- 25 Jun, 2006 40 commits
-
-
Patrick Boettcher authored
V4L/DVB (4028): Change dvb_frontend_ops to be a real field instead of a pointer field inside dvb_frontend The dvb_frontend_ops is a pointer inside dvb_frontend. That's why every demod-driver is having a field of dvb_frontend_ops in its private-state-struct and using the reference for filling the pointer-field in dvb_frontend. - It saves at least two lines of code per demod-driver, - reduces object size (one less dereference per frontend_ops-access), - be coherent with dvb_tuner_ops, - makes it a little bit easier for newbies to understand how it works and - avoids stupid mistakes because you would have to copy the dvb_frontend_ops always, before you could assign the static pointer directly, which was dangerous. Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Patrick Boettcher authored
Some of the dvb_tuner_ops-pointer were set before having a dvb_frontend creating. Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Ricardo Cerqueira authored
Added support for a new cx88 card, including it's remote Signed-off-by:
Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Andrew de Quincey authored
I had broken the mt352 tuning when a non-directly connected PLL was used - uncommon, but this is what is used on the pinnacle card. Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by:
-
Patrick Boettcher authored
Minor code cleanup on the genpix-module. Signed-off-by:
-
Alan Nisota authored
This is a patch which includes support for the GENPIX 8PSK->USB module. The board supports QPSK, BPSK and 8PSK decoding (though I don't think it will be DVB-S2 compliant) With the following patch, the boad is equivalent to a budget card (no CA Module) The patch which adds 8psk suppot will follow, but is seperate, as it requires DVB-S2 support More info on the board can be found at www.genpix-electronics.com (and they host the requisite firmwares there as well) Signed off by: Alan Nisota <alannisota@gmail.com> Signed-off-by:
-
Ricardo Cerqueira authored
This functionality was used when remote control input for BTTV was handled by a standalone module, to hook some functions of that module into the main bttv core. Since that module is now extinct, this can go away Signed-off-by:
Ricardo Cerqueira <rmcc@linuxtv.org> Signed-off-by:
-
Sylvain Pasche authored
This adds support for the older (?) Pinnacle PCTV remotes (with all buttons colored in grey). There's no autodetection for the type of remote, though; saa7134 defaults to the colored one, to use the grey remote the "pinnacle_remote=1" option must be passed to the saa7134 module Signed-off-by:
Sylvain Pasche <sylvain.pasche@gmail.com> Signed-off-by:
-
jayakumar.video@gmail.com authored
Adds a usbvideo driver for the Logitech Quickcam Messenger USB webcam. Signed-off-by:
Jaya Kumar <jayakumar.video@gmail.com> Signed-off-by:
-
Angelo Marconi authored
- Add support for ProLink Pixelview Playtv@P7000 Raw video and MPEG encoded video confirmed to work properly. SVideo, Composite and FM inputs are untested - disabled for now. Signed-off-by:
Angelo Marconi <am@massalombarda.net> Signed-off-by:
-
Trent Piepho authored
Some code had pointless gotos that just didn't make any sense. They didn't make the code smaller, or faster, or easier to understand. Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
-
Per Dalén authored
This patch changes the sweeprate for TT C1500 using QAM64. It has been proven to work using QAM64 at a SRate of 6875 for the two Signed-off-by: -
Andrew de Quincey authored
Rework diseqc support to be more in line with the other demod drivers. Fix Nova-S-Plus/Nova-SE2 diseqc. Cleanup API. Signed-off-by:
-
Andrew de Quincey authored
The calls to set the pll ops were in the wrong place - moved them. Signed-off-by:
-
Hans Verkuil authored
The soft reset (de)assert commands where not at the right place. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
Stop/start microcontroller when changing sampling frequency to prevent tinny audio. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
Scott Alfter <salfter@ssai.us> Signed-off-by:
-
Trent Piepho authored
The actual offset of the start of VBI data is incorrectly documented for both the cx2388x and bt8x8. For the cx2388x, it appears to be about 220 to 224 + VBI_V_DEL*2. The driver has been incorrectly reporting an offset of 244. This patch adjusts VBI_V_DEL to 10, so that the offset of 244 is correct. This is the same offset as the bttv driver, and expected by some software. Signed-off-by:
