Controller needs to ensure display power is enabled only for
HDA controller reset. Drop the display power-up/down calls from
D0i3 entry/exit paths.

This was previously not possible as codec drivers could not resume the
links, and instead controller kept the reference to display power. The
state of display power had be maintained in the D0i3 entry/exit code.
With commit 87fc20e4 ("ASoC: SOF: Intel: hda: use hdac_ext
fine-grained link management"), this is no longer needed and the code
can be cleaned up.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Keyon Jie <yang.jie@intel.com>
Link: https://lore.kernel.org/r/20210322143830.3880293-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

We should use the topology configured mclk if it existed, which can make
sure we are aligned with the FW side about the mclk usage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210319124950.3853994-2-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add helper sof_dai_ssp_mclk to get the topology configured MCLK from a
pcm_runtime, return 0 if it is not available, and error if the dai type
is not SSP at the moment.

Export the helper for external use, e.g. from machine drivers.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210319124950.3853994-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

When there is power domain bind with bus clock,

The call flow:
devm_regmap_init_mmio_clk
   - clk_prepare()
      - clk_pm_runtime_get()

cause the power domain of clock always be enabled after
regmap_init(). which impact the power consumption.

So use devm_regmap_init_mmio instead of
devm_regmap_init_mmio_clk, then explicitly enable clock when
using by pm_runtime_get(), if CONFIG_PM=n, then
fsl_sai_runtime_resume will be explicitly called.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Link: https://lore.kernel.org/r/1616141203-13344-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add support for RT5682 codec in machine driver.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/1616118056-5506-1-git-send-email-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: tidyup error message timing" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:

Hi Mark

Indicating error message when failed case is very useful for debuging.
In many case, it uses below style.

	int function(...)
	{
		...
		return ret;
	}

	int caller(...)
	{
		...
		ret = function(...);
		if (ret < 0)
			dev_err(...)
		...
	}

This is not so bad, but in this style *each caller* needs to indicate
duplicate same error message, and some caller is forgetting to do it.
And caller can't indicate detail function() error information.

I know many people have many opinion, but if function() indicates error
message, we can get same and detail information without forgot, and it is better.
This patch-set tidyup to do it.

	int function(...)
	{
		...
		if (ret < 0)
			dev_err(...)

		return ret;
	}

	int caller(...)
	{
		...
		ret = function(...);
		...
	}

Kuninori Morimoto (14):
  ASoC: soc-pcm: indicate error message at soc_pcm_open()
  ASoC: soc-pcm: indicate error message at soc_pcm_hw_params()
  ASoC: soc-pcm: indicate error message at soc_pcm_prepare()
  ASoC: soc-pcm: indicate error message at dpcm_path_get()
  ASoC: soc-pcm: indicate error message at dpcm_be_dai_trigger()
  ASoC: soc-pcm: indicate error message at dpcm_apply_symmetry()
  ASoC: soc-pcm: indicate error message at dpcm_run_update_startup/shutdown()
  ASoC: soc-pcm: indicate error message at dpcm_fe/be_dai_startup()
  ASoC: soc-pcm: indicate error message at dpcm_fe/be_dai_hw_params()
  ASoC: soc-pcm: indicate error message at dpcm_fe/be_dai_prepare()
  ASoC: soc-pcm: don't indicate error message for soc_pcm_hw_free()
  ASoC: soc-pcm: don't indicate error message for dpcm_be_dai_hw_free()
  ASoC: don't indicate error message for snd_soc_[pcm_]dai_xxx()
  ASoC: don't indicate error message for snd_soc_[pcm_]component_xxx()

 include/sound/soc-dpcm.h |   2 +-
 sound/soc/soc-compress.c |   9 +-
 sound/soc/soc-core.c     |  22 +----
 sound/soc/soc-dapm.c     |  24 ++---
 sound/soc/soc-pcm.c      | 197 +++++++++++++++++++--------------------
 5 files changed, 108 insertions(+), 146 deletions(-)

--
2.25.1

The sparse tool complains as follows:

sound/soc/codecs/rt1019.c:927:19: warning:
 symbol 'rt1019_i2c_driver' was not declared. Should it be static?

