- 10 Mar, 2019 12 commits
-
-
Tetsuo Handa authored
commit ecd182cb upstream. ashmem_pin() is calling range_shrink() without checking whether range_alloc() succeeded. Also, doing memory allocation with ashmem_mutex held should be avoided because ashmem_shrink_scan() tries to hold it. Therefore, move memory allocation for range_alloc() to ashmem_pin_unpin() and make range_alloc() not to fail. This patch is mostly meant for backporting purpose for fuzz testing on stable/distributor kernels, for there is a plan to remove this code in near future. Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable@vger.kernel.org Reviewed-by:
Joel Fernandes <joel@joelfernandes.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tetsuo Handa authored
commit fb4415a1 upstream. syzbot is hitting lockdep warnings [1][2][3]. This patch tries to fix the warning by eliminating ashmem_shrink_scan() => {shmem|vfs}_fallocate() sequence. [1] https://syzkaller.appspot.com/bug?id=87c399f6fa6955006080b24142e2ce7680295ad4 [2] https://syzkaller.appspot.com/bug?id=7ebea492de7521048355fc84210220e1038a7908 [3] https://syzkaller.appspot.com/bug?id=e02419c12131c24e2a957ea050c2ab6dcbbc3270Reported-by:
syzbot <syzbot+a76129f18c89f3e2ddd4@syzkaller.appspotmail.com> Reported-by:
syzbot <syzbot+148c2885d71194f18d28@syzkaller.appspotmail.com> Reported-by:
syzbot <syzbot+4b8b031b89e6b96c4b2e@syzkaller.appspotmail.com> Signed-off-by:
-
Qing Xia authored
commit 9bcf065e upstream. In the first loop, gfp_flags will be modified to high_order_gfp_flags, and there will be no chance to change back to low_order_gfp_flags. Fixes: e7f63771 ("ION: Sys_heap: Add cached pool to spead up cached buffer alloc") Signed-off-by:
Qing Xia <saberlily.xia@hisilicon.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Jing Xia <jing.xia@unisoc.com> Reviewed-by:
Yuming Han <yuming.han@unisoc.com> Reviewed-by:
Zhaoyang Huang <zhaoyang.huang@unisoc.com> Reviewed-by:
Orson Zhai <orson.zhai@unisoc.com> Signed-off-by:
-
Ajay Singh authored
commit dda03705 upstream. Set correct value in '->vif_num' for the total number of interfaces and set '->idx' value using 'i'. Fixes: 735bb39c ("staging: wilc1000: simplify vif[i]->ndev accesses") Fixes: 0e490657 ("staging: wilc1000: Fix problem with wrong vif index") Cc: <stable@vger.kernel.org> Suggested-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Gustavo A. R. Silva authored
commit 479826cc upstream. Add missing break statement in order to prevent the code from falling through to the default case and return -EINVAL every time. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: aa94f288 ("staging: comedi: ni_660x: tidy up ni_660x_set_pfi_routing()") Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Gao Xiang authored
commit af692e11 upstream. This patch resolves the following page use-after-free issue, z_erofs_vle_unzip: ... for (i = 0; i < nr_pages; ++i) { ... z_erofs_onlinepage_endio(page); (1) } for (i = 0; i < clusterpages; ++i) { page = compressed_pages[i]; if (page->mapping == mngda) (2) continue; /* recycle all individual staging pages */ (void)z_erofs_gather_if_stagingpage(page_pool, page); (3) WRITE_ONCE(compressed_pages[i], NULL); } ... After (1) is executed, page is freed and could be then reused, if compressed_pages is scanned after that, it could fall info (2) or (3) by mistake and that could finally be in a mess. This patch aims to solve the above issue only with little changes as much as possible in order to make the fix backport easier. Fixes: 3883a79a ("staging: erofs: introduce VLE decompression support") Cc: <stable@vger.kernel.org> # 4.19+ Signed-off-by:
Gao Xiang <gaoxiang25@huawei.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
-
Gao Xiang authored
commit 1e5ceeab upstream. Considering a read request with two decompressed file pages, If a decompression work cannot be started on the previous page due to memory pressure but in-memory LTP map lookup is done, builder->work should be still NULL. Moreover, if the current page also belongs to the same map, it won't try to start the decompression work again and then run into trouble. This patch aims to solve the above issue only with little changes as much as possible in order to make the fix backport easier. kernel message is: <4>[1051408f.015930s]SLUB: Unable to allocate memory on node -1, gfp=0x2408040(GFP_NOFS|__GFP_ZERO) <4>[1051408f.015930s] cache: