- 17 Mar, 2022 15 commits
-
-
Ping-Ke Shih authored
These function is used to stop transmitting when we are going to switch channels or do some RF calibration. Before these operations, we need to stop channel transmission and backup setting into parameter tx_en. After operations are done, resume transmitting by backup parameter tx_en. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220317055543.40514-13-pkshih@realtek.com
-
Ping-Ke Shih authored
In order to support 8852C that uses 32 bits to control TX types. This patch doesn't really use 32 bits tx_en yet, but next patch will use it. Signed-off-by:
-
Ping-Ke Shih authored
Use if() style would be clear than "? :", because the else cases are always 0. The read val from rtw89_mac_read_lte() isn't used, so remove this statement. Signed-off-by:
-
Chia-Yuan Li authored
The BT-coexistence uses these function to control antenna and TDMA, so implement the variant type to support all chips. Signed-off-by:
Chia-Yuan Li <leo.li@realtek.com> Signed-off-by:
-
Chia-Yuan Li authored
Initialize FW status and disabled H2C function if CPU disabled. Then, it can reset to initial state. Signed-off-by:
-
Ping-Ke Shih authored
8852C add new hardware feature -- preload window, which is used to load more data to D-MAC, so it can possibly yield better performance. This patch is to configure preload and reserved size for next window. Signed-off-by:
-
Chia-Yuan Li authored
Modify functions that control D-MAC (data MAC) and LDO to support variant chips. Signed-off-by:
-
Ping-Ke Shih authored
The format of RF parameter is changed; it doesn't encode delay parameters into table, but the delay coding becomes regular pair of register address and value. To help firmware to recover RF register settings, we need to download these parameters to firmware. For v1 format, only download partial parameters (ignore them with addr < 0x100). Signed-off-by:
-
Chung-Hsuan Hung authored
Using encoded address which BIT(16) is used to discriminate which region is going to access. Illustrate the calling flow as below rtw89_phy_write_rf_v1() -+-> rtw89_phy_write_rf() // old interface +-> rtw89_phy_write_rf_a() // new interface Signed-off-by:Chung-Hsuan Hung <hsuan8331@realtek.com> Signed-off-by:
-
Yuan-Han Zhang authored
Configure this TX power to indicate TX power offset that uses to transmit TB (trigger base) uplink frames. Also, shrink the unit of TX power offset changes to suitable type s8. Signed-off-by:
Yuan-Han Zhang <yuanhan1020@realtek.com> Signed-off-by:
-
Yuan-Han Zhang authored
The CFO tracking algorithm is the same, but control methods are different. Set parameters via xtal serial interfaces (SI). Signed-off-by:
-
Yuan-Han Zhang authored
The dcfo_comp is digital CFO (central frequency offset) compensation. Since the flow can be shared with all chips, add chip parameters to support variant register address and format. Signed-off-by:
-
Colin Ian King authored
There are some spelling mistakes in some literal strings. Fix them. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Acked-by:
-
Colin Ian King authored
There are some spelling mistakes in comments and brcmf_dbg messages. Fix these. Signed-off-by:
-
Arnd Bergmann authored
Building iwlmei without CONFIG_CFG80211 causes a link-time warning: ld.lld: error: undefined symbol: ieee80211_hdrlen >>> referenced by net.c >>> net/wireless/intel/iwlwifi/mei/net.o:(iwl_mei_tx_copy_to_csme) in archive drivers/built-in.a Add an explicit dependency to avoid this. In theory it should not be needed here, but it also seems pointless to allow IWLMEI for configurations without CFG80211. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Emmanuel Grumbach <Emmanuel.grumbach@intel.com> Acked-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
- 16 Mar, 2022 7 commits
-
-
Ping-Ke Shih authored
smatch reports that: fw.c:1997 rtw89_append_probe_req_ie() error: uninitialized symbol 'ret'. This can be a issue only if no band is supported by the chip, but it is impossible. So, it is still safe without this patch. Signed-off-by:
-
Lukas Bulwahn authored
