Don't know why to do the loop iteration here. It looks unneeded.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dave Jones <davej@redhat.com>

We have various bootloaders for Exynos4210 machines. Some of they
set the ARM core frequency at boot time even when the boot is a resume
from suspend-to-RAM. Such changes may create inconsistency in the
data of CPUFREQ driver and have incurred hang issues with suspend-to-RAM.

This patch enables to save and restore CPU frequencies with pm-notifier and
sets the frequency at the initial (boot-time) value so that there wouldn't
be any inconsistency between bootloader and kernel. This patch does not
use CPUFREQ's suspend/resume callbacks because they are syscore-ops, which
do not allow to use mutex that is being used by regulators that are used by
the target function.

This also prevents any CPUFREQ transitions during suspend-resume context,
which could be dangerous at noirq-context along with regulator framework.
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Jones <davej@redhat.com>

The same clock is used for all cpus so we must notify the frequency change
for each one in order to update the configuration of all twd clockevents.

change since V1:
* use policy->cpus instead of cpu_online_mask
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Dave Jones <davej@redhat.com>

Add new module option "set_max_voltage".
One of the lessons learned from Adaptive Powersaver is that voltage values
returned by processor are for worst case scenario. But required voltage
is changing with CPU temperature. And even processors produced in the same
batch can have different minimum voltage necessary for stable work at
specified frequency.
On Elonex Webbook, once system starts, temperature never drops below
48 deg. C. Loading module after systems start allows user to lower CPU
voltage and still have stable system.
Sadly C7 doesn't allow code to set frequency or voltage from outside limits.
If you ask it to set voltage lower then minimum it will ignore you. Thats
why it isn't possible to change minimum voltage for minimum frequency too.
Changing maximum voltage on Elonex Webbook leads to very good results. Looks
like VIA C7 1.6GHz 1084mV can safetly run at 892mV. This means 83% of
orginal value. If same percentage applies to power generated it means 12.5W
in the place of 15W. Not much, but it is better then nothing.
Only C7-M makes it possible.
If voltage is too low by 16mV or more you will experience kernel panic.
If voltage is too low by 32mV or more you will experience system freeze.
Signed-off-by: Rafał Bilski <rafalbilski@interia.pl>
Signed-off-by: Dave Jones <davej@redhat.com>

Call ACPI function to get BIOS limit for CPU frequency.
Fail if processor would like to run at higher frequency.
Allow user to ignore BIOS limit.

eps: Detected VIA Model D C7-M
eps: Current voltage = 1084mV
eps: Current multiplier = 16
eps: Highest voltage = 1084mV
eps: Highest multiplier = 16
eps: Lowest voltage = 844mV
eps: Lowest multiplier = 4
eps: ACPI limit 1.60GHz
Signed-off-by: Rafał Bilski <rafalbilski@interia.pl>
Signed-off-by: Dave Jones <davej@redhat.com>

Some systems are using 1,2Ghz@844mV processors running at 600MHz@796mV.
Try to detect such systems and don't touch anything on it. If CPU doesn't have
P-States in BIOS it should run at maximum frequency.
Allow user to bypass checks by means of two new options.
Don't set frequency to maximum on module unloading to avoid bada boom.
It is also possible that some processors may have incorrect values in min/max
registers caused by error in manufacturing process. Probably it would be BIOS
job to set them to right frequency and P-States tables would have correct
values inside.
Two additional sanity checks for voltage.
Signed-off-by: Rafał Bilski <rafalbilski@interia.pl>
Signed-off-by: Dave Jones <davej@redhat.com>

This patch enables 'scaling_available_frequencies' attribute
showing list of available frequencies.
Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: KyungMin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Jones <davej@redhat.com>