erofs_compress, object size: 144, buffer size: 144, default order: 0, min order: 0 <4>[1051408f.015930s] node 0: slabs: 98, objs: 2744, free: 0 * Cannot allocate the decompression work <3>[1051408f.015960s]erofs: z_erofs_vle_normalaccess_readpages, readahead error at page 1008 of nid 5391488 * Note that the previous page was failed to read <0>[1051408f.015960s]Internal error: Accessing user space memory outside uaccess.h routines: 96000005 [#1] PREEMPT SMP ... <4>[1051408f.015991s]Hardware name: kirin710 (DT) ... <4>[1051408f.016021s]PC is at z_erofs_vle_work_add_page+0xa0/0x17c <4>[1051408f.016021s]LR is at z_erofs_do_read_page+0x12c/0xcf0 ... <4>[1051408f.018096s][<ffffff80c6fb0fd4>] z_erofs_vle_work_add_page+0xa0/0x17c <4>[1051408f.018096s][<ffffff80c6fb3814>] z_erofs_vle_normalaccess_readpages+0x1a0/0x37c <4>[1051408f.018096s][<ffffff80c6d670b8>] read_pages+0x70/0x190 <4>[1051408f.018127s][<ffffff80c6d6736c>] __do_page_cache_readahead+0x194/0x1a8 <4>[1051408f.018127s][<ffffff80c6d59318>] filemap_fault+0x398/0x684 <4>[1051408f.018127s][<ffffff80c6d8a9e0>] __do_fault+0x8c/0x138 <4>[1051408f.018127s][<ffffff80c6d8f90c>] handle_pte_fault+0x730/0xb7c <4>[1051408f.018127s][<ffffff80c6d8fe04>] __handle_mm_fault+0xac/0xf4 <4>[1051408f.018157s][<ffffff80c6d8fec8>] handle_mm_fault+0x7c/0x118 <4>[1051408f.018157s][<ffffff80c8c52998>] do_page_fault+0x354/0x474 <4>[1051408f.018157s][<ffffff80c8c52af8>] do_translation_fault+0x40/0x48 <4>[1051408f.018157s][<ffffff80c6c002f4>] do_mem_abort+0x80/0x100 <4>[1051408f.018310s]---[ end trace 9f4009a3283bd78b ]--- Fixes: 3883a79a ("staging: erofs: introduce VLE decompression support") Cc: <stable@vger.kernel.org> # 4.19+ Signed-off-by:
-
Mans Rullgard authored
commit 8d7fa3d4 upstream. This adds the USB ID of the Hjelmslund Electronics USB485 Iso stick. Signed-off-by:
Mans Rullgard <mans@mansr.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Ivan Mironov authored
commit dd9d3d86 upstream. Here is how this device appears in kernel log: usb 3-1: new full-speed USB device number 18 using xhci_hcd usb 3-1: New USB device found, idVendor=0b00, idProduct=3070 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-1: Product: Ingenico 3070 usb 3-1: Manufacturer: Silicon Labs usb 3-1: SerialNumber: 0001 Apparently this is a POS terminal with embedded USB-to-Serial converter. Cc: stable@vger.kernel.org Signed-off-by:
Ivan Mironov <mironov.ivan@gmail.com> Signed-off-by:
-
Daniele Palmas authored
commit 6431866b upstream. This patch adds Telit ME910 family ECM composition 0x1102. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Gao Xiang authored
commit a112152f upstream. EROFS has an optimized path called TAIL merging, which is designed to merge multiple reads and the corresponding decompressions into one if these requests read continuous pages almost at the same time. In general, it behaves as follows: ________________________________________________________________ ... | TAIL . HEAD | PAGE | PAGE | TAIL . HEAD | ... _____|_combined page A_|________|________|_combined page B_|____ 1 ] -> [ 2 ] -> [ 3 If the above three reads are requested in the order 1-2-3, it will generate a large work chain rather than 3 individual work chains to reduce scheduling overhead and boost up sequential read. However, if Read 2 is processed slightly earlier than Read 1, currently it still generates 2 individual work chains (chain 1, 2) but it does in-place decompression for combined page A, moreover, if chain 2 decompresses ahead of chain 1, it will be a race and lead to corrupted decompressed page. This patch fixes it. Fixes: 3883a79a ("staging: erofs: introduce VLE decompression support") Cc: <stable@vger.kernel.org> # 4.19+ Signed-off-by:
-
Viresh Kumar authored
commit 625c85a6 upstream. The cpufreq_global_kobject is created using kobject_create_and_add() helper, which assigns the kobj_type as dynamic_kobj_ktype and show/store routines are set to kobj_attr_show() and kobj_attr_store(). These routines pass struct kobj_attribute as an argument to the show/store callbacks. But all the cpufreq files created using the cpufreq_global_kobject expect the argument to be of type struct attribute. Things work fine currently as no one accesses the "attr" argument. We may not see issues even if the argument is used, as struct kobj_attribute has struct attribute as its first element and so they will both get same address. But this is logically incorrect and we should rather use struct kobj_attribute instead of struct global_attr in the cpufreq core and drivers and the show/store callbacks should take struct kobj_attribute as argument instead. This bug is caught using CFI CLANG builds in android kernel which catches mismatch in function prototypes for such callbacks. Reported-by:
