s/send/receive/
The buffer in the receive function is
not used for sending
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KDoc function section start with double start:  /** instead of /*
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Long messages are read in chunks, to prevent trashing runtime pm between
the reading of the chunks we call pm_runtime_mark_last_busy() on
non-final chunk message as the next chunk of the same message will be
received immediately in the next interrupt with high probablity.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In process of client devices removal from the bus there still
might be communication between a driver and the mei device
hence we need to cancel supporting workers only after all
the client devices were removed.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Let's stop using legacy platform driver hooks for power management and
switch to using the standard dev_pm_ops-based hooks.

Also, instead of guarding PM methods with #ifdef CONFIG_PM annotate them
as __maybe_unused as it provides better compile coverage.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In scif_node_connect() we were returning if the initialization of p2p_ji
fails. But at that time p2p_ij has already been initialized and
resources allocated for it. And since p2p_ij is not added to the list
till now so we will have a leak.
Lets deinitialize and release the resources connected to p2p_ij.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Handle a failed device_register(), replace kfree() with put_device(),
which will call cosm/mbus/scif_release_dev().
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes randconfig build error reported at
http://www.spinics.net/lists/kernel/msg2092346.htmlReported-by: Jim Davis <jim.epost@gmail.com>
Reviewed-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Gabriel Laskar <gabriel@lse.epita.fr>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

devm_ioremap() returns NULL on error, it doesn't return an ERR_PTR,
which is what the current code does. This patch corrects these
checks.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

STM policy handling is basically configfs, I honestly don't know how we
ended up without a Kconfig dependency, but thanks to randconfig testing,
it's now caught.
Reported-by: Jim Davis <jim.epost@gmail.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'extcon-next-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update extcon for 4.4

Detailed description for patchset:
1. Update the extcon core:
- Modify the unique identification and name of each external connector
  with the additional prefix to clarify both attribute and meaning of
  external connector as following:
: EXTCON_CHG_* mean the charger connector.
: EXTCON_JACK_* mean the jack connector.
: EXTCON_DISP_* mean the display port connector.

- Keep the standard name of USB charging port by refering to the
  "Battery Charging v1.2 Spec and Adopters Agreement"[1] to use
  the standard name of USB charging port as following:
: EXTCON_CHG_USB_SDP /* Standard Downstream Port */
: EXTCON_CHG_USB_DCP /* Dedicated Charging Port */
: EXTCON_CHG_USB_CDP /* Charging Downstream Port */
: EXTCON_CHG_USB_ACA /* Accessory Charger Adapter */
[1] www.usb.org/developers/docs/devclass_docs/BCv1.2_070312.zip

2. Update the extcon-arizona.c driver:
- Support the WM8998 and WM1814 codec for jack detection.
- Support for the ADC mode microphone detection and the general
  purpose switch for pop suppression.
- Fix bug include fixing the headphone detection accuracy
  at the top end of the range and some corrections around
  the use of the microphone clamps.

3. Update the extcon-gpio.c driver:
- Clean-up the extcon-gpio driver and fix minor issue before
  supporting the Device tree binding of it.

4. Clean-up and fix the minor issue for extcon drivers:
- Export OF module alias information for extcon-rt8973a.c and extcon-sm5502.c.
- Fix wrong type of variable of for extcon-rt8973a.c and extcon-sm5502.c.
- Use resource managed API for extcon-axp288.c.

This patch modifies the id and name of external connector with the
additional prefix to clarify both attribute and meaning of external
connector as following:
- EXTCON_CHG_* mean the charger connector.
- EXTCON_JACK_* mean the jack connector.
- EXTCON_DISP_* mean the display port connector.

Following table show the new name of external connector with old name:
--------------------------------------------------
Old extcon name         | New extcon name        |
--------------------------------------------------
EXTCON_TA               | EXTCON_CHG_USB_DCP     |
EXTCON_CHARGE_DOWNSTREAM| EXTCON_CHG_USB_CDP     |
EXTCON_FAST_CHARGER     | EXTCON_CHG_USB_FAST    |
EXTCON_SLOW_CHARGER     | EXTCON_CHG_USB_SLOW    |
--------------------------------------------------
EXTCON_MICROPHONE       | EXTCON_JACK_MICROPHONE |
EXTCON_HEADPHONE        | EXTCON_JACK_HEADPHONE  |
EXTCON_LINE_IN          | EXTCON_JACK_LINE_IN    |
EXTCON_LINE_OUT         | EXTCON_JACK_LINE_OUT   |
EXTCON_VIDEO_IN         | EXTCON_JACK_VIDEO_IN   |
EXTCON_VIDEO_OUT        | EXTCON_JACK_VIDEO_OUT  |
EXTCON_SPDIF_IN         | EXTCON_JACK_SPDIF_IN   |
EXTCON_SPDIF_OUT        | EXTCON_JACK_SPDIF_OUT  |
--------------------------------------------------
EXTCON_HMDI             | EXTCON_DISP_HDMI       |
EXTCON_MHL              | EXTCON_DISP_MHL        |
EXTCON_DVI              | EXTCON_DISP_DVI        |
EXTCON_VGA              | EXTCON_DISP_VGA        |
--------------------------------------------------

