Add a Siena Kconfig option and use it in stead of the sfc one.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add a Siena Kconfig option and use it in stead of the sfc one.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Vladimir Oltean says:

====================
Restructure struct ocelot_port

This patch set represents preparation for further work. It adds an
"index" field to struct ocelot_port, and populates it from the Felix DSA
driver and Ocelot switchdev driver.

The users of struct ocelot_port :: index are the same users as those of
struct ocelot_port_private :: chip_port.
====================

Link: https://lore.kernel.org/r/20220511100637.568950-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently the ocelot switch lib is unaware of the index of a struct
ocelot_port, since that is kept in the encapsulating structures of outer
drivers (struct dsa_port :: index, struct ocelot_port_private :: chip_port).

With the upcoming increase in complexity associated with assigning DSA
tag_8021q CPU ports to certain user ports, it becomes necessary for the
switch lib to be able to retrieve the index of a certain ocelot_port.

Therefore, introduce a new u8 to ocelot_port (same size as the chip_port
used by the ocelot switchdev driver) and rework the existing code to
populate and use it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Reorder members of struct ocelot_port to eliminate holes and reduce
structure size. Pahole says:

Before:

struct ocelot_port {
        struct ocelot *            ocelot;               /*     0     8 */
        struct regmap *            target;               /*     8     8 */
        bool                       vlan_aware;           /*    16     1 */

        /* XXX 7 bytes hole, try to pack */

        const struct ocelot_bridge_vlan  * pvid_vlan;    /*    24     8 */
        unsigned int               ptp_skbs_in_flight;   /*    32     4 */
        u8                         ptp_cmd;              /*    36     1 */

        /* XXX 3 bytes hole, try to pack */

        struct sk_buff_head        tx_skbs;              /*    40    96 */
        /* --- cacheline 2 boundary (128 bytes) was 8 bytes ago --- */
        u8                         ts_id;                /*   136     1 */

        /* XXX 3 bytes hole, try to pack */

        phy_interface_t            phy_mode;             /*   140     4 */
        bool                       is_dsa_8021q_cpu;     /*   144     1 */
        bool                       learn_ena;            /*   145     1 */

        /* XXX 6 bytes hole, try to pack */

        struct net_device *        bond;                 /*   152     8 */
        bool                       lag_tx_active;        /*   160     1 */

        /* XXX 1 byte hole, try to pack */

        u16                        mrp_ring_id;          /*   162     2 */

        /* XXX 4 bytes hole, try to pack */

        struct net_device *        bridge;               /*   168     8 */
        int                        bridge_num;           /*   176     4 */
        u8                         stp_state;            /*   180     1 */

        /* XXX 3 bytes hole, try to pack */

        int                        speed;                /*   184     4 */

        /* size: 192, cachelines: 3, members: 18 */
        /* sum members: 161, holes: 7, sum holes: 27 */
        /* padding: 4 */
};

After:

struct ocelot_port {
        struct ocelot *            ocelot;               /*     0     8 */
        struct regmap *            target;               /*     8     8 */
        struct net_device *        bond;                 /*    16     8 */
        struct net_device *        bridge;               /*    24     8 */
        const struct ocelot_bridge_vlan  * pvid_vlan;    /*    32     8 */
        phy_interface_t            phy_mode;             /*    40     4 */
        unsigned int               ptp_skbs_in_flight;   /*    44     4 */
        struct sk_buff_head        tx_skbs;              /*    48    96 */
        /* --- cacheline 2 boundary (128 bytes) was 16 bytes ago --- */
        u16                        mrp_ring_id;          /*   144     2 */
        u8                         ptp_cmd;              /*   146     1 */
        u8                         ts_id;                /*   147     1 */
        u8                         stp_state;            /*   148     1 */
        bool                       vlan_aware;           /*   149     1 */
        bool                       is_dsa_8021q_cpu;     /*   150     1 */
        bool                       learn_ena;            /*   151     1 */
        bool                       lag_tx_active;        /*   152     1 */

        /* XXX 3 bytes hole, try to pack */

        int                        bridge_num;           /*   156     4 */
        int                        speed;                /*   160     4 */

        /* size: 168, cachelines: 3, members: 18 */
        /* sum members: 161, holes: 1, sum holes: 3 */
        /* padding: 4 */
        /* last cacheline: 40 bytes */
};
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This is no longer used since commit 7c4bb540 ("net: dsa: tag_ocelot:
create separate tagger for Seville").
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Vladimir Oltean says:

====================
DSA changes for multiple CPU ports (part 1)

I am trying to enable the second internal port pair from the NXP LS1028A
Felix switch for DSA-tagged traffic via "ocelot-8021q". This series
represents part 1 (of an unknown number) of that effort.