This symbol is not used outside of rt1019.c, so this
commit marks it static.

Fixes: 7ec79d38 ("ASoC: rt1019: add rt1019 amplifier driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210319094102.4185096-1-weiyongjun1@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

All snd_soc_component_xxx() and snd_soc_pcm_component_xxx() itself
indicate error message if failed.
Its caller doesn't need to indicate duplicated error message.
This patch removes it.

All snd_soc_component_xxx() indicate error message if failed.
Its caller doesn't need to indicate duplicated error message.
This patch removes it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878s6puta6.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

All snd_soc_dai_xxx() and snd_soc_pcm_dai_xxx() itself
indicate error message if failed.
Its caller doesn't need to indicate duplicated error message.
This patch removes it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6r5utaa.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

dpcm_be_dai_hw_free() never fail, error message is not needed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blblutaf.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

soc_pcm_hw_free() never fail, error message is not needed.
We can't use void function for it, because it is used
part of struct snd_pcm_ops :: hw_free.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87czw1utaj.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Indicating error message when failed case is very useful for debuging.
In many case, its style is like below.

	int function(...)
	{
		...
		return ret;
	}

	int caller(...)
	{
		...
		ret = function(...);
		if (ret < 0)
			dev_err(...)
		...
	}

This is not so bad, but in this style *each caller* needs to indicate
duplicate same error message, and some caller is forgetting to do it.
And caller can't indicate detail function() error information.

If function() indicates error message, we can get same and
detail information without forgot.

	int function(...)
	{
		...
		if (ret < 0)
			dev_err(...)

		return ret;
	}

	int caller(...)
	{
		...
		ret = function(...);
		...
	}

This patch follow above style at dpcm_fe/be_dai_prepare()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87eeghutap.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Indicating error message when failed case is very useful for debuging.
In many case, its style is like below.

	int function(...)
	{
		...
		return ret;
	}

	int caller(...)
	{
		...
		ret = function(...);
		if (ret < 0)
			dev_err(...)
		...
	}

This is not so bad, but in this style *each caller* needs to indicate
duplicate same error message, and some caller is forgetting to do it.
And caller can't indicate detail function() error information.

If function() indicates error message, we can get same and
detail information without forgot.

	int function(...)
	{
		...
		if (ret < 0)
			dev_err(...)

		return ret;
	}

	int caller(...)
	{
		...
		ret = function(...);
		...
	}

This patch follow above style at dpcm_fe/be_dai_hw_params()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ft0xutat.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Indicating error message when failed case is very useful for debuging.
In many case, its style is like below.

	int function(...)
	{
		...
		return ret;
	}

	int caller(...)
	{
		...
		ret = function(...);
		if (ret < 0)
			dev_err(...)
		...
	}

This is not so bad, but in this style *each caller* needs to indicate
duplicate same error message, and some caller is forgetting to do it.
And caller can't indicate detail function() error information.

If function() indicates error message, we can get same and
detail information without forgot.

	int function(...)
	{
		...
		if (ret < 0)
			dev_err(...)

		return ret;
	}

	int caller(...)
	{
		...
		ret = function(...);
		...
	}

This patch follow above style at dpcm_fe/be_dai_startup().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h7ldutay.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Indicating error message when failed case is very useful for debuging.
In many case, its style is like below.

	int function(...)
	{
		...
		return ret;
	}

	int caller(...)
	{
		...
		ret = function(...);
		if (ret < 0)
			dev_err(...)
		...
	}

This is not so bad, but in this style *each caller* needs to indicate
duplicate same error message, and some caller is forgetting to do it.
And caller can't indicate detail function() error information.