And, when altering the name of USB charger connector, EXTCON refers to the
"Battery Charging v1.2 Spec and Adopters Agreement"[1] to use the standard
name of USB charging port as following. Following name of USB charging port
are already used in power_supply subsystem. We chan check it on patch[2].
- EXTCON_CHG_USB_SDP	/* Standard Downstream Port */
- EXTCON_CHG_USB_DCP	/* Dedicated Charging Port */
- EXTCON_CHG_USB_CDP	/* Charging Downstream Port */
- EXTCON_CHG_USB_ACA	/* Accessory Charger Adapter */

[1] www.usb.org/developers/docs/devclass_docs/BCv1.2_070312.zip
[2] commit 85efc8a1 ("power_supply: Add types for USB chargers")
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
[ckeepax: For the Arizona changes]
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>

We want the fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull scheduler fix from Thomas Gleixner:
 "Fix a long standing state race in finish_task_switch()"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/core: Fix TASK_DEAD race in finish_task_switch()

Pull perf fix from Thomas Glexiner:
 "Fix build breakage on powerpc in perf tools"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Fix build break on powerpc due to sample_reg_masks

Pull maintainer email update from Thomas Gleixner:
 "Change Matt Fleming's email address in the maintainers file"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  MAINTAINERS: Change Matt Fleming's email address

Pull irq fixes from Thomas Gleixner:
 "Three trivial commits:

   - Fix a kerneldoc regression

   - Export handle_bad_irq to unbreak a driver in next

   - Add an accessor for the of_node field so refactoring in next does
     not depend on merge ordering"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqdomain: Add an accessor for the of_node field
  genirq: Fix handle_bad_irq kerneldoc comment
  genirq: Export handle_bad_irq

Pull SCSI fixes from James Bottomley:
 "This is a set of three bug fixes, two of which are regressions from
  recent updates (the 3ware one from 4.1 and the device handler fixes
  from 4.2)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  3w-9xxx: don't unmap bounce buffered commands
  scsi_dh: Use the correct module name when loading device handler
  libiscsi: Fix iscsi_check_transport_timeouts possible infinite loop

Pull md bugfix from Neil Brown:
 "One bug fix for raid1/raid10.

  Very careless bug earler in 4.3-rc, now fixed :-)"

* tag 'md/4.3-rc4-fix' of git://neil.brown.name/md:
  crash in md-raid1 and md-raid10 due to incorrect list manipulation

My Intel email address will soon expire. Replace it with my
personal address so people still know where to send patches.
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1444494136-10333-1-git-send-email-matt@codeblueprint.co.ukSigned-off-by: Ingo Molnar <mingo@kernel.org>

Add fpga manager framework to MAINTAINERS and add myself as
maintainer.
Signed-off-by: Alan Tull <atull@opensource.altera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use unsigned long in place of size_t to operate on buffer sizes and
offsets to clean up the 32 bit build.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Source device's link is protected with srcu, mark it as such to have
proper build-time validation of accesses to this field. The update
side that's dereferencing it under an update lock also needs an
accessor to dereference this field to keep sparse happy.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull USB fixes from Greg KH:
 "Here are some small USB and PHY fixes and quirk updates for 4.3-rc5.

  Nothing major here, full details in the shortlog, and all of these
  have been in linux-next for a while"

* tag 'usb-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: Add device quirk for Logitech PTZ cameras
  USB: chaoskey read offset bug
  USB: Add reset-resume quirk for two Plantronics usb headphones.
  usb: renesas_usbhs: Add support for R-Car H3
  usb: renesas_usbhs: fix build warning if 64-bit architecture
  usb: gadget: bdc: fix memory leak
  phy: berlin-sata: Fix module autoload for OF platform driver
  phy: rockchip-usb: power down phy when rockchip phy probe
  phy: qcom-ufs: fix build error when the component is built as a module

Pull tty/serial driver fixes from Greg KH:
 "Here are a few bug fixes for the tty core that resolve reported
  issues, and some serial driver fixes as well (including the
  much-reported imx driver problem)

  All of these have been in linux-next with no reported problems"

* tag 'tty-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  drivers/tty: require read access for controlling terminal
  serial: 8250: add uart_config entry for PORT_RT2880
  tty: fix data race on tty_buffer.commit
  tty: fix data race in tty_buffer_flush
  tty: fix data race in flush_to_ldisc
  tty: fix stall caused by missing memory barrier in drivers/tty/n_tty.c
  serial: atmel: fix error path of probe function
  tty: don't leak cdev in tty_cdev_add()
  Revert "serial: imx: remove unbalanced clk_prepare"

Pull staging fixes from Greg KH:
 "Here are two tiny staging tree fixes for 4.3-rc5.