It does some preparation work, like managing host flooding in DSA via a
dedicated method, and removing the CPU port as argument from the tagging
protocol change procedure.

In terms of driver-specific changes, it reworks the 2 tag protocol
implementations in the Felix driver to have a structured data format.
It enables host flooding towards all tag_8021q CPU ports. It dynamically
updates the tag_8021q CPU port used for traps. It also fixes a bug
introduced by a previous refactoring/oversimplification commit in
net-next.
====================

Link: https://lore.kernel.org/r/20220511095020.562461-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The error handling for the current tagging protocol change procedure is
a bit brittle (we dismantle the previous tagging protocol entirely
before setting up the new one). By identifying which parts of a tagging
protocol are unique to itself and which parts are shared with the other,
we can implement a protocol change procedure where error handling is a
bit more robust, because we start setting up the new protocol first, and
tear down the old one only after the setup of the specific and shared
parts succeeded.

The protocol change is a bit too open-coded too, in the area of
migrating host flood settings and MDBs. By identifying what differs
between tagging protocols (the forwarding masks for host flooding) we
can implement a more straightforward migration procedure which is
handled in the shared portion of the protocol change, rather than
individually by each protocol.

Therefore, a more structured approach calls for the introduction of a
structure of function pointers per tagging protocol. This covers setup,
teardown and the host forwarding mask. In the future it will also cover
how to prepare for a new DSA master.

The initial tagging protocol setup (at driver probe time) and the final
teardown (at driver removal time) are also adapted to call into the
structured methods of the specific protocol in current use. This is
especially relevant for teardown, where we previously called
felix_del_tag_protocol() only for the first CPU port. But by not
specifying which CPU port this is for, we gain more flexibility to
support multiple CPU ports in the future.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ocelot switches support a single active CPU port at a time (at least as
a trapping destination, i.e. for control traffic). This is true
regardless of whether we are using the native copy-to-CPU-port-module
functionality, or a redirect action towards the software-defined
tag_8021q CPU port.

Currently we assume that the trapping destination in tag_8021q mode is
the first CPU port, yet in the future we may want to migrate the user
ports to the second CPU port.

For that to work, we need to make sure that the tag_8021q trapping
destination is a CPU port that is active, i.e. is used by at least some
user port on which the trap was added. Otherwise, we may end up
redirecting the traffic to a CPU port which isn't even up.

Note that due to the current design where we simply choose the CPU port
of the first port from the trap's ingress port mask, it may be that a
CPU port absorbes control traffic from user ports which aren't affine to
it as per user space's request. This isn't ideal, but is the lesser of
two evils. Following the user-configured affinity for traps would mean
that we can no longer reuse a single TCAM entry for multiple traps,
which is what we actually do for e.g. PTP. Either we duplicate and
deduplicate TCAM entries on the fly when user-to-CPU-port mappings
change (which is unnecessarily complicated), or we redirect trapped
traffic to all tag_8021q CPU ports if multiple such ports are in use.
The latter would have actually been nice, if it actually worked, but it
doesn't, since a OCELOT_MASK_MODE_REDIRECT action towards multiple ports
would not take PGID_SRC into consideration, and it would just duplicate
the packet towards each (CPU) port, leading to duplicates in software.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

DSA has not supported (and probably will not support in the future
either) independent tagging protocols per CPU port.

Different switch drivers have different requirements, some may need to
replicate some settings for each CPU port, some may need to apply some
settings on a single CPU port, while some may have to configure some
global settings and then some per-CPU-port settings.

In any case, the current model where DSA calls ->change_tag_protocol for
each CPU port turns out to be impractical for drivers where there are
global things to be done. For example, felix calls dsa_tag_8021q_register(),
which makes no sense per CPU port, so it suppresses the second call.

Let drivers deal with replication towards all CPU ports, and remove the
CPU port argument from the function prototype.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

At the time - commit 7569459a ("net: dsa: manage flooding on the CPU
ports") - not introducing a dedicated switch callback for host flooding
made sense, because for the only user, the felix driver, there was
nothing different to do for the CPU port than set the flood flags on the
CPU port just like on any other bridge port.

