) [c000000003aabb30] [c00000000014c624] panic+0x178/0x424 [c000000003aabbd0] [c0000000020050fc] mount_root_generic+0x250/0x324 [c000000003aabca0] [c0000000020057cc] prepare_namespace+0x2d4/0x344 [c000000003aabd20] [c0000000020049bc] kernel_init_freeable+0x358/0x3ac [c000000003aabdf0] [c0000000000111b0] kernel_init+0x30/0x1a0 [c000000003aabe50] [c00000000000debc] ret_from_kernel_user_thread+0x14/0x1c --- interrupt: 0 at 0x0 To avoid ever suppressing a valid pt_regs make sure the pt_regs has a zero MSR and TRAP value, and is located at the very base of the stack. Fixes: 6895dfc0 ("powerpc: copy_thread fill in interrupt frame marker and back chain") Reported-by:
Joel Stanley <joel@jms.id.au> Reported-by:
-
Stanislav Kinsburskii authored
virt_to_phys() doesn't need the address pointer to be mutable. At the same time allowing it to be mutable leads to the following build warning for constant pointers: warning: passing argument 1 of ‘virt_to_phys’ discards ‘const’ qualifier from pointer target type Signed-off-by:
Stanislav Kinsburskii <stanislav.kinsburskii@gmail.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Yang Yingliang authored
Add missing iounmap(), if request_irq() fails. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Benjamin Gray authored
Sparse reports an endianness error with the else case of val = (cpu_endian ? be64_to_cpu(reg_entry->reg_val) : (u64)(reg_entry->reg_val)); This is a safe operation because the code is explicitly working with dynamic endianness, so add the __force annotation to tell Sparse to ignore it. Signed-off-by:Benjamin Gray <bgray@linux.ibm.com> Signed-off-by:
-
Benjamin Gray authored
Sparse reports a warning when casting to an int. There is no need to cast in the first place, so drop them. Signed-off-by:
-
Benjamin Gray authored
Sparse reports dereferencing an __iomem pointer. These routines are clearly low level handlers for IO memory, so force cast away the __iomem annotation to tell sparse the dereferences are safe. Signed-off-by:
-
Benjamin Gray authored
Sparse reports dereference of a __user pointer. copy_mc_to_user() takes a __user pointer, verifies it, then calls the generic copy routine copy_mc_generic(). As we have verified the pointer, cast out the __user annotation when passing to copy_mc_generic(). Signed-off-by:
-
Benjamin Gray authored
Sparse reports an endian mismatch with args to opal_int_get_xirr(). Checking the skiboot source[1] shows the function takes a __be32* (as expected), so update the function declaration to reflect this. [1]: https://github.com/open-power/skiboot/blob/80e2b1dc73/hw/xive.c#L3479Signed-off-by:
-
Benjamin Gray authored
Sparse reports several endianness warnings on variables and functions that are consistently treated as big endian. There are no multi-endianness shenanigans going on here so fix these low hanging fruit up in one patch. All changes are just type annotations; no endianness switching operations are introduced by this patch. Signed-off-by:
-
Benjamin Gray authored
Sparse reports several function implementations annotated with extern. This is clearly incorrect, likely just copied from an actual extern declaration in another file. Fix the sparse warnings by removing extern. Signed-off-by:
-
Benjamin Gray authored
Sparse reports several uses of 0 for pointer arguments and comparisons. Replace with NULL to better convey the intent. Remove entirely if a comparison to follow the kernel style of implicit boolean conversions. Signed-off-by:
-
Benjamin Gray authored
Sparse reports an invalid endian cast here. The code is written for big endian platforms, so le32_to_cpu() acts as a byte reversal. This file is checked by sparse on a little endian build though, so replace the reverse function with the dedicated swab32() function to better express the intent of the code. Signed-off-by:
-
Benjamin Gray authored
Sparse reports a size mismatch in the endian swap. The Opal implementation[1] passes the value as a __be64, and the receiving variable out_qsize is a u64, so the use of be32_to_cpu() appears to be an error. [1]: https://github.com/open-power/skiboot/blob/80e2b1dc73/hw/xive.c#L3854 Fixes: 88ec6b93 ("powerpc/xive: add OPAL extensions for the XIVE native exploitation support") Signed-off-by:
-
Christophe Leroy authored
Introduce PAGE_EXECONLY_X macro which provides exec-only rights. The _X may be seen as redundant with the EXECONLY but it helps keep consistency, all macros having the EXEC right have _X. And put it next to PAGE_NONE as PAGE_EXECONLY_X is somehow PAGE_NONE + EXEC just like all other SOMETHING_X are just SOMETHING + EXEC. On book3s/64 PAGE_EXECONLY becomes PAGE_READONLY_X. On book3s/64, as PAGE_EXECONLY is only valid for Radix add VM_READ flag in vm_get_page_prot() for non-Radix. And update access_error() so that a non exec fault on a VM_EXEC only mapping is always invalid, even when the underlying layer don't always generate a fault for that. For 8xx, set PAGE_EXECONLY_X as _PAGE_NA | _PAGE_EXEC. For others, only set it as just _PAGE_EXEC With that change, 8xx, e500 and 44x fully honor execute-only protection. On 40x that is a partial implementation of execute-only. The implementation won't be complete because once a TLB has been loaded via the Instruction TLB miss handler, it will be possible to read the page. But at least it can't be read unless it is executed first. On 603 MMU, TLB missed are handled by SW and there are separate DTLB and ITLB. Execute-only is therefore now supported by not loading DTLB when read access is not permitted. On hash (604) MMU it is more tricky because hash table is common to load/store and execute. Nevertheless it is still possible to check whether _PAGE_READ is set before loading hash table for a load/store access. At least it can't be read unless it is executed first. Signed-off-by:
-
Christophe Leroy authored
_PAGE_USER is now gone on all targets. Remove it completely. Signed-off-by:
-
Christophe Leroy authored
Instead of always displaying either 'rw' or 'r ' depending on _PAGE_RW, display 'r' or ' ' for _PAGE_READ and 'w' or ' ' for _PAGE_WRITE. Signed-off-by:
-
