- 15 Jan, 2014 22 commits
-
-
Daniel Borkmann authored
[ Upstream commit b1aac815 ] Jakub reported while working with nlmon netlink sniffer that parts of the inet_diag_sockid are not initialized when r->idiag_family != AF_INET6. That is, fields of r->id.idiag_src[1 ... 3], r->id.idiag_dst[1 ... 3]. In fact, it seems that we can leak 6 * sizeof(u32) byte of kernel [slab] memory through this. At least, in udp_dump_one(), we allocate a skb in ... rep = nlmsg_new(sizeof(struct inet_diag_msg) + ..., GFP_KERNEL); ... and then pass that to inet_sk_diag_fill() that puts the whole struct inet_diag_msg into the skb, where we only fill out r->id.idiag_src[0], r->id.idiag_dst[0] and leave the rest untouched: r->id.idiag_src[0] = inet->inet_rcv_saddr; r->id.idiag_dst[0] = inet->inet_daddr; struct inet_diag_msg embeds struct inet_diag_sockid that is correctly / fully filled out in IPv6 case, but for IPv4 not. So just zero them out by using plain memset (for this little amount of bytes it's probably not worth the extra check for idiag_family == AF_INET). Similarly, fix also other places where we fill that out. Reported-by:
Jakub Zawadzki <darkjames-ws@darkjames.pl> Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Timo Teräs authored
[ Upstream commit 0e3da5bb ] ipgre_header_parse() needs to parse the tunnel's ip header and it uses mac_header to locate the iphdr. This got broken when gre tunneling was refactored as mac_header is no longer updated to point to iphdr. Introduce skb_pop_mac_header() helper to do the mac_header assignment and use it in ipgre_rcv() to fix msg_name parsing. Bug introduced in commit c5441932 (GRE: Refactor GRE tunneling code.) Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
Timo Teräs <timo.teras@iki.fi> Signed-off-by:
-
Sasha Levin authored
[ Upstream commit 37ab4fa7 ] This is similar to the set_peek_off patch where calling bind while the socket is stuck in unix_dgram_recvmsg() will block and cause a hung task spew after a while. This is also the last place that did a straightforward mutex_lock(), so there shouldn't be any more of these patches. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Hannes Frederic Sowa authored
Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Jason Wang authored
[ Upstream commit 50dc875f ] There's a possible deadlock if we flush the peers notifying work during setting mtu: [ 22.991149] ====================================================== [ 22.991173] [ INFO: possible circular locking dependency detected ] [ 22.991198] 3.10.0-54.0.1.el7.x86_64.debug #1 Not tainted [ 22.991219] ------------------------------------------------------- [ 22.991243] ip/974 is trying to acquire lock: [ 22.991261] ((&(&net_device_ctx->dwork)->work)){+.+.+.}, at: [<ffffffff8108af95>] flush_work+0x5/0x2e0 [ 22.991307] but task is already holding lock: [ 22.991330] (rtnl_mutex){+.+.+.}, at: [<ffffffff81539deb>] rtnetlink_rcv+0x1b/0x40 [ 22.991367] which lock already depends on the new lock. [ 22.991398] the existing dependency chain (in reverse order) is: [ 22.991426] -> #1 (rtnl_mutex){+.+.+.}: [ 22.991449] [<ffffffff810dfdd9>] __lock_acquire+0xb19/0x1260 [ 22.991477] [<ffffffff810e0d12>] lock_acquire+0xa2/0x1f0 [ 22.991501] [<ffffffff81673659>] mutex_lock_nested+0x89/0x4f0 [ 22.991529] [<ffffffff815392b7>] rtnl_lock+0x17/0x20 [ 22.991552] [<ffffffff815230b2>] netdev_notify_peers+0x12/0x30 [ 22.991579] [<ffffffffa0340212>] netvsc_send_garp+0x22/0x30 [hv_netvsc] [ 22.991610] [<ffffffff8108d251>] process_one_work+0x211/0x6e0 [ 22.991637] [<ffffffff8108d83b>] worker_thread+0x11b/0x3a0 [ 22.991663] [<ffffffff81095e5d>] kthread+0xed/0x100 [ 22.991686] [<ffffffff81681c6c>] ret_from_fork+0x7c/0xb0 [ 22.991715] -> #0 ((&(&net_device_ctx->dwork)->work)){+.