If function() indicates error message, we can get same and
detail information without forgot.

	int function(...)
	{
		...
		if (ret < 0)
			dev_err(...)

		return ret;
	}

	int caller(...)
	{
		...
		ret = function(...);
		...
	}

This patch also
do below to dpcm_run_update_startup()
	1) remove duplicated ret = -EINVAL
	2) remove blank line
do below to dpcm_run_update_shutdown()
	1) remove unused ret
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87im5tutb3.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Indicating error message when failed case is very useful for debuging.
In many case, its style is like below.

	int function(...)
	{
		...
		return ret;
	}

	int caller(...)
	{
		...
		ret = function(...);
		if (ret < 0)
			dev_err(...)
		...
	}

This is not so bad, but in this style *each caller* needs to indicate
duplicate same error message, and some caller is forgetting to do it.
And caller can't indicate detail function() error information.

If function() indicates error message, we can get same and
detail information without forgot.

	int function(...)
	{
		...
		if (ret < 0)
			dev_err(...)

		return ret;
	}

	int caller(...)
	{
		...
		ret = function(...);
		...
	}

This patch follow above style at dpcm_apply_symmetry(...)
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k0q9utb9.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Indicating error message when failed case is very useful for debuging.
In many case, its style is like below.

	int function(...)
	{
		...
		return ret;
	}

	int caller(...)
	{
		...
		ret = function(...);
		if (ret < 0)
			dev_err(...)
		...
	}

This is not so bad, but in this style *each caller* needs to indicate
duplicate same error message, and some caller is forgetting to do it.
And caller can't indicate detail function() error information.

If function() indicates error message, we can get same and
detail information without forgot.

	int function(...)
	{
		...
		if (ret < 0)
			dev_err(...)

		return ret;
	}

	int caller(...)
	{
		...
		ret = function(...);
		...
	}

Now, dpcm_be_dai_trigger() user uses it like below.

	err = dpcm_be_dai_trigger(...);
	if (err < 0)
		dev_err(..., "ASoC: trigger FE failed %d\n", err);

But we can get more detail information if dpcm_be_dai_trigger() itself
had dev_err(). And above error message is confusable,
failed is *BE*, not *FE*.

This patch indicates error message at dpcm_be_dai_trigger().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lfaputbe.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Indicating error message when failed case is very useful for debuging.
In many case, its style is like below.

	int function(...)
	{
		...
		return ret;
	}

	int caller(...)
	{
		...
		ret = function(...);
		if (ret < 0)
			dev_err(...)
		...
	}

This is not so bad, but in this style *each caller* needs to indicate
duplicate same error message, and some caller is forgetting to do it.
And caller can't indicate detail function() error information.

If function() indicates error message, we can get same and
detail information without forgot.

	int function(...)
	{
		...
		if (ret < 0)
			dev_err(...)

		return ret;
	}

	int caller(...)
	{
		...
		ret = function(...);
		...
	}

Now, many place uses dpcm_path_get() like below

	ret = dpcm_path_get(...);
	if (ret < 0)
		goto error;
(A)	else if (ret == 0)
		dev_dbg(...)

But here, (A) part can be indicated at dpcm_path_get() not caller.
It is simple and readable code.

This patch do it.
Small detail behaviors will be exchanged by this patch.

	1) indicates debug info (= path numbers) if path > 0 case only
	   (It was *always* indicated).
	2) soc_dpcm_fe_runtime_update() is indicating error message
	   for paths < 0 case, but it is already done at dpcm_path_get().
	   Thus just remove it. but dev_dbg() vs dev_warn() is exchanged.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87mtv5utbj.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Indicating error message when failed case is very useful for debuging.
In many case, its style is like below.

	int function(...)
	{
		...
		return ret;
	}

	int caller(...)
	{
		...
		ret = function(...);
		if (ret < 0)
			dev_err(...)
		...
	}

This is not so bad, but in this style *each caller* needs to indicate
duplicate same error message, and some caller is forgetting to do it.
And caller can't indicate detail function() error information.

If function() indicates error message, we can get same and
detail information without forgot.

	int function(...)
	{
		...
		if (ret < 0)
			dev_err(...)

		return ret;
	}

	int caller(...)
	{
		...
		ret = function(...);
		...
	}

This patch follow above style at soc_pcm_prepare().