-
Michael Schimek authored
VBI (Closed Caption, CC) capturing never worked in NTSC mode with the cx88 driver. They were tested with libzvbi and a patched version of tvtime. Signed-off-by:
Michael H. Schimek <mschimek@gmx.at> Signed-off-by:
-
Christoph Pfister authored
Signed-off-by:
Christoph Pfister <christophpfister@bluemail.ch> Signed-off-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
Michael Krufky authored
Added autodetection for PCI subsystem id 1822:0019 to use the card definition for CX88_BOARD_DNTV_LIVE_DVB_T_PRO Signed-off-by:
-
Christoph Pfister authored
Signed-off-by:
-
Andrew de Quincey authored
These cards need special handling for CI - reinitialising the frontend device when the CI module is reset. Additionally the tda10021 needs to be set into a different transport stream mode when a CI module is present. Signed-off-by:
-
Michael Krufky authored
Since the filename of the cx23416 encoder firmware image is defined in cx2341x.h, we don't need to explicitly define it in cx88-blackbird.c anymore. This changeset removes BLACKBIRD_FIRM_ENC_FILENAME, replacing all occurrances with CX2341X_FIRM_ENC_FILENAME. Signed-off-by:
-
Valentin Zagura authored
Added code to cx88-blackbird.c to treat the VIDIOC_S_FREQUENCY ioctl to stop mpeg stream before changing the frequency and restart it after. It seems that the mpeg stream needs to be paused while changing the channel frequency, otherwise the mpeg encoder enters into a bad state, producing artifacts. Signed-off-by:
Valentin Zagura <puthre@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
This patch fix a difference between v4l/dvb tree and kernel tree. Signed-off-by: -
Michael Krufky authored
cx88-blackbird uses the same encoder firmware for the cx23416 chip that is used by ivtv and pvrusb2. This patch alters the driver to expect the cx23416 encoder firmware to be located in the file, "v4l-cx2341x-enc.fw", instead of using "blackbird-fw-enc.bin" Signed-off-by:
-
Michael Krufky authored
This patch removes all of the BLACKBIRD_API #define's, instead using the equivalent CX2341X_ENC #define's in cx2341x.h Signed-off-by:
-
Mauro Carvalho Chehab authored
moved from if to ifndef. Also added such tests at gentree script. Gentree updated to its latest version. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
akpm@osdl.org authored
drivers/media/video/pwc/pwc-dec23.c: In function `pwc_dec23_decompress': drivers/media/video/pwc/pwc-dec23.c:885: warning: null argument where non-null required (arg 2) Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Christian Praehauser authored
Fix some problems regarding support for Unidirectional Lightweight Encapsulation (ULE) in dvbnet.c. The original ULE code was based on a draft. In the meantime, ULE has been published in RFC 4326 (ftp://ftp.rfc-editor.org/in-notes/rfc4326.txt). With these fixes, and some additions (which are included in the patch), the decaps code should now be complient to RFC4326. Signed-off-by:
Christian Praehauser <cpraehaus@cosy.sbg.ac.at> Signed-off-by:
-
Adrian Bunk authored
This patch contains the following possible cleanups: - make the following needlessly global functions static: - em28xx-core.c: em28xx_accumulator_set() - em28xx-core.c: em28xx_capture_area_set() - em28xx-core.c: em28xx_scaler_set() - em28xx-core.c: em28xx_isocIrq() - remove the following unused EXPORT_SYMBOL's: - em28xx-cards.c: em28xx_boards - em28xx-cards.c: em28xx_bcount - em28xx-cards.c: em28xx_id_table Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Andrew de Quincey authored
I'd missed some of these out, breaking the av7110 tuning. I then checked for more and added them in where necessary. They may not actually be necessary in all these locations, but if not, they'll simply have no effect. Add small delay to stv0299 pll gate control to fix tuning problems. Signed-off-by:
-
Mauro Carvalho Chehab authored
Date: There are several drivers now using those cx2341x registers. This patch creates a separate header for those registers. Signed-off-by: -
Mauro Carvalho Chehab authored
Date: From: Mauro Carvalho Chehab <mchehab@infradead.org> There are some docs at V4L/DVB tree that were never included at kernel. This patch includes those docs. Signed-off-by:
-