Commit dae0978d ("dt: bindings: net: add qcom,ath11k.yaml") obviously adds qcom,ath11k.yaml, but the file entry in MAINTAINERS, added with commit fcda1cb8 ("MAINTAINERS: add DT bindings files for ath10k and ath11k") then refers to qcom,ath11k.txt. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. Repair this file reference in QUALCOMM ATHEROS ATH11K WIRELESS DRIVER, and put it in alphabetic order while at it. Fixes: fcda1cb8 ("MAINTAINERS: add DT bindings files for ath10k and ath11k") Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
-
Julia Lawall authored
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by:
-
Julia Lawall authored
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by:
-
Jonathan Teh authored
This is an RTL8188CUS device, identifies as model N150MA-199WWS. Signed-off-by:
Jonathan Teh <jonathan.teh@outlook.com> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Julia Lawall authored
Use kzalloc instead of kmalloc + memset. The semantic patch that makes this change is: (https://coccinelle.gitlabpages.inria.fr/website/) //<smpl> @@ expression res, size, flag; @@ - res = kmalloc(size, flag); + res = kzalloc(size, flag); ... - memset(res, 0, size); //</smpl> Signed-off-by:
-
Colin Ian King authored
Don't populate the read-only array wmm_oui on the stack but instead make it static const. Also makes the object code a little smaller. Signed-off-by:
-
- 15 Mar, 2022 4 commits
-
-
Lorenzo Bianconi authored
Update bssid_indicator in ieee80211_bss_conf according to the number of bssid in the set. Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/f92317e002fca9933f05a445fcefb4f53291d601.1645702516.git.lorenzo@kernel.orgSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
John Crispin authored
Trigger ieee80211_csa_finish() on the non-transmitting interfaces when channel switch concludes on the transmitting interface. Co-developed-by:
Aloka Dixit <alokad@codeaurora.org> Signed-off-by:
John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/6fde4d7f9fa387494f46a7aa4a584478dcda06f1.1645702516.git.lorenzo@kernel.orgSigned-off-by:
-
Lorenzo Bianconi authored
Add new fields in struct beacon_data to store all MBSSID elements. Generate a beacon template which includes all MBSSID elements. Move CSA offset to reflect the MBSSID element length. Co-developed-by:
Money Wang <money.wang@mediatek.com> Link: https://lore.kernel.org/r/5322db3c303f431adaf191ab31c45e151dde5465.1645702516.git.lorenzo@kernel.org [small cleanups] Signed-off-by:
-
Johannes Berg authored
When CONFIG_PM isn't defined we don't have the function ieee80211_sta_restart() compiled in, but we always need it now for firmware restart. Move it out of the ifdef. Fixes: 7d352ccf ("mac80211: Add support to trigger sta disconnect on hardware restart") Link: https://lore.kernel.org/r/20220312221957.1fa96c72db51.I8ecaa5f9402fede0272161e0531ab930b97fba3e@changeidSigned-off-by:
-
- 13 Mar, 2022 14 commits
-
-
David S. Miller authored
Merge tag 'linux-can-next-for-5.18-20220313' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next linux-can-next-for-5.18-20220313 Marc Kleine-Budde says: ==================== pull-request: can-next 2022-03-13 this is a pull request of 13 patches for net-next/master. The 1st patch is by me and fixes the freeing of a skb in the vxcan driver (initially added in this net-next window). The remaining 12 patches are also by me and target the mcp251xfd driver. The first patch fixes a printf modifier (initially added in this net-next window). The remaining patches add ethtool based ring and RX/TX IRQ coalescing support to the driver. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marc Kleine-Budde authored
This patch increases the number of RX-FIFOs to 3 and the max TX-FIFO depth to 16. This leads to the following default ring configuration. CAN-2.0 mode: | FIFO setup: TEF: 0x400: 8*12 bytes = 96 bytes | FIFO setup: RX-0: FIFO 1/0x460: 32*20 bytes = 640 bytes | FIFO setup: RX-1: FIFO 2/0x6e0: 32*20 bytes = 640 bytes | FIFO setup: RX-2: FIFO 3/0x960: 16*20 bytes = 320 bytes | FIFO setup: TX: FIFO 4/0xaa0: 8*16 bytes = 128 bytes | FIFO setup: free: 224 bytes CAN-FD mode: | FIFO setup: TEF: 0x400: 4*12 bytes = 48 bytes | FIFO setup: RX-0: FIFO 1/0x430: 16*76 bytes = 1216 bytes | FIFO setup: RX-1: FIFO 2/0x8f0: 4*76 bytes = 304 bytes | FIFO setup: TX: FIFO 3/0xa20: 4*72 bytes = 288 bytes | FIFO setup: free: 192 bytes With the previously added ethtool ring configuration support the RAM on the chip can now be runtime configured between RX and TX buffers. Link: https://lore.kernel.org/20220313083640.501791-13-mkl@pengutronix.deSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Marc Kleine-Budde authored