* 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
  tools, slub: Fix off-by-one buffer corruption after readlink() call
  slub: Discard slab page when node partial > minimum partial number
  slub: correct comments error for per cpu partial
  mm: restrict access to slab files under procfs and sysfs
  slub: Code optimization in get_partial_node()
  slub: doc: update the slabinfo.c file path
  slub: explicitly document position of inserting slab to partial list
  slub: update slabinfo tools to report per cpu partial list statistics
  slub: per cpu cache for partial pages
  slub: return object pointer from get_partial() / new_slab().
  slub: pass kmem_cache_cpu pointer to get_partial()
  slub: Prepare inuse field in new_slab()
  slub: Remove useless statements in __slab_alloc
  slub: free slabs without holding locks
  slub: use print_hex_dump
  slab: use print_hex_dump

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: irq: remove IRQF_DISABLED
  Blackfin: boards: clean up i2c_board_info
  Blackfin: drop unused Kconfig symbol
  Blackfin: bf537-stamp: register ASoC EVAL-ADAU1373 board driver
  Blackfin: bf537-stamp: Register adav801 codec and ASoC machine driver
  Blackfin: bf537-stamp: register adau1701 codec and asoc machine driver
  Blackfin: merge asm/mutex.h into kbuild too
  Blackfin: bf537-stamp: fix ad73311 codec config macro
  Blackfin: bf537-stamp: fix ad1836 name
  Blackfin: kgdb_test: rework code to avoid -O0 usage
  Blackfin: fix sparse warnings in copy_to/from_user
  Blackfin: bf548-ezkit: update defconfig
  Blackfin: SMP: fix scheduling deadlock
  Blackfin: H8606: fixup bogus ioresource init
  Blackfin: SMP: convert to common asm-generic/atomic.h

* 'for-linus' of git://neil.brown.name/md: (34 commits)
  md: Fix some bugs in recovery_disabled handling.
  md/raid5: fix bug that could result in reads from a failed device.
  lib/raid6: Fix filename emitted in generated code
  md.c: trivial comment fix
  MD: Allow restarting an interrupted incremental recovery.
  md: clear In_sync bit on devices added to an active array.
  md: add proper write-congestion reporting to RAID1 and RAID10.
  md: rename "mdk_personality" to "md_personality"
  md/bitmap remove fault injection options.
  md/raid5: typedef removal: raid5_conf_t -> struct r5conf
  md/raid1: typedef removal: conf_t -> struct r1conf
  md/raid10: typedef removal: conf_t -> struct r10conf
  md/raid0: typedef removal: raid0_conf_t -> struct r0conf
  md/multipath: typedef removal: multipath_conf_t -> struct mpconf
  md/linear: typedef removal: linear_conf_t -> struct linear_conf
  md/faulty: remove typedef: conf_t -> struct faulty_conf
  md/linear: remove typedefs: dev_info_t -> struct dev_info
  md: remove typedefs: mirror_info_t -> struct mirror_info
  md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio
  md: remove typedefs: mdk_thread_t -> struct md_thread
  ...

* 'for-linus' of git://git.open-osd.org/linux-open-osd: (21 commits)
  ore: Enable RAID5 mounts
  exofs: Support for RAID5 read-4-write interface.
  ore: RAID5 Write
  ore: RAID5 read
  fs/Makefile: Always inspect exofs/
  ore: Make ore_calc_stripe_info EXPORT_SYMBOL
  ore/exofs: Change ore_check_io API
  ore/exofs: Define new ore_verify_layout
  ore: Support for partial component table
  ore: Support for short read/writes
  exofs: Support for short read/writes
  ore: Remove check for ios->kern_buff in _prepare_for_striping to later
  ore: cleanup: Embed an ore_striping_info inside ore_io_state
  ore: Only IO one group at a time (API change)
  ore/exofs: Change the type of the devices array (API change)
  ore: Make ore_striping_info and ore_calc_stripe_info public
  exofs: Remove unused data_map member from exofs_sb_info
  exofs: Rename struct ore_components comps => oc
  exofs/super.c: local functions should be static
  exofs/ore.c: local functions should be static
  ...