By this patch, dpcm_fe/be_dai_prepare(...)
temporary lacks FE/BE error info, but it will reborn soon.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o8flutbn.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Indicating error message when failed case is very useful for debuging.
In many case, its style is like below.

	int function(...)
	{
		...
		return ret;
	}

	int caller(...)
	{
		...
		ret = function(...);
		if (ret < 0)
			dev_err(...)
		...
	}

This is not so bad, but in this style *each caller* needs to indicate
duplicate same error message, and some caller is forgetting to do it.
And caller can't indicate detail function() error information.

If function() indicates error message, we can get same and
detail information without forgot.

	int function(...)
	{
		...
		if (ret < 0)
			dev_err(...)

		return ret;
	}

	int caller(...)
	{
		...
		ret = function(...);
		...
	}

This patch follow above style at soc_pcm_hw_params().

By this patch, dpcm_fe/be_dai_hw_params(...)
temporary lacks FE/BE error info, but it will reborn soon.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pn01utbt.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Indicating error message when failed case is very useful for debuging.
In many case, its style is like below.

	int function(...)
	{
		...
		return ret;
	}

	int caller(...)
	{
		...
		ret = function(...);
		if (ret < 0)
			dev_err(...)
		...
	}

This is not so bad, but in this style *each caller* needs to indicate
duplicate same error message, and some caller is forgetting to do it.
And caller can't indicate detail function() error information.

If function() indicates error message, we can get same and
detail information without forgot.

	int function(...)
	{
		...
		if (ret < 0)
			dev_err(...)

		return ret;
	}

	int caller(...)
	{
		...
		ret = function(...);
		...
	}

This patch follow above style at soc_pcm_open().

By this patch, dpcm_fe/be_dai_startup(...)
temporary lacks FE/BE error info, but it will reborn soon.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r1khutby.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: codecs: remove cppcheck warnings" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

Lots of small fixes in various codec drivers that should have no
functional impact.

Pierre-Louis Bossart (23):
  ASoC: ab8500-codec: remove useless structure
  ASoC: ad1836: remove useless return
  ASoC: adau1977: remove useless return
  ASoC: cros_ec_codec: remove null pointer dereference warning
  ASoC: cx2070x: remove useless assignment
  ASoC: cx2070x: remove duplicate else branch
  ASoC: da7219-aad: remove useless initialization
  ASoC: hdac_hdmi: remove useless initializations
  ASoC: hdac_hdmi: align function arguments
  ASoC: hdmi-codec: remove useless initialization
  ASoC: hdmi-codec: remove unused spk_mask member
  ASoC: max98090: remove useless assignment
  ASoC: mt6358: remove useless initializations
  ASoC: mt6359: remove useless assignment
  ASoC: nau8825: remove useless assignment
  ASoC: pcm1681: remove useless assignment
  ASoC: sigmadsp: align function prototype
  ASoC: sti-sas: remove unused struct members
  ASoC: tas2562: remove useless assignment
  ASoC: tas2562: remove warning on return value
  ASoC: tas2770: remove useless initialization
  ASoC: tlv320dac33: clarify expression
  ASoC: tscs454: remove useless test on PLL disable

 sound/soc/codecs/ab8500-codec.c  |  7 -------
 sound/soc/codecs/ad1836.c        |  2 --
 sound/soc/codecs/adau1977.c      |  2 --
 sound/soc/codecs/cros_ec_codec.c |  2 +-
 sound/soc/codecs/cx2072x.c       | 11 ++++-------
 sound/soc/codecs/da7219-aad.c    |  2 +-
 sound/soc/codecs/hdac_hdmi.c     | 14 +++++++-------
 sound/soc/codecs/hdac_hdmi.h     |  2 +-
 sound/soc/codecs/hdmi-codec.c    |  3 +--
 sound/soc/codecs/max98090.c      |  2 +-
 sound/soc/codecs/mt6358.c        |  4 ++--
 sound/soc/codecs/mt6359.c        |  4 ++--
 sound/soc/codecs/nau8825.c       |  2 +-
 sound/soc/codecs/pcm1681.c       |  2 +-
 sound/soc/codecs/sigmadsp.h      |  2 +-
 sound/soc/codecs/sti-sas.c       |  3 ---
 sound/soc/codecs/tas2562.c       |  3 +--
 sound/soc/codecs/tas2770.c       |  2 +-
 sound/soc/codecs/tlv320dac33.c   |  2 +-
 sound/soc/codecs/tscs454.c       |  7 ++++++-
 20 files changed, 32 insertions(+), 46 deletions(-)

