- 18 May, 2012 1 commit
-
-
Ezequiel García authored
When the device is physically unplugged but there are still open file handles, resource release is defered until last opened handle is closed. This patch fixes a missing em28xx_fh struct release. Tested by compilation only. Signed-off-by:
Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
- 15 May, 2012 39 commits
-
-
Masahiro Nakai authored
It has been indicated on Atmark Techno Web page http://armadillo.atmark-techno.com/faq/a800eva-dont-work-cameraSigned-off-by:
Masahiro Nakai <nakai@atmark-techno.com> Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Kuninori Morimoto authored
CAMCR::DTIF feild controls camera bus as upper8bit/16bit/lower8bit. This patch manages unmanaged lower 8bit bus Signed-off-by:
-
Guennadi Liakhovetski authored
VIDIOC_TRY_FMT shouldn't fail if the user requests an unsupported pixel format. Instead the driver should replace it with a supported one. Fix the sh_mobile_ceu_camera driver accordingly. Signed-off-by:
-
Guennadi Liakhovetski authored
The recently introduced .enum_mbus_fsizes() v4l2-subdev video operation is a duplicate of the .enum_framesizes() operation, introduced earlier. Switch soc-camera over to using the original one. Signed-off-by:
-
Guennadi Liakhovetski authored
In mx2_camera_try_fmt(), when applying i.MX25 restrictions to frame sizes, the height is checked to be <= 0xffff. But later an integer multiplication height * 4 * 0x3ffff is performed, which will overflow even for bounded height values. This patch switches to using 64-bit multiplication and division to avoid overflowing. Signed-off-by:
-
Laurent Pinchart authored
In image mode, the CEU allows configurable line strides up to 8188 pixels. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> [g.liakhovetski@gmx.de: unify sh_mobile_ceu_set_rect() in data-fetch mode] Signed-off-by:
-
Laurent Pinchart authored
Add a capabilities field to the soc_camera_host structure to flag hosts that support user-configurable line strides. soc_camera_try_fmt() then passes the user-provided bytesperline and sizeimage format fields to such hosts, and expects the host to check (and fix if needed) the values. Signed-off-by:
-
Laurent Pinchart authored
Use the new soc_mbus_image_size() function to compute the image size. Signed-off-by:
-
Laurent Pinchart authored
Compute the bytesperline and sizeimage values when trying/setting formats or when allocating buffers by taking the user-requested values into account. Signed-off-by:
-
Laurent Pinchart authored
The function returns the minimum size of an image for a given number of bytes per line (as per the V4L2 specification), width and format. Signed-off-by:
-
Laurent Pinchart authored
The V4L2 specification defines bytesperline for planar formats as the number of bytes per line for the largest plane. Modify soc_mbus_bytes_per_line() accordingly. Signed-off-by:
-
Laurent Pinchart authored
To compute the value of the v4l2_pix_format::bytesperline field, we need information about planes layout for planar formats. The new enum soc_mbus_layout conveys that information. Signed-off-by:
-
Laurent Pinchart authored
Instead of computing the line sizes, use the previously negotiated soc_camera_device::bytesperline value. Signed-off-by:
-
Laurent Pinchart authored
Instead of computing the buffer size manually in the videobuf queue setup and buffer prepare callbacks, use the previously negotiated soc_camera_device::sizeimage value. Signed-off-by:
-
Laurent Pinchart authored
The try_fmt() handler restricts the image width based on the hardware limits and updates the bytesperline value, but doesn't update sizeimage. Fix it. Signed-off-by:
-
Guennadi Liakhovetski authored
Fix a trivial alignment calculation issue. Signed-off-by:
-
Sakari Ailus authored
Remove smiapp-debug.h and let people use CONFIG_DYNAMIC_DEBUG instead. The option only affected to when debug information was being printed. Signed-off-by:
Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> Signed-off-by:
-
Jim Cromie authored
Signed-off-by:
Jim Cromie <jim.cromie@gmail.com> Signed-off-by:
-
Sylwester Nawrocki authored
This patch fixes following compilation warning: Error: no ID for constraint linkend: v4l2-jpeg-chroma-subsampling. and adds missing JPEG control class at the Table A.58. Signed-off-by:
Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by:
-
Antti Palosaari authored
Clean-up dvb_usb_device_properties and fix errors reported by checkpatch.pl. Some other very minor changes. Functionality remains untouched. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Mauro Carvalho Chehab authored
The usage of ../*.h breaks out-of-tree compilation and likely breaks compilation when O= argument is used. Instead of doing that, just add the include path via Makefile. Signed-off-by: -