There are 2 reasons why this approach is not good enough, however.

(1) Other drivers, like sja1105, support configuring flooding as a
    function of {ingress port, egress port}, whereas the DSA
    ->port_bridge_flags() function only operates on an egress port.
    So with that driver we'd have useless host flooding from user ports
    which don't need it.

(2) Even with the felix driver, support for multiple CPU ports makes it
    difficult to piggyback on ->port_bridge_flags(). The way in which
    the felix driver is going to support host-filtered addresses with
    multiple CPU ports is that it will direct these addresses towards
    both CPU ports (in a sort of multicast fashion), then restrict the
    forwarding to only one of the two using the forwarding masks.
    Consequently, flooding will also be enabled towards both CPU ports.
    However, ->port_bridge_flags() gets passed the index of a single CPU
    port, and that leaves the flood settings out of sync between the 2
    CPU ports.

This is to say, it's better to have a specific driver method for host
flooding, which takes the user port as argument. This solves problem (1)
by allowing the driver to do different things for different user ports,
and problem (2) by abstracting the operation and letting the driver do
whatever, rather than explicitly making the DSA core point to the CPU
port it thinks needs to be touched.

This new method also creates a problem, which is that cross-chip setups
are not handled. However I don't have hardware right now where I can
test what is the proper thing to do, and there isn't hardware compatible
with multi-switch trees that supports host flooding. So it remains a
problem to be tackled in the future.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Similar to dsa_user_ports() which retrieves a port mask of all user
ports, introduce dsa_cpu_ports() which retrieves the mask of all CPU
ports of a switch.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

For symmetry with host FDBs and MDBs where the indirection is now
handled outside the ocelot switch lib, do the same for bridge port
flags (unicast/multicast/broadcast flooding).

The only caller of the ocelot switch lib which uses the NPI port is the
Felix DSA driver.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

For symmetry with host FDBs where the indirection is now handled outside
the ocelot switch lib, do the same for host MDB entries. The only caller
of the ocelot switch lib which uses the NPI port is the Felix DSA driver.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

I remembered why we had the host FDB migration procedure in place.

It is true that host FDB entry migration can be done by changing the
value of PGID_CPU, but the problem is that only host FDB entries learned
while operating in NPI mode go to PGID_CPU. When the CPU port operates
in tag_8021q mode, the FDB entries are learned towards the unicast PGID
equal to the physical port number of this CPU port, bypassing the
PGID_CPU indirection.

So host FDB entries learned in tag_8021q mode are not migrated any
longer towards the NPI port.

Fix this by extracting the NPI port -> PGID_CPU redirection from the
ocelot switch lib, moving it to the Felix DSA driver, and applying it
for any CPU port regardless of its kind (NPI or tag_8021q).

Fixes: a51c1c3f ("net: dsa: felix: stop migrating FDBs back and forth on tag proto change")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The smatch found the following warning:

drivers/net/ethernet/microchip/lan966x/lan966x_fdma.c:736 lan966x_fdma_reload()
warn: 'rx_dcbs' was already freed.

This issue can happen when changing the MTU on one of the ports and once
the RX buffers are allocated and then the TX buffer allocation fails.
In that case the RX buffers should not be restore. This fix this issue
such that the RX buffers will not be restored if the TX buffers failed
to be allocated.

Fixes: 2ea1cbac ("net: lan966x: Update FDMA to change MTU.")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20220511204059.2689199-1-horatiu.vultur@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The BUGS section looks quite dated, the registration
is under rtnl lock. Remove some obvious information
while at it.

Link: https://lore.kernel.org/r/20220511190720.1401356-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Very few drivers actually have Kconfig knobs for adding
-DDEBUG. 8 according to a quick grep, while there are
93 users of skb_checksum_none_assert(). Switch to the
new DEBUG_NET_WARN_ON_ONCE() to catch bad skbs.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220511172305.1382810-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The driver currently has three interrupt counters,
which are incremented every time each interrupt handler
executes.  These driver-managed counters are not
necessary as the kernel already has logic that manages
interrupt counts and exposes them via /proc/interrupts.
This patch removes the driver-managed counters.
Signed-off-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Link: https://lore.kernel.org/r/20220511135251.2989-1-davthompson@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

No conflicts.