  One fixes the broken speakup subsystem as reported by a user, and the
  other removes an entry in the MAINTAINERS file for a developer that
  doesn't want to be listed anymore"

* tag 'staging-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: speakup: fix speakup-r regression
  MAINTAINERS: Remove myself as nvec co-maintainer

Pull char/misc driver fixes from Greg KH:
 "Here are some small fixes for some misc drivers that resolve some
  reported issues.  All of these have been linux-next for a while"

* tag 'char-misc-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  mcb: Fix error handling in mcb_pci_probe()
  mei: hbm: fix error in state check logic
  nvmem: sunxi: Check for memory allocation failure
  nvmem: core: Fix memory leak in nvmem_cell_write
  nvmem: core: Handle shift bits in-place if cell->nbits is non-zero
  nvmem: core: fix the out-of-range leak in read/write()

Pull MIPS fixes from Ralf Baechle:

 - MIPS didn't define the new ioremap_uc.  Defined it as an alias for
   ioremap_uncached.

 - Replace workaround for MIPS16 build issue with a correct one.

* git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Define ioremap_uc
  MIPS: UAPI: Ignore __arch_swab{16,32,64} when using MIPS16
  Revert "MIPS: UAPI: Fix unrecognized opcode WSBH/DSBH/DSHD when using MIPS16."

Pull swiotlb fixlet from Konrad Rzeszutek Wilk:
 "Enable the SWIOTLB under 32-bit PAE kernels.

  Nowadays most distros enable this due to CONFIG_HYPERVISOR|XEN=y which
  select SWIOTLB.  But for those that are not interested in
  virtualization and wanting to use 32-bit PAE kernels and wanting to
  have working DMA operations - this configures it for them"

* 'stable/for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
  swiotlb: Enable it under x86 PAE

Leandro Awa writes:
 "After switching to version 4.1.6, our parallelized and distributed
  workflows now fail consistently with errors of the form:

  T34: ./regex.c:39:22: error: config.h: No such file or directory

  From our 'git bisect' testing, the following commit appears to be the
  possible cause of the behavior we've been seeing: commit 766c4cbf"

Al Viro says:
 "What happens is that 766c4cbf got the things subtly wrong.

  We used to treat d_is_negative() after lookup_fast() as "fall with
  ENOENT".  That was wrong - checking ->d_flags outside of ->d_seq
  protection is unreliable and failing with hard error on what should've
  fallen back to non-RCU pathname resolution is a bug.

  Unfortunately, we'd pulled the test too far up and ran afoul of
  another kind of staleness.  The dentry might have been absolutely
  stable from the RCU point of view (and we might be on UP, etc), but
  stale from the remote fs point of view.  If ->d_revalidate() returns
  "it's actually stale", dentry gets thrown away and the original code
  wouldn't even have looked at its ->d_flags.

  What we need is to check ->d_flags where 766c4cbf does (prior to
  ->d_seq validation) but only use the result in cases where we do not
  discard this dentry outright"
Reported-by: Leandro Awa <lawa@nvidia.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=104911
Fixes: 766c4cbf ("namei: d_is_negative() should be checked...")
Tested-by: Leandro Awa <lawa@nvidia.com>
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull power management and ACPI fixes from Rafael Wysocki:
 "These are four fixes for bugs in the devfreq and cpufreq subsystems,
  including two regression fixes (one for a recent regression and one
  for a problem introduced in 4.2).

  Specifics:

   - Two fixes for cpufreq regressions, an acpi-cpufreq driver one
     introduced during the 4.2 cycle when we started to preserve cpufreq
     directories for offline CPUs and a general one introduced recently
     (Srinivas Pandruvada).

   - Two devfreq fixes, one for a double kfree() in an error code path
     and one for a confusing sysfs-related failure (Geliang Tang, Tobias
     Jakobi)"

* tag 'pm+acpi-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: prevent lockup on reading scaling_available_frequencies
  cpufreq: acpi_cpufreq: prevent crash on reading freqdomain_cpus
  PM / devfreq: fix double kfree
  PM / devfreq: Fix governor_store()

Pull strscpy powerpc fix from Chris Metcalf.