+.+.}: [ 22.991715] [<ffffffff810de817>] check_prevs_add+0x967/0x970 [ 22.991715] [<ffffffff810dfdd9>] __lock_acquire+0xb19/0x1260 [ 22.991715] [<ffffffff810e0d12>] lock_acquire+0xa2/0x1f0 [ 22.991715] [<ffffffff8108afde>] flush_work+0x4e/0x2e0 [ 22.991715] [<ffffffff8108e1b5>] __cancel_work_timer+0x95/0x130 [ 22.991715] [<ffffffff8108e303>] cancel_delayed_work_sync+0x13/0x20 [ 22.991715] [<ffffffffa03404e4>] netvsc_change_mtu+0x84/0x200 [hv_netvsc] [ 22.991715] [<ffffffff815233d4>] dev_set_mtu+0x34/0x80 [ 22.991715] [<ffffffff8153bc2a>] do_setlink+0x23a/0xa00 [ 22.991715] [<ffffffff8153d054>] rtnl_newlink+0x394/0x5e0 [ 22.991715] [<ffffffff81539eac>] rtnetlink_rcv_msg+0x9c/0x260 [ 22.991715] [<ffffffff8155cdd9>] netlink_rcv_skb+0xa9/0xc0 [ 22.991715] [<ffffffff81539dfa>] rtnetlink_rcv+0x2a/0x40 [ 22.991715] [<ffffffff8155c41d>] netlink_unicast+0xdd/0x190 [ 22.991715] [<ffffffff8155c807>] netlink_sendmsg+0x337/0x750 [ 22.991715] [<ffffffff8150d219>] sock_sendmsg+0x99/0xd0 [ 22.991715] [<ffffffff8150d63e>] ___sys_sendmsg+0x39e/0x3b0 [ 22.991715] [<ffffffff8150eba2>] __sys_sendmsg+0x42/0x80 [ 22.991715] [<ffffffff8150ebf2>] SyS_sendmsg+0x12/0x20 [ 22.991715] [<ffffffff81681d19>] system_call_fastpath+0x16/0x1b This is because we hold the rtnl_lock() before ndo_change_mtu() and try to flush the work in netvsc_change_mtu(), in the mean time, netdev_notify_peers() may be called from worker and also trying to hold the rtnl_lock. This will lead the flush won't succeed forever. Solve this by not canceling and flushing the work, this is safe because the transmission done by NETDEV_NOTIFY_PEERS was synchronized with the netif_tx_disable() called by netvsc_change_mtu(). Reported-by:
Yaju Cao <yacao@redhat.com> Tested-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Nat Gurumoorthy authored
[ Upstream commit 388d3335 ] The new tg3 driver leaves REG_BASE_ADDR (PCI config offset 120) uninitialized. From power on reset this register may have garbage in it. The Register Base Address register defines the device local address of a register. The data pointed to by this location is read or written using the Register Data register (PCI config offset 128). When REG_BASE_ADDR has garbage any read or write of Register Data Register (PCI 128) will cause the PCI bus to lock up. The TCO watchdog will fire and bring down the system. Signed-off-by:
Nat Gurumoorthy <natg@google.com> Acked-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Sasha Levin authored
[ Upstream commit 12663bfc ] unix_dgram_recvmsg() will hold the readlock of the socket until recv is complete. In the same time, we may try to setsockopt(SO_PEEK_OFF) which will hang until unix_dgram_recvmsg() will complete (which can take a while) without allowing us to break out of it, triggering a hung task spew. Instead, allow set_peek_off to fail, this way userspace will not hang. Signed-off-by:
Pavel Emelyanov <xemul@parallels.com> Signed-off-by:
-
Changli Gao authored
[ Upstream commit d323e92c ] maxattr in genl_family should be used to save the max attribute type, but not the max command type. Drop monitor doesn't support any attributes, so we should leave it as zero. Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit a3300ef4 ] Brett Ciphery reported that new ipv6 addresses failed to get installed because the addrconf generated dsts where counted against the dst gc limit. We don't need to count those routes like we currently don't count administratively added routes. Because the max_addresses check enforces a limit on unbounded address generation first in case someone plays with router advertisments, we are still safe here. Reported-by:
Brett Ciphery <brett.ciphery@windriver.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 66e56cd4 ] Commit e40526cb introduced a cached dev pointer, that gets hooked into register_prot_hook(), __unregister_prot_hook() to update the device used for the send path. We need to fix this up, as otherwise this will not work with sockets created with protocol = 0, plus with sll_protocol = 0 passed via sockaddr_ll when doing the bind. So instead, assign the pointer directly. The compiler can inline these helper functions automagically. While at it, also assume the cached dev fast-path as likely(), and document this variant of socket creation as it seems it is not widely used (seems not even the author of TX_RING was aware of that in his reference example [1]). Tested with reproducer from e40526cb. [1] http://wiki.ipxwarzone.com/index.php5?title=Linux_packet_mmap#Example Fixes: e40526cb ("packet: fix use after free race in send path when dev is released") Signed-off-by:
Salam Noureddine <noureddine@aristanetworks.com> Tested-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Andrey Vagin authored
[ Upstream commit d4fb84ee ] free_netdev calls netif_napi_del too, but it's too late, because napi structures are placed on vi->rq. netif_napi_add() is called from virtnet_alloc_queues. general protection fault: 0000 [#1] SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: ip6table_filter ip6_tables iptable_filter ip_tables virtio_balloon pcspkr virtio_net(-) i2c_pii CPU: 1 PID: 347 Comm: rmmod Not tainted 3.13.0-rc2+ #171 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8800b779c420 ti: ffff8800379e0000 task.ti: ffff8800379e0000 RIP: 0010:[<ffffffff81322e19>] [<ffffffff81322e19>] __list_del_entry+0x29/0xd0 RSP: 0018:ffff8800379e1dd0 EFLAGS: 00010a83 RAX: 6b6b6b6b6b6b6b6b RBX: ffff8800379c2fd0 RCX: dead000000200200 RDX: 6b6b6b6b6b6b6b6b RSI: 0000000000000001 RDI: ffff8800379c2fd0 RBP: ffff8800379e1dd0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff8800379c2f90 R13: ffff880037839160 R14: 0000000000000000 R15: 00000000013352f0 FS: 00007f1400e34740(0000) GS:ffff8800bfb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f464124c763 CR3: 00000000b68cf000 CR4: 00000000000006e0 Stack: ffff8800379e1df0 ffffffff8155beab 6b6b6b6b6b6b6b2b ffff8800378391c0 ffff8800379e1e18 ffffffff8156499b ffff880037839be0 ffff880037839d20 ffff88003779d3f0 ffff8800379e1e38 ffffffffa003477c ffff88003779d388 Call Trace: [<ffffffff8155beab>] netif_napi_del+0x1b/0x80 [<ffffffff8156499b>] free_netdev+0x8b/0x110 [<ffffffffa003477c>] virtnet_remove+0x7c/0x90 [virtio_net] [<ffffffff813ae323>] virtio_dev_remove+0x23/0x80 [<ffffffff813f62ef>] __device_release_driver+0x7f/0xf0 [<ffffffff813f6ca0>] driver_detach+0xc0/0xd0 [<ffffffff813f5f28>] bus_remove_driver+0x58/0xd0 [<ffffffff813f72ec>] driver_unregister+0x2c/0x50 [<ffffffff813ae65e>] unregister_virtio_driver+0xe/0x10 [<ffffffffa0036942>] virtio_net_driver_exit+0x10/0x6ce [virtio_net] [<ffffffff810d7cf2>] SyS_delete_module+0x172/0x220 [<ffffffff810a732d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff810f5d4c>] ? __audit_syscall_entry+0x9c/0xf0 [<ffffffff81677f69>] system_call_fastpath+0x16/0x1b Code: 00 00 55 48 8b 17 48 b9 00 01 10 00 00 00 ad de 48 8b 47 08 48 89 e5 48 39 ca 74 29 48 b9 00 02 20 00 00 00 RIP [<ffffffff81322e19>] __list_del_entry+0x29/0xd0 RSP <ffff8800379e1dd0> ---[ end trace d5931cd3f87c9763 ]--- Fixes: 986a4f4d (virtio_net: multiqueue support) Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by:
Andrey Vagin <avagin@openvz.org> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
-
Jason Wang authored