Build issue in drivers/net/ethernet/sfc/ptp.c
  54fccfdd ("sfc: efx_default_channel_type APIs can be static")
  49e6123c ("net: sfc: fix memory leak due to ptp channel")
https://lore.kernel.org/all/20220510130556.52598fe2@canb.auug.org.au/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from wireless, and bluetooth.

  No outstanding fires.

  Current release - regressions:

   - eth: atlantic: always deep reset on pm op, fix null-deref

  Current release - new code bugs:

   - rds: use maybe_get_net() when acquiring refcount on TCP sockets
     [refinement of a previous fix]

   - eth: ocelot: mark traps with a bool instead of guessing type based
     on list membership

  Previous releases - regressions:

   - net: fix skipping features in for_each_netdev_feature()

   - phy: micrel: fix null-derefs on suspend/resume and probe

   - bcmgenet: check for Wake-on-LAN interrupt probe deferral

  Previous releases - always broken:

   - ipv4: drop dst in multicast routing path, prevent leaks

   - ping: fix address binding wrt vrf

   - net: fix wrong network header length when BPF protocol translation
     is used on skbs with a fraglist

   - bluetooth: fix the creation of hdev->name

   - rfkill: uapi: fix RFKILL_IOCTL_MAX_SIZE ioctl request definition

   - wifi: iwlwifi: iwl-dbg: use del_timer_sync() before freeing

   - wifi: ath11k: reduce the wait time of 11d scan and hw scan while
     adding an interface

   - mac80211: fix rx reordering with non explicit / psmp ack policy

   - mac80211: reset MBSSID parameters upon connection

   - nl80211: fix races in nl80211_set_tx_bitrate_mask()

   - tls: fix context leak on tls_device_down

   - sched: act_pedit: really ensure the skb is writable

   - batman-adv: don't skb_split skbuffs with frag_list

   - eth: ocelot: fix various issues with TC actions (null-deref; bad
     stats; ineffective drops; ineffective filter removal)"

* tag 'net-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
  tls: Fix context leak on tls_device_down
  net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe()
  net/smc: non blocking recvmsg() return -EAGAIN when no data and signal_pending
  net: dsa: bcm_sf2: Fix Wake-on-LAN with mac_link_down()
  mlxsw: Avoid warning during ip6gre device removal
  net: bcmgenet: Check for Wake-on-LAN interrupt probe deferral
  net: ethernet: mediatek: ppe: fix wrong size passed to memset()
  Bluetooth: Fix the creation of hdev->name
  i40e: i40e_main: fix a missing check on list iterator
  net/sched: act_pedit: really ensure the skb is writable
  s390/lcs: fix variable dereferenced before check
  s390/ctcm: fix potential memory leak
  s390/ctcm: fix variable dereferenced before check
  net: atlantic: verify hw_head_ lies within TX buffer ring
  net: atlantic: add check for MAX_SKB_FRAGS
  net: atlantic: reduce scope of is_rsc_complete
  net: atlantic: fix "frag[0] not initialized"
  net: stmmac: fix missing pci_disable_device() on error in stmmac_pci_probe()
  net: phy: micrel: Fix incorrect variable type in micrel
  decnet: Use container_of() for struct dn_neigh casts
  ...

Pull cgroup fix from Tejun Heo:
 "Waiman's fix for a cgroup2 cpuset bug where it could miss nodes which
  were hot-added"

* 'for-5.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup/cpuset: Remove cpus_allowed/mems_allowed setup in cpuset_init_smp()

Pull fs fixes from Jan Kara:
 "Three fixes that I'd still like to get to 5.18:

   - add a missing sanity check in the fanotify FAN_RENAME feature
     (added in 5.17, let's fix it before it gets wider usage in
     userspace)

   - udf fix for recently introduced filesystem corruption issue

   - writeback fix for a race in inode list handling that can lead to
     delayed writeback and possible dirty throttling stalls"

* tag 'fixes_for_v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Avoid using stale lengthOfImpUse
  writeback: Avoid skipping inode writeback
  fanotify: do not allow setting dirent events in mask of non-dir

The commit cited below claims to fix a use-after-free condition after
tls_device_down. Apparently, the description wasn't fully accurate. The
context stayed alive, but ctx->netdev became NULL, and the offload was
torn down without a proper fallback, so a bug was present, but a
different kind of bug.