This patch adds support ethtool based configuration for the TX IRQ coalescing added in the previous patch. Link: https://lore.kernel.org/20220313083640.501791-12-mkl@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
This patch adds TX IRQ coalescing support to the driver. The implemented algorithm is similar to the RX IRQ coalescing support added in the previous patch. Link: https://lore.kernel.org/20220313083640.501791-11-mkl@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
This patch adds support ethtool based configuration for the RX IRQ coalescing added in the previous patch. Link: https://lore.kernel.org/20220313083640.501791-10-mkl@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
This patch adds RX IRQ coalescing support to the driver. The mcp251xfd chip doesn't support proper hardware based coalescing, so this patch tries to implemented it in software. The RX-FIFO offers a "FIFO not empty" interrupt, which is used if no coalescing is active. With activated RX IRQ coalescing the "FIFO not empty" interrupt is disabled in the RX IRQ handler and the "FIFO half full" or "FIFO full interrupt" (depending on RX max coalesced frames IRQ) is used instead. To avoid RX CAN frame starvation a hrtimer is setup with RX coalesce usecs IRQ,on timer expiration the "FIFO not empty" is enabled again. Support for ethtool configuration is added in the next patch. Link: https://lore.kernel.org/20220313083640.501791-9-mkl@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
This patch adds runtime configurable RX and TX ring parameters via ethtool to the driver. Link: https://lore.kernel.org/20220313083640.501791-8-mkl@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
So far the configuration of the hardware FIFOs is hard coded and depend only on the selected CAN mode (CAN-2.0 or CAN-FD). This patch updates the macros describing the ring, FIFO and RAM layout to prepare for the next patches that add support for runtime configurable ring parameters via ethtool. Link: https://lore.kernel.org/20220313083640.501791-7-mkl@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
This patch prepares the driver for runtime configurable RX and TX ring parameters. The actual runtime config support will be added in the next patch. Link: https://lore.kernel.org/20220313083640.501791-6-mkl@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
This patch adds basic ethtool support (to query the current and maximum ring parameters) to the driver. Link: https://lore.kernel.org/20220313083640.501791-5-mkl@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
This patch adds support for coalescing to the RAM layout calculation. Link: https://lore.kernel.org/20220313083640.501791-4-mkl@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
This patch adds a helper function to calculate the ring configuration of the controller based on various constraints, like available RAM, size of RX and TX objects, CAN-mode, number of FIFOs and FIFO depth. Link: https://lore.kernel.org/20220313083640.501791-3-mkl@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
In case of an erroneous ring configuration more RAM than available might be used. Change the printf modifier to a signed int to properly print this erroneous value. Fixes: 83daa863 ("can: mcp251xfd: ring: update FIFO setup debug info") Link: https://lore.kernel.org/20220313083640.501791-2-mkl@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
This patch fixes the freeing of the "oskb", by using kfree_skb() instead of kfree(). Fixes: 1574481b ("vxcan: remove sk reference in peer skb") Link: https://lore.kernel.org/all/20220311123741.382618-1-mkl@pengutronix.de Cc: Oliver Hartkopp <socketcan@hartkopp.net> Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