--
2.25.1

Merge series "Fix reset controls and RPM of NVIDIA Tegra ASoC drivers" from Dmitry Osipenko <digetx@gmail.com>:

Hi,

This series adds missing hardware reset controls to I2S and AC97 drivers,
corrects runtime PM usage and drivers probe/remove order. Currently drivers
happen to work properly because reset is implicitly deasserted by tegra-clk
driver, but clk driver shouldn't touch the resets and we need to fix it
because this breaks other Tegra drivers. Previously we fixed the resets of
the AHUB and HDMI codec drivers, but turned out that we missed the I2C and
AC97 drivers.

Thanks to Paul Fertser for testing the pending clk patches and finding
that audio got broken on Tegra20 AC100 netbook because of the missing I2S
reset.

Changelog:

v5: - After taking another look at the drivers I noticed couple more
      things that could be improved. These new patches correct runtime PM
      and probe/remove order of the drivers:

        ASoC: tegra20: spdif: Correct driver removal order
        ASoC: tegra20: spdif: Remove handing of disabled runtime PM
        ASoC: tegra20: i2s: Add system level suspend-resume callbacks
        ASoC: tegra20: i2s: Correct driver removal order
        ASoC: tegra20: i2s: Use devm_clk_get()
        ASoC: tegra20: i2s: Remove handing of disabled runtime PM
        ASoC: tegra30: i2s: Correct driver removal order
        ASoC: tegra30: i2s: Use devm_clk_get()
        ASoC: tegra30: i2s: Remove handing of disabled runtime PM
        ASoC: tegra30: ahub: Reset global variable
        ASoC: tegra30: ahub: Correct suspend-resume callbacks
        ASoC: tegra30: ahub: Remove handing of disabled runtime PM

v4: - Added missing prototype for reset_control_bulk_put().

v3: - Fixed reset stubs for !CONFIG_RESET_CONTROLLER.

v2: - After some more testing I found that I2S control logic doesn't require
      I2S clock to be enabled for resetting. Hence it's fine to have I2S to
      be reset by parent AHUB driver, so I dropped "tegra30: i2s: Add reset
      control" patch.

    - While I was double-checking resets on Tegra30, I found that that
      Tegra30 I2S driver has a broken runtime PM which doesn't restore
      hardware state on resume and it's lost after AHUB RPM-resume.
      Thus, added this new patch "tegra30: i2s: Restore hardware state
      on runtime PM resume".

    - Added new patches which switch AHUB driver to use reset-bulk API.
      I took the RFC patch from Philipp Zabel, fixed it and added
      devm_reset_control_bulk_optional_get_exclusive_released() that
      will be useful for further Tegra GPU patches. This is a minor
      improvement which makes code cleaner.

Dmitry Osipenko (16):
  ASoC: tegra20: ac97: Add reset control
  ASoC: tegra20: i2s: Add reset control
  ASoC: tegra30: i2s: Restore hardware state on runtime PM resume
  ASoC: tegra30: ahub: Switch to use reset-bulk API
  ASoC: tegra20: spdif: Correct driver removal order
  ASoC: tegra20: spdif: Remove handing of disabled runtime PM
  ASoC: tegra20: i2s: Add system level suspend-resume callbacks
  ASoC: tegra20: i2s: Correct driver removal order
  ASoC: tegra20: i2s: Use devm_clk_get()
  ASoC: tegra20: i2s: Remove handing of disabled runtime PM
  ASoC: tegra30: i2s: Correct driver removal order
  ASoC: tegra30: i2s: Use devm_clk_get()
  ASoC: tegra30: i2s: Remove handing of disabled runtime PM
  ASoC: tegra30: ahub: Reset global variable
  ASoC: tegra30: ahub: Correct suspend-resume callbacks
  ASoC: tegra30: ahub: Remove handing of disabled runtime PM