Due to misunderstanding of the issue, the original patch dropped the
refcount_dec_and_test line for the context to avoid the alleged
premature deallocation. That line has to be restored, because it matches
the refcount_inc_not_zero from the same function, otherwise the contexts
that survived tls_device_down are leaked.

This patch fixes the described issue by restoring refcount_dec_and_test.
After this change, there is no leak anymore, and the fallback to
software kTLS still works.

Fixes: c55dcdd4 ("net/tls: Fix use-after-free after the TLS device goes down and up")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20220512091830.678684-1-maximmi@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In the NIC ->probe() callback, ->mtd_probe() callback is called.
If NIC has 2 ports, ->probe() is called twice and ->mtd_probe() too.
In the ->mtd_probe(), which is efx_ef10_mtd_probe() it allocates and
initializes mtd partiion.
But mtd partition for sfc is shared data.
So that allocated mtd partition data from last called
efx_ef10_mtd_probe() will not be used.
Therefore it must be freed.
But it doesn't free a not used mtd partition data in efx_ef10_mtd_probe().

kmemleak reports:
unreferenced object 0xffff88811ddb0000 (size 63168):
  comm "systemd-udevd", pid 265, jiffies 4294681048 (age 348.586s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffffa3767749>] kmalloc_order_trace+0x19/0x120
    [<ffffffffa3873f0e>] __kmalloc+0x20e/0x250
    [<ffffffffc041389f>] efx_ef10_mtd_probe+0x11f/0x270 [sfc]
    [<ffffffffc0484c8a>] efx_pci_probe.cold.17+0x3df/0x53d [sfc]
    [<ffffffffa414192c>] local_pci_probe+0xdc/0x170
    [<ffffffffa4145df5>] pci_device_probe+0x235/0x680
    [<ffffffffa443dd52>] really_probe+0x1c2/0x8f0
    [<ffffffffa443e72b>] __driver_probe_device+0x2ab/0x460
    [<ffffffffa443e92a>] driver_probe_device+0x4a/0x120
    [<ffffffffa443f2ae>] __driver_attach+0x16e/0x320
    [<ffffffffa4437a90>] bus_for_each_dev+0x110/0x190
    [<ffffffffa443b75e>] bus_add_driver+0x39e/0x560
    [<ffffffffa4440b1e>] driver_register+0x18e/0x310
    [<ffffffffc02e2055>] 0xffffffffc02e2055
    [<ffffffffa3001af3>] do_one_initcall+0xc3/0x450
    [<ffffffffa33ca574>] do_init_module+0x1b4/0x700
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Fixes: 8127d661 ("sfc: Add support for Solarflare SFC9100 family")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20220512054709.12513-1-ap420073@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Non blocking sendmsg will return -EAGAIN when any signal pending
and no send space left, while non blocking recvmsg return -EINTR
when signal pending and no data received. This may makes confused.
As TCP returns -EAGAIN in the conditions described above. Align the
behavior of smc with TCP.

Fixes: 846e344e ("net/smc: add receive timeout check")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/20220512030820.73848-1-guangguan.wang@linux.alibaba.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

After commit 2d1f90f9 ("net: dsa/bcm_sf2: fix incorrect usage of
state->link") the interface suspend path would call our mac_link_down()
call back which would forcibly set the link down, thus preventing
Wake-on-LAN packets from reaching our management port.

Fix this by looking at whether the port is enabled for Wake-on-LAN and
not clearing the link status in that case to let packets go through.

Fixes: 2d1f90f9 ("net: dsa/bcm_sf2: fix incorrect usage of state->link")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220512021731.2494261-1-f.fainelli@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

IPv6 addresses which are used for tunnels are stored in a hash table
with reference counting. When a new GRE tunnel is configured, the driver
is notified and configures it in hardware.

Currently, any change in the tunnel is not applied in the driver. It
means that if the remote address is changed, the driver is not aware of
this change and the first address will be used.

This behavior results in a warning [1] in scenarios such as the
following:

 # ip link add name gre1 type ip6gre local 2000::3 remote 2000::fffe tos inherit ttl inherit
 # ip link set name gre1 type ip6gre local 2000::3 remote 2000::ffff ttl inherit
 # ip link delete gre1

The change of the address is not applied in the driver. Currently, the
driver uses the remote address which is stored in the 'parms' of the
overlay device. When the tunnel is removed, the new IPv6 address is
used, the driver tries to release it, but as it is not aware of the
change, this address is not configured and it warns about releasing non
existing IPv6 address.