[ Upstream commit ce232ce0 ] macvtap_put_user() never return a value grater than iov length, this in fact bypasses the truncated checking in macvtap_recvmsg(). Fix this by always returning the size of packet plus the possible vlan header to let the trunca checking work. Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Vlad Yasevich <vyasevich@gmail.com> Acked-by:
-
Zhi Yong Wu authored
[ Upstream commit d0b7da8a ] Signed-off-by:
Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by:
-
Zhi Yong Wu authored
[ Upstream commit e6ebc7f1 ] Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit 006da7b0 ] Currently macvlan will count received packets after calling each vlans receive handler. Macvtap attempts to count the packet yet again when the user reads the packet from the tap socket. This code doesn't do this consistently either. Remove the counting from macvtap and let only macvlan count received packets. Signed-off-by:
Vlad Yasevich <vyasevic@redhat.com> Acked-by:
-
Venkat Venkatsubra authored
[ Upstream commit 18fc25c9 ] After congestion update on a local connection, when rds_ib_xmit returns less bytes than that are there in the message, rds_send_xmit calls back rds_ib_xmit with an offset that causes BUG_ON(off & RDS_FRAG_SIZE) to trigger. For a 4Kb PAGE_SIZE rds_ib_xmit returns min(8240,4096)=4096 when actually the message contains 8240 bytes. rds_send_xmit thinks there is more to send and calls rds_ib_xmit again with a data offset "off" of 4096-48(rds header) =4048 bytes thus hitting the BUG_ON(off & RDS_FRAG_SIZE) [RDS_FRAG_SIZE=4k]. The commit 6094628b "rds: prevent BUG_ON triggering on congestion map updates" introduced this regression. That change was addressing the triggering of a different BUG_ON in rds_send_xmit() on PowerPC architecture with 64Kbytes PAGE_SIZE: BUG_ON(ret != 0 && conn->c_xmit_sg == rm->data.op_nents); This was the sequence it was going through: (rds_ib_xmit) /* Do not send cong updates to IB loopback */ if (conn->c_loopback && rm->m_inc.i_hdr.h_flags & RDS_FLAG_CONG_BITMAP) { rds_cong_map_updated(conn->c_fcong, ~(u64) 0); return sizeof(struct rds_header) + RDS_CONG_MAP_BYTES; } rds_ib_xmit returns 8240 rds_send_xmit: c_xmit_data_off = 0 + 8240 - 48 (rds header accounted only the first time) = 8192 c_xmit_data_off < 65536 (sg->length), so calls rds_ib_xmit again rds_ib_xmit returns 8240 rds_send_xmit: c_xmit_data_off = 8192 + 8240 = 16432, calls rds_ib_xmit again and so on (c_xmit_data_off 24672,32912,41152,49392,57632) rds_ib_xmit returns 8240 On this iteration this sequence causes the BUG_ON in rds_send_xmit: while (ret) { tmp = min_t(int, ret, sg->length - conn->c_xmit_data_off); [tmp = 65536 - 57632 = 7904] conn->c_xmit_data_off += tmp; [c_xmit_data_off = 57632 + 7904 = 65536] ret -= tmp; [ret = 8240 - 7904 = 336] if (conn->c_xmit_data_off == sg->length) { conn->c_xmit_data_off = 0; sg++; conn->c_xmit_sg++; BUG_ON(ret != 0 && conn->c_xmit_sg == rm->data.op_nents); [c_xmit_sg = 1, rm->data.op_nents = 1] What the current fix does: Since the congestion update over loopback is not actually transmitted as a message, all that rds_ib_xmit needs to do is let the caller think the full message has been transmitted and not return partial bytes. It will return 8240 (RDS_CONG_MAP_BYTES+48) when PAGE_SIZE is 4Kb. And 64Kb+48 when page size is 64Kb. Reported-by:
Josh Hunt <joshhunt00@gmail.com> Tested-by:
Honggang Li <honli@redhat.com> Acked-by:
Bang Nguyen <bang.nguyen@oracle.com> Signed-off-by:
Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 28e24c62 ] Few network drivers really supports frag_list : virtual drivers. Some drivers wrongly advertise NETIF_F_FRAGLIST feature. If skb with a frag_list is given to them, packet on the wire will be corrupt. Remove this flag, as core networking stack will make sure to provide packets that can be sent without corruption. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Cc: Anirudha Sarangi <anirudh@xilinx.com> Signed-off-by:
-
Kamala R authored
[ Upstream commit 7150aede ] The behaviour of blackhole and prohibit routes has been corrected by setting the input and output pointers of the dst variable appropriately. For blackhole routes, they are set to dst_discard and to ip6_pkt_discard and ip6_pkt_discard_out respectively for prohibit routes. ipv6: ip6_pkt_prohibit(_out) should not depend on CONFIG_IPV6_MULTIPLE_TABLES We need ip6_pkt_prohibit(_out) available without CONFIG_IPV6_MULTIPLE_TABLES Signed-off-by:
Kamala R <kamala@aristanetworks.com> Acked-by:
-
Nestor Lopez Casado authored
commit c63e0e37 upstream. This reverts commit 8af6c088. This patch re-adds the workaround introduced by 59626408 which was reverted by 8af6c088. The original patch 596264 was needed to overcome a situation where the hid-core would drop incoming reports while probe() was being executed. This issue was solved by c849a614 which added hid_device_io_start() and hid_device_io_stop() that enable a specific hid driver to opt-in for input reports while its probe() is being executed. Commit a9dd22b7 modified hid-logitech-dj so as to use the functionality added to hid-core. Having done that, workaround 596264 was no longer necessary and was reverted by 8af6c088. We now encounter a different problem that ends up 'again' thwarting the Unifying receiver enumeration. The problem is time and usb controller dependent. Ocasionally the reports sent to the usb receiver to start the paired devices enumeration fail with -EPIPE and the receiver never gets to enumerate the paired devices. With dcd9006b the problem was "hidden" as the call to the usb driver became asynchronous and none was catching the error from the failing URB. As the root cause for this failing SET_REPORT is not understood yet, -possibly a race on the usb controller drivers or a problem with the Unifying receiver- reintroducing this workaround solves the problem. Overall what this workaround does is: If an input report from an unknown device is received, then a (re)enumeration is performed. related bug: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1194649Signed-off-by:
Nestor Lopez Casado <nlopezcasad@logitech.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Kuninori Morimoto authored
commit c234962b upstream. R-Car H1 or Gen2 GPIO interrupts are assigned per each GPIO domain, but, Gen1 E1/M1 GPIO interrupts are shared for all GPIO domain. gpio-rcar driver needs IRQF_SHARED flags for these. This patch was tested on Bock-W board Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Magnus Damm authored
commit 2199a557 upstream. Update the STI driver by setting cpu_possible_mask to make EMEV2 SMP work as expected together with the ARM broadcast timer. This breakage was introduced by: f7db706b ARM: 7674/1: smp: Avoid dummy clockevent being preferred over real hardware clock-event Without this fix SMP operation is broken on EMEV2 since no broadcast timer interrupts trigger on the secondary CPU cores. Signed-off-by:
Magnus Damm <damm@opensource.se> Tested-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
Axel Lin authored
commit dfaf820a upstream. The code in goto err3 path is wrong because it will call fee_irq() with k == 0, which means it does free_irq(p->irq[-1].requested_irq, &p->irq[-1]); Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
-
- 09 Jan, 2014 18 commits
-
-
Greg Kroah-Hartman authored
-
Nobuhiro Iwamatsu authored
commit ad70b029 upstream. Min_low_pfn and max_low_pfn were used in pfn_valid macro if defined CONFIG_FLATMEM. When the functions that use the pfn_valid is used in driver module, max_low_pfn and min_low_pfn is to undefined, and fail to build. ERROR: "min_low_pfn" [drivers/block/aoe/aoe.ko] undefined! ERROR: "max_low_pfn" [drivers/block/aoe/aoe.ko] undefined! make[2]: *** [__modpost] Error 1 make[1]: *** [modules] Error 2 This patch fix this problem. Signed-off-by:
Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@gmail.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Eric Whitney authored
commit d0abafac upstream. Commit f5a44db5 introduced a regression on filesystems created with the bigalloc feature (cluster size > blocksize). It causes xfstests generic/006 and /013 to fail with an unexpected JBD2 failure and transaction abort that leaves the test file system in a read only state. Other xfstests run on bigalloc file systems are likely to fail as well. The cause is the accidental use of a cluster mask where a cluster offset was needed in ext4_ext_map_blocks(). Signed-off-by:
Eric Whitney <enwlinux@gmail.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Catalin Marinas authored
commit 4f00130b upstream. This provides better performance compared to Device GRE and also allows unaligned accesses. Such memory is intended to be used with standard RAM (e.g. framebuffers) and not I/O. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by:
-
Catalin Marinas authored
commit 7249b79f upstream. The D-cache on AArch64 is VIPT non-aliasing, so there is no need to flush it for anonymous pages. Signed-off-by:
Will Deacon <will.deacon@arm.com> Acked-by:
-
Catalin Marinas authored
commit b5b6c9e9 upstream. The flush_dcache_page() function is called when the kernel modified a page cache page. Since the D-cache on AArch64 does not have aliases this function can simply mark the page as dirty for later flushing via set_pte_at()/__sync_icache_dcache() if the page is executable (to ensure the I-D cache coherency). Signed-off-by:
-
Mark Rutland authored
commit f793c23e upstream. To use the virtual counters from the host, we need to ensure that CNTVOFF doesn't change unexpectedly. When we change to a guest, we replace the host's CNTVOFF, but we don't restore it when returning to the host. As the host sets CNTVOFF to zero, and never changes it, we can simply zero CNTVOFF when returning to the host. This patch adds said zeroing to the return to host path. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by:
Christoffer Dall <cdall@cs.columbia.edu> Cc: Mark Brown <broonie@kernel.org> Signed-off-by:
-
Marc Zyngier authored
commit 0af0b189 upstream. In order to be able to use the virtual counter in a safe way, make sure it is initialized to zero before dropping to SVC. Signed-off-by:
-
Mark Rutland authored
commit 0d651e4e upstream. Switching between reading the virtual or physical counters is problematic, as some core code wants a view of time before we're fully set up. Using a function pointer and switching the source after the first read can make time appear to go backwards, and having a check in the read function is an unfortunate block on what we want to be a fast path. Instead, this patch makes us always use the virtual counters. If we're a guest, or don't have hyp mode, we'll use the virtual timers, and as such don't care about CNTVOFF as long as it doesn't change in such a way as to make time appear to travel backwards. As the guest will use the virtual timers, a (potential) KVM host must use the physical timers (which can wake up the host even if they fire while a guest is executing), and hence a host must have CNTVOFF set to zero so as to have a consistent view of time between the physical timers and virtual counters. Signed-off-by:
-
Catalin Marinas authored
commit f3a1d7d5 upstream. This string has been moved to arch/arm64/kernel/cputable.c. Signed-off-by:
-
Catalin Marinas authored
