Remove leftovers from dbdc configuration since mt7921
does not support it.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Introduce wifi chip reset support for mt7921 device to recover mcu
hangs.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Export mt76_dma_rx_cleanup routine in mt76_queue_ops data structure.
This is a preliminary patch to introduce mt7921 chip reset support.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Introduce mt76_dma_queue_reset utility routine to reset a given hw
queue. This is a preliminary patch to introduce mt7921 chip reset
support.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

This is a preliminary patch to introduce mt7921 chip reset support.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

This is a preliminary patch to introduce chip reset for mt7921 devices.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Introduce mcu_reset function pointer in mt76_mcu_ops structure in order
to run hw related reset function for the mcu running on the chipset.
This is a preliminary patch to introduce chip reset for mt7921 devices.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Reduce mcu timeout for the following uni mcu commands:
- MCU_UNI_CMD_SUSPEND
- MCU_UNI_CMD_OFFLOAD
- MCU_UNI_CMD_HIF_CTRL

This is a preliminary patch to introduce chip reset support
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

ieee80211_register_hw() is called with rtnl_lock held, and this could be
caused lockdep from a work item that's on a workqueue that is flushed
with the rtnl held.

Move mt7915_register_ext_phy() outside the init_work().
Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

This improves performance for second phy.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Use the additional memory barrier to ensure the skb list up-to-date
between the skb producer and consumer to avoid the invalid skb content
written into sdio controller and then cause device hang due to mcu assert
caught by WR_TIMEOUT_INT.

Fixes: 1522ff73 ("mt76: mt7663s: introduce sdio tx aggregation")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Each packet should be padded with the additional zero to become 4-bytes
alignment in sdio tx aggregation.

Fixes: 1522ff73 ("mt76: mt7663s: introduce sdio tx aggregation")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

HW beacon filter command is being applied until we're in associated state
because the command would rely on the associated access point's beacon
interval and DTIM information.

Fixes: 7124198a ("mt76: mt7615: enable beacon filtering by default for offload fw")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Properly check returned values from mcu utility routines in
mt7615_ops.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Properly check returned values from mcu utility routines in
mt7915_ops.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Properly check rate_info to fix unexpected reporting.

[ 1215.161863] Call trace:
[ 1215.164307]  cfg80211_calculate_bitrate+0x124/0x200 [cfg80211]
[ 1215.170139]  ieee80211s_update_metric+0x80/0xc0 [mac80211]
[ 1215.175624]  ieee80211_tx_status_ext+0x508/0x838 [mac80211]
[ 1215.181190]  mt7915_mcu_get_rx_rate+0x28c/0x8d0 [mt7915e]
[ 1215.186580]  mt7915_mac_tx_free+0x324/0x7c0 [mt7915e]
[ 1215.191623]  mt7915_queue_rx_skb+0xa8/0xd0 [mt7915e]
[ 1215.196582]  mt76_dma_cleanup+0x7b0/0x11d0 [mt76]
[ 1215.201276]  __napi_poll+0x38/0xf8
[ 1215.204668]  napi_workfn+0x40/0x80
[ 1215.208062]  process_one_work+0x1fc/0x390
[ 1215.212062]  worker_thread+0x48/0x4d0
[ 1215.215715]  kthread+0x120/0x128
[ 1215.218935]  ret_from_fork+0x10/0x1c

Fixes: e57b7901 ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Fixes: e4c5ead6 ("mt76: mt7915: rename mt7915_mcu_get_rate_info to mt7915_mcu_get_tx_rate")
Reported-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Avoid directly updating sinfo->rxrate from firmware since rate_info might
be overwritten by wrong results even mt7915_mcu_get_rx_rate() fails check.

Add more error handlings accordingly.

Fixes: 11553d88 ("mt76: mt7915: query station rx rate from firmware")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

There are two variants of TP-Link Archer T2UHP V1, which are US and UN:

https://www.tp-link.com/us/support/download/archer-t2uhp/
https://www.tp-link.com/hk/support/download/archer-t2uhp/v1/

From the driver source code provided by the vendor:

https://www.tp-link.com/hk/support/download/archer-t2uhp/v1/#Driver

eric@eric-VirtualBox:~/src$ grep -n USB_DEVICE.*0x2357 DPA_mt7610u_wifi_sta_v3004_rev1_20140529/NETIF/common/rtusb_dev_id.c
45:	{USB_DEVICE(0x2357,0x0105)}, /* T1Uv1 */
46:	{USB_DEVICE(0x2357,0x010B)}, /* T2UHP_UN_v1 */
47:	{USB_DEVICE(0x2357,0x0123)}, /* T2UHP_US_v1 */

eric@eric-VirtualBox:~/src$ lsusb -d 2357:
Bus 001 Device 003: ID 2357:010b TP-Link WiFi
eric@eric-VirtualBox:~/src$ sudo modprobe mt76x0u
eric@eric-VirtualBox:~/src$ sudo sh -c "echo 2357 010b > /sys/bus/usb/drivers/mt76x0u/new_id"