Fix it by using the IPv6 address which is cached in the IPIP entry, this
address is the last one that the driver used, so even in cases such the
above, the first address will be released, without any warning.

[1]:

WARNING: CPU: 1 PID: 2197 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2920 mlxsw_sp_ipv6_addr_put+0x146/0x220 [mlxsw_spectrum]
...
CPU: 1 PID: 2197 Comm: ip Not tainted 5.17.0-rc8-custom-95062-gc1e5ded51a9a #84
Hardware name: Mellanox Technologies Ltd. MSN4700/VMOD0010, BIOS 5.11 07/12/2021
RIP: 0010:mlxsw_sp_ipv6_addr_put+0x146/0x220 [mlxsw_spectrum]
...
Call Trace:
 <TASK>
 mlxsw_sp2_ipip_rem_addr_unset_gre6+0xf1/0x120 [mlxsw_spectrum]
 mlxsw_sp_netdevice_ipip_ol_event+0xdb/0x640 [mlxsw_spectrum]
 mlxsw_sp_netdevice_event+0xc4/0x850 [mlxsw_spectrum]
 raw_notifier_call_chain+0x3c/0x50
 call_netdevice_notifiers_info+0x2f/0x80
 unregister_netdevice_many+0x311/0x6d0
 rtnl_dellink+0x136/0x360
 rtnetlink_rcv_msg+0x12f/0x380
 netlink_rcv_skb+0x49/0xf0
 netlink_unicast+0x233/0x340
 netlink_sendmsg+0x202/0x440
 ____sys_sendmsg+0x1f3/0x220
 ___sys_sendmsg+0x70/0xb0
 __sys_sendmsg+0x54/0xa0
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: e846efe2 ("mlxsw: spectrum: Add hash table for IPv6 address mapping")
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220511115747.238602-1-idosch@nvidia.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Simon Horman says:

====================
*nfp: VF rate limit support

this short series adds VF rate limiting to the NFP driver.

The first patch, as suggested by Jakub Kicinski, adds a helper
to check that ndo_set_vf_rate() rate parameters are sane.
It also provides a place for further parameter checking to live,
if needed in future.

The second patch adds VF rate limit support to the NFP driver.
It addresses several comments made on v1, including removing
the parameter check that is now provided by the helper added
in the first patch.
====================

Link: https://lore.kernel.org/r/20220511113932.92114-1-simon.horman@corigine.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Add VF rate limit feature

This patch enhances the NFP driver to supports assignment of
both max_tx_rate and min_tx_rate to VFs

The template of configurations below is all supported.
e.g.
 # ip link set $DEV vf $VF_NUM max_tx_rate $RATE_VALUE
 # ip link set $DEV vf $VF_NUM min_tx_rate $RATE_VALUE
 # ip link set $DEV vf $VF_NUM max_tx_rate $RATE_VALUE \
			       min_tx_rate $RATE_VALUE
 # ip link set $DEV vf $VF_NUM min_tx_rate $RATE_VALUE \
			       max_tx_rate $RATE_VALUE

The max RATE_VALUE is limited to 0xFFFF which is about
63Gbps (using 1024 for 1G)
Signed-off-by: Bin Chen <bin.chen@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When calling ndo_set_vf_rate() the max_tx_rate parameter may be zero,
in which case the setting is cleared, or it must be greater or equal to
min_tx_rate.

Enforce this requirement on all calls to ndo_set_vf_rate via a wrapper
which also only calls ndo_set_vf_rate() if defined by the driver.

Based on work by Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Bin Chen <bin.chen@corigine.com>
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

There is a spelling mistake in a dev_dbg message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220511104448.150800-1-colin.i.king@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Right now, a PHY-less port (no phy-mode, no fixed-link, no phy-handle)
doesn't register with phylink, but calls netif_carrier_on() from
enetc_start().

This makes sense for a VF, but for a PF, this is braindead, because we
never call enetc_mac_enable() so the MAC is left inoperational.
Furthermore, commit 71b77a7a ("enetc: Migrate to PHYLINK and
PCS_LYNX") put the nail in the coffin because it removed the initial
netif_carrier_off() call done right after register_netdev().