commit df503ba7 upstream. With the spin-table SMP booting method, secondary CPUs poll a location passed in the DT. The foundation-v8.dts file doesn't have this memory reserved and there is a risk of Linux using it before secondary CPUs are started. Signed-off-by:
-
AKASHI Takahiro authored
commit 7b22c035 upstream. In ftrace_syscall_enter(), syscall_get_arguments(..., 0, n, ...) if (i == 0) { <handle orig_x0> ...; n--;} memcpy(..., n * sizeof(args[0])); If 'number of arguments(n)' is zero and 'argument index(i)' is also zero in syscall_get_arguments(), none of arguments should be copied by memcpy(). Otherwise 'n--' can be a big positive number and unexpected amount of data will be copied. Tracing system calls which take no argument, say sync(void), may hit this case and eventually make the system corrupted. This patch fixes the issue both in syscall_get_arguments() and syscall_set_arguments(). Signed-off-by:
AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by:
-
Jiang Liu authored
commit 6db83cea upstream. If context switching happens during executing fpsimd_flush_thread(), stale value in FPSIMD registers will be saved into current thread's fpsimd_state by fpsimd_thread_switch(). That may cause invalid initialization state for the new process, so disable preemption when executing fpsimd_flush_thread(). Signed-off-by:
Jiang Liu <jiang.liu@huawei.com> Cc: Jiang Liu <liuj97@gmail.com> Signed-off-by:
-
Feng Kan authored
commit 845ad05e upstream. Written by Catalin Marinas, tested by APM on storm platform. This is needed because of the failures encountered when running SpecWeb benchmark test. Signed-off-by:
Feng Kan <fkan@apm.com> Acked-by:
Kumar Sankaran <ksankaran@apm.com> Signed-off-by:
-
Mark Rutland authored
commit 82b2f495 upstream. Secondary CPUs write to __boot_cpu_mode with caches disabled, and thus a cached value of __boot_cpu_mode may be incoherent with that in memory. This could lead to a failure to detect mismatched boot modes. This patch adds flushing to ensure that writes by secondaries to __boot_cpu_mode are made visible before we test against it. Signed-off-by:
-
Catalin Marinas authored
commit 53ae3acd upstream. There is a slight chance that (timer) interrupts are triggered before a secondary CPU has been marked online with implications on softirq thread affinity. Signed-off-by:
Kirill Tkhai <tkhai@yandex.ru> Cc: Mark Brown <broonie@kernel.org> Signed-off-by:
-
Josh Durgin authored
commit da6a6b63 upstream. rbd_snap_name() calls rbd_dev_v{1,2}_snap_name() depending on the format of the image. The format 1 version returns NULL on error, which is handled by the caller. The format 2 version returns an ERR_PTR, which the caller of rbd_snap_name() does not expect. Fortunately this is unlikely to occur in practice because rbd_snap_id_by_name() is called before rbd_snap_name(). This would hit similar errors to rbd_snap_name() (like the snapshot not existing) and return early, so rbd_snap_name() would not hit an error unless the snapshot was removed between the two calls or memory was exhausted. Use an ERR_PTR in rbd_dev_v1_snap_name() so that the specific error can be propagated, and it is consistent with rbd_dev_v2_snap_name(). Handle the ERR_PTR in the only rbd_snap_name() caller. Suggested-by:
Alex Elder <alex.elder@linaro.org> Signed-off-by:
Josh Durgin <josh.durgin@inktank.com> Reviewed-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Josh Durgin authored
commit efadc98a upstream. This prevents erroring out while adding a device when a snapshot unrelated to the current mapping is deleted between reading the snapshot context and reading the snapshot names. If the mapped snapshot name is not found an error still occurs as usual. Signed-off-by:
-