Donghee Han <dh.han@samsung.com> Reported-by:
Sangkyu Kim <skwith.kim@samsung.com> Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
- 05 Mar, 2019 28 commits
-
-
Greg Kroah-Hartman authored
-
Andy Lutomirski authored
commit 2a418cf3 upstream. When calling __put_user(foo(), ptr), the __put_user() macro would call foo() in between __uaccess_begin() and __uaccess_end(). If that code were buggy, then those bugs would be run without SMAP protection. Fortunately, there seem to be few instances of the problem in the kernel. Nevertheless, __put_user() should be fixed to avoid doing this. Therefore, evaluate __put_user()'s argument before setting AC. This issue was noticed when an objtool hack by Peter Zijlstra complained about genregs_get() and I compared the assembly output to the C source. [ bp: Massage commit message and fixed up whitespace. ] Fixes: 11f1a4b9 ("x86: reorganize SMAP handling in user space accesses") Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20190225125231.845656645@infradead.orgSigned-off-by:
-
Paul Burton authored
commit d1a2930d upstream. The MIPS eBPF JIT calls flush_icache_range() in order to ensure the icache observes the code that we just wrote. Unfortunately it gets the end address calculation wrong due to some bad pointer arithmetic. The struct jit_ctx target field is of type pointer to u32, and as such adding one to it will increment the address being pointed to by 4 bytes. Therefore in order to find the address of the end of the code we simply need to add the number of 4 byte instructions emitted, but we mistakenly add the number of instructions multiplied by 4. This results in the call to flush_icache_range() operating on a memory region 4x larger than intended, which is always wasteful and can cause crashes if we overrun into an unmapped page. Fix this by correcting the pointer arithmetic to remove the bogus multiplication, and use braces to remove the need for a set of brackets whilst also making it obvious that the target field is a pointer. Signed-off-by:
Paul Burton <paul.burton@mips.com> Fixes: b6bd53f9 ("MIPS: Add missing file for eBPF JIT.") Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: netdev@vger.kernel.org Cc: bpf@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # v4.13+ Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Jonas Gorski authored
commit 18836b48 upstream. The switch to the generic dma ops made dma masks mandatory, breaking devices having them not set. In case of bcm63xx, it broke ethernet with the following warning when trying to up the device: [ 2.633123] ------------[ cut here ]------------ [ 2.637949] WARNING: CPU: 0 PID: 325 at ./include/linux/dma-mapping.h:516 bcm_enetsw_open+0x160/0xbbc [ 2.647423] Modules linked in: gpio_button_hotplug [ 2.652361] CPU: 0 PID: 325 Comm: ip Not tainted 4.19.16 #0 [ 2.658080] Stack : 80520000 804cd3ec 00000000 00000000 804ccc00 87085bdc 87d3f9d4 804f9a17 [ 2.666707] 8049cf18 00000145 80a942a0 00000204 80ac0000 10008400 87085b90 eb3d5ab7 [ 2.675325] 00000000 00000000 80ac0000 000022b0 00000000 00000000 00000007 00000000 [ 2.683954] 0000007a 80500000 0013b381 00000000 80000000 00000000 804a1664 80289878 [ 2.692572] 00000009 00000204 80ac0000 00000200 00000002 00000000 00000000 80a90000 [ 2.701191] ... [ 2.703701] Call Trace: [ 2.706244] [<8001f3c8>] show_stack+0x58/0x100 [ 2.710840] [<800336e4>] __warn+0xe4/0x118 [ 2.715049] [<800337d4>] warn_slowpath_null+0x48/0x64 [ 2.720237] [<80289878>] bcm_enetsw_open+0x160/0xbbc [ 2.725347] [<802d1d4c>] __dev_open+0xf8/0x16c [ 2.729913] [<802d20cc>] __dev_change_flags+0x100/0x1c4 [ 2.735290] [<802d21b8>] dev_change_flags+0x28/0x70 [ 2.740326] [<803539e0>] devinet_ioctl+0x310/0x7b0 [ 2.745250] [<80355fd8>] inet_ioctl+0x1f8/0x224 [ 2.749939] [<802af290>] sock_ioctl+0x30c/0x488 [ 2.754632] [<80112b34>] do_vfs_ioctl+0x740/0x7dc [ 2.759459] [<80112c20>] ksys_ioctl+0x50/0x94 [ 2.763955] [<800240b8>] syscall_common+0x34/0x58 [ 2.768782] ---[ end trace fb1a6b14d74e28b6 ]--- [ 2.773544] bcm63xx_enetsw bcm63xx_enetsw.0: cannot allocate rx ring 512 Fix this by adding appropriate DMA masks for the platform devices. Fixes: f8c55dc6 ("MIPS: use generic dma noncoherent ops for simple noncoherent platforms") Signed-off-by:
Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Michael Clark authored
commit 94ee12b5 upstream. __cmpxchg_small erroneously uses u8 for load comparison which can be either char or short. This patch changes the local variable to u32 which is sufficiently sized, as the loaded value is already masked and shifted appropriately. Using an integer size avoids any unnecessary canonicalization from use of non native widths. This patch is part of a series that adapts the MIPS small word atomics code for xchg and cmpxchg on short and char to RISC-V. Cc: RISC-V Patches <patches@groups.riscv.org> Cc: Linux RISC-V <linux-riscv@lists.infradead.org> Cc: Linux MIPS <linux-mips@linux-mips.org> Signed-off-by:
Michael Clark <michaeljclark@mac.com> [paul.burton@mips.com: - Fix varialble typo per Jonas Gorski. - Consolidate load variable with other declarations.] Signed-off-by:
-
Mike Kravetz authored
commit cb6acd01 upstream. hugetlb pages should only be migrated if they are 'active'. The routines set/clear_page_huge_active() modify the active state of hugetlb pages. When a new hugetlb page is allocated at fault time, set_page_huge_active is called before the page is locked. Therefore, another thread could race and migrate the page while it is being added to page table by the fault code. This race is somewhat hard to trigger, but can be seen by strategically adding udelay to simulate worst case scheduling behavior. Depending on 'how' the code races, various BUG()s could be triggered. To address this issue, simply delay the set_page_huge_active call until after the page is successfully added to the page table. Hugetlb pages can also be leaked at migration time if the pages are associated with a file in an explicitly mounted hugetlbfs filesystem. For example, consider a two node system with 4GB worth of huge pages available. A program mmaps a 2G file in a hugetlbfs filesystem. It then migrates the pages associated with the file from one node to another. When the program exits, huge page counts are as follows: node0 1024 free_hugepages 1024 nr_hugepages node1 0 free_hugepages 1024 nr_hugepages Filesystem Size Used Avail Use% Mounted on nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool That is as expected. 2G of huge pages are taken from the free_hugepages counts, and 2G is the size of the file in the explicitly mounted filesystem. If the file is then removed, the counts become: node0 1024 free_hugepages 1024 nr_hugepages node1 1024 free_hugepages 1024 nr_hugepages Filesystem Size Used Avail Use% Mounted on nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool Note that the filesystem still shows 2G of pages used, while there actually are no huge pages in use. The only way to 'fix' the filesystem accounting is to unmount the filesystem If a hugetlb page is associated with an explicitly mounted filesystem, this information in contained in the page_private field. At migration time, this information is not preserved. To fix, simply transfer page_private from old to new page at migration time if necessary. There is a related race with removing a huge page from a file and migration. When a huge page is removed from the pagecache, the page_mapping() field is cleared, yet page_private remains set until the page is actually freed by free_huge_page(). A page could be migrated while in this state. However, since page_mapping() is not set the hugetlbfs specific routine to transfer page_private is not called and we leak the page count in the filesystem. To fix that, check for this condition before migrating a huge page. If the condition is detected, return EBUSY for the page. Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com Fixes: bcc54222 ("mm: hugetlb: introduce page_huge_active") Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: <stable@vger.kernel.org> [mike.kravetz@oracle.com: v2] Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com [mike.kravetz@oracle.com: update comment and changelog] Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.comSigned-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Nicholas Kazlauskas authored