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86-64, unistd: Remove bogus __IGNORE_getcpu
  x86, mm, trivial: Remove unnecessary get_order() in free_thread_info()
  x86, cleanup: Remove unneeded version.h include from arch/x86/

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86-64: Fix CFI data for interrupt frames
  x86-64: Don't apply destructive erratum workaround on unaffected CPUs

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/irq: Standardize on CONFIG_SPARSE_IRQ=y
  x86, ioapic: Clean up ioapic/apic_id usage
  x86, ioapic: Factor out print_IO_APIC() to only print one io apic
  x86, ioapic: Print out irte with right ioapic index
  x86, ioapic: Split up setup_ioapic_entry()
  x86, ioapic: Pass struct irq_attr * to setup_ioapic_irq()
  apic, i386/bigsmp: Fix false warnings regarding logical APIC ID mismatches

Mark Einon points out that the Kconfig option for NETDEV_1000 no longer
exists, and the merge of the staging drivers should have removed that
for the et131x driver.

And while checking for it, I noticed that slicoss had the same stale
dependency.  Remove that one too.
Reported-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  time, s390: Get rid of compile warning
  dw_apb_timer: constify clocksource name
  time: Cleanup old CONFIG_GENERIC_TIME references that snuck in
  time: Change jiffies_to_clock_t() argument type to unsigned long
  alarmtimers: Fix error handling
  clocksource: Make watchdog reset lockless
  posix-cpu-timers: Cure SMP accounting oddities
  s390: Use direct ktime path for s390 clockevent device
  clockevents: Add direct ktime programming function
  clockevents: Make minimum delay adjustments configurable
  nohz: Remove "Switched to NOHz mode" debugging messages
  proc: Consider NO_HZ when printing idle and iowait times
  nohz: Make idle/iowait counter update conditional
  nohz: Fix update_ts_time_stat idle accounting
  cputime: Clean up cputime_to_usecs and usecs_to_cputime macros
  alarmtimers: Rework RTC device selection using class interface
  alarmtimers: Add try_to_cancel functionality
  alarmtimers: Add more refined alarm state tracking
  alarmtimers: Remove period from alarm structure
  alarmtimers: Remove interval cap limit hack
  ...

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
  llist: Add back llist_add_batch() and llist_del_first() prototypes
  sched: Don't use tasklist_lock for debug prints
  sched: Warn on rt throttling
  sched: Unify the ->cpus_allowed mask copy
  sched: Wrap scheduler p->cpus_allowed access
  sched: Request for idle balance during nohz idle load balance
  sched: Use resched IPI to kick off the nohz idle balance
  sched: Fix idle_cpu()
  llist: Remove cpu_relax() usage in cmpxchg loops
  sched: Convert to struct llist
  llist: Add llist_next()
  irq_work: Use llist in the struct irq_work logic
  llist: Return whether list is empty before adding in llist_add()
  llist: Move cpu_relax() to after the cmpxchg()
  llist: Remove the platform-dependent NMI checks
  llist: Make some llist functions inline
  sched, tracing: Show PREEMPT_ACTIVE state in trace_sched_switch
  sched: Remove redundant test in check_preempt_tick()
  sched: Add documentation for bandwidth control
  sched: Return unused runtime on group dequeue
  ...

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Fix insn decoder for longer instruction

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (121 commits)
  perf symbols: Increase symbol KSYM_NAME_LEN size
  perf hists browser: Refuse 'a' hotkey on non symbolic views
  perf ui browser: Use libslang to read keys
  perf tools: Fix tracing info recording
  perf hists browser: Elide DSO column when it is set to just one DSO, ditto for threads
  perf hists: Don't consider filtered entries when calculating column widths
  perf hists: Don't decay total_period for filtered entries
  perf hists browser: Honour symbol_conf.show_{nr_samples,total_period}
  perf hists browser: Do not exit on tab key with single event
  perf annotate browser: Don't change selection line when returning from callq
  perf tools: handle endianness of feature bitmap
  perf tools: Add prelink suggestion to dso update message
  perf script: Fix unknown feature comment
  perf hists browser: Apply the dso and thread filters when merging new batches
  perf hists: Move the dso and thread filters from hist_browser
  perf ui browser: Honour the xterm colors
  perf top tui: Give color hints just on the percentage, like on --stdio
  perf ui browser: Make the colors configurable and change the defaults
  perf tui: Remove unneeded call to newtCls on startup
  perf hists: Don't format the percentage on hist_entry__snprintf
  ...