Philipp Zabel (1):
  reset: Add reset_control_bulk API

 drivers/reset/core.c            | 215 ++++++++++++++++++++++
 include/linux/reset.h           | 315 ++++++++++++++++++++++++++++++++
 sound/soc/tegra/tegra20_ac97.c  |  21 +++
 sound/soc/tegra/tegra20_ac97.h  |   1 +
 sound/soc/tegra/tegra20_i2s.c   |  60 +++---
 sound/soc/tegra/tegra20_i2s.h   |   1 +
 sound/soc/tegra/tegra20_spdif.c |  16 +-
 sound/soc/tegra/tegra30_ahub.c  | 168 ++++++-----------
 sound/soc/tegra/tegra30_ahub.h  |   5 +-
 sound/soc/tegra/tegra30_i2s.c   |  65 ++-----
 10 files changed, 667 insertions(+), 200 deletions(-)

--
2.30.2

base-commit: a38fd874

This patch adds jsl_rt5682_rt1015p which supports the RT5682 headset
codec and ALC1015Q-VB speaker amplifier combination on JasperLake
platform.

This driver also supports ALC1015Q-CG if running in auto-mode.
Following table shows the audio interface support of the two
amplifiers.

          | ALC1015Q-CG | ALC1015Q-VB
=====================================
I2C       | Yes         | No
Auto-mode | 48K, 64fs   | 16k, 32fs
                        | 48k, 32fs
                        | 48k, 64fs
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210317110824.20814-1-brent.lu@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

This is initial amplifier driver for rt1019.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20210311025809.31852-1-jack.yu@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

s/drving/driving/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210313231850.17278-1-unixbhaskar@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

sound/soc/intel/skylake/skl-topology.c:3613:13: warning: stack frame
size of 1304 bytes in function 'skl_tplg_complete'
[-Wframe-larger-than=]

struct snd_ctl_elem_value is 1224 bytes in my configuration.

Heap allocate it, then free it within the current frame.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Link: https://lore.kernel.org/r/20210315013908.217219-1-nick.desaulniers@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

cppcheck warning:

sound/soc/codecs/tscs454.c:730:37: style: Same value in both branches
of ternary operator. [duplicateValueTernary]
  val = pll1 ? FV_PLL1CLKEN_DISABLE : FV_PLL2CLKEN_DISABLE;
                                    ^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-24-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

cppcheck warning:

sound/soc/codecs/tlv320dac33.c:1074:43: style: Clarify calculation
precedence for '%' and '?'. [clarifyCalculation]
    (dac33->alarm_threshold % period_size ?
                                          ^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-23-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

cppcheck warning:

sound/soc/codecs/tas2770.c:109:10: style: Variable 'ret' is assigned a
value that is never used. [unreadVariable]
 int ret = 0;
         ^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-22-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

cppcheck warning:

sound/soc/codecs/tas2562.c:530:9: warning: Identical condition and return expression 'ret', return value is always 0 [identicalConditionAfterEarlyExit]
 return ret;
        ^
sound/soc/codecs/tas2562.c:525:6: note: If condition 'ret' is true, the function will return/exit
 if (ret)
     ^
sound/soc/codecs/tas2562.c:530:9: note: Returning identical expression 'ret'
 return ret;
        ^

Fix with return 0
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-21-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

cppcheck throws a warning:

sound/soc/codecs/tas2562.c:203:4: style: Assignment of function
parameter has no effect outside the function. [uselessAssignmentArg]
   tx_mask &= ~(1 << right_slot);
   ^