commit 22163229 upstream. The prepare_fb call always happens on new_plane_state. The drm_atomic_helper_cleanup_planes checks to see if plane state pointer has changed when deciding to call cleanup_fb on either the new_plane_state or the old_plane_state. For a non-async atomic commit the state pointer is swapped, so this helper calls prepare_fb on the new_plane_state and cleanup_fb on the old_plane_state. This makes sense, since we want to prepare the framebuffer we are going to use and cleanup the the framebuffer we are no longer using. For the async atomic update helpers this differs. The async atomic update helpers perform in-place updates on the existing state. They call drm_atomic_helper_cleanup_planes but the state pointer is not swapped. This means that prepare_fb is called on the new_plane_state and cleanup_fb is called on the new_plane_state (not the old). In the case where old_plane_state->fb == new_plane_state->fb then there should be no behavioral difference between an async update and a non-async commit. But there are issues that arise when old_plane_state->fb != new_plane_state->fb. The first is that the new_plane_state->fb is immediately cleaned up after it has been prepared, so we're using a fb that we shouldn't be. The second occurs during a sequence of async atomic updates and non-async regular atomic commits. Suppose there are two framebuffers being interleaved in a double-buffering scenario, fb1 and fb2: - Async update, oldfb = NULL, newfb = fb1, prepare fb1, cleanup fb1 - Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb2 - Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2 We call cleanup_fb on fb2 twice in this example scenario, and any further use will result in use-after-free. The simple fix to this problem is to block framebuffer changes in the drm_atomic_helper_async_check function for now. v2: Move check by itself, add a FIXME (Daniel) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Cc: <stable@vger.kernel.org> # v4.14+ Fixes: fef9df8b ("drm/atomic: initial support for asynchronous plane update") Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Jann Horn authored
commit 0a1d5299 upstream. security_mmap_addr() does a capability check with current_cred(), but we can reach this code from contexts like a VFS write handler where current_cred() must not be used. This can be abused on systems without SMAP to make NULL pointer dereferences exploitable again. Fixes: 8869477a ("security: protect from stack expansion into low vm addresses") Cc: stable@kernel.org Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
-
BOUGH CHEN authored
commit e30be063 upstream. Commit 18094430 ("mmc: sdhci-esdhc-imx: add ADMA Length Mismatch errata fix") involve the fix of ERR004536, but the fix is incorrect. Double confirm with IC, need to clear the bit 7 of register 0x6c rather than set this bit 7. Here is the definition of bit 7 of 0x6c: 0: enable the new IC fix for ERR004536 1: do not use the IC fix, keep the same as before Find this issue on i.MX845s-evk board when enable CMDQ, and let system in heavy loading. root@imx8mmevk:~# dd if=/dev/mmcblk2 of=/dev/null bs=1M & root@imx8mmevk:~# memtester 1000M > /dev/zero & root@imx8mmevk:~# [ 139.897220] mmc2: cqhci: timeout for tag 16 [ 139.901417] mmc2: cqhci: ============ CQHCI REGISTER DUMP =========== [ 139.907862] mmc2: cqhci: Caps: 0x0000310a | Version: 0x00000510 [ 139.914311] mmc2: cqhci: Config: 0x00001001 | Control: 0x00000000 [ 139.920753] mmc2: cqhci: Int stat: 0x00000000 | Int enab: 0x00000006 [ 139.927193] mmc2: cqhci: Int sig: 0x00000006 | Int Coal: 0x00000000 [ 139.933634] mmc2: cqhci: TDL base: 0x7809c000 | TDL up32: 0x00000000 [ 139.940073] mmc2: cqhci: Doorbell: 0x00030000 | TCN: 0x00000000 [ 139.946518] mmc2: cqhci: Dev queue: 0x00010000 | Dev Pend: 0x00010000 [ 139.952967] mmc2: cqhci: Task clr: 0x00000000 | SSC1: 0x00011000 [ 139.959411] mmc2: cqhci: SSC2: 0x00000001 | DCMD rsp: 0x00000000 [ 139.965857] mmc2: cqhci: RED mask: 0xfdf9a080 | TERRI: 0x00000000 [ 139.972308] mmc2: cqhci: Resp idx: 0x0000002e | Resp arg: 0x00000900 [ 139.978761] mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== [ 139.985214] mmc2: sdhci: Sys addr: 0xb2c19000 | Version: 0x00000002 [ 139.991669] mmc2: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000400 [ 139.998127] mmc2: sdhci: Argument: 0x40110400 | Trn mode: 0x00000033 [ 140.004618] mmc2: sdhci: Present: 0x01088a8f | Host ctl: 0x00000030 [ 