Fix up conflicts in arch/x86/kernel/kprobes.c manually.

Ingo's tree did the insane "add volatile to const array", which just
doesn't make sense ("volatile const"?).  But we could remove the const
*and* make the array volatile to make doubly sure that gcc doesn't
optimize it away..

Also fix up kernel/trace/ring_buffer.c non-data-conflicts manually: the
reader_lock has been turned into a raw lock by the core locking merge,
and there was a new user of it introduced in this perf core merge.  Make
sure that new use also uses the raw accessor functions.

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Add IRQF_RESUME_EARLY and resume such IRQs earlier
  genirq: Fix fatfinered fixup really
  genirq: percpu: allow interrupt type to be set at enable time
  genirq: Add support for per-cpu dev_id interrupts
  genirq: Add IRQCHIP_SKIP_SET_WAKE flag

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
  rcu: Move propagation of ->completed from rcu_start_gp() to rcu_report_qs_rsp()
  rcu: Remove rcu_needs_cpu_flush() to avoid false quiescent states
  rcu: Wire up RCU_BOOST_PRIO for rcutree
  rcu: Make rcu_torture_boost() exit loops at end of test
  rcu: Make rcu_torture_fqs() exit loops at end of test
  rcu: Permit rt_mutex_unlock() with irqs disabled
  rcu: Avoid having just-onlined CPU resched itself when RCU is idle
  rcu: Suppress NMI backtraces when stall ends before dump
  rcu: Prohibit grace periods during early boot
  rcu: Simplify unboosting checks
  rcu: Prevent early boot set_need_resched() from __rcu_pending()
  rcu: Dump local stack if cannot dump all CPUs' stacks
  rcu: Move __rcu_read_unlock()'s barrier() within if-statement
  rcu: Improve rcu_assign_pointer() and RCU_INIT_POINTER() documentation
  rcu: Make rcu_assign_pointer() unconditionally insert a memory barrier
  rcu: Make rcu_implicit_dynticks_qs() locals be correct size
  rcu: Eliminate in_irq() checks in rcu_enter_nohz()
  nohz: Remove nohz_cpu_mask
  rcu: Document interpretation of RCU-lockdep splats
  rcu: Allow rcutorture's stat_interval parameter to be changed at runtime
  ...

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
  rtmutex: Add missing rcu_read_unlock() in debug_rt_mutex_print_deadlock()
  lockdep: Comment all warnings
  lib: atomic64: Change the type of local lock to raw_spinlock_t
  locking, lib/atomic64: Annotate atomic64_lock::lock as raw
  locking, x86, iommu: Annotate qi->q_lock as raw
  locking, x86, iommu: Annotate irq_2_ir_lock as raw
  locking, x86, iommu: Annotate iommu->register_lock as raw
  locking, dma, ipu: Annotate bank_lock as raw
  locking, ARM: Annotate low level hw locks as raw
  locking, drivers/dca: Annotate dca_lock as raw
  locking, powerpc: Annotate uic->lock as raw
  locking, x86: mce: Annotate cmci_discover_lock as raw
  locking, ACPI: Annotate c3_lock as raw
  locking, oprofile: Annotate oprofilefs lock as raw
  locking, video: Annotate vga console lock as raw
  locking, latencytop: Annotate latency_lock as raw
  locking, timer_stats: Annotate table_lock as raw
  locking, rwsem: Annotate inner lock as raw
  locking, semaphores: Annotate inner lock as raw
  locking, sched: Annotate thread_group_cputimer as raw
  ...

Fix up conflicts in kernel/posix-cpu-timers.c manually: making
cputimer->cputime a raw lock conflicted with the ABBA fix in commit
bcd5cff7 ("cputimer: Cure lock inversion").