[snip]

eric@eric-VirtualBox:~/src$ ifconfig -a
enp0s3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        ether 08:00:27:74:d9:ee  txqueuelen 1000  (Ethernet)
        RX packets 78  bytes 16146 (16.1 KB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 75  bytes 8413 (8.4 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 56  bytes 5496 (5.4 KB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 56  bytes 5496 (5.4 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlx18d6c71b6e3e: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.106  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 fe80::21c7:2d90:e47d:ee48  prefixlen 64  scopeid 0x20<link>
        ether 18:d6:c7:1b:6e:3e  txqueuelen 1000  (Ethernet)
        RX packets 37  bytes 5345 (5.3 KB)
        RX errors 0  dropped 7  overruns 0  frame 0
        TX packets 77  bytes 10513 (10.5 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eric@eric-VirtualBox:~/src$ dmesg | tail -n 30
               12:51:25.551584 main     Log opened 2021-03-01T12:51:25.551572000Z
[   46.855763] 12:51:25.551995 main     OS Product: Linux
[   46.855838] 12:51:25.552075 main     OS Release: 5.4.0-66-generic
[   46.855897] 12:51:25.552150 main     OS Version: #74-Ubuntu SMP Wed Jan 27 22:54:38 UTC 2021
[   46.855971] 12:51:25.552207 main     Executable: /opt/VBoxGuestAdditions-6.1.16/sbin/VBoxService
               12:51:25.552208 main     Process ID: 898
               12:51:25.552209 main     Package type: LINUX_64BITS_GENERIC
[   46.858699] 12:51:25.554921 main     6.1.16 r140961 started. Verbose level = 0
[   46.863116] 12:51:25.559319 main     vbglR3GuestCtrlDetectPeekGetCancelSupport: Supported (#1)
[  140.687550] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[  140.838279] usb 1-2: New USB device found, idVendor=2357, idProduct=010b, bcdDevice= 1.00
[  140.838281] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  140.838283] usb 1-2: Product: WiFi
[  140.838284] usb 1-2: Manufacturer: MediaTek
[  140.838285] usb 1-2: SerialNumber: 1.0
[  178.374187] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[  178.378370] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[  178.417507] usbcore: registered new interface driver mt76x0u
[  178.557165] usb 1-2: reset high-speed USB device number 3 using xhci_hcd
[  178.720436] mt76x0u 1-2:1.0: ASIC revision: 76100002 MAC revision: 76502000
[  180.156077] mt76x0u 1-2:1.0: EEPROM ver:02 fae:04
[  181.190558] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[  181.225560] mt76x0u 1-2:1.0 wlx18d6c71b6e3e: renamed from wlan0
[  188.660826] wlx18d6c71b6e3e: authenticate with d0:17:c2:e0:d7:9c
[  189.447781] wlx18d6c71b6e3e: send auth to d0:17:c2:e0:d7:9c (try 1/3)
[  189.618282] wlx18d6c71b6e3e: authenticated
[  189.619008] wlx18d6c71b6e3e: associate with d0:17:c2:e0:d7:9c (try 1/3)
[  189.715268] wlx18d6c71b6e3e: RX AssocResp from d0:17:c2:e0:d7:9c (capab=0x1011 status=0 aid=8)
[  189.734720] wlx18d6c71b6e3e: associated
[  190.233239] IPv6: ADDRCONF(NETDEV_CHANGE): wlx18d6c71b6e3e: link becomes ready
Signed-off-by: Eric Y.Y. Wong <eric.wongyeungyan@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Fix PHY mode configuration for DBDC.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Stop Tx burst for ext_phy after mac reset.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Add CSA notification for second phy.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Stop Tx burst for ext_phy after mac reset.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Add CSA notification for second phy.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

This improves dbdc performance.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Properly check returned values from mcu utility routines in
mt7921_start.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

We should change the base for the dynamic remap into another one, because
the current base (0xe0000) have been the one used to operate the device
ownership.

Fixes: 163f4d22 ("mt76: mt7921: add MAC support")
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Should use 0x10000 as the base to operate PCIe interrupt according
to the vendor reference driver.

Fixes: ffa1bf97 ("mt76: mt7921: introduce PM support")
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Since the rate selection is currently managed by the fw, get rid of
empty mt7921_sta_rc_update routine
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Since mt76_txq_send_burst routine can report a negative error code,
check the returned value before incrementing the number of transmitted
frames in mt76_txq_schedule_list routine.
Return -EBUSY directly if the device is in reset or in power management.

Fixes: 90fdc171 ("mt76: use mac80211 txq scheduling")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Fix the following kernel warning adding a monitor interface in
mt76_connac_mcu_uni_add_dev routine.

