- 12 Jun, 2019 9 commits
-
-
Tomasz Figa authored
I tend to review most of the vb2 patches anyway and we need some active reviewers, so let add me to the MAINTAINERS file as such. Signed-off-by: Tomasz Figa <tfiga@chromium.org> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
Instead of filling in the struct v4l2_capability device_caps field, fill in the struct video_device device_caps field. That way the V4L2 core knows what the capabilities of the video device are. But this only really works if all drivers use this, so convert this touchscreen driver accordingly. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Florian Echtler <floe@butterbrot.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Philipp Zabel authored
Dynamically allocate clocks and move clock names out of struct hantro_variant. This lifts the four clock limit and allows to use ARRAY_SIZE() to fill .num_clocks to reduce the risk of mismatches. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Philipp Zabel authored
On i.MX8MQ/MM a separate control block contains registers for per-core resets, clock gating, and fuse register control. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Philipp Zabel authored
Add support for multiple register ranges with SoC specific names. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Philipp Zabel authored
The i.MX8MQ bindings will use different IRQ names ("g1" instead of "vdpu", and "g2"), so make them configurable. This also allows to register more than two IRQs, which will be required for i.MX8MM support later (it will add "h1" instead of "vepu"). Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Philipp Zabel authored
It seems that on i.MX8MQ the power domain controller does not propagate resets to the VPU cores on resume. Add a callback to allow implementing manual reset of the VPU cores after ungating the power domain. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Philipp Zabel authored
It can be helpful to know which video device was registered at which device node. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Philipp Zabel authored
Rename the driver and all relevant identifiers from Rockchip to Hantro, as other Hantro IP based VPU implementations can be supported by the same driver. The RK3288 decoder is Hantro G1 based, the encoder is Hantro H1. This patch just renames, no functional changes. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
- 11 Jun, 2019 17 commits
-
-
Kieran Bingham authored
New Gen3 R-Car platforms incorporate the FDP1 with an updated version register. No code change is required to support these targets, but they will currently report an error stating that the device can not be identified. Update the driver to match against the new device types. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Wolfram Sang authored
We have a dedicated pointer for that, so use it. Much easier to read and less computation involved. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Oliver Neukum authored
We need to check whether this work we are canceling actually is initialized. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+2e1ef9188251d9cc7944@syzkaller.appspotmail.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Torleiv Sundre authored
uvcvideo creates a debugfs directory based on the device bus number and device number. If a device contains more than one uvc function, the creation of the second and following debugfs directories will fail and print an info message like this: "uvcvideo: Unable to create debugfs 3-2 directory." This patch includes the uvc streaming interface number in the debugfs directory name, to make sure it is unique. The directory name format is changed from "<busnum>-<devnum>" to "<busnum>-<devnum>-<intfnum>" Signed-off-by: Torleiv Sundre <torleiv@huddly.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Mauro Carvalho Chehab authored
There are some conflicts due to SPDX changes. We also have more patches being merged via media tree touching them. So, let's merge back from upstream and address those. Linux 5.2-rc4 * tag 'v5.2-rc4': (767 commits) Linux 5.2-rc4 MAINTAINERS: Karthikeyan Ramasubramanian is MIA i2c: xiic: Add max_read_len quirk lockref: Limit number of cmpxchg loop retries uaccess: add noop untagged_addr definition x86/insn-eval: Fix use-after-free access to LDT entry kbuild: use more portable 'command -v' for cc-cross-prefix s390/unwind: correct stack switching during unwind block, bfq: add weight symlink to the bfq.weight cgroup parameter cgroup: let a symlink too be created with a cftype file drm/nouveau/secboot/gp10[2467]: support newer FW to fix SEC2 failures on some boards drm/nouveau/secboot: enable loading of versioned LS PMU/SEC2 ACR msgqueue FW drm/nouveau/secboot: split out FW version-specific LS function pointers drm/nouveau/secboot: pass max supported FW version to LS load funcs drm/nouveau/core: support versioned firmware loading drm/nouveau/core: pass subdev into nvkm_firmware_get, rather than device block: free sched's request pool in blk_cleanup_queue pktgen: do not sleep with the thread lock held. net: mvpp2: Use strscpy to handle stat strings net: rds: fix memory leak in rds_ib_flush_mr_pool ... Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