* 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, ioapic: Consolidate the explicit EOI code
  x86, ioapic: Restore the mask bit correctly in eoi_ioapic_irq()
  x86, kdump, ioapic: Reset remote-IRR in clear_IO_APIC
  iommu: Rename the DMAR and INTR_REMAP config options
  x86, ioapic: Define irq_remap_modify_chip_defaults()
  x86, msi, intr-remap: Use the ioapic set affinity routine
  iommu: Cleanup ifdefs in detect_intel_iommu()
  iommu: No need to set dmar_disabled in check_zero_address()
  iommu: Move IOMMU specific code to intel-iommu.c
  intr_remap: Call dmar_dev_scope_init() explicitly
  x86, x2apic: Enable the bios request for x2apic optout

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  caif: Fix BUG() with network namespaces
  net: make bonding slaves honour master's skb->priority
  net: Unlock sock before calling sk_free()

* 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1519 commits)
  staging: et131x: Remove redundant check and return statement
  staging: et131x: Mainly whitespace changes to appease checkpatch
  staging: et131x: Remove last of the forward declarations
  staging: et131x: Remove even more forward declarations
  staging: et131x: Remove yet more forward declarations
  staging: et131x: Remove more forward declarations
  staging: et131x: Remove forward declaration of et131x_adapter_setup
  staging: et131x: Remove some forward declarations
  staging: et131x: Remove unused rx_ring.recv_packet_pool
  staging: et131x: Remove call to find pci pm capability
  staging: et131x: Remove redundant et131x_reset_recv() call
  staging: et131x: Remove unused rx_ring.recv_buffer_pool
  Staging: bcm: Fix three initialization errors in InterfaceDld.c
  Staging: bcm: Fix coding style issues in InterfaceDld.c
  staging:iio:dac: Add AD5360 driver
  staging:iio:trigger:bfin-timer: Fix compile error
  Staging: vt6655: add some range checks before memcpy()
  Staging: vt6655: whitespace fixes to iotcl.c
  Staging: vt6656: add some range checks before memcpy()
  Staging: vt6656: whitespace cleanups in ioctl.c
  ...

Fix up conflicts in:
 - drivers/{Kconfig,Makefile}, drivers/staging/{Kconfig,Makefile}:
	vg driver movement
 - drivers/staging/brcm80211/brcmfmac/{dhd_linux.c,mac80211_if.c}:
	driver removal vs now stale changes
 - drivers/staging/rtl8192e/r8192E_core.c:
	driver removal vs now stale changes
 - drivers/staging/et131x/et131*:
	driver consolidation into one file, tried to do fixups

* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
  TTY: serial_core: Fix crash if DCD drop during suspend
  tty/serial: atmel_serial: bootconsole removed from auto-enumerates
  Revert "TTY: call tty_driver_lookup_tty unconditionally"
  tty/serial: atmel_serial: add device tree support
  tty/serial: atmel_serial: auto-enumerate ports
  tty/serial: atmel_serial: whitespace and braces modifications
  tty/serial: atmel_serial: change platform_data variable name
  tty/serial: RS485 bindings for device tree
  TTY: call tty_driver_lookup_tty unconditionally
  TTY: pty, release tty in all ptmx_open fail paths
  TTY: make tty_add_file non-failing
  TTY: drop driver reference in tty_open fail path
  8250_pci: Fix kernel panic when pch_uart is disabled
  h8300: drivers/serial/Kconfig was moved
  parport_pc: release IO region properly if unsupported ITE887x card is found
  tty: Support compat_ioctl get/set termios_locked
  hvc_console: display printk messages on console.
  TTY: snyclinkmp: forever loop in tx_load_dma_buffer()
  tty/n_gsm: avoid fifo overflow in gsm_dlci_data_output
  tty/n_gsm: fix a bug in gsm_dlci_data_output (adaption = 2 case)
  ...