Javier Martin authored
Remove MX2_CAMERA_SWAP16 and MX2_CAMERA_PACK_DIR_MSB flags so that the driver can negotiate with the attached sensor whether the mbus format needs convertion from UYUV to YUYV or not. Signed-off-by:
Javier Martin <javier.martin@vista-silicon.com> Signed-off-by:
-
Javier Martin authored
Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
Javier Martin authored
According to p.14 fig 3-3 of the datasheet (SLES098A) this decoder transmits data in UYVY format. Signed-off-by:
-
Alexey Khoroshilov authored
The patch replaces Dib*Lock macros with direct calls to mutex functions as soon as they just make the driver code harder to review (per request of Mauro). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Antti Palosaari authored
DVB USB core refuses to load driver when current USB ID does not match IDs on driver table. Due to that dynamic IDs does not work. Replace reference design ID by dynamic ID in .probe() in order to get it working. Signed-off-by:
-
Antti Palosaari authored
Firmware for the PCTV QuatroStick nano (520e). Signed-off-by:
-
Santosh Nayak authored
In 'dib0700_i2c_xfer_new()' and 'dib0700_i2c_xfer_legacy()' we are taking two locks: 1. i2c_mutex 2. usb_mutex If attempt to take 'usb_mutex' lock fails then the previously taken lock 'i2c_mutex' should be unlocked and -EINTR should be returned so that caller can take appropriate action. If locking attempt was interrupted by a signal then we should return -EINTR. At present we are returning '0' for such scenarios which is wrong. Replace -EAGAIN by -EINTR as a return type for the the scenario where locking attempt was interrupted by signal. Signed-off-by:Santosh Nayak <santoshprasadnayak@gmail.com> Signed-off-by:
-
Gianluca Gennari authored
MPIS based STBs running 3.x kernels and the Enigma2 OS are not able to tune DVB-T channels with the PCTV 290e using the current cxd2820r driver. DVB-T2 channels instead work properly. This patch fixes the problem by changing the condition to break out from the wait lock loop in the "search" function of the cxd2820r demodulator from FE_HAS_SIGNAL to FE_HAS_LOCK. As a consequence, the "search" function of the demodulator driver now returns DVBFE_ALGO_SEARCH_SUCCESS only if the frequency lock is successfully acquired. This behavior seems consistent with other demodulator drivers (e.g. stv090x, hd29l2, stv0900, stb0899, mb86a16). This patch has been successfully tested with DVB-T and DVB-T2 signals, on both PC and the mipsel STB running Enigma2. No apparent side effect has been observed on PC applications like Kaffeine. DVB-C is not available in my country so it's not tested. Signed-off-by:
Gianluca Gennari <gennarone@gmail.com> Acked-by:
-
Gianluca Gennari authored
Enable the LNA amplifier also for DVB-T (like for DVB-T2 and DVB-C); this greatly improves reception of weak signals without affecting the reception of the strong ones. Experimental data (collected with the mipsel STB) on the weakest frequencies available in my area: LNA OFF: MUX level BER picture RAI mux 4 72% 32000 corrupted TIMB 2 75% 14 OK TVA Vicenza 68% 32000 corrupted RAI mux 2 78% 14 OK LNA ON: MUX level BER picture RAI mux 4 73% 1500 OK TIMB 2 76% 0 OK TVA Vicenza 69% 0 OK RAI mux 2 79% 0 OK Moreover, with LNA enabled, the PCTV 290e was able to pick up 2 new frequencies matching the integrated tuner of my Panasonic G20 TV, which is really good. Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by Masanari, this macro is using "KERN_ERR" instead of "KERN_ERROR". That would lead into a compilation breakage, if this macro were used somewhere inside the driver. Instead of fixing the macro, as originally proposed, let's just remove the dead code. Reported-by:
Masanari Iida <standby24x7@gmail.com> Signed-off-by:
-
Ezequiel García authored
The patch splits easycap_delete(), which is in charge of buffer deallocation, into smaller functions each deallocating a specific kind of buffer. Signed-off-by:
-
Ezequiel García authored
Signed-off-by:
-
Ezequiel García authored
Signed-off-by:
-
Ezequiel García authored
When the device is probed, this driver allocates audio buffers, and audio urbs. This patch just split this into separate functions, which helps clearing the currently gigantic probe function. Signed-off-by:
-
Ezequiel García authored
Signed-off-by:
-
Ezequiel García authored
This parameter is now initialized at init_easycap(), this way we assure it won't be used uninitialized. Signed-off-by:
-
Ezequiel García authored
Signed-off-by:
-
Ezequiel García authored
When the device is probed, this driver allocates frame buffers, field buffers, isoc buffers and urbs. This patch just split this into separate functions, which helps clearing the currently gigantic probe function. Signed-off-by:
-
