1. 03 Mar, 2014 4 commits
  2. 28 Feb, 2014 2 commits
  3. 27 Feb, 2014 9 commits
  4. 26 Feb, 2014 9 commits
    • Nikolay Aleksandrov's avatar
      bonding: fix a div error caused by the slave release path · ee6154e1
      Nikolay Aleksandrov authored
      There's a bug in the slave release function which leads the transmit
      functions which use the bond->slave_cnt to a div by 0 because we might
      just have released our last slave and made slave_cnt == 0 but at the same
      time we may have a transmitter after the check for an empty list which will
      fetch it and use it in the slave id calculation.
      Fix it by moving the slave_cnt after synchronize_rcu so if this was our
      last slave any new transmitters will see an empty slave list which is
      checked after rcu lock but before calling the mode transmit functions
      which rely on bond->slave_cnt.
      
      Fixes: 278b2083 ("bonding: initial RCU conversion")
      
      CC: Veaceslav Falico <vfalico@redhat.com>
      CC: Andy Gospodarek <andy@greyhouse.net>
      CC: Jay Vosburgh <fubar@us.ibm.com>
      CC: David S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarNikolay Aleksandrov <nikolay@redhat.com>
      Acked-by: default avatarVeaceslav Falico <vfalico@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ee6154e1
    • Freddy Xin's avatar
      AX88179_178A: Add VID:DID for Lenovo OneLinkDock Gigabit LAN · e5fe0cd4
      Freddy Xin authored
      Add VID:DID for Lenovo OneLinkDock Gigabit LAN
      Signed-off-by: default avatarFreddy Xin <freddy@asix.com.tw>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e5fe0cd4
    • David S. Miller's avatar
      Merge branch 'bonding_rtnl' · 5d6dd5bf
      David S. Miller authored
      Ding Tianhong says:
      
      ====================
      Fix RTNL: assertion failed at net/core/rtnetlink.c
      
      The commit 1d3ee88a
      (bonding: add netlink attributes to slave link dev)
      make the bond_set_active_slave() and bond_set_backup_slave()
      use rtmsg_ifinfo to send slave's states and this functions
      should be called in RTNL.
      
      But the 902.3ad and ARP monitor did not hold the RTNL when calling
      thses two functions, so fix them.
      
      v1->v2: Add new micro to indicate that the notification should be send
              later, not never.
              And add a new patch to fix the same problem for ARP mode.
      
      v2->v3: modify the bond_should_notify to should_notify_rtnl, it is more
      	reasonable, and	use bool for should_notify_rtnl.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5d6dd5bf
    • dingtianhong's avatar
      bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor · b0929915
      dingtianhong authored
      Veaceslav has reported and fix this problem by commit f2ebd477
      (bonding: restructure locking of bond_ab_arp_probe()). According Jay's
      opinion, the current solution is not very well, because the notification
      is to indicate that the interface has actually changed state in a meaningful
      way, but these calls in the ab ARP monitor are internal settings of the flags
      to allow the ARP monitor to search for a slave to become active when there are
      no active slaves. The flag setting to active or backup is to permit the ARP
      monitor's response logic to do the right thing when deciding if the test
      slave (current_arp_slave) is up or not.
      
      So the best way to fix the problem is that we should not send a notification
      when the slave is in testing state, and check the state at the end of the
      monitor, if the slave's state recover, avoid to send pointless notification
      twice. And RTNL is really a big lock, hold it regardless the slave's state
      changed or not when the current_active_slave is null will loss performance
      (every 100ms), so we should hold it only when the slave's state changed and
      need to notify.
      
      I revert the old commit and add new modifications.
      
      Cc: Jay Vosburgh <fubar@us.ibm.com>
      Cc: Veaceslav Falico <vfalico@redhat.com>
      Cc: Andy Gospodarek <andy@greyhouse.net>
      Signed-off-by: default avatarDing Tianhong <dingtianhong@huawei.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b0929915
    • dingtianhong's avatar
      bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for 802.3ad mode · 5e5b0665
      dingtianhong authored
      The problem was introduced by the commit 1d3ee88a
      (bonding: add netlink attributes to slave link dev).
      The bond_set_active_slave() and bond_set_backup_slave()
      will use rtmsg_ifinfo to send slave's states, so these
      two functions should be called in RTNL.
      