Fix up Conflicts in:
 - drivers/tty/serial/8250_pci.c
	Trivial conflict with removed duplicate device ID
 - drivers/tty/serial/atmel_serial.c
	Annoying silly conflict between "specify the port num via
	platform_data" and other changes to atmel_console_init

Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (26 commits)
  hwmon: (w83627ehf) Better fix for negative temperature values
  hwmon: (w83627ehf) Uninline is_word_sized
  hwmon: (lm75) Document why clones are not detected
  hwmon: (w83627ehf) Move fan pins check to a separate function
  hwmon: (w83627ehf) Skip reading unused voltage registers
  hwmon: (lm75) Add support for Analog Devices ADT75
  hwmon: (pmbus_core) Simplify sign extensions
  hwmon: (pmbus) Add support for Lineage Power DC-DC converters
  hwmon: (pmbus/ltc2978) Add support for LTC3880 to LTC2978 driver
  hwmon: (pmbus/ltc2978) Explicit driver for LTC2978
  hwmon: (pmbus) Add support for TEMP2 peak attributes
  hwmon: AD7314 driver (ported from IIO)
  hwmon: (pmbus) Add support for Intersil power management chips
  hwmon: (pmbus) Always call _pmbus_read_byte in core driver
  hwmon: (pmbus) Replace EINVAL return codes with more appropriate errors
  hwmon: (pmbus) Provide more documentation
  hwmon/f71882fg: Make the decision wether to register fan attr. per fan
  hwmon/f71882fg: Add a f71882fg_create_fan_sysfs_files helper function
  hwmon/f71882fg: Make all fan/pwm attr tables 2 dimensional
  hwmon: (exynos4_tmu) Remove IRQF_DISABLED
  ...

* git://github.com/rustyrussell/linux:
  params: make dashes and underscores in parameter names truly equal
  kmod: prevent kmod_loop_msg overflow in __request_module()

* 'for-linus' of git://github.com/ericvh/linux:
  9p: fix 9p.txt to advertise msize instead of maxdata
  net/9p: Convert net/9p protocol dumps to tracepoints
  fs/9p: change an int to unsigned int
  fs/9p: Cleanup option parsing in 9p
  9p: move dereference after NULL check
  fs/9p: inode file operation is properly initialized init_special_inode
  fs/9p: Update zero-copy implementation in 9p

This flag is a NOOP and can be removed now.
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Acked-by: Bob Liu <lliubbo@kernel.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

The user may use "foo-bar" for a kernel parameter defined as "foo_bar".
Make sure it works the other way around too.

Apply the equality of dashes and underscores on early_params and __setup
params as well.

The example given in Documentation/kernel-parameters.txt indicates that
this is the intended behaviour.

With the patch the kernel accepts "log-buf-len=1M" as expected.
https://bugzilla.redhat.com/show_bug.cgi?id=744545Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (neatened implementations)

Due to post-increment in condition of kmod_loop_msg in __request_module(),
the system log can be spammed by much more than 5 instances of the 'runaway
loop' message if the number of events triggering it makes the kmod_loop_msg
to overflow.

Fix that by making sure we never increment it past the threshold.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
CC: stable@kernel.org

In 3.0 we changed the way recovery_disabled was handle so that instead
of testing against zero, we test an mddev-> value against a conf->
value.
Two problems:
  1/ one place in raid1 was missed and still sets to '1'.
  2/ We didn't explicitly set the conf-> value at array creation
     time.
     It defaulted to '0' just like the mddev value does so they
     could appear equal and thus disable recovery.
     This did not affect normal 'md' as it calls bind_rdev_to_array
     which changes the mddev value.  However the dmraid interface
     doesn't call this and so doesn't change ->recovery_disabled; so at
     array start all recovery is incorrectly disabled.

So initialise the 'conf' value to one less that the mddev value, so
the will only be the same when explicitly set that way.
Reported-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown  <neilb@suse.de>

Remove i2c_board_info for driver that doesn't exist anymore.
Delete irq_flags for drivers that don't use them anymore.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

There is already an entry in the spi device table for the codec, but the
modalias was wrong.  Also the config symbol name for the codec is wrong,
so this is fixed as well.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

This header was being rewritten while the asm-generic kbuild support
was in flight, so it missed out on the update.  Punt the stub and use
the kbuild now that everything has settled.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>