Correctly handle stopping and restarting the encoder, keeping track of the stop and drain states. In addition it adds correct handling of corner cases, allowing v4l2-compliance to pass. Unfortunately, the code is getting to be quite complicated, so we need to work on better codec support in v4l2-mem2mem.c to simplify drivers. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
Return an error when attempting to subscribe to those events for a stateless codec. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
After a resolution change is detected, q_data->sizeimage is updated to the new format, but buf_prepare is still draining buffers that need to use the old pre-resolution-change value. So store the sizeimage value in q_data->vb2_sizeimage in queue_setup and use that in buf_prepare. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
Set V4L2_BUF_FLAG_P/KEYFRAME after decoding a frame. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
The stateful encoder requires the presence of this control. Since a single buffer is sufficient for vicodec, we just set this control to 1. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
Setting the encoder output format to e.g. 1920x1080 will set the crop rectangle to 1920x1088, the coded resolution to 1920x1088 and the capture coded resolution and sizeimage to 1920x1088 as well. Note that this might change, since the encoder spec is still in flux with respect to how this should behave. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
The initial sizeimage value was wrong for the stateless decoder. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
Rather than returning width/height values of 0, just default to a format. Formats in V4L2 are always supposed to be valid, there is no concept of an invalid format. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
v4l2_ctrl_request_complete can sleep, so can't be called while a spinlock is held. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Maxime Jourdan authored
Add an entry for the meson video decoder for amlogic SoCs. Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Maxime Jourdan authored
Amlogic SoCs feature a powerful video decoder unit able to decode many formats, with a performance of usually up to 4k60. This is a driver for this IP that is based around the v4l2 m2m framework. It features decoding for: - MPEG 1 - MPEG 2 Supported SoCs are: GXBB (S905), GXL (S905X/W/D), GXM (S912) There is also a hardware bitstream parser (ESPARSER) that is handled here. Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Maxime Jourdan authored
Add documentation for the meson vdec dts node. Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
- 10 Jun, 2019 5 commits
-
-
Sean Young authored
The IR protocol can now only be set via the rc protocols sysfs file rather than via module parameters or a custom procfs file. So, it is no longer necessary to periodically check for protocol changes. The IR_RCMM protocol does not decode the Philips RC-MM protocol (12, 24 or 32 bit variants) or any protocol rc-core can encode, so this is marked RC_PROTO_UNKNOWN. Tested on Technotrend/Hauppauge WinTV Nexus-S rev2.1, which comes with a small black hauppauge remote. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Tobias Klausmann authored
Move common code into a new function. This provides the needed functionality to use dvb_module_probe() instead of dvb_attach()! [mchehab+samsung@kernel.org: fix an out of order error return code] Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Tobias Klausmann authored
Refactor out the common parts of stv6110x_probe() and stv6110x_attach() into separate functions. This provides the needed functionality to use dvb_module_probe() instead of dvb_attach()! Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Fabio Estevam authored
Commit 020bc735 ("media: staging/imx: Allow driver to build if COMPILE_TEST is enabled") incorrectly assumed that the imx media driver had no build time dependency with IMX_IPUV3_CORE. Building on x86_64 without IMX_IPUV3_CORE causes lots of build errors such as: All these definitions come from the imx ipu3 core driver, so make sure that imx media depends on IMX_IPUV3_CORE. This reverts commit 020bc735. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Boris Brezillon authored
CAP_M2M_MPLANE means the device supports _MPLANE formats for both capture and output. Adjust the check to avoid EINVAL errors on such devices. Reported-by: Maxime Jourdan <mjourdan@baylibre.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
- 09 Jun, 2019 1 commit
-
-
Linus Torvalds authored
-
- 08 Jun, 2019 8 commits
-
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fixes from Ilya Dryomov: "A change to call iput() asynchronously to avoid a possible deadlock when iput_final() needs to wait for in-flight I/O (e.g. readahead) and a fixup for a cleanup that went into -rc1" * tag 'ceph-for-5.2-rc4' of git://github.com/ceph/ceph-client: ceph: fix error handling in ceph_get_caps() ceph: avoid iput_final() while holding mutex or in dispatch thread ceph: single workqueue for inode related works
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fix from Juergen Gross: "Just one fix for the Xen block frontend driver avoiding allocations with order > 0" * tag 'for-linus-5.2b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-blkfront: switch kcalloc to kvcalloc for large array allocation