Fix powerpc big-endian build.

* 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/powerpc: provide zero_bytemask() for big-endian

Pull sound fixes from Takashi Iwai:
 "We see various small fixes, but nothing looks too scary, all are small
  gentle bug fixes:

   - Most of changes are for ASoC codecs: Realtek, SGTL5000, TAS2552,
     TLV320, WM8962

   - A couple of dwc and imx-ssi fixes

   - Usual oneliner HD-audio quirks

   - An old emux synth code fix"

* tag 'sound-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  MAINTAINERS: Remove wm97xx entry
  ASoC: tas2552: fix dBscale-min declaration
  ALSA: synth: Fix conflicting OSS device registration on AWE32
  ALSA: hda - Disable power_save_node for IDT 92HD73xx chips
  ALSA: hda - Apply SPDIF pin ctl to MacBookPro 12,1
  ALSA: hda: Add dock support for ThinkPad T550
  ASoC: dwc: fix dma stop transferring issue
  ASoC: dwc: correct irq clear method
  ASoC: tlv320aic3x: Prevent writing reserved registers on tlv320aic3104 CODECs
  ASoC: rt5645: Correct the naming and setting of ADC Boost Volume Control
  ASoC: sgtl5000: fix wrong register MIC_BIAS_VOLTAGE setup on probe
  ASoC: wm8962: balance pm_runtime_enable
  ASoC: imx-ssi: Fix DAI hardware signal inversions
  ASoC: sgtl5000: fix error message output for MicBias voltage
  ASoC: db1200: Fix DAI link format for db1300 and db1550

Pull clk fixes from Stephen Boyd:
 "A Samsung driver fix and a handful of TI driver fixes"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: ti: dflt: fix enable_reg validity check
  clk: ti: fix dual-registration of uart4_ick
  clk: ti: clk-7xx: Remove hardwired ABE clock configuration
  clk: samsung: fix cpu clock's flags checking

Pull MMC fixes from Ulf Hansson:
 "MMC host:
   - omap_hsmmc: Fix boot regressions for omap4430
   - omap_hsmmc: Fix legacy boot regression for omap3
   - sdhci-pxav3: Fix some clock issues for Armada 38x
   - sdhci-pxav3: Fix error handling at probe
   - sdhci-of-at91: Fix clock stabilization problem"

* tag 'mmc-v4.3-rc4' of git://git.linaro.org/people/ulf.hansson/mmc:
  mmc: sdhci-of-at91: use SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST quirk
  mmc: sdhci: add quirk SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST
  mmc: sdhci-pxav3: fix error handling of armada_38x_quirks
  mmc: sdhci-pxav3: disable clock inversion for HS MMC cards
  mmc: sdhci-pxav3: remove broken clock base quirk for Armada 38x sdhci driver
  mmc: host: omap_hsmmc: Fix MMC for omap3 legacy booting
  Revert "mmc: host: omap_hsmmc: use regulator_is_enabled to find pbias status"

Pull dm fixes from Mike Snitzer:
 "Three stable fixes:

   - DM core AB-BA deadlock fix in the device destruction path (vs
     device creation's DM table swap).

   - DM raid fix to properly round up the region_size to the next
     power-of-2.

   - DM cache fix for a NULL pointer seen while switching from the
     "cleaner" cache policy.

  Two fixes for regressions introduced during the 4.3 merge:

   - request-based DM error propagation regressed due to incorrect
     changes introduced when adding the bi_error field to bio.

   - DM snapshot fix to only support snapshots that overflow if the
     client (e.g. lvm2) is prepared to deal with the associated
     snapshot status interface change"

* tag 'dm-4.3-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm snapshot: add new persistent store option to support overflow
  dm cache: fix NULL pointer when switching from cleaner policy
  dm: fix request-based dm error reporting
  dm raid: fix round up of default region size
  dm: fix AB-BA deadlock in __dm_destroy()

Pull btrfs fixes from Chris Mason:
 "These are small and assorted.  Neil's is the oldest, I dropped the
  ball thinking he was going to send it in"

* 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: support NFSv2 export
  Btrfs: open_ctree: Fix possible memory leak
  Btrfs: fix deadlock when finalizing block group creation
  Btrfs: update fix for read corruption of compressed and shared extents
  Btrfs: send, fix corner case for reference overwrite detection

Pull nfsd bugfix from Bruce Fields:
 "Just one RDMA bugfix"

* tag 'nfsd-4.3-1' of git://linux-nfs.org/~bfields/linux:
  svcrdma: handle rdma read with a non-zero initial page offset