140.011113] mmc2: sdhci: Power: 0x00000002 | Blk gap: 0x00000080 [ 140.017583] mmc2: sdhci: Wake-up: 0x00000008 | Clock: 0x0000000f [ 140.024039] mmc2: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000 [ 140.030497] mmc2: sdhci: Int enab: 0x107f4000 | Sig enab: 0x107f4000 [ 140.036972] mmc2: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000502 [ 140.043426] mmc2: sdhci: Caps: 0x07eb0000 | Caps_1: 0x8000b407 [ 140.049867] mmc2: sdhci: Cmd: 0x00002c1a | Max curr: 0x00ffffff [ 140.056314] mmc2: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0xffffffff [ 140.062755] mmc2: sdhci: Resp[2]: 0x328f5903 | Resp[3]: 0x00d00f00 [ 140.069195] mmc2: sdhci: Host ctl2: 0x00000008 [ 140.073640] mmc2: sdhci: ADMA Err: 0x00000007 | ADMA Ptr: 0x7809c108 [ 140.080079] mmc2: sdhci: ============================================ [ 140.086662] mmc2: running CQE recovery Fixes: 18094430 ("mmc: sdhci-esdhc-imx: add ADMA Length Mismatch errata fix") Signed-off-by:
Haibo Chen <haibo.chen@nxp.com> Cc: stable@vger.kernel.org Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Alamy Liu authored
commit d07e9fad upstream. Free up the allocated memory in the case of error return The value of mmc_host->cqe_enabled stays 'false'. Thus, cqhci_disable (mmc_cqe_ops->cqe_disable) won't be called to free the memory. Also, cqhci_disable() seems to be designed to disable and free all resources, not suitable to handle this corner case. Fixes: a4080225 ("mmc: cqhci: support for command queue enabled host") Signed-off-by:
Alamy Liu <alamy.liu@gmail.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Alamy Liu authored
commit 27ec9dc1 upstream. There is not enough space being allocated when DCMD is disabled. CQE_DCMD is not necessary to be enabled when CQE is enabled. (Software could halt CQE to send command) In the case that CQE_DCMD is not enabled, it still needs to allocate space for data transfer. For instance: CQE_DCMD is enabled: 31 slots space (one slot used by DCMD) CQE_DCMD is disabled: 32 slots space Fixes: a4080225 ("mmc: cqhci: support for command queue enabled host") Signed-off-by:
-
Ritesh Harjani authored
commit e5723f95 upstream. In case of CQHCI, mrq->cmd may be NULL for data requests (non DCMD). In such case mmc_should_fail_request is directly dereferencing mrq->cmd while cmd is NULL. Fix this by checking for mrq->cmd pointer. Fixes: 72a5af55 ("mmc: core: Add support for handling CQE requests") Signed-off-by:
Ritesh Harjani <riteshh@codeaurora.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Takeshi Saito authored
commit 5603731a upstream. In R-Car Gen2 or later, the maximum number of transfer blocks are changed from 0xFFFF to 0xFFFFFFFF. Therefore, Block Count Register should use iowrite32(). If another system (U-boot, Hypervisor OS, etc) uses bit[31:16], this value will not be cleared. So, SD/MMC card initialization fails. So, check for the bigger register and use apropriate write. Also, mark the register as extended on Gen2. Signed-off-by:
Takeshi Saito <takeshi.saito.xv@renesas.com> [wsa: use max_blk_count in if(), add Gen2, update commit message] Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: stable@kernel.org Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> [Ulf: Fixed build error] Signed-off-by:
-
Sergei Shtylyov authored
commit 5c27ff5d upstream. I have encountered an interrupt storm during the eMMC chip probing (and the chip finally didn't get detected). It turned out that U-Boot left the DMAC interrupts enabled while the Linux driver didn't use those. The SDHI driver's interrupt handler somehow assumes that, even if an SDIO interrupt didn't happen, it should return IRQ_HANDLED. I think that if none of the enabled interrupts happened and got handled, we should return IRQ_NONE -- that way the kernel IRQ code recoginizes a spurious interrupt and masks it off pretty quickly... Fixes: 7729c7a2 ("mmc: tmio: Provide separate interrupt handlers") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by:
-
Jonathan Neuschäfer authored
commit c9bd505d upstream. When using the mmc_spi driver with a card-detect pin, I noticed that the card was not detected immediately after probe, but only after it was unplugged and plugged back in (and the CD IRQ fired). The call tree looks something like this: mmc_spi_probe mmc_add_host mmc_start_host _mmc_detect_change mmc_schedule_delayed_work(&host->detect, 0) mmc_rescan host->bus_ops->detect(host) mmc_detect _mmc_detect_card_removed host->ops->get_cd(host) mmc_gpio_get_cd -> -ENOSYS (ctx->cd_gpio not set) mmc_gpiod_request_cd ctx->cd_gpio = desc To fix this issue, call mmc_detect_change after the card-detect GPIO/IRQ is registered. Signed-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Ben Gardon authored