      In 802.3ad mode, acquiring RTNL for the __enable_port and
      __disable_port cases is difficult, as those calls generally
      already hold the state machine lock, and cannot unconditionally
      call rtnl_lock because either they already hold RTNL (for calls
      via bond_3ad_unbind_slave) or due to the potential for deadlock
      with bond_3ad_adapter_speed_changed, bond_3ad_adapter_duplex_changed,
      bond_3ad_link_change, or bond_3ad_update_lacp_rate.  All four of
      those are called with RTNL held, and acquire the state machine lock
      second.  The calling contexts for __enable_port and __disable_port
      already hold the state machine lock, and may or may not need RTNL.
      
      According to the Jay's opinion, I don't think it is a problem that
      the slave don't send notify message synchronously when the status
      changed, normally the state machine is running every 100 ms, send
      the notify message at the end of the state machine if the slave's
      state changed should be better.
      
      I fix the problem through these steps:
      
      1). add a new function bond_set_slave_state() which could change
          the slave's state and call rtmsg_ifinfo() according to the input
          parameters called notify.
      
      2). Add a new slave parameter which called should_notify, if the slave's state
          changed and don't notify yet, the parameter will be set to 1, and then if
          the slave's state changed again, the param will be set to 0, it indicate that
          the slave's state has been restored, no need to notify any one.
      
      3). the __enable_port and __disable_port should not call rtmsg_ifinfo
          in the state machine lock, any change in the state of slave could
          set a flag in the slave, it will indicated that an rtmsg_ifinfo
          should be called at the end of the state machine.
      
      Cc: Jay Vosburgh <fubar@us.ibm.com>
      Cc: Veaceslav Falico <vfalico@redhat.com>
      Cc: Andy Gospodarek <andy@greyhouse.net>
      Signed-off-by: default avatarDing Tianhong <dingtianhong@huawei.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5e5b0665
    • Joe Perches's avatar
      MAINTAINERS: Intel nic drivers · bc90d291
      Joe Perches authored
      Add a new F: line for the intel subdirectories.
      
      This allows get_maintainers to avoid using git log
      and cc'ing people that have submitted clean-up style
      patches for all first level directories under
      drivers/net/ethernet/intel/
      
      This does not make e100.c maintained.
      Signed-off-by: default avatarJoe Perches <joe@perches.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bc90d291
    • Edward Cree's avatar
      sfc: check for NULL efx->ptp_data in efx_ptp_event · 8f355e5c
      Edward Cree authored
      If we receive a PTP event from the NIC when we haven't set up PTP state
      in the driver, we attempt to read through a NULL pointer efx->ptp_data,
      triggering a panic.
      Signed-off-by: default avatarEdward Cree <ecree@solarflare.com>
      Acked-by: default avatarShradha Shah <sshah@solarflare.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8f355e5c
    • Eric Dumazet's avatar
      net: tcp: use NET_INC_STATS() · 9a9bfd03
      Eric Dumazet authored
      While LINUX_MIB_TCPSPURIOUS_RTX_HOSTQUEUES can only be incremented
      in tcp_transmit_skb() from softirq (incoming message or timer
      activation), it is better to use NET_INC_STATS() instead of
      NET_INC_STATS_BH() as tcp_transmit_skb() can be called from process
      context.
      
      This will avoid copy/paste confusion when/if we want to add
      other SNMP counters in tcp_transmit_skb()
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
      Cc: Florian Westphal <fw@strlen.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9a9bfd03
    • Steffen Klassert's avatar
      xfrm: Fix unlink race when policies are deleted. · 3a9016f9
      Steffen Klassert authored
      When a policy is unlinked from the lists in thread context,
      the xfrm timer can fire before we can mark this policy as dead.
      So reinitialize the bydst hlist, then hlist_unhashed() will
      notice that this policy is not linked and will avoid a
      doulble unlink of that policy.
      Reported-by: default avatarXianpeng Zhao <673321875@qq.com>
      Signed-off-by: default avatarSteffen Klassert <steffen.klassert@secunet.com>
      3a9016f9
  5. 25 Feb, 2014 15 commits
  6. 24 Feb, 2014 1 commit