This assignment seems to come from a copy/paste but the value is
indeed not used. Let's remove it.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-20-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

cppcheck warnings:

sound/soc/codecs/sti-sas.c:54:25: style: struct member
'sti_dac_audio::field' is never used. [unusedStructMember]
 struct regmap_field  **field;
                        ^

sound/soc/codecs/sti-sas.c:55:24: style: struct member
'sti_dac_audio::rst' is never used. [unusedStructMember]
 struct reset_control *rst;
                       ^

sound/soc/codecs/sti-sas.c:61:25: style: struct member
'sti_spdif_audio::field' is never used. [unusedStructMember]
 struct regmap_field  **field;
                        ^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-19-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

cppcheck warning:

sound/soc/codecs/sigmadsp.c:736:60: style:inconclusive: Function
'sigmadsp_setup' argument 2 names different: declaration 'rate'
definition 'samplerate'. [funcArgNamesDifferent]
int sigmadsp_setup(struct sigmadsp *sigmadsp, unsigned int samplerate)
                                                           ^

sound/soc/codecs/sigmadsp.h:62:60: note: Function 'sigmadsp_setup'
argument 2 names different: declaration 'rate' definition
'samplerate'.
int sigmadsp_setup(struct sigmadsp *sigmadsp, unsigned int rate);
                                                           ^

sound/soc/codecs/sigmadsp.c:736:60: note: Function 'sigmadsp_setup'
argument 2 names different: declaration 'rate' definition
'samplerate'.
int sigmadsp_setup(struct sigmadsp *sigmadsp, unsigned int samplerate)
                                                           ^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-18-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

cppcheck warning:

sound/soc/codecs/pcm1681.c:87:8: style: Variable 'i' is assigned a
value that is never used. [unreadVariable]
 int i = 0, val = -1, enable = 0;
       ^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-17-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

cppcheck warning:

sound/soc/codecs/nau8825.c:2113:10: style: Variable 'ret' is assigned
a value that is never used. [unreadVariable]
 int ret = 0;
         ^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-16-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

cppcheck warning:

sound/soc/codecs/mt6359.c:242:19: style: Variable 'stage' is assigned a value that is never used. [unreadVariable]
 int i = 0, stage = 0;
                  ^
sound/soc/codecs/mt6359.c:260:19: style: Variable 'stage' is assigned a value that is never used. [unreadVariable]
 int i = 0, stage = 0;
                  ^
sound/soc/codecs/mt6359.c:274:8: style: Variable 'i' is assigned a value that is never used. [unreadVariable]
 int i = 0, stage = 0;
       ^
sound/soc/codecs/mt6359.c:274:19: style: Variable 'stage' is assigned a value that is never used. [unreadVariable]
 int i = 0, stage = 0;
                  ^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-15-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

cppcheck warnings:

sound/soc/codecs/mt6358.c:334:19: style: Variable 'stage' is assigned
a value that is never used. [unreadVariable]
 int i = 0, stage = 0;
                  ^
sound/soc/codecs/mt6358.c:350:19: style: Variable 'stage' is assigned
a value that is never used. [unreadVariable]
 int i = 0, stage = 0;
                  ^
185/930 files checked 25% done
Checking sound/soc/codecs/mt6359.c ...
sound/soc/codecs/mt6359.c:274:8: style: Variable 'i' is assigned a
value that is never used. [unreadVariable]
 int i = 0, stage = 0;
       ^
sound/soc/codecs/mt6359.c:274:19: style: Variable 'stage' is assigned
a value that is never used. [unreadVariable]
 int i = 0, stage = 0;
                  ^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-14-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

cppcheck warning:

sound/soc/codecs/max98090.c:1835:16: style: Variable 'test_diff' is
assigned a value that is never used. [unreadVariable]
 int test_diff = INT_MAX;
               ^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-13-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

fix cppcheck warning:

sound/soc/codecs/hdmi-codec.c:25:16: style: struct member
'hdmi_codec_channel_map_table::spk_mask' is never
used. [unusedStructMember]
 unsigned long spk_mask;  /* speaker position bit mask */
               ^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-12-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>