[ Upstream commit 94a980c3 ] Fix a call to userspace_mem_region_find to conform to its spec of taking an inclusive, inclusive range. It was previously being called with an inclusive, exclusive range. Also remove a redundant region bounds check in vm_userspace_mem_region_add. Region overlap checking is already performed by the call to userspace_mem_region_find. Tested: Compiled tools/testing/selftests/kvm with -static Ran all resulting test binaries on an Intel Haswell test machine All tests passed Signed-off-by:
Ben Gardon <bgardon@google.com> Reviewed-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Vitaly Kuznetsov authored
[ Upstream commit 619ad846 ] kvm-unit-tests' eventinj "NMI failing on IDT" test results in NMI being delivered to the host (L1) when it's running nested. The problem seems to be: svm_complete_interrupts() raises 'nmi_injected' flag but later we decide to reflect EXIT_NPF to L1. The flag remains pending and we do NMI injection upon entry so it got delivered to L1 instead of L2. It seems that VMX code solves the same issue in prepare_vmcs12(), this was introduced with code refactoring in commit 5f3d5799 ("KVM: nVMX: Rework event injection and recovery"). Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Suravee Suthikulpanit authored
[ Upstream commit bb218fbc ] In case of incomplete IPI with invalid interrupt type, the current SVM driver does not properly emulate the IPI, and fails to boot FreeBSD guests with multiple vcpus when enabling AVIC. Fix this by update APIC ICR high/low registers, which also emulate sending the IPI. Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by:
-
Chaitanya Tata authored
[ Upstream commit 93183bdb ] Recently, DMG frequency bands have been extended till 71GHz, so extend the range check till 20GHz (45-71GHZ), else some channels will be marked as disabled. Signed-off-by:
Chaitanya Tata <Chaitanya.Tata@bluwireless.co.uk> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Mathieu Malaterre authored
[ Upstream commit 7c53eb5d ] During refactor in commit 9e478066 ("mac80211: fix MU-MIMO follow-MAC mode") a new struct 'action' was declared with packed attribute as: struct { struct ieee80211_hdr_3addr hdr; u8 category; u8 action_code; } __packed action; But since struct 'ieee80211_hdr_3addr' is declared with an aligned keyword as: struct ieee80211_hdr { __le16 frame_control; __le16 duration_id; u8 addr1[ETH_ALEN]; u8 addr2[ETH_ALEN]; u8 addr3[ETH_ALEN]; __le16 seq_ctrl; u8 addr4[ETH_ALEN]; } __packed __aligned(2); Solve the ambiguity of placing aligned structure in a packed one by adding the aligned(2) attribute to struct 'action'. This removes the following warning (W=1): net/mac80211/rx.c:234:2: warning: alignment 1 of 'struct <anonymous>' is less than 2 [-Wpacked-not-aligned] Cc: Johannes Berg <johannes.berg@intel.com> Suggested-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
Mathieu Malaterre <malat@debian.org> Signed-off-by:
-
Balaji Pothunoori authored
[ Upstream commit 7ed52853 ] Following call trace is observed while adding TDLS peer entry in driver during TDLS setup. Call Trace: [<c1301476>] dump_stack+0x47/0x61 [<c10537d2>] __warn+0xe2/0x100 [<fa22415f>] ? sta_apply_parameters+0x49f/0x550 [mac80211] [<c1053895>] warn_slowpath_null+0x25/0x30 [<fa22415f>] sta_apply_parameters+0x49f/0x550 [mac80211] [<fa20ad42>] ? sta_info_alloc+0x1c2/0x450 [mac80211] [<fa224623>] ieee80211_add_station+0xe3/0x160 [mac80211] [<c1876fe3>] nl80211_new_station+0x273/0x420 [<c170f6d9>] genl_rcv_msg+0x219/0x3c0 [<c170f4c0>] ? genl_rcv+0x30/0x30 [<c170ee7e>] netlink_rcv_skb+0x8e/0xb0 [<c170f4ac>] genl_rcv+0x1c/0x30 [<c170e8aa>] netlink_unicast+0x13a/0x1d0 [<c170ec18>] netlink_sendmsg+0x2d8/0x390 [<c16c5acd>] sock_sendmsg+0x2d/0x40 [<c16c6369>] ___sys_sendmsg+0x1d9/0x1e0 Fixing this by allowing TDLS setup request only when we have completed association. Signed-off-by:
Balaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by:
-
Thomas Falcon authored
[ Upstream commit e95d22c6 ] The IBM virtual ethernet driver's polling function continues to process frames after rescheduling NAPI, resulting in a warning if it exhausted its budget. Do not restart polling after calling napi_reschedule. Instead let frames be processed in the following instance. Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Maciej Żenczykowski authored
[ Upstream commit 3b707c30 ] __bpf_redirect() and act_mirred checks this boolean to determine whether to prefix an ethernet header. Signed-off-by:
Maciej Żenczykowski <maze@google.com> Acked-by:
-
Zhang Run authored
[ Upstream commit 6eea3527 ] The ax88772_bind() should return error code immediately when the PHY was not reset properly through ax88772a_hw_reset(). Otherwise, The asix_get_phyid() will block when get the PHY Identifier from the PHYSID1 MII registers through asix_mdio_read() due to the PHY isn't ready. Furthermore, it will produce a lot of error message cause system crash.As follows: asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to send software reset: ffffffb9 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable software MII access asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable software MII access asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0000: -71 ... Signed-off-by:
Zhang Run <zhang.run@zte.com.cn> Reviewed-by:
Yang Wei <yang.wei9@zte.com.cn> Tested-by:
Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by:
-
Douglas Anderson authored
[ Upstream commit a3c5e2cd ] The bindings for Qualcomm opp levels changed after being Acked but before landing. Thus the code in the GPU driver that was relying on the old bindings is now broken. Let's change the code to match the new bindings by adjusting the old string 'qcom,level' to the new string 'opp-level'. See the patch ("dt-bindings: opp: Introduce opp-level bindings"). NOTE: we will do additional cleanup to totally remove the string from the code and use the new dev_pm_opp_get_level() but we'll do it in a future patch. This will facilitate getting the important code fix in sooner without having to deal with cross-maintainer dependencies. This patch needs to land before the patch ("arm64: dts: sdm845: Add gpu and gmu device nodes") since if a tree contains the device tree patch but not this one you'll get a crash at bootup. Fixes: 4b565ca5 ("drm/msm: Add A6XX device support") Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
Hannes Reinecke authored
[ Upstream commit 78a61cd4 ] Bit 6 in the ANACAP field is used to indicate that the ANA group ID doesn't change while the namespace is attached to the controller. There is an optimisation in the code to only allocate space for the ANA group header, as the namespace list won't change and hence would not need to be refreshed. However, this optimisation was never carried over to the actual workflow, which always assumes that the buffer is large enough to hold the ANA header _and_ the namespace list. So drop this optimisation and always allocate enough space. Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Sagi Grimberg authored
[ Upstream commit 4c174e63 ] Currently, we have several problems with the timeout handler: 1. If we timeout on the controller establishment flow, we will hang because we don't execute the error recovery (and we shouldn't because the create_ctrl flow needs to fail and cleanup on its own) 2. We might also hang if we get a disconnet on a queue while the controller is already deleting. This racy flow can cause the controller disable/shutdown admin command to hang. We cannot complete a timed out request from the timeout handler without mutual exclusion from the teardown flow (e.g. nvme_rdma_error_recovery_work). So we serialize it in the timeout handler and teardown io and admin queues to guarantee that no one races with us from completing the request. Reported-by:
Jaesoo Lee <jalee@purestorage.com> Reviewed-by:
-
Haiyang Zhang authored
[ Upstream commit 17d91256 ] Changing mtu, channels, or buffer sizes ops call to netvsc_attach(), rndis_set_subchannel(), which always reset the hash key to default value. That will override hash key changed previously. This patch fixes the problem by save the hash key, then restore it when we re- add the netvsc device. Fixes: ff4a4419 ("netvsc: allow get/set of RSS indirection table") Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
Michael Kelley <mikelley@microsoft.com> [sl: fix up subject line] Signed-off-by:
-