Without that call, netif_carrier_on() does not call
linkwatch_fire_event(), so the operstate remains IF_OPER_UNKNOWN.

Just deny the broken configuration by requiring that a phy-mode is
present, and always register a PF with phylink.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20220511094200.558502-1-vladimir.oltean@nxp.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

As we continue to narrow the scope of what the FORTIFY memcpy() will
accept and build alternative APIs that give the compiler appropriate
visibility into more complex memcpy scenarios, there is a need for
"unfortified" memcpy use in rare cases where combinations of compiler
behaviors, source code layout, etc, result in cases where the stricter
memcpy checks need to be bypassed until appropriate solutions can be
developed (i.e. fix compiler bugs, code refactoring, new API, etc). The
intention is for this to be used only if there's no other reasonable
solution, for its use to include a justification that can be used
to assess future solutions, and for it to be temporary.

Example usage included, based on analysis and discussion from:
https://lore.kernel.org/netdev/CANn89iLS_2cshtuXPyNUGDPaic=sJiYfvTb_wNLgWrZRyBxZ_g@mail.gmail.com

Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Coco Li <lixiaoyan@google.com>
Cc: Tariq Toukan <tariqt@nvidia.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: netdev@vger.kernel.org
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220511025301.3636666-1-keescook@chromium.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The interrupt controller supplying the Wake-on-LAN interrupt line maybe
modular on some platforms (irq-bcm7038-l1.c) and might be probed at a
later time than the GENET driver. We need to specifically check for
-EPROBE_DEFER and propagate that error to ensure that we eventually
fetch the interrupt descriptor.

Fixes: 9deb48b5 ("bcmgenet: add WOL IRQ check")
Fixes: 5b1f0e62 ("net: bcmgenet: Avoid touching non-existent interrupt")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20220511031752.2245566-1-f.fainelli@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

'foe_table' is a pointer, the real size of struct mtk_foe_entry
should be pass to memset().

Fixes: ba37b7ca ("net: ethernet: mtk_eth_soc: add support for initializing the PPE")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220511030829.3308094-1-yangyingliang@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - Fix the creation of hdev->name when index is greater than 9999

* tag 'for-net-2022-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: Fix the creation of hdev->name
====================

Link: https://lore.kernel.org/r/20220512002901.823647-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Kalle Valo says:

====================
wireless fixes for v5.18

Second set of fixes for v5.18 and hopefully the last one. We have a
new iwlwifi maintainer, a fix to rfkill ioctl interface and important
fixes to both stack and two drivers.

* tag 'wireless-2022-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  rfkill: uapi: fix RFKILL_IOCTL_MAX_SIZE ioctl request definition
  nl80211: fix locking in nl80211_set_tx_bitrate_mask()
  mac80211_hwsim: call ieee80211_tx_prepare_skb under RCU protection
  mac80211_hwsim: fix RCU protected chanctx access
  mailmap: update Kalle Valo's email
  mac80211: Reset MBSSID parameters upon connection
  cfg80211: retrieve S1G operating channel number
  nl80211: validate S1G channel width
  mac80211: fix rx reordering with non explicit / psmp ack policy
  ath11k: reduce the wait time of 11d scan and hw scan while add interface
  MAINTAINERS: update iwlwifi driver maintainer
  iwlwifi: iwl-dbg: Use del_timer_sync() before freeing
====================

Link: https://lore.kernel.org/r/20220511154535.A1A12C340EE@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Set a size limit of 8 bytes of the written buffer to "hdev->name"
including the terminating null byte, as the size of "hdev->name" is 8
bytes. If an id value which is greater than 9999 is allocated,
then the "snprintf(hdev->name, sizeof(hdev->name), "hci%d", id)"
function call would lead to a truncation of the id value in decimal
notation.

Set an explicit maximum id parameter in the id allocation function call.
The id allocation function defines the maximum allocated id value as the
maximum id parameter value minus one. Therefore, HCI_MAX_ID is defined
as 10000.
Signed-off-by: Itay Iellin <ieitayie@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Vladimir Oltean says:

====================
Count tc-taprio window drops in enetc driver

This series includes a patch from Po Liu (no longer with NXP) which
counts frames dropped by the tc-taprio offload in ethtool -S and in
ndo_get_stats64. It also contains a preparation patch from myself.
====================

Link: https://lore.kernel.org/r/20220510163615.6096-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>