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Heiko Carstens: - fix stack unwinder: the stack unwinder rework has on off-by-one bug which prevents following stack backchains over more than one context (e.g. irq -> process). - fix address space detection in exception handler: if user space switches to access register mode, which is not supported anymore, the exception handler may resolve to the wrong address space. * tag 's390-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/unwind: correct stack switching during unwind s390/mm: fix address space detection in exception handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Paul Burton: - Declare ginvt() __always_inline due to its use of an argument as an inline asm immediate. - A VDSO build fix following Kbuild changes made this cycle. - A fix for boot failures on txx9 systems following memory initialization changes made this cycle. - Bounds check virt_addr_valid() to prevent it spuriously indicating that bogus addresses are valid, in turn fixing hardened usercopy failures that have been present since v4.12. - Build uImage.gz for pistachio systems by default, since this is the image we need in order to actually boot on a board. - Remove an unused variable in our uprobes code. * tag 'mips_fixes_5.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: uprobes: remove set but not used variable 'epc' MIPS: pistachio: Build uImage.gz by default MIPS: Make virt_addr_valid() return bool MIPS: Bounds check virt_addr_valid MIPS: TXx9: Fix boot crash in free_initmem() MIPS: remove a space after -I to cope with header search paths for VDSO MIPS: mark ginvt() as __always_inline
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull yet more SPDX updates from Greg KH: "Another round of SPDX header file fixes for 5.2-rc4 These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being added, based on the text in the files. We are slowly chipping away at the 700+ different ways people tried to write the license text. All of these were reviewed on the spdx mailing list by a number of different people. We now have over 60% of the kernel files covered with SPDX tags: $ ./scripts/spdxcheck.py -v 2>&1 | grep Files Files checked: 64533 Files with SPDX: 40392 Files with errors: 0 I think the majority of the "easy" fixups are now done, it's now the start of the longer-tail of crazy variants to wade through" * tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 5.2-rc4 to resolve a number of reported issues. The most "notable" one here is the kernel headers in proc^Wsysfs fixes. Those changes move the header file info into sysfs and fixes the build issues that you reported. Other than that, a bunch of small habanalabs driver fixes, some fpga driver fixes, and a few other tiny driver fixes. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: habanalabs: Read upper bits of trace buffer from RWPHI habanalabs: Fix virtual address access via debugfs for 2MB pages fpga: zynqmp-fpga: Correctly handle error pointer habanalabs: fix bug in checking huge page optimization habanalabs: Avoid using a non-initialized MMU cache mutex habanalabs: fix debugfs code uapi/habanalabs: add opcode for enable/disable device debug mode habanalabs: halt debug engines on user process close test_firmware: Use correct snprintf() limit genwqe: Prevent an integer overflow in the ioctl parport: Fix mem leak in parport_register_dev_model fpga: dfl: expand minor range when registering chrdev region fpga: dfl: Add lockdep classes for pdata->lock fpga: dfl: afu: Pass the correct device to dma_mapping_error() fpga: stratix10-soc: fix use-after-free on s10_init() w1: ds2408: Fix typo after 49695ac4 (reset on output_write retry with readback) kheaders: Do not regenerate archive if config is not changed kheaders: Move from proc to sysfs lkdtm/bugs: Adjust recursion test to avoid elision lkdtm/usercopy: Moves the KERNEL_DS test to non-canonical
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "I2C has a driver bugfix and a MAINTAINERS fix" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: Karthikeyan Ramasubramanian is MIA i2c: xiic: Add max_read_len quirk
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine fixes from Vinod Koul: - jz4780 transfer fix for acking descriptors early - fsl-qdma: clean registers on error - dw-axi-dmac: null pointer dereference fix - mediatek-cqdma: fix sleeping in atomic context - tegra210-adma: fix bunch os issues like crashing in driver probe, channel FIFO configuration etc. - sprd: Fixes for possible crash on descriptor status, block length overflow. For 2-stage transfer fix incorrect start, configuration and interrupt handling. * tag 'dmaengine-fix-5.2-rc4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: sprd: Add interrupt support for 2-stage transfer dmaengine: sprd: Fix the right place to configure 2-stage transfer dmaengine: sprd: Fix block length overflow dmaengine: sprd: Fix the incorrect start for 2-stage destination channels dmaengine: sprd: Add validation of current descriptor in irq handler dmaengine: sprd: Fix the possible crash when getting descriptor status dmaengine: tegra210-adma: Fix spelling dmaengine: tegra210-adma: Fix channel FIFO configuration dmaengine: tegra210-adma: Fix crash during probe dmaengine: mediatek-cqdma: sleeping in atomic context dmaengine: dw-axi-dmac: fix null dereference when pointer first is null dmaengine: fsl-qdma: Add improvement dmaengine: jz4780: Fix transfers being ACKed too soon
-