[  507.984882] ------------[ cut here ]------------
[  507.989515] WARNING: CPU: 1 PID: 3017 at mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib]
[  508.059379] CPU: 1 PID: 3017 Comm: ifconfig Not tainted 5.4.98 #0
[  508.065461] Hardware name: MT7622_MT7531 RFB (DT)
[  508.070156] pstate: 80000005 (Nzcv daif -PAN -UAO)
[  508.074939] pc : mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib]
[  508.081806] lr : mt7921_eeprom_init+0x1288/0x1cb8 [mt7921e]
[  508.087367] sp : ffffffc013a33930
[  508.090671] x29: ffffffc013a33930 x28: ffffff801e628ac0
[  508.095973] x27: ffffff801c7f1200 x26: ffffff801c7eb008
[  508.101275] x25: ffffff801c7eaef0 x24: ffffff801d025610
[  508.106577] x23: ffffff801d022990 x22: ffffff801d024de8
[  508.111879] x21: ffffff801d0226a0 x20: ffffff801c7eaee8
[  508.117181] x19: ffffff801d0226a0 x18: 000000005d00b000
[  508.122482] x17: 00000000ffffffff x16: 0000000000000000
[  508.127785] x15: 0000000000000080 x14: ffffff801d704000
[  508.133087] x13: 0000000000000040 x12: 0000000000000002
[  508.138389] x11: 000000000000000c x10: 0000000000000000
[  508.143691] x9 : 0000000000000020 x8 : 0000000000000001
[  508.148992] x7 : 0000000000000000 x6 : 0000000000000000
[  508.154294] x5 : ffffff801c7eaee8 x4 : 0000000000000006
[  508.159596] x3 : 0000000000000001 x2 : 0000000000000000
[  508.164898] x1 : ffffff801c7eac08 x0 : ffffff801d0226a0
[  508.170200] Call trace:
[  508.172640]  mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib]
[  508.179159]  mt7921_eeprom_init+0x1288/0x1cb8 [mt7921e]
[  508.184394]  drv_add_interface+0x34/0x88 [mac80211]
[  508.189271]  ieee80211_add_virtual_monitor+0xe0/0xb48 [mac80211]
[  508.195277]  ieee80211_do_open+0x86c/0x918 [mac80211]
[  508.200328]  ieee80211_do_open+0x900/0x918 [mac80211]
[  508.205372]  __dev_open+0xcc/0x150
[  508.208763]  __dev_change_flags+0x134/0x198
[  508.212937]  dev_change_flags+0x20/0x60
[  508.216764]  devinet_ioctl+0x3e8/0x748
[  508.220503]  inet_ioctl+0x1e4/0x350
[  508.223983]  sock_do_ioctl+0x48/0x2a0
[  508.227635]  sock_ioctl+0x310/0x4f8
[  508.231116]  do_vfs_ioctl+0xa4/0xac0
[  508.234681]  ksys_ioctl+0x44/0x90
[  508.237985]  __arm64_sys_ioctl+0x1c/0x48
[  508.241901]  el0_svc_common.constprop.1+0x7c/0x100
[  508.246681]  el0_svc_handler+0x18/0x20
[  508.250421]  el0_svc+0x8/0x1c8
[  508.253465] ---[ end trace c7b90fee13d72c39 ]---
[  508.261278] ------------[ cut here ]------------

Fixes: d0e274af ("mt76: mt76_connac: create mcu library")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

In order to properly report MIB counters to mac80211, resets stats in
mt7915_get_stats routine() and hold mt76 mutex accessing MIB counters.
Sum up MIB counters in mt7915_mac_update_mib_stats routine.

Fixes: e57b7901 ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

In order to properly report MIB counters to mac80211, resets stats in
mt7615_get_stats routine and hold mt76 mutex accessing MIB counters.
Sum up MIB counters in mt7615_mac_update_mib_stats routine.

Fixes: c388d858 ("mt76: mt7615: add a get_stats() callback")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Only mt7615 uses v1 version. Also, some of released firmware doesn't
have hdr->fw_ver.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

The index of TSF counters should follow HWBSSID.

Fixes: d8d59f66 ("mt76: mt7615: support 16 interfaces")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Fix register definitions for mac80211 stats reporting.
Move mib counter reset to mt7921_get_stats routine.

Fixes: 163f4d22 ("mt76: mt7921: add MAC support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Fix the following coccicheck warnings:

./drivers/net/wireless/mediatek/mt76/mt7921/mac.c:1402:2-3: Unneeded
semicolon.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Similar to mt7921, fix 802.11 aggr len debugfs reporting for mt7915 driver.

Fixes: e57b7901 ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Fix register definitions for 802.11 aggr length histogram estimation.

Fixes: 474a9f21 ("mt76: mt7921: add debugfs support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Similar to the issue fixed in mt7921_coredump_work, fix a possible memory
leak in mt7615_coredump_work routine.

Fixes: d2bf7959 ("mt76: mt7663: introduce coredump support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

For AP and Client mode, the hardware can pass received packets
as 802.3 frames that can be passed to the network stack as-is.
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>