- 06 Nov, 2015 40 commits
-
-
Eric B Munson authored
The cost of faulting in all memory to be locked can be very high when working with large mappings. If only portions of the mapping will be used this can incur a high penalty for locking. For the example of a large file, this is the usage pattern for a large statical language model (probably applies to other statical or graphical models as well). For the security example, any application transacting in data that cannot be swapped out (credit card data, medical records, etc). This patch introduces the ability to request that pages are not pre-faulted, but are placed on the unevictable LRU when they are finally faulted in. The VM_LOCKONFAULT flag will be used together with VM_LOCKED and has no effect when set without VM_LOCKED. Setting the VM_LOCKONFAULT flag for a VMA will cause pages faulted into that VMA to be added to the unevictable LRU when they are faulted or if they are already present, but will not cause any missing pages to be faulted in. Exposing this new lock state means that we cannot overload the meaning of the FOLL_POPULATE flag any longer. Prior to this patch it was used to mean that the VMA for a fault was locked. This means we need the new FOLL_MLOCK flag to communicate the locked state of a VMA. FOLL_POPULATE will now only control if the VMA should be populated and in the case of VM_LOCKONFAULT, it will not be set. Signed-off-by:
Eric B Munson <emunson@akamai.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Eric B Munson authored
With the refactored mlock code, introduce a new system call for mlock. The new call will allow the user to specify what lock states are being added. mlock2 is trivial at the moment, but a follow on patch will add a new mlock state making it useful. Signed-off-by:
Michal Hocko <mhocko@suse.com> Acked-by:
-
Eric B Munson authored
mlock() allows a user to control page out of program memory, but this comes at the cost of faulting in the entire mapping when it is allocated. For large mappings where the entire area is not necessary this is not ideal. Instead of forcing all locked pages to be present when they are allocated, this set creates a middle ground. Pages are marked to be placed on the unevictable LRU (locked) when they are first used, but they are not faulted in by the mlock call. This series introduces a new mlock() system call that takes a flags argument along with the start address and size. This flags argument gives the caller the ability to request memory be locked in the traditional way, or to be locked after the page is faulted in. A new MCL flag is added to mirror the lock on fault behavior from mlock() in mlockall(). There are two main use cases that this set covers. The first is the security focussed mlock case. A buffer is needed that cannot be written to swap. The maximum size is known, but on average the memory used is significantly less than this maximum. With lock on fault, the buffer is guaranteed to never be paged out without consuming the maximum size every time such a buffer is created. The second use case is focussed on performance. Portions of a large file are needed and we want to keep the used portions in memory once accessed. This is the case for large graphical models where the path through the graph is not known until run time. The entire graph is unlikely to be used in a given invocation, but once a node has been used it needs to stay resident for further processing. Given these constraints we have a number of options. We can potentially waste a large amount of memory by mlocking the entire region (this can also cause a significant stall at startup as the entire file is read in). We can mlock every page as we access them without tracking if the page is already resident but this introduces large overhead for each access. The third option is mapping the entire region with PROT_NONE and using a signal handler for SIGSEGV to mprotect(PROT_READ) and mlock() the needed page. Doing this page at a time adds a significant performance penalty. Batching can be used to mitigate this overhead, but in order to safely avoid trying to mprotect pages outside of the mapping, the boundaries of each mapping to be used in this way must be tracked and available to the signal handler. This is precisely what the mm system in the kernel should already be doing. For mlock(MLOCK_ONFAULT) the user is charged against RLIMIT_MEMLOCK as if mlock(MLOCK_LOCKED) or mmap(MAP_LOCKED) was used, so when the VMA is created not when the pages are faulted in. For mlockall(MCL_ONFAULT) the user is charged as if MCL_FUTURE was used. This decision was made to keep the accounting checks out of the page fault path. To illustrate the benefit of this set I wrote a test program that mmaps a 5 GB file filled with random data and then makes 15,000,000 accesses to random addresses in that mapping. The test program was run 20 times for each setup. Results are reported for two program portions, setup and execution. The setup phase is calling mmap and optionally mlock on the entire region. For most experiments this is trivial, but it highlights the cost of faulting in the entire region. Results are averages across the 20 runs in milliseconds. mmap with mlock(MLOCK_LOCKED) on entire range: Setup avg: 8228.666 Processing avg: 8274.257 mmap with mlock(MLOCK_LOCKED) before each access: Setup avg: 0.113 Processing avg: 90993.552 mmap with PROT_NONE and signal handler and batch size of 1 page: With the default value in max_map_count, this gets ENOMEM as I attempt to change the permissions, after upping the sysctl significantly I get: Setup avg: 0.058 Processing avg: 69488.073 mmap with PROT_NONE and signal handler and batch size of 8 pages: Setup avg: 0.068 Processing avg: 38204.116 mmap with PROT_NONE and signal handler and batch size of 16 pages: Setup avg: 0.044 Processing avg: 29671.180 mmap with mlock(MLOCK_ONFAULT) on entire range: Setup avg: 0.189 Processing avg: 17904.899 The signal handler in the batch cases faulted in memory in two steps to avoid having to know the start and end of the faulting mapping. The first step covers the page that caused the fault as we know that it will be possible to lock. The second step speculatively tries to mlock and mprotect the batch size - 1 pages that follow. There may be a clever way to avoid this without having the program track each mapping to be covered by this handeler in a globally accessible structure, but I could not find it. It should be noted that with a large enough batch size this two step fault handler can still cause the program to crash if it reaches far beyond the end of the mapping. These results show that if the developer knows that a majority of the mapping will be used, it is better to try and fault it in at once, otherwise mlock(MLOCK_ONFAULT) is significantly faster. The performance cost of these patches are minimal on the two benchmarks I have tested (stream and kernbench). The following are the average values across 20 runs of stream and 10 runs of kernbench after a warmup run whose results were discarded. Avg throughput in MB/s from stream using 1000000 element arrays Test 4.2-rc1 4.2-rc1+lock-on-fault Copy: 10,566.5 10,421 Scale: 10,685 10,503.5 Add: 12,044.1 11,814.2 Triad: 12,064.8 11,846.3 Kernbench optimal load 4.2-rc1 4.2-rc1+lock-on-fault Elapsed Time 78.453 78.991 User Time 64.2395 65.2355 System Time 9.7335 9.7085 Context Switches 22211.5 22412.1 Sleeps 14965.3 14956.1 This patch (of 6): Extending the mlock system call is very difficult because it currently does not take a flags argument. A later patch in this set will extend mlock to support a middle ground between pages that are locked and faulted in immediately and unlocked pages. To pave the way for the new system call, the code needs some reorganization so that all the actual entry point handles is checking input and translating to VMA flags. Signed-off-by: -
Andrey Ryabinin authored
Currently we already taint the kernel in some cases. E.g. if we hit some bug in slub memory we call object_err() which will taint the kernel with TAINT_BAD_PAGE flag. But for other kind of bugs kernel left untainted. Always taint with TAINT_BAD_PAGE if kasan found some bug. This is useful for automated testing. Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Reviewed-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Andrey Ryabinin authored
It's recommended to have slub's user tracking enabled with CONFIG_KASAN, because: a) User tracking disables slab merging which improves detecting out-of-bounds accesses. b) User tracking metadata acts as redzone which also improves detecting out-of-bounds accesses. c) User tracking provides additional information about object. This information helps to understand bugs. Currently it is not enabled by default. Besides recompiling the kernel with KASAN and reinstalling it, user also have to change the boot cmdline, which is not very handy. Enable slub user tracking by default with KASAN=y, since there is no good reason to not do this. [akpm@linux-foundation.org: little fixes, per David] Signed-off-by: -
Xishi Qiu authored
Use IS_ALIGNED() to determine whether the shadow span two bytes. It generates less code and more readable. Also add some comments in shadow check functions. Signed-off-by:
Xishi Qiu <qiuxishi@huawei.com> Acked-by:
-
Wang Long authored
The current KASAN code can not find the following out-of-bounds bugs: char *ptr; ptr = kmalloc(8, GFP_KERNEL); memset(ptr+7, 0, 2); the cause of the problem is the type conversion error in *memory_is_poisoned_n* function. So this patch fix that. Signed-off-by:Wang Long <long.wanglong@huawei.com> Acked-by:
-
Wang Long authored
Add some out of bounds testcases to test_kasan module. Signed-off-by:
-
Andrey Konovalov authored
Update the reference to the kasan prototype repository on github, since it was renamed. Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Konstantin Serebryany <kcc@google.com> Signed-off-by:
-
Andrey Konovalov authored
Move KASAN_SANITIZE in arch/x86/boot/Makefile above the comment related to SVGA_MODE, since the comment refers to 'the next line'. Signed-off-by:
-
Andrey Konovalov authored
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Andrey Konovalov authored
We decided to use KASAN as the short name of the tool and KernelAddressSanitizer as the full one. Update log messages according to that. Signed-off-by:
-
Andrey Konovalov authored
Makes KASAN accurately determine the type of the bad access. If the shadow byte value is in the [0, KASAN_SHADOW_SCALE_SIZE) range we can look at the next shadow byte to determine the type of the access. Signed-off-by:
-
Andrey Konovalov authored
Update the names of the bad access types to better reflect the type of the access that happended and make these error types "literals" that can be used for classification and deduplication in scripts. Signed-off-by:
-
Andrey Konovalov authored
Each access with address lower than kasan_shadow_to_mem(KASAN_SHADOW_START) is reported as user-memory-access. This is not always true, the accessed address might not be in user space. Fix this by reporting such accesses as null-ptr-derefs or wild-memory-accesses. There's another reason for this change. For userspace ASan we have a bunch of systems that analyze error types for the purpose of classification and deduplication. Sooner of later we will write them to KASAN as well. Then clearly and explicitly stated error types will bring value. Signed-off-by:
-
Aneesh Kumar K.V authored
When we end up calling kasan_report in real mode, our shadow mapping for the spinlock variable will show poisoned. This will result in us calling kasan_report_error with lock_report spin lock held. To prevent this disable kasan reporting when we are priting error w.r.t kasan. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Reviewed-by:
Andrey Ryabinin <ryabinin.a.a@gmail.com> Signed-off-by:
-
Aneesh Kumar K.V authored
We can't use generic functions like print_hex_dump to access kasan shadow region. This require us to setup another kasan shadow region for the address passed (kasan shadow address). Some architectures won't be able to do that. Hence make a copy of the shadow region row and pass that to generic functions. Signed-off-by:
-
Aneesh Kumar K.V authored
Use is_module_address instead Signed-off-by:
-
Aneesh Kumar K.V authored
The function only disable/enable reporting. In the later patch we will be adding a kasan early enable/disable. Rename kasan_enabled to properly reflect its function. Signed-off-by:
-
Tetsuo Handa authored
refresh_cpu_vm_stats(int cpu) is no longer referenced by !SMP kernel since Linux 3.12. Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
-
Hugh Dickins authored
There's an odd line about "Locked" at the head of the description of /proc/meminfo: it seems to have strayed from /proc/PID/smaps, so lead it back there. Move "Swap" and "SwapPss" descriptions down above it, to match the order in the file (though "PageSize"s still undescribed). The example of "Locked: 374 kB" (the same as Pss, neither Rss nor Size) is so unlikely as to be misleading: just make it 0, this is /bin/bash text; which would be "dw" (disabled write) not "de" (do not expand). Signed-off-by:
Hugh Dickins <hughd@google.com> Acked-by:
-
Hugh Dickins authored
LKP reports that v4.2 commit afa2db2f ("tmpfs: truncate prealloc blocks past i_size") causes a 14.5% slowdown in the AIM9 creat-clo benchmark. creat-clo does just what you'd expect from the name, and creat's O_TRUNC on 0-length file does indeed get into more overhead now shmem_setattr() tests "0 <= 0" instead of "0 < 0". I'm not sure how much we care, but I think it would not be too VW-like to add in a check for whether any pages (or swap) are allocated: if none are allocated, there's none to remove from the radix_tree. At first I thought that check would be good enough for the unmaps too, but no: we should not skip the unlikely case of unmapping pages beyond the new EOF, which were COWed from holes which have now been reclaimed, leaving none. This gives me an 8.5% speedup: on Haswell instead of LKP's Westmere, and running a debug config before and after: I hope those account for the lesser speedup. And probably someone has a benchmark where a thousand threads keep on stat'ing the same file repeatedly: forestall that report by adjusting v4.3 commit 44a30220 ("shmem: recalculate file inode when fstat") not to take the spinlock in shmem_getattr() when there's no work to do. Signed-off-by:
Ying Huang <ying.huang@linux.intel.com> Tested-by:
-
David Rientjes authored
/proc/pid/oom_adj exists solely to avoid breaking existing userspace binaries that write to the tunable. Add a comment in the only possible location within the kernel tree to describe the situation and motivation for keeping it around. Signed-off-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
Michal Hocko authored
Commit 424cdc14 ("memcg: convert threshold to bytes") has fixed a regression introduced by 3e32cb2e ("mm: memcontrol: lockless page counters") where thresholds were silently converted to use page units rather than bytes when interpreting the user input. The fix is not complete, though, as properly pointed out by Ben Hutchings during stable backport review. The page count is converted to bytes but unsigned long is used to hold the value which would be obviously not sufficient for 32b systems with more than 4G thresholds. The same applies to usage as taken from mem_cgroup_usage which might overflow. Let's remove this bytes vs. pages internal tracking differences and handle thresholds in page units internally. Chage mem_cgroup_usage() to return the value in page units and revert 424cdc14 because this should be sufficient for the consistent handling. mem_cgroup_read_u64 as the only users of mem_cgroup_usage outside of the threshold handling code is converted to give the proper in bytes result. It is doing that already for page_counter output so this is more consistent as well. The value presented to the userspace is still in bytes units. Fixes: 424cdc14 ("memcg: convert threshold to bytes") Fixes: 3e32cb2e ("mm: memcontrol: lockless page counters") Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Reviewed-by:
Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> From: Michal Hocko <mhocko@kernel.org> Subject: memcg-fix-thresholds-for-32b-architectures-fix Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Johannes Weiner <hannes@cmpxchg.org> From: Andrew Morton <akpm@linux-foundation.org> Subject: memcg-fix-thresholds-for-32b-architectures-fix-fix don't attempt to inline mem_cgroup_usage() The compiler ignores the inline anwyay. And __always_inlining it adds 600 bytes of goop to the .o file. Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by:
-
Johannes Weiner authored
page_counter_try_charge() currently returns 0 on success and -ENOMEM on failure, which is surprising behavior given the function name. Make it follow the expected pattern of try_stuff() functions that return a boolean true to indicate success, or false for failure. Signed-off-by:
-
Johannes Weiner authored
memory.current on the root level doesn't add anything that wouldn't be more accurate and detailed using system statistics. It already doesn't include slabs, and it'll be a pain to keep in sync when further memory types are accounted in the memory controller. Remove it. Note that this applies to the new unified hierarchy interface only. Signed-off-by:
-
Dave Hansen authored
My recent patch "mm, hugetlb: use memory policy when available" added some bloat to hugetlb.o. This patch aims to get some of the bloat back, especially when NUMA is not in play. It does this with an implicit #ifdef and marking some things static that should have been static in my first patch. It also makes the warnings only VM_WARN_ON()s. They were responsible for a pretty big chunk of the bloat. Doing this gets our NUMA=n text size back to a wee bit _below_ where we started before the original patch. It also shaves a bit of space off the NUMA=y case, but not much. Enforcing the mempolicy definitely takes some text and it's hard to avoid. size(1) output: text data bss dec hex filename 30745 3433 2492 36670 8f3e hugetlb.o.nonuma.baseline 31305 3755 2492 37552 92b0 hugetlb.o.nonuma.patch1 30713 3433 2492 36638 8f1e hugetlb.o.nonuma.patch2 (this patch) 25235 473 41276 66984 105a8 hugetlb.o.numa.baseline 25715 475 41276 67466 1078a hugetlb.o.numa.patch1 25491 473 41276 67240 106a8 hugetlb.o.numa.patch2 (this patch) Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
-
Dave Hansen authored
I have a hugetlbfs user which is never explicitly allocating huge pages with 'nr_hugepages'. They only set 'nr_overcommit_hugepages' and then let the pages be allocated from the buddy allocator at fault time. This works, but they noticed that mbind() was not doing them any good and the pages were being allocated without respect for the policy they specified. The code in question is this: > struct page *alloc_huge_page(struct vm_area_struct *vma, ... > page = dequeue_huge_page_vma(h, vma, addr, avoid_reserve, gbl_chg); > if (!page) { > page = alloc_buddy_huge_page(h, NUMA_NO_NODE); dequeue_huge_page_vma() is smart and will respect the VMA's memory policy. But, it only grabs _existing_ huge pages from the huge page pool. If the pool is empty, we fall back to alloc_buddy_huge_page() which obviously can't do anything with the VMA's policy because it isn't even passed the VMA. Almost everybody preallocates huge pages. That's probably why nobody has ever noticed this. Looking back at the git history, I don't think this _ever_ worked from when alloc_buddy_huge_page() was introduced in 7893d1d5, 8 years ago. The fix is to pass vma/addr down in to the places where we actually call in to the buddy allocator. It's fairly straightforward plumbing. This has been lightly tested. Signed-off-by: -
Alexander Kuleshov authored
There are no users of the node_hstates array outside of the mm/hugetlb.c. So let's make it static. Signed-off-by:
Alexander Kuleshov <kuleshovmail@gmail.com> Signed-off-by:
-
Rasmus Villemoes authored
As far as I can tell, strncpy_from_unsafe never returns -EFAULT. ret is the result of a __copy_from_user_inatomic(), which is 0 for success and positive (in this case necessarily 1) for access error - it is never negative. So we were always returning the length of the, possibly truncated, destination string. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by:
Alexei Starovoitov <ast@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by:
-
Andrew Morton authored
mm/cma.c: In function 'cma_alloc': mm/cma.c:366: warning: 'pfn' may be used uninitialized in this function The patch actually improves the tracing a bit: if alloc_contig_range() fails, tracing will display the offending pfn rather than -1. Cc: Stefan Strogin <stefan.strogin@gmail.com> Cc: Michal Nazarewicz <mpn@google.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Hugh Dickins authored
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties since v2.6.16 first introduced page migration; and the set_page_dirty() which completed its migration of PageDirty, later had to be moderated to __set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too. No actual problems seen with this procedure recently, but if you look into what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually achieving, it turns out to be nothing more than moving the PageDirty flag, and its NR_FILE_DIRTY stat from one zone to another. It would be good to avoid a pile of irrelevant decrementations and incrementations, and improper event counting, and unnecessary descent of the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which radix_tree_replace_slot() left in place anyway). Do the NR_FILE_DIRTY movement, like the other stats movements, while interrupts still disabled in migrate_page_move_mapping(); and don't even bother if the zone is the same. Do the PageDirty movement there under tree_lock too, where old page is frozen and newpage not yet visible: bearing in mind that as soon as newpage becomes visible in radix_tree, an un-page-locked set_page_dirty() might interfere (or perhaps that's just not possible: anything doing so should already hold an additional reference to the old page, preventing its migration; but play safe). But we do still need to transfer PageDirty in migrate_page_copy(), for those who don't go the mapping route through migrate_page_move_mapping(). Signed-off-by:
-
Hugh Dickins authored
We have had trouble in the past from the way in which page migration's newpage is initialized in dribs and drabs - see commit 8bdd6380 ("mm: fix direct reclaim writeback regression") which proposed a cleanup. We have no actual problem now, but I think the procedure would be clearer (and alternative get_new_page pools safer to implement) if we assert that newpage is not touched until we are sure that it's going to be used - except for taking the trylock on it in __unmap_and_move(). So shift the early initializations from move_to_new_page() into migrate_page_move_mapping(), mapping and NULL-mapping paths. Similarly migrate_huge_page_move_mapping(), but its NULL-mapping path can just be deleted: you cannot reach hugetlbfs_migrate_page() with a NULL mapping. Adjust stages 3 to 8 in the Documentation file accordingly. Signed-off-by:
-
Hugh Dickins authored
Hitherto page migration has avoided using a migration entry for a swapcache page mapped into userspace, apparently for historical reasons. So any page blessed with swapcache would entail a minor fault when it's next touched, which page migration otherwise tries to avoid. Swapcache in an mlocked area is rare, so won't often matter, but still better fixed. Just rearrange the block in try_to_unmap_one(), to handle TTU_MIGRATION before checking PageAnon, that's all (apart from some reindenting). Well, no, that's not quite all: doesn't this by the way fix a soft_dirty bug, that page migration of a file page was forgetting to transfer the soft_dirty bit? Probably not a serious bug: if I understand correctly, soft_dirty afficionados usually have to handle file pages separately anyway; but we publish the bit in /proc/<pid>/pagemap on file mappings as well as anonymous, so page migration ought not to perturb it. Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Hugh Dickins authored
__unmap_and_move() contains a long stale comment on page_get_anon_vma() and PageSwapCache(), with an odd control flow that's hard to follow. Mostly this reflects our confusion about the lifetime of an anon_vma, in the early days of page migration, before we could take a reference to one. Nowadays this seems quite straightforward: cut it all down to essentials. I cannot see the relevance of swapcache here at all, so don't treat it any differently: I believe the old comment reflects in part our anon_vma confusions, and in part the original v2.6.16 page migration technique, which used actual swap to migrate anon instead of swap-like migration entries. Why should a swapcache page not be migrated with the aid of migration entry ptes like everything else? So lose that comment now, and enable migration entries for swapcache in the next patch. Signed-off-by:
-
Hugh Dickins authored
Clean up page migration a little more by calling remove_migration_ptes() from the same level, on success or on failure, from __unmap_and_move() or from unmap_and_move_huge_page(). Don't reset page->mapping of a PageAnon old page in move_to_new_page(), leave that to when the page is freed. Except for here in page migration, it has been an invariant that a PageAnon (bit set in page->mapping) page stays PageAnon until it is freed, and I think we're safer to keep to that. And with the above rearrangement, it's necessary because zap_pte_range() wants to identify whether a migration entry represents a file or an anon page, to update the appropriate rss stats without waiting on it. Signed-off-by:
-
Hugh Dickins authored
Clean up page migration a little by moving the trylock of newpage from move_to_new_page() into __unmap_and_move(), where the old page has been locked. Adjust unmap_and_move_huge_page() and balloon_page_migrate() accordingly. But make one kind-of-functional change on the way: whereas trylock of newpage used to BUG() if it failed, now simply return -EAGAIN if so. Cutting out BUG()s is good, right? But, to be honest, this is really to extend the usefulness of the custom put_new_page feature, allowing a pool of new pages to be shared perhaps with racing uses. Use an "else" instead of that "skip_unmap" label. Signed-off-by:
Rafael Aquini <aquini@redhat.com> Signed-off-by:
-
Hugh Dickins authored
I don't know of any problem from the way it's used in our current tree, but there is one defect in page migration's custom put_new_page feature. An unused newpage is expected to be released with the put_new_page(), but there was one MIGRATEPAGE_SUCCESS (0) path which released it with putback_lru_page(): which can be very wrong for a custom pool. Fixed more easily by resetting put_new_page once it won't be needed, than by adding a further flag to modify the rc test. Signed-off-by:
-
Hugh Dickins authored
It's migrate.c not migration,c, and nowadays putback_movable_pages() not putback_lru_pages(). Signed-off-by:
-
Hugh Dickins authored
After v4.3's commit 0610c25d ("memcg: fix dirty page migration") mem_cgroup_migrate() doesn't have much to offer in page migration: convert migrate_misplaced_transhuge_page() to set_page_memcg() instead. Then rename mem_cgroup_migrate() to mem_cgroup_replace_page(), since its remaining callers are replace_page_cache_page() and shmem_replace_page(): both of whom passed lrucare true, so just eliminate that argument. Signed